A sustainable route for the recovery of metals from waste printed circuit boards using methanesulfonic acid

Green Deep Eutectic Solvents (DESs) for Sustainable Metal Recovery from Thermally Treated PCBs: A Greener Alternative to Conventional Methods

Waste PCBs the core of e-waste is rich in copper, tin, zinc, iron, and nickel. Leaching base metals from PCB used to be done in toxic, corrosive acidic/alkali mediums. In this work, an environmentally friendly method for leaching metals from thermally treated PCBs (TPCBs) of mobile phones was proposed using choline chloride based deep eutectic solvents (DES). DES selectivity and solubility of metals from metal oxides were the main screening criteria. FA-ChCl had the maximum solubility of Cu, Fe, and Ni, while Urea-ChCl had high Zn selectivity and solubility. Oxalic acid has high selectivity for Sn. FA-ChCl extracted Cu and Fe best at 16 h, 100 °C, and 1/30 g/mL. Urea-ChCl extracted Zn (90.4±2.9 %) from TPCBs at 100 °C, 21 h, 1/20 g/mL, and 400 rpm. Oxalic acid (1 M) removed 92.3±2.1 % Sn from TPCBs in 1 h at 80 °C and 1/20 g/mL. The shrinking core model-based kinetic investigation of FA-ChCl for Cu extraction showed a diffusion-controlled process. The proposed method is greener than mineral acids utilized for metal extraction.

Review on the gentle hydrometallurgical treatment of WPCBs: Sustainable and selective gradient process for multiple valuable metals recovery

The metal resource crisis and the inherent need for a low-carbon circular economy have driven the rapid development of e-waste recycling technology. High-value waste printed circuit boards (WPCBs) are an essential component of e-waste. However, WPCBs are considered hazardous to the ecosystem due to the presence of heavy metals and brominated organic polymers. Therefore, achieving the recycling of metals in WPCBs is not only a strategic requirement for building a green ecological civilization but also an essential guarantee for achieving a safe supply of mineral resources. This review systematically analyzes the hydrometallurgical technology of metals in WPCBs in recent years. Firstly, the different unit operations of pretreatment in the hydrometallurgical process, which contain disassembly, crushing, and pre-enrichment, were analyzed. Secondly, environmentally friendly hydrometallurgical leaching systems and high-value product regeneration technologies used in recent years to recover metals from WPCBs were evaluated. The leaching techniques, including cyanidation, halide, thiourea, and thiosulfate for precious metals, and inorganic acid, organic acid, and other leaching methods for base metals such as copper and nickel in WPCBs, were outlined, and the leaching performance and greenness of each leaching system were summarized and analyzed. Eventually, based on the advantages of each leaching system and the differences in chemical properties of metals in WPCBs, an integrated and multi-gradient green process for the recovery of WPCBs was proposed, which provides a sustainable pathway for the recovery of metals in WPCBs. This paper provides a reference for realizing the gradient hydrometallurgical recovery of metals from WPCBs to promote the recycling metal resources.