Use of Fe/Al drinking water treatment residuals as amendments for enhancing the retention capacity of glyphosate in agricultural soils

Correlation of Phosphorus Adsorption with Chemical Properties of Aluminum-Based Drinking Water Treatment Residuals Collected from Various Parts of the United States

Over the past several decades, the value of drinking water treatment residuals (WTRs), a byproduct of the coagulation process during water purification, has been recognized in various environmental applications, including sustainable remediation of phosphorus (P)-enriched soils. Aluminum-based WTRs (Al-WTRs) are suitable adsorbent materials for P, which can be obtained and processed inexpensively. However, given their heterogeneous nature, it is essential to identify an easily analyzable chemical property that can predict the capability of Al-WTRs to bind P before soil amendment. To address this issue, thirteen Al-WTRs were collected from various geographical locations around the United States. The non-hazardous nature of the Al-WTRs was ascertained first. Then, their P adsorption capacities were determined, and the chemical properties likely to influence their adsorption capacities were examined. Statistical models were built to identify a single property to best predict the P adsorption capacity of the Al-WTRs. Results show that all investigated Al-WTRs are safe for environmental applications, and oxalate-extractable aluminum is a significant indicator of the P adsorption capacity of Al-WTRs (p-value = 0.0002, R2 = 0.7). This study is the first to report a simple chemical test that can be easily applied to predict the efficacy of Al-WTRs in binding P before their broadscale land application.

A comprehensive review on the coagulant recovery and reuse from drinking water treatment sludge

The main treatment unit in conventional systems for surface water is coagulation-flocculation (CF) process, which consumes huge quantities of coagulant, and produces large volume of sludge. The produced sludge is known as one of the components of water treatment sludge (WTS), which is considered as a global issue and hot topic require careful attention from the plant operators and sludge managers to be managed sustainably with applying an ecofriendly method. Among the suggested technologies, recovery and reuse of coagulants from WTS show the potential to decrease the waste disposal and chemicals usage for drinking water treatment significantly. So, this comprehensive review provides a useful insight into environmental and health problems of WTS, reports the sources, physicochemical properties of sludge, describes different sludge management methods by more focus on coagulant recovery (CR), which significantly point out the different aspects of WTS recovery and reuse, and eventually, economic evaluation of the CR process was also discussed. The results of this review confirm that coagulants can be recovered from WTS by different methods and also will be reused for multiple times in the removal of pollutants from water and wastewater. Moreover, the recovered coagulants can be used as building and construction materials, constructed wetlands substrate and other aims.

Trialling Water-Treatment Residuals in the Remediation of Former Mine Site Soils: Investigating Improvements Achieved for Plants, Earthworms, and Soil Solution

During clarification processes of raw water, a vast amount of by-product known as "drinking water-treatment residuals" (WTRs) are produced, being principally composed of hydroxides of the Al or Fe salts added during water treatment plus the impurities they remove. Aluminum-based (Al-WTR) and iron-based (Fe-WTR) materials were applied at 10% w/w to degraded, bare (unvegetated) soils from a restored coal mining site in central England (pH <3.9) to study their potential amelioration effects on earthworm mortality, biomass yield of seedling plants, and element concentrations in plant tissues, earthworm tissues, and soil solutions. A separate treatment with agricultural lime was also conducted for comparison to evaluate whether any observed improvements were attributable to the liming capacity of the WTRs. After completion of the trials, all samples were subjected to a wet-dry cycle, and the experiments were repeated (i.e., simulating longer-term effects in the field). Both types of WTRs significantly increased the biomass of plants, and in some treatments, survival of earthworms was also enhanced compared to nonamended soils. Excess plant tissue element concentrations and element concentrations in soil solutions were reduced in amended soils. The implications are that adding WTRs to mining-impacted soils is a potentially viable, sustainable, and low-cost remediation method that could be used globally to improve the soil condition. Environ Toxicol Chem 2020;39:1277-1291. © 2020 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC.

The bioaccessibility and fractionation of arsenic in anoxic soils as a function of stabilization using low-cost Fe/Al-based materials: A long-term experiment

Arsenic (As)-contaminated soils occur widely worldwide. In the present study, three low-cost Fe/Al-based materials, including red soil (RS), sponge iron filter (SIF) and Al-based water treatment sludge (WTS), were applied as amendments to remediate As-contaminated soils under anoxic conditions. After 180 d of incubation, the proportion of the sum of nonspecifically absorbed As (F1) and specifically absorbed As (F2) to the total As was reduced by 6%, 52% and 13% with 5% of RS, SIF and WTS addition, respectively, compared to the control soil (31%). The results showed that among the three amendments, SIF was the most effective at decreasing As bioaccessibility in soils. Compared with RS and WTS, SIF intensified the decrease of labile fractions and the increase of unlabile fractions, and the redistribution of the amorphous oxide-bound fraction (F3) and crystalline hydrous oxide-bound fraction (F4) occurred in the SIF-amended soil. Moreover, the As stabilization processes were divided into two stages in the control and RS-amended soil, while the processes were divided into three stages in both SIF- and WTS-treated soil. The As stabilization processes in all treated soils were characterized by the transformation of labile fractions into more immobilizable fractions, except for F4 transforming into F3 in the first stage in SIF-amended soil. Correspondingly, inner-surface complexation and occlusion within Fe/Al hydroxides were the common driving mechanisms for the transformation of As fractions. Therefore, taking into consideration the results of this study, SIF could be a more promising alternative than the other two materials to passivate As in anoxic soils.

Application of Red Mud in Wastewater Treatment

Red mud (RM) is an industrial waste produced in large amounts during alumina extraction from bauxite. Its disposal generates serious environmental pollution due to high alkalinity. Therefore, a strategy for the effective utilization of RM must be developed. For instance, RM may be transformed into useful products, such as adsorbents. Given its high concentrations of aluminum oxides, iron oxides, titanium oxides, silica oxides, and hydroxides, RM may be developed as a cheap adsorbent for the removal of various ions from aqueous solution and soils (e.g., metal and non-metal ions, phenolic compounds, and dyes) and waste gas purification (sulfide and carbide). This review summarizes the background, properties, and applications of RM as an adsorbent. Proper approaches of removing metal and non-metal elements from wastewater are also systematically reviewed and compared. Emphasis is placed on the surface modification of RM to obtain high adsorption. Finally, the scope for future research in this area for RM is discussed in depth.

DLLME-spectrophotometric determination of glyphosate residue in legumes

A new separation and pre-concentration method for spectrophotometric determination of glyphosate herbicide was developed. Glyphosate was converted into dithiocarbamic acid with CS2, followed by copper in the presence of ammonia to promote complex formation. This complex was collected in a CH2Cl2 organic drop and absorbance measured at 435nm. The analytical parameters, such as the amount of NH3, Cu(II) and CS2, type of extraction solutions, and the ratio of dispersive and organic liquids were optimized. The calibration curve was linear in the range 0.5-10mgl-1. The limits of detection and quantification were calculated from 3s to 10s criterions as 0.21mgl-1 and 0.70mgl-1, respectively. The developed method was applied to legume samples with the satisfactory recovery values of 98±4-102±3%.

Bacterial toxicity assessment of drinking water treatment residue (DWTR) and lake sediment amended with DWTR

Drinking water treatment residue (DWTR) seems to be very promising for controlling lake sediment pollution. Logically, acquisition of the potential toxicity of DWTR will be beneficial for its applications. In this study, the toxicity of DWTR and sediments amended with DWTR to Aliivibrio fischeri was evaluated based on the Microtox(®) solid and leachate phase assays, in combination with flow cytometry analyses and the kinetic luminescent bacteria test. The results showed that both solid particles and aqueous/organic extracts of DWTR exhibited no toxicity to the bacterial luminescence and growth. The solid particles of DWTR even promoted bacterial luminescence, possibly because DWTR particles could act as a microbial carrier and provide nutrients for bacteria growth. Bacterial toxicity (either luminescence or growth) was observed from the solid phase and aqueous/organic extracts of sediments with or without DWTR addition. Further analysis showed that the solid phase toxicity was determined to be related mainly to the fixation of bacteria to fine particles and/or organic matter, and all of the observed inhibition resulting from aqueous/organic extracts was identified as non-significant. Moreover, DWTR addition not only had no adverse effect on the aqueous/organic extract toxicity of the sediment but also reduced the solid phase toxicity of the sediment. Overall, in practical application, the solid particles, the water-soluble substances transferred to surface water or the organic substances in DWTR had no toxicity or any delayed effect on bacteria in lakes, and DWTR can therefore be considered as a non-hazardous material.

Investigation on the eco-toxicity of lake sediments with the addition of drinking water treatment residuals

Drinking water treatment residuals (WTRs) have a potential to realize eutrophication control objectives by reducing the internal phosphorus (P) load of lake sediments. Information regarding the ecological risk of dewatered WTR reuse in aquatic environments is generally lacking, however. In this study, we analyzed the eco-toxicity of leachates from sediments with or without dewatered WTRs toward algae Chlorella vulgaris via algal growth inhibition testing with algal cell density, chlorophyll content, malondialdehyde content, antioxidant enzyme superoxide dismutase activity, and subcellular structure indices. The results suggested that leachates from sediments unanimously inhibited algal growth, with or without the addition of different WTR doses (10% or 50% of the sediment in dry weight) at different pH values (8-9), as well as from sediments treated for different durations (10 or 180days). The inhibition was primarily the result of P deficiency in the leachates owing to WTR P adsorption, however, our results suggest that the dewatered WTRs were considered as a favorable potential material for internal P loading control in lake restoration projects, as it shows acceptably low risk toward aquatic plants.