Review of the progress in preparing nano TiO2: an important environmental engineering material

Synthesis of Fe2O3/TiO2 Photocatalytic Composites for Methylene Blue Degradation as a Novel Strategy for High-Value Utilisation of Iron Scales

In this study, novel Fe2O3/TiO2 photocatalytic composites were synthesised by combining traditional oxidation roasting with the sol-gel method, using low-cost metallurgical waste (iron scales) as the raw material. The characterisation results revealed that the oxidised iron scales could be transformed into high-purity and porous Fe2O3 particles through oxidation roasting, thereby providing additional sites for the adsorption process and thus serving as an effective carrier for TiO2-based photocatalytic materials. During the sol-gel process, TiO2 was loaded onto the synthesised Fe2O3 particles, generating core-shell heterostructure Fe2O3/TiO2 photocatalytic composites. Under visible light irradiation for 90 min, the Fe2O3/TiO2 photocatalytic composites achieved a remarkable methylene blue removal rate (97.71%). This reaction process followed the quasi-first-order kinetic model with a rate constant of 0.038 min-1. The results have demonstrated that this combination of various components in the Fe2O3/TiO2 photocatalytic composites improved the adsorption, light utilisation, and charge separation effect of the photocatalysts. Moreover, the material exhibited favourable stability and recyclability, making it a decent candidate for the treatment of wastewater from the biochemical industry. Therefore, this study provides a new strategy for improving the photocatalytic activity of TiO2 and expanding the high value-added utilisation of iron scales.

Progress of Nanomaterials Based on Manganese Dioxide in the Field of Tumor Diagnosis and Therapy

As a pivotal transition metal oxide, manganese dioxide (MnO2) has garnered significant attention owing to its abundant reserves, diverse crystal structures and exceptional performance. Nanosizing MnO2 results in smaller particle sizes, larger specific surface areas, optimized material characteristics, and expanded application possibilities. With the burgeoning research efforts in this field, MnO2 has emerged as a promising nanomaterial for tumor diagnosis and therapy. The distinctive properties of MnO2 in regulating the tumor microenvironment (TME) have attracted considerable interest, leading to a rapid growth in research on MnO2-based nanomaterials for tumor diagnosis and treatment. Additionally, MnO2 nanomaterials are also gradually showing up in the regulation of chronic inflammatory diseases. In this review, we mainly summarized the recent advancements in various MnO2 nanomaterials for tumor diagnosis and therapy. Furthermore, we discuss the current challenges and future directions in the development of MnO2 nanomaterials, while also envisaging their potential for clinical translation.

Thermal and/or Microwave Treatment: Insight into the Preparation of Titania-Based Materials for CO2 Photoreduction to Green Chemicals

Titanium dioxide was synthesized via hydrolysis of titanium (IV) isopropoxide using a sol-gel method, under neutral or basic conditions, and heated in the microwave-assisted solvothermal reactor and/or high-temperature furnace. The phase composition of the prepared samples was determined using the X-ray diffraction method. The specific surface area and pore volumes were determined through low-temperature nitrogen adsorption/desorption studies. The photoactivity of the samples was tested through photocatalytic reduction of carbon dioxide. The composition of the gas phase was analyzed using gas chromatography, and hydrogen, carbon oxide, and methane were identified. The influence of pH and heat treatment on the physicochemical properties of titania-based materials during photoreduction of carbon dioxide have been studied. It was found that the photocatalysts prepared in neutral environment were shown to result in a higher content of hydrogen, carbon monoxide, and methane in the gas phase compared to photocatalysts obtained under basic conditions. The highest amounts of hydrogen were detected in the processes using photocatalysts heated in the microwave reactor, and double-heated photocatalysts.

TiO2 Nanoparticles with Adjustable Phase Composition Prepared by an Inverse Microemulsion Method: Physicochemical Characterization and Photocatalytic Properties

Titania nanoparticles (NPs) find wide application in photocatalysis, photovoltaics, gas sensing, lithium batteries, etc. One of the most important synthetic challenges is maintaining control over the polymorph composition of the prepared nanomaterial. In the present work, TiO2 NPs corresponding to anatase, rutile, or an anatase/rutile/brookite mixture were obtained at 80 °C by an inverse microemulsion method in a ternary system of water/cetyltrimethylammonium bromide/1-hexanol in a weight ratio of 17:28:55. The only synthesis variables were the preparation of the aqueous component and the nature of the Ti precursor (Ti(IV) ethoxide, isopropoxide, butoxide, or chloride). The materials were characterized with X-ray diffraction, scanning/transmission electron microscopy, N2 adsorption-desorption isotherms, FTIR and Raman vibrational spectroscopies, and diffuse reflectance spectroscopy. The synthesis products differed significantly not only in phase composition, but also in crystallinity, textural properties, and adsorption properties towards water. All TiO2 NPs were active in the photocatalytic decomposition of rhodamine B, a model dye pollutant of wastewater streams. The mixed-phase anatase/rutile/brookite nanopowders obtained from alkoxy precursors showed the best photocatalytic performance, comparable to or better than the P25 reference. The exceptionally high photoactivity was attributed to the advantageous electronic effects known to accompany multiphase titania composition, namely high specific surface area and strong surface hydration. Among the single-phase materials, anatase samples showed better photoactivity than rutile ones, and this effect was associated, primarily, with the much higher specific surface area of anatase photocatalysts.

Sol-Gel Multilayered Niobium (Vanadium)-Doped TiO2 for CO Sensing and Photocatalytic Degradation of Methylene Blue

Multilayered TiO2 films doped either with Niobium or Vanadium (1.2 at. %) were deposited by the sol-gel dip coating method on c-Si and glass substrates. The films on glass substrates were tested for CO sensing and photocatalytic degradation of methylene blue. X-ray diffraction data analysis showed that all the TiO2:Nb(V) films were nanocrystalline in the anatase phase, with a uniform and compact microstructure and a homogeneous superficial structure of small grains with diameters in the range of 13-19 nm. For the electrical characterization, the TiO2:Nb(V) films were incorporated in Metal-Insulator-Semiconductor (MIS) structures. The specific resistivity is of the order of 104 Ωcm and its value decreases with increasing the electrical field, which testifies to the injection of electrons into these layers. From the analysis of the current-voltage curves taken at different temperature- and frequency-dependent capacitance-voltage and conductance-voltage characteristics, the density and parameters of deep levels in these TiO2 films are evaluated and the electron charge transport mechanism is established. It was shown that the current in these TiO2:Nb(V)-Si MIS structures is mainly carried out by inter-trap tunneling via deep levels energetically distributed in the TiO2 bandgap. Testing these sol-gel TiO2:Nb(V) layers for gas sensing and photocatalytic capabilities proved that they could serve such purposes. In particular, the results of the V-doped sol-gel TiO2 film confirm its CO detection capability, which is rarely reported in the literature. For the photodegradation of methylene blue, the Nb-doped TiO2 samples were superior, with nearly double the photocatalytic efficiency of undoped TiO2.

Charge transfer in TiO2-based photocatalysis: fundamental mechanisms to material strategies

Semiconductor-based photocatalysis has attracted significant interest due to its capacity to directly exploit solar energy and generate solar fuels, including water splitting, CO2 reduction, pollutant degradation, and bacterial inactivation. However, achieving the maximum efficiency in photocatalytic processes remains a challenge owing to the speedy recombination of electron-hole pairs and the limited use of light. Therefore, significant endeavours have been devoted to addressing these issues. Specifically, well-designed heterojunction photocatalysts have been demonstrated to exhibit enhanced photocatalytic activity through the physical distancing of electron-hole pairs generated during the photocatalytic process. In this review, we provide a systematic discussion ranging from fundamental mechanisms to material strategies, focusing on TiO2-based heterojunction photocatalysts. Current efforts are focused on developing heterojunction photocatalysts based on TiO2 for a variety of photocatalytic applications, and these projects are explained and assessed. Finally, we offer a concise summary of the main insights and challenges in the utilization of TiO2-based heterojunction photocatalysts for photocatalysis. We expect that this review will serve as a valuable resource to improve the efficiency of TiO2-based heterojunctions for energy generation and environmental remediation.

Recent advances in nanoflowers: compositional and structural diversification for potential applications

In recent years, nanoscience and nanotechnology have emerged as promising fields in materials science. Spectroscopic techniques like scanning tunneling microscopy and atomic force microscopy have revolutionized the characterization, manipulation, and size control of nanomaterials, enabling the creation of diverse materials such as fullerenes, graphene, nanotubes, nanofibers, nanorods, nanowires, nanoparticles, nanocones, and nanosheets. Among these nanomaterials, there has been considerable interest in flower-shaped hierarchical 3D nanostructures, known as nanoflowers. These structures offer advantages like a higher surface-to-volume ratio compared to spherical nanoparticles, cost-effectiveness, and environmentally friendly preparation methods. Researchers have explored various applications of 3D nanostructures with unique morphologies derived from different nanoflowers. The nanoflowers are classified as organic, inorganic and hybrid, and the hybrids are a combination thereof, and most research studies of the nanoflowers have been focused on biomedical applications. Intriguingly, among them, inorganic nanoflowers have been studied extensively in various areas, such as electro, photo, and chemical catalysis, sensors, supercapacitors, and batteries, owing to their high catalytic efficiency and optical characteristics, which arise from their composition, crystal structure, and local surface plasmon resonance (LSPR). Despite the significant interest in inorganic nanoflowers, comprehensive reviews on this topic have been scarce until now. This is the first review focusing on inorganic nanoflowers for applications in electro, photo, and chemical catalysts, sensors, supercapacitors, and batteries. Since the early 2000s, more than 350 papers have been published on this topic with many ongoing research projects. This review categorizes the reported inorganic nanoflowers into four groups based on their composition and structure: metal, metal oxide, alloy, and other nanoflowers, including silica, metal-metal oxide, core-shell, doped, coated, nitride, sulfide, phosphide, selenide, and telluride nanoflowers. The review thoroughly discusses the preparation methods, conditions for morphology and size control, mechanisms, characteristics, and potential applications of these nanoflowers, aiming to facilitate future research and promote highly effective and synergistic applications in various fields.

Combined analysis of transcriptomics and metabolomics on the cumulative effect of nano-titanium dioxide on mulberry seedlings

Introduction

Titanium dioxide nanoparticles (TiO₂ NPs) are among the most widely used inorganic nanomaterials in industry, medicine and food additives. There are increasing concerns regarding their potential risks to plants and the environment. Mulberry trees are widely grown in China due to their high survival rate and ability to aid ecological recovery.

Methods

Herein, the effects of TiO₂ NPs with different concentrations (100, 200, 400 and 800 mg/L) on the growth and physiology of the mulberry tree were systematically evaluated in aspects of physiology, transcriptomics and metabolomics.

Results

Results showed that TiO₂ NPs could be absorbed by the mulberry sapling root system and be transferred to the plant shoot. This results in the destruction of mulberry sapling root and leaf tissue. Furthermore, the number of chloroplasts and their pigment contents were reduced and the homeostasis of metal ions was disrupted. The toxic effects of TiO₂ NPs attenuated the mulberry sapling's stress resistance, the contents of malondialdehyde in 100 mg/L, 200 mg/L 400 mg/L and 800 mg/L treatment groups increased by 87.70%, 91.36%, 96.57% and 192.19% respectively compared with the control group. The transcriptomic data showed that TiO₂ NPs treatment mainly affected the expression of genes related to energy synthesis and transport, protein metabolism, and response to stress. Meanwhile, the results of metabolomics showed that 42 metabolites produced significant differences in mulberry, of which 26 differential metabolites were up-regulated in expression and 16 differential metabolites were down-regulated, mainly including metabolic pathways such as secondary metabolite biosynthesis, citric acid cycle, and tricarboxylic acid cycle, and was not conducive to the seed germination and or growth of the mulberry sapling.

Discussion

This study enriches the understanding of the effects of TiO₂ NPs on plants and provides a reference for the comprehensive scientific assessment of the potential risks of nanomaterials on plants.

Photocatalytic treatment of real liquid effluent from hydrothermal carbonization of agricultural waste using metal doped TiO2/UV system

This study investigated treatment of real liquid effluent generated from hydrothermal carbonization (HTC) of macadamia nut shell by employing transition metals Cu, Ni, and Fe doped titanium dioxide (TiO₂) photocatalysts. The anatase TiO₂ based photocatalysts were prepared via sol-gel method, and calcined at 400 °C. The modification with metal dopants was performed via ultrasonic assisted incipient wetness impregnation method. The prepared photocatalysts were characterized using XRD, UV-Vis DRS, SEM-EDX, and N₂ physisorption. The influence of metal dopants, types of TiO₂ support, and initial pH of the wastewater on the photocatalytic degradation performance of total organic carbon (TOC) and chemical oxygen demand (COD) in the wastewater were investigated. The results revealed that Fe doped TiO₂ exhibited the highest photocatalytic activity followed by Cu and Ni, respectively. Among all, Fe doped anatase TiO₂ were the most promising catalyst as it performed the highest removal of 75.1% for TOC and 94.1% for COD after 1 h irradiation at pH 4, achieving the lowest TOC and COD concentration of 405.62 mg/L and 91.26 mg/L, respectively. The findings suggested that photocatalytic degradation of HTC liquid effluent could be a potential treatment before releasing the wastewater to the environment.

Synthesis and application of titanium dioxide photocatalysis for energy, decontamination and viral disinfection: a review

Global pollution is calling for advanced methods to remove contaminants from water and wastewater, such as TiO₂-assisted photocatalysis.  The environmental applications of titanium dioxide have started after the initial TiO₂ application for water splitting by Fujishima and Honda in 1972. TiO₂ is now used for self-cleaning surfaces, air and water purification systems, microbial inactivation and selective organic conversion. The synthesis of titanium dioxide nanomaterials with high photocatalytic activity is actually a major challenge. Here we review titanium dioxide photocatalysis with focus on mechanims, synthesis, and applications. Synthetic methods include sol-gel, sonochemical, microwave, oxidation, deposition, hydro/solvothermal, and biological techniques. Applications comprise the production of energy, petroleum recovery, and the removal of microplastics, pharmaceuticals, metals, dyes, pesticides, and of viruses such as the severe acute respiratory syndrome coronavirus 2.

Recent Progress on Tailoring the Biomass-Derived Cellulose Hybrid Composite Photocatalysts

Biomass-derived cellulose hybrid composite materials are promising for application in the field of photocatalysis due to their excellent properties. The excellent properties between biomass-derived cellulose and photocatalyst materials was induced by biocompatibility and high hydrophilicity of the cellulose components. Biomass-derived cellulose exhibited huge amount of electron-rich hydroxyl group which could promote superior interaction with the photocatalyst. Hence, the original sources and types of cellulose, synthesizing methods, and fabrication cellulose composites together with applications are reviewed in this paper. Different types of biomasses such as biochar, activated carbon (AC), cellulose, chitosan, and chitin were discussed. Cellulose is categorized as plant cellulose, bacterial cellulose, algae cellulose, and tunicate cellulose. The extraction and purification steps of cellulose were explained in detail. Next, the common photocatalyst nanomaterials including titanium dioxide (TiO2), zinc oxide (ZnO), graphitic carbon nitride (g-C3N4), and graphene, were introduced based on their distinct structures, advantages, and limitations in water treatment applications. The synthesizing method of TiO2-based photocatalyst includes hydrothermal synthesis, sol-gel synthesis, and chemical vapor deposition synthesis. Different synthesizing methods contribute toward different TiO2 forms in terms of structural phases and surface morphology. The fabrication and performance of cellulose composite catalysts give readers a better understanding of the incorporation of cellulose in the development of sustainable and robust photocatalysts. The modifications including metal doping, non-metal doping, and metal-organic frameworks (MOFs) showed improvements on the degradation performance of cellulose composite catalysts. The information and evidence on the fabrication techniques of biomass-derived cellulose hybrid photocatalyst and its recent application in the field of water treatment were reviewed thoroughly in this review paper.

Application of visible light active photocatalysis for water contaminants: A review

Organic water pollutants are ubiquitous in the natural environment arising from domestic products as well as current and legacy industrial processes. Many of these organic water pollutants are recalcitrant and only partially degraded using conventional water and wastewater treatment processes. In recent decades, visible light active photocatalyst has gained attention as a non-conventional alternative for the removal of organic pollutants during water treatment, including industrial wastewater and drinking water treatment. This paper reviews the current state of research on the use of visible light active photocatalysts, their modified methods, efficacy, and pilot-scale applications for the degradation of organic pollutants in water supplies and waste streams. Initially, the general mechanism of the visible light active photocatalyst is evaluated, followed by an overview of the major synthesis techniques. Because few of these photocatalysts are commercialized, particular attention was given to summarizing the different types of visible light active photocatalysts developed to the pilot-scale stage for practical application and commercialization. The organic pollutant degradation ability of these visible light active photocatalysts was found to be considerable and in many cases comparable with existing and commercially available advanced oxidation processes. Finally, this review concludes with a summary of current achievements and challenges as well as possible directions for further research. PRACTITIONER POINTS: Visible light active photocatalysis is a promising advanced oxidation process (AOP) for the reduction of organic water pollutants. Various mechanisms of photocatalysis using visible light active materials are identified and discussed. Many recent photocatalysts are synthesized from renewable materials that are more sustainable for applications in the 21st century. Only a small number of pilot-scale applications exist and these are outlined in this review.

Colloidal nanomaterials for water quality improvement and monitoring

Water is the most important resource for all kind forms of live. It is a vital resource distributed unequally across different regions of the globe, with populations already living with water scarcity, a situation that is spreading due to the impact of climate change. The reversal of this tendency and the mitigation of its disastrous consequences is a global challenge posed to Humanity, with the scientific community assuming a major obligation for providing solutions based on scientific knowledge. This article reviews literature concerning the development of nanomaterials for water purification technologies, including collaborative scientific research carried out in our laboratory (nanoLAB@UA) framed by the general activities carried out at the CICECO-Aveiro Institute of Materials. Our research carried out in this specific context has been mainly focused on the synthesis and surface chemical modification of nanomaterials, typically of a colloidal nature, as well as on the evaluation of the relevant properties that arise from the envisaged applications of the materials. As such, the research reviewed here has been guided along three thematic lines: 1) magnetic nanosorbents for water treatment technologies, namely by using biocomposites and graphite-like nanoplatelets; 2) nanocomposites for photocatalysis (e.g., TiO2/Fe3O4 and POM supported graphene oxide photocatalysts; photoactive membranes) and 3) nanostructured substrates for contaminant detection using surface enhanced Raman scattering (SERS), namely polymers loaded with Ag/Au colloids and magneto-plasmonic nanostructures. This research is motivated by the firm believe that these nanomaterials have potential for contributing to the solution of environmental problems and, conversely, will not be part of the problem. Therefore, assessment of the impact of nanoengineered materials on eco-systems is important and research in this area has also been developed by collaborative projects involving experts in nanotoxicity. The above topics are reviewed here by presenting a brief conceptual framework together with illustrative case studies, in some cases with original research results, mainly focusing on the chemistry of the nanomaterials investigated for target applications. Finally, near-future developments in this research area are put in perspective, forecasting realistic solutions for the application of colloidal nanoparticles in water cleaning technologies.

Pulmonary dust foci as rat pneumoconiosis lesion induced by titanium dioxide nanoparticles in 13-week inhalation study

Background

Most toxicological studies on titanium dioxide (TiO₂) particles to date have concentrated on carcinogenicity and acute toxicity, with few studies focusing of pneumoconiosis, which is a variety of airspace and interstitial lung diseases caused by particle-laden macrophages. The present study examined rat pulmonary lesions associated with pneumoconiosis after inhalation exposure to TiO₂ nanoparticles (NPs).

Methods

Male and female F344 rats were exposed to 6.3, 12.5, 25, or 50 mg/m³ anatase type TiO₂ NPs for 6 h/day, 5 days/week for 13 weeks using a whole-body inhalation exposure system. After the last exposure the rats were euthanized and blood, bronchoalveolar lavage fluid, and all tissues including lungs and mediastinal lymph nodes were collected and subjected to biological and histopathological analyses.

Results

Numerous milky white spots were present in the lungs after exposure to 25 and 50 mg/m³ TiO₂ NPs. Histopathological analysis revealed that the spots were alveolar lesions, characterized predominantly by the agglomeration of particle-laden macrophages and the presence of reactive alveolar epithelial type 2 cell (AEC2) hyperplasia. We defined this characteristic lesion as pulmonary dust foci (PDF). The PDF is an inflammatory niche, with decreased vascular endothelial cells in the interstitium, and proliferating AEC2 transformed into alveolar epithelial progenitor cells. In the present study, the AEC2 in the PDF had acquired DNA damage. Based on PDF induction, the lowest observed adverse effect concentration for pulmonary disorders in male and female rats was 12.5 mg/m³ and 6.3 mg/m³, respectively. The no observed adverse effect concentration for male rats was 6.3 mg/m³. There was a sex difference in lung lesion development, with females showing more pronounced lesion parameters than males.

Conclusions

Inhalation exposure to TiO₂ NPs caused PDF, an air-space lesion which is an alveolar inflammatory niche containing particle-laden macrophages and proliferating AEC2. These PDFs histopathologically resemble some pneumoconiosis lesions (pulmonary siderosis and hard metal pneumoconiosis) in workers and lung disease in smokers, suggesting that PDFs caused by exposure to TiO₂ NPs in rats are an early pneumoconiosis lesion and may be a common alveolar reaction in mammals.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-022-00498-3.

Ag3PO4-Deposited TiO2@Ti3C2 Petals for Highly Efficient Photodecomposition of Various Organic Dyes under Solar Light

Two-dimensional Ti₃C₂ MXenes can be used to fabricate hierarchical TiO₂ nanostructures that are potential photocatalysts. In this study, the photodecomposition of organic dyes under solar light was investigated using flower-like TiO₂@Ti₃C₂, deposited using narrow bandgap Ag₃PO₄. The surface morphology, crystalline structure, surface states, and optical bandgap properties were determined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption analysis, and UV-Vis diffuse reflectance spectroscopy (UV-DRS). Overall, Ag₃PO₄-deposited TiO₂@Ti₃C₂, referred to as Ag₃PO₄/TiO₂@Ti₃C₂, demonstrated the best photocatalytic performance among the as-prepared samples, including TiO₂@Ti₃C₂, pristine Ag₃PO₄, and Ag₃PO₄/TiO₂ P25. Organic dyes, such as rhodamine B (RhB), methylene blue (MB), crystal violet (CV), and methylene orange (MO), were efficiently degraded by Ag₃PO₄/TiO₂@Ti₃C₂. The significant enhancement of photocatalysis by solar light irradiation was attributed to the efficient deposition of Ag₃PO₄ nanoparticles on flower-like TiO₂@Ti₃C₂ with the efficient separation of photogenerated e-/h+ pairs, high surface area, and extended visible-light absorption. Additionally, the small size of Ag₃PO₄ deposition (ca. 4–10 nm diameter) reduces the distance between the core and the surface of the composite, which inhibits the recombination of photogenerated charge carriers. Free radical trapping tests were performed, and a photocatalytic mechanism was proposed to explain the synergistic photocatalysis of Ag₃PO₄/TiO₂@Ti₃C₂ under solar light.

Enhanced ultraviolet-visible photocatalysis of RGO/equaixial geometry TiO2 composites on degradation of organic dyes in water

The reduced graphene oxide dopped equaixial geometry TiO₂ (rGO/egTiO₂) composite as photocatalyst was synthesized hydrothermally with various mass ratios of tetrabutyl titanate. The photocatalyst is considered to be rGO/equaixial geometry TiO₂ in terms of modifying the combined reduced graphene Oxide and TiO₂. The rGO plays a vital role in rGO/egTiO₂ composite as photocatalysts were analyzed in methylene blue (MB) and rhodamine B (RhB) photocatalytic degradation under UV and simulated solar light irradiation. This synthesized catalyst was characterized by various analytical techniques such as XPS, XRD, SEM, BET, and TEM. The rGO/egTiO₂ composite exhibits enhanced photocatalytic performance with degradation rates of 97.5 and 97% on RhB and MB for 60 min under UV radiation respectively, while the degradation rate of 94 and 92 % was observed on the same dyes for 6 h under the simulated sunlight radiation. The enhanced photocatalytic performance of the rGO/egTiO₂ composite under ultraviolet irradiation source was owing to a high separation efficiency of the photo-induced electron-hole pairs, while the photocatalytic performance under simulated sunlight radiation was due to the photosensitive and charge separator behavior of rGO. This offers us an excellent potential of significant photocatalytic activity for the removal of organic contaminants from wastewater.

Characterization and Properties of Titanium(IV) Oxide, Synthesized by Different Routes

The article considers the influence of precursor type and sol-gel synthesis conditions of TiO2 on its properties. The obtained TiO2 samples were characterized by X-ray diffraction methods, electron microscopy, as a result of which it was found that all the obtained TiO2 powders have the crystallite size in a nanorange of 2.5–17 nm. It was shown that sorption-photocatalytic properties of TiO2 significantly depend on a phase composition, surface acidity, specific surface area and porosity. It was found that the amorphous TiO2 has improved adsorption properties, while crystalline TiO2 is characterized by enhanced photocatalytic properties. Determined acidic nature of the TiO2 surface explains the better sorption and photocatalysis relative to the cationic dye.

Green carbonaceous material‒fibrous silica-titania composite photocatalysts for enhanced degradation of toxic 2-chlorophenol

In this work, fibrous silica-titania (FST) was successfully prepared by the microemulsion method prior to the addition of three types of carbonaceous materials: graphitic-carbon nitride, g-C3N4 (CN), graphene nanoplatelets (GN), and multi-wall carbon nanotubes, MWCNT (CNT), via a solid-state microwave irradiation technique. The catalysts were characterized using XRD, FESEM, TEM, FTIR, UV-Vis DRS, N2 adsorption-desorption, XPS and ESR, while their photoactivity was examined on the degradation of toxic 2-chlorophenol (2-CP). The result demonstrated that the initial reaction rate was in the following order: CNFST (5.1 × 10^-3 mM min^-1) > GNFST (2.5 × 10^-3 mM min^-1) > CNTFST (2.3 × 10^-3 mM min^-1). The best performance was due to the polymeric structure of g-C3N4 with a good dispersion of C and N on the surface FST. This dispersion contributed towards an appropriate quantity of defect sites, as a consequence of the greater interaction between g-C3N4 and the FST support, that led to narrowed of band gap energy (2.98 eV to 2.10 eV). The effect of scavenger and ESR studies confirmed that the photodegradation over CNFST occurred via a Z-scheme mechanism. It is noteworthy that the addition of green carbonaceous materials on the FST markedly enhanced the photodegradation of toxic 2-CP.

Synergic Effect of TiO2 Filler on the Mechanical Properties of Polymer Nanocomposites

Nanocomposites with polymer matrix offer excellent opportunities to explore new functionalities beyond those of conventional materials. TiO₂, as a reinforcement agent in polymeric nanocomposites, is a viable strategy that significantly enhanced their mechanical properties. The size of the filler plays an essential role in determining the mechanical properties of the nanocomposite. A defining feature of polymer nanocomposites is that the small size of the fillers leads to an increase in the interfacial area compared to traditional composites. The interfacial area generates a significant volume fraction of interfacial polymer, with properties different from the bulk polymer even at low loadings of the nanofiller. This review aims to provide specific guidelines on the correlations between the structures of TiO₂ nanocomposites with polymeric matrix and their mechanical properties. The correlations will be established and explained based on interfaces realized between the polymer matrix and inorganic filler. The paper focuses on the influence of the composition parameters (type of polymeric matrix, TiO₂ filler with surface modified/unmodified, additives) and technological parameters (processing methods, temperature, time, pressure) on the mechanical strength of TiO₂ nanocomposites with the polymeric matrix.

Synthesis and Characterization of Size-Controlled Titania Nanorods through Double Surfactants

A synthetic technique based on a two-step sol-gel hydrothermal method using cetyltrimethylammonium bromide (CTAB) and triblock copolymer PEO₁₀₆-PPO₇₀-PEO₁₀₆ (F127) as double surfactants with the assistance of three amines (ethylamine (EA), diethylamine (DEA), and triethylamine (TEA)) for fabrications of anatase titania nanorods is proposed. The formation and growth mechanisms of TiO₂ crystals are described. We discovered that crystal size reduces with an increase in the number of alkyl substituents on the nitrogen of amines because the steric hindrance of the bulky alkyl substituent around nitrogen suppresses the nucleation and crystal growth rate. The size of titania from 80 to 220 nm is modulated with concentrations of EA, DEA, and TEA. The amines are considered as catalysts for morphological evolution of TiO₂ crystals. The results indicate that the incorporation of double surfactants (F127-CTAB) has a dual role, acting as a chelating agent for titania against external forces and a capping agent inhibiting the three-dimensional growth of TiO₂ crystals.

A visible light active, carbon-nitrogen-sulfur co-doped TiO2/g-C3N4 Z-scheme heterojunction as an effective photocatalyst to remove dye pollutants

Heterojunction formation and heteroatom doping could be viewed as promising strategies for constructing composite photocatalysts with high visible light catalytic activity. In this work, we fabricated a carbon, nitrogen and sulfur co-doped TiO2/g-C3N4 (CNS-TiO2/g-C3N4) Z-scheme heterojunction photocatalyst composite via one-step hydrothermal and calcination methods. Compared with pure TiO2 and g-C3N4, the CNS-TiO2/g-C3N4 Z-scheme heterojunction photocatalyst possessed excellent degradation performance under visible light irradiation. Due to the formation of the Z-scheme heterostructure, the utilization rate of the photogenerated electrons-holes generated by the catalyst was increased, which enhanced the catalytic activity. Moreover, the heteroatom doping (C, N and S) could efficiently tailor the band gap of TiO2 and facilitate electron transition, contributing to enhancing the degradation ability under visible light. The CNS-TiO2/g-C3N4-2 exhibited a superior photocatalytic degradation efficiency (k = 0.069 min-1) for methyl orange dye (MO), which is higher than those of pure TiO2 (k = 0.001 min-1) and g-C3N4 (k = 0.012 min-1), showing excellent photocatalytic activity against organic pollutants.

Structure of the amorphous titania precursor phase of N-doped photocatalysts

Amorphous titania samples prepared by ammonia solution neutralization of titanyl sulphate have been characterized by chemical and thermal analyses, and with reciprocal-space and real-space fitting of wide-angle synchrotron X-ray scattering data. A model that fits both the chemical and structural data comprises small segments of lepidocrocite-type layer that are offset by corner-sharing as in the monoclinic titanic acids H2Ti n O2n+1·mH2O. The amorphous phase composition that best fits the combined chemical and scattering data is [(NH4)3H21Ti20O52]·14H2O, where the formula within the brackets is the cluster composition and the H2O outside the brackets is physically adsorbed. The NH4 + cations are an integral part of the clusters and are bonded to layer anions at the corners of the offset layers, as occurs in the alkali metal stepped-layer titanates. The stepped-layer model is shown to give a consistent mechanism for the reaction of aqueous ammonia with solid hydrated titanyl sulphate, in which the amorphous product retains the exact size and shape of the reacting titanyl sulphate crystals.

Synthesis and Characterization of Various Doped TiO2 Nanocrystals for Dye-Sensitized Solar Cells

Few works are reported on solvothermal preparation of nanoparticles by utilizing acetone alone without a surfactant. This synthesis approach is found to be prominent for producing the mesoporous structure, which is crucial in improving the dye loading of the photoanode. In addition, doping of metal ions is advantageous in order to bring down the excitation energy, which is promising for boosting the performance of the doped oxides. This research aims to synthesize various kinds of doped-TiO2 nanocrystals to serve as photoanode materials in dye-sensitized solar cells (DSSCs). An X-ray diffraction study evidenced the existence of the crystalline phase in pure and doped-TiO2 nanocrystals. Rietveld refinement study showed the mixed phases of crystalline TiO2 in the CrT, CuNT, and ST as compared to a single anatase phase in the samples PT, AgT, BT, CoT, FeT, SnT, ZT, VT, and ZMT. The absorption spectroscopy analysis demonstrated the reduced optical band gap from 3.10 to 2.79 eV. Scanning electron microscopy investigation endorsed the formation of TiO2 mesoporous microspheres with a mean diameter ranging from 200 to 331 nm along with a nanocrystal diameter ranging from 10 to 20 nm. Doping with the different dopants enhanced the conversion efficiency of DSSCs from 1.31 to ∼6%. Furthermore, we have performed the electrochemical impedance spectroscopy of DSSCs, and the findings are presented.

Oxygen vacancy-induced donor–acceptor-conjugated microporous poly(triphenylamine–benzothiadiazole)/TiO2 as a Z-scheme heterojunction photocatalyst towards a visible-light-driven degradation of bisphenol A

A Z-scheme TPABT/TiO₂ heterostructure induced by oxygen vacancies exhibited high photocatalytic performance for the degradation of bisphenol A under visible light irradiation.

Virtually Transparent TiO2/Polyelectrolyte Thin Multilayer Films as High-Efficiency Nanoporous Photocatalytic Coatings for Breaking Down Formic Acid and for Escherichia coli Removal

Virtually transparent photocatalytic multilayer films composed of TiO₂ nanoparticles and polyelectrolytes were built on model surfaces using layer-by-layer assembly and investigated as photocatalytic nanoporous coatings. Formic acid (HCOOH) and Escherichia coli were used as models for the degradation of gaseous pollutants and for studying antibacterial properties. Positively charged TiO₂ nanoparticles were coassembled with negatively charged poly(sodium 4-styrenesulfonate) (NaPSS) which leads to highly transparent nanoscale coatings in which the content of TiO₂ particles is controlled mainly by the number of deposition cycles and the enhanced translucency with respect to titania powders is likely due to the presence of the polyelectrolytes in the interstitial space between the particles. Build-up and structural properties of the films were determined by ellipsometry, quartz crystal microbalance (QCM-D, with dissipation monitoring), and UV-vis spectrophotometry in transmission and scanning electron microscopy. Complementary photophysical and activity tests of (PSS/TiO₂)_n multilayer films were performed in the gas-phase under UV-A light and revealed a peculiar dependence on the number of layer pairs (LPs), corresponding to a clear deviation from the usual observations in photocatalysis with increasing TiO₂ amounts. Most notably, a single LP film showed a strongly enhanced HCOOH mineralization and outperformed films with a higher number of LPs, with respect to the quantity of TiO₂ catalyst present in the films. It is believed that the high quantum yield (8.1%) of a coating consisting of a single TiO₂ layer which is 6-7 times higher than that of a 6-10 LP film could be due to the optimum accessibility of the TiO₂ crystallites toward both HCOOH and water molecules. In thicker films, while no detrimental light screening was observed with increasing the number of LPs, diffusion phenomena could cap the efficiency of the access of the pollutant and water to the catalytic surface. Unlike for HCOOH mineralization, three PSS/TiO₂ LPs were required for observing a maximum antibacterial activity of the nanocomposite coatings. This is likely due to the fact that micrometer-sized E. coli bacteria do not enter into the interstitial space between the TiO₂ particles and require a different surface morphology with respect to the number of active contact points for optimum degradation.

Optically Transparent Colloidal Dispersion of Titania Nanoparticles Storable for Longer than One Year Prepared by Sol/Gel Progressive Hydrolysis/Condensation

The molecular catalyst sensitized system (MCSS), where an excited molecular catalyst adsorbed on a semiconductor such as TiO₂ injects electrons to the conduction band of the semiconductor leading to hydrogen evolution/CO₂ reduction coupled with an oxidation of water on the molecular catalyst, has been one of the most probable candidates in the approach to artificial photosynthesis. For a full utilization of visible light, however, a serious light scattering of the aqueous suspension of TiO₂ in the visible region, which is generally experienced, should be avoided. Here, we report a preparation of optically transparent colloidal dispersion of TiO₂ by the sol/gel reaction of TiCl₄ through progressive hydrolysis/condensation under the basic condition without any calcination processes. The TiO₂ nanoparticles (TiO₂(NPs)) obtained were characterized as an amorphous particle (∼10-15 nm) having a microcrystal domain of anatase within several nm by XRD, Raman spectroscopies, XRF, XAFS, TG/DTA, and HRTEM, respectively. The energy-resolved distribution of carrier electron traps in TiO₂(NPs) as a fingerprint of TiO₂ was characterized through reversed double-beam photo-acoustic spectroscopy to have a close similarity to that of TiO₂(ST-01) as well as the observation of carrier traps by transient absorption spectroscopy. Though the powder TiO₂(NP) itself was not dispersed well in aqueous solution, the wet TiO₂(NPs) as prepared before being dried up provided a completely transparent aqueous dispersion under the acidic condition (1 M HCl). Addition of methanol enabled the colloidal dispersion (TiO₂(NPs, MeOH/H₂O, 0.1 M HCl)) to keep the optical transparency for longer than 1 year (550 days), which is the first example of TiO₂ dispersion storable for such a long period. TiO₂(NPs, MeOH/H₂O) exhibited a moderate photocatalytic reactivity of H₂ evolution with a quantum yield of ∼2.6% upon 365 nm light irradiation. An optically transparent thin film of TiO₂(NPs, MeOH/H₂O) was also successfully prepared on a glass plate to exhibit an enhanced hydrophilicity upon UV light irradiation.

A density gradient centrifugation method for rapid separation of nanoTiO2 and TiO2 aggregates from microalgal cells in complex mixtures with mercury

In natural environment, the microorganisms are exposed to complex mixtures of contaminants, including manufactured nanoparticles and their aggregates. Evaluation of the toxicant accumulation in biota exposed to such cocktails is a challenging task because the microorganisms need to be separated from nanomaterial aggregates often of a comparable size. We propose a method for separation of TiO₂ aggregates from green microalga Chlamydomonas reinhardtii and subsequent determination of cellular Hg concentration in algae exposed to mixture of Hg with nanoTiO₂, known also to adsorb Hg. The method is based on differences in specific weight of algae and TiO₂ aggregates, using medium speed centrifugation on a step gradient of sucrose. The efficiency of the separation method was tested with nanoTiO₂ of three different primary sizes at four concentrations: 2, 20, 100 and 200 mg L⁻¹. The method gives a possibility to separate nanoTiO₂ and their aggregates from the algae with a mean recovery of 83.3% of algal cells, thus allowing a reliable determination of Hg accumulation by microalgae when co-exposed to Hg and nanoTiO₂.

• A rapid and reliable method to separate algal cells and nanoparticle aggregates of comparable size.

• A method to measure the cellular amount of Hg in green alga co-exposed to Hg and nanoTiO₂.

Influence of Inorganic Bases on the Structure of Titanium Dioxide-Based Microsheets

Laboratory synthesis of microsheets of titanium dioxide from titanyl sulfate involves the use of ammonia solution, whereas another inorganic base is most likely to be employed at the industrial level, as ammonia is a toxic agent and therefore should be avoided according to European Union (EU) regulations. Selected nontoxic bases such as sodium, potassium, and lithium hydroxides have been tested as an alternative to ammonia solution to obtain amorphous and crystalline TiO₂-based microsheets. The final products obtained at each step of the procedure (samples lyophilized and annealed at 230 and 800 °C) were analyzed with electron and atomic force microscopy, X-ray powder diffraction, thermal analysis, and Fourier transform infrared (FTIR) and Raman spectroscopies to determine their morphology and phase composition. The differences in the morphology of the obtained products were described in detail as well as phase and structural composition throughout the process. It was found that, in the last step of the synthesis, microsheets annealed at 800 °C were built of small rods and oval or platy crystalline particles depending on the base used. The temperature of formation of anatase, rutile, and alkali-metal titanates in correlation with the ionic radius of the alkali metal present in the sample was discussed.

Degradation of Hexacyanoferrate (III) from Gold Mining Wastewaters via UV-A/LED Photocatalysis Using Modified TiO2 P25

The photocatalytic degradation of potassium hexacyanoferrate (III) was assessed in a bench-scale compound parabolic collectors (CPC) reactor assisted with a light-emitting diode (LED) UV-A source emitting at 365 nm, and using a modified TiO2 as a catalyst via the hydrothermal treatment of commercial Aeroxide P25. The experiments were performed under oxic and anoxic conditions in order to observe a possible reduction of the iron. The modified TiO2 showed a specific surface area 2.5 times greater than the original Aeroxide P25 and its isotherm and hysteresis indicated that the modified catalyst is mesoporous. The bandgap energy (Eg) of the modified TiO2 increased (3.34 eV) compared to the P25 TiO2 band gap (3.20 eV). A specific reaction rate constant of 0.1977 min−1 and an electrical oxidation efficiency of 7.77 kWh/m3 were obtained in the photocatalytic degradation. Although the TiO2 P25 yields a photocatalytic degradation 9.5% higher than that obtained one with the modified catalyst (hydrothermal), this catalyst showed better performance in terms of free cyanide release. This last aspect is a significant benefit since this can help to avoid the pollution of fresh water by reusing the treated wastewater for gold extraction. A photocatalytic degradation of the cyanocomplex of 93% was achieved when the process occurred under oxic conditions, which favored the removal. Summarizing, the hydrothermal method could be a promising treatment to obtain TiO2-based catalysts with larger specific areas.

Impact of the Physicochemical Features of TiO2 Nanoparticles on Their In Vitro Toxicity

The concern about titanium dioxide nanoparticles (TiO₂-NPs) toxicity and their possible harmful effects on human health has increased. Their biological impact is related to some key physicochemical properties, that is, particle size, charge, crystallinity, shape, and agglomeration state. However, the understanding of the influence of such features on TiO₂-NP toxicity remains quite limited. In this study, cytotoxicity, proinflammatory response, and oxidative stress caused by five types of TiO₂-NPs with different physicochemical properties were investigated on A549 cells used either as monoculture or in co-culture with macrophages differentiated from the human monocytic THP-1 cells. We tailored bulk and surface TiO₂ physicochemical properties and differentiated NPs for size/specific surface area, shape, agglomeration state, and surface functionalization/charge (aminopropyltriethoxysilane). An impact on the cytotoxicity and to a lesser extent on the proinflammatory responses depending on cell type was observed, namely, smaller, large-agglomerated TiO₂-NPs were shown to be less toxic than P25, whereas rod-shaped TiO₂-NPs were found to be more toxic. Besides, the positively charged particle was slightly more toxic than the negatively charged one. Contrarily, TiO₂-NPs, whatever their physicochemical properties, did not induce significant ROS production in both cell systems compared to nontreated control groups. These results may contribute to a better understanding of TiO₂-NPs toxicity in relation with their physicochemical features.

Electrodeposition of Photocatalytic Sn–Ni Matrix Composite Coatings Embedded with Doped TiO2 Particles

Direct current electrodeposited Sn–Ni/TiO2 nanostructured coatings were produced by embedding two different doped types of TiO2 particles within the alloy matrix, a commercially available doped carbon-based and doped N,S-TiO2 particles. The structural characteristics of the composite coatings have been correlated with the effect of loading, type of particles in the electrolytic bath, and the applied current density. Regardless of the type of doped particles TiO2, increasing values of applied current density resulted in a reduction of the co-deposition percentage of TiO2 particles and an increase of Tin content into the alloy matrix. The application of low current density values accompanied by a high load of particles in the bath led to the highest codeposition percentage (~3.25 wt.%) achieved in the case of embedding N,S-TiO2 particles. X-ray diffraction data demonstrated that in composite coatings the incorporation of the different types of TiO2 particles in the alloy metal matrix modified significantly the nano-crystalline structure in comparison with the pure coatings. The best photocatalytic behavior under visible irradiation was revealed for the composite coatings with the highest co-deposition percentage of doped N,S-TiO2 particles, that also exhibited enhanced wear resistance and slightly reduced microhardness compared to pure ones.

Modified Nano-TiO2 Based Composites for Environmental Photocatalytic Applications

TiO2 probably plays the most important role in photocatalysis due to its excellent chemical and physical properties. However, the band gap of TiO2 corresponds to the Ultraviolet (UV) region, which is inactive under visible irradiation. At present, TiO2 has become activated in the visible light region by metal and nonmetal doping and the fabrication of composites. Recently, nano-TiO2 has attracted much attention due to its characteristics of larger specific surface area and more exposed surface active sites. nano-TiO2 has been obtained in many morphologies such as ultrathin nanosheets, nanotubes, and hollow nanospheres. This work focuses on the application of nano-TiO2 in efficient environmental photocatalysis such as hydrogen production, dye degradation, CO2 degradation, and nitrogen fixation, and discusses the methods to improve the activity of nano-TiO2 in the future.

Photocatalytic treatment of tetracycline antibiotic wastewater by silver/TiO2 nanosheets/reduced graphene oxide and artificial neural network modeling

In this work, we focused on facile preparation of ternary nanocomposites containing TiO₂ nanosheets, reduced graphene oxide, and different quantities of silver for photocatalytic treatment of tetracycline (TC) antibiotic wastewater. Plasmonic silver nanoparticles were deposited on TiO₂ nanosheets/reduced graphene oxide nanocomposite via a photodeposition method (TGA(x) samples). The as-obtained samples were identified by variety of techniques such as XRD, UV-Vis DRS, FESEM/EDX, TEM, and Raman spectroscopy. The photocatalytic degradation experiments of TC (in concentration of 30 mg/L) were carried out by synthesized nanocomposites, and the degradation efficiency of TGA (0.076) (the optimal sample) was evaluated as 52.56% after 3 hr of irradiation under visible light. The obtained results showed that in TGA(x) samples, the reduced graphene oxide acts as a bridge for transferring photoinduced electrons from plasmonic silver nanoparticles to TiO₂ nanosheetes. A three-layered artificial neural network model with four input variables (irradiation time, catalyst dosage, initial concentration of TC, and silver nitrate content) and one output variable (% degradation) was optimized with 11 hidden neurons. The relative importance of the independent variables was calculated using Garson formula and the initial concentration of TC was found as the most influencing parameter (relative importance of 31%) on the treatment efficiency. PRACTITIONER POINTS: TiO₂ nanosheets synthesized on the reduced graphene oxide by hydrothermal method. Plasmonic silver nanoparticles deposited on TNs/rGO by photodeposition method The photocatalytic degradation of tetracycline (TC) was modeled by artificial neural network.

Synthesis and Surface Modification of TiO2-Based Photocatalysts for the Conversion of CO2

Among all greenhouse gases, CO2 is considered the most potent and the largest contributor to global warming. In this review, photocatalysis is presented as a promising technology to address the current global concern of industrial CO2 emissions. Photocatalysis utilizes a semiconductor material under renewable solar energy to reduce CO2 into an array of high-value fuels including methane, methanol, formaldehyde and formic acid. Herein, the kinetic and thermodynamic principles of CO2 photoreduction are thoroughly discussed and the CO2 reduction mechanism and pathways are described. Methods to enhance the adsorption of CO2 on the surface of semiconductors are also presented. Due to its efficient photoactivity, high stability, low cost, and safety, the semiconductor TiO2 is currently being widely investigated for its photocatalytic ability in reducing CO2 when suitably modified. The recent TiO2 synthesis and modification strategies that may be employed to enhance the efficiency of the CO2 photoreduction process are described. These modification techniques, including metal deposition, metal/non-metal doping, carbon-based material loading, semiconductor heterostructures, and dispersion on high surface area supports, aim to improve the light absorption, charge separation, and active surface of TiO2 in addition to increasing product yield and selectivity.

Nanofibrous TiO2 produced using alternating field electrospinning of titanium alkoxide precursors: crystallization and phase development

High-yield, free-surface alternating field electrospinning (AFES) was effectively used in the fabrication of titanium oxide nanofibrous materials from the precursors based on titanium alkoxide and a blend of polyvinylpyrrolidone and hydroxypropyl cellulose. The alkoxide/polymer mass ratio in the precursor solution has significant effects on the precursor fiber production rate as well as the structure of resulting TiO2 nanofibers after thermal processing of precursor fibers at temperatures from 500 to 1000 °C. Within the range of tested process parameters, the best fiber production rate of ∼5.2 g h-1 was achieved, in terms of the mass of crystallized TiO2 nanofibers, with the precursor that corresponded to 1.5 : 1 TiO2/polymer mass ratio. TiO2 nanofibers produced by calcination at 500 °C for 3 h had 100-500 nm diameters and were composed of anatase (20-25 nm crystallite size) with rutile content 0.1-6.0 mol%, depending on the precursor composition. A considerable amount of anatase phase (up to 80 mol%) can be retained after thermal processing of TiO2 nanofibers at 750 °C for 3 h. A nanofibrous material composed of smooth and long, predominantly monocrystalline rutile, fibrous segments was produced at 1000 °C from the precursor with 2.5 : 1 TiO2/polymer mass ratio.

Micro-Patterning of Magnetron Sputtered Titanium Dioxide Coatings and Their Efficiency for Photocatalytic Applications

Titanium dioxide thin films were deposited onto sola-lime glass substrates by reactive magnetron sputtering. Fine stainless steel mesh sheets with different aperture sizes were applied as masks over glass substrates to allow the deposition of the coatings with micro-patterned structures and, therefore, enhanced surface area. Non-patterned titania films were deposited for comparison purposes. The titanium dioxide films were post-deposition annealed at 873 K for crystallinity development and then extensively analysed by a number of analytical techniques, including scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDX), optical and stylus profilometry, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV-Vis spectroscopy. The photocatalytic activity of non-patterned and micro-patterned titania films was assessed under UV light irradiation by three different methods; namely methylene blue, stearic acid, and oleic acid degradation. The results revealed that the micro-patterned coatings significantly outperformed non-patterned titania in all types of photocatalytic tests, due to their higher values of surface area. Increasing the aperture of the stainless steel mesh resulted in lower photocatalytic activity and lower surface area values, compared to the coatings deposited through a smaller aperture mesh.

Numerical Assessment on Rotation Effect of the Stagnation Surface on Nanoparticle Deposition in Flame Synthesis

The effect of rotation of the stagnation surface on the nanoparticle deposition in the flame stabilizing on a rotating surface (FSRS) configuration was numerically assessed using CFD method. The deposition properties including particle trajectories, deposition time, temperature and surrounding O₂ concentration between the flame and stagnation surface were examined. The results revealed that although flame position is insensitive to the surface rotation, the temperature and velocity fields are remarkably affected, and the deposition properties become asymmetric along the burner centerline when the surface rotates at a fast speed (rotational speed ω ≥ 300 rpm). Particles moving on the windward side have similar deposition properties when the surface rotates slowly, but the off-center particles on the leeward side have remarkable longer deposition time, lower deposition temperature, and lower surrounding O₂ concentration, and they even never deposit on the surface when the surface rotates at a high speed. The rotation effect of the stagnation surface can be quantitatively described by an analogous Karlovitz number (Ka’), which is defined as the ratio of characteristic residence time of moving surface to the aerodynamics time induced by flame stretch. For high quality semiconducting metal oxide (SMO) films, it is suggested that Ka’ ≥ 1 should be kept.