Urban and rural transport of semivolatile organic compounds at regional scale: A multimedia model approach

The past 40 years' assessment of urban-rural differences in Benzo[a]pyrene contamination and human health risk in coastal China

China has implemented many environmental regulations to battle against polycyclic aromatic hydrocarbon (PAH) contamination since the 1990s. It remains unclear how the exposure levels of PAHs changed quantitatively since reform and opening up in 1978 in China, whether the human health risks decreased or not, and how about the discrepancy between urban and rural areas. Here, taking Benzo[a]pyrene (BaP) in the rapidly urbanized Bohai region of China as a case, we used the improved Berkeley-Trent-Urban-Rural model to simulate the multimedia concentrations of BaP from 1980 to 2020 based on BaP emissions at a regional scale. The total emission of BaP in 1990 was the highest, with a value of 240 t, while the urban emission peaked in 2010. The BaP emissions from rural areas were two to seven times higher than urban areas, and the differences became smaller over time. Despite this, the average modeled BaP concentrations in urban air and soil were two to tens fold higher than in rural areas, particularly in highly urbanized or industrialized cities. Mostly, the concentrations of BaP in rural areas peaked in 1990, while those in urban areas peaked in 1990 or 2010. Early urbanized Beijing and Tianjin were the hot-spot cities of BaP contamination before 2000, while after 2010, higher concentrations were found in late industrialized Shandong and Hebei. BaP posed potential cancer risks to local residents, and air inhalation accounted for more than 80 % of the total risk. Under the stronger implementation of environmental regulations since the 1990s, it showed great health benefits, particularly for the urban residents in Beijing and Tianjin. The biggest decline in cancer risk was found in the period 2010-2020, and the average decreasing rates were 61.4 % and 57.4 % for urban and rural areas, respectively.

Multimedia fate of sulfamethoxazole (SMX) in a water-scarce city by coupling fugacity model and HYDRUS-1D model

Increased concentrations of pharmaceutical and personal care products (PPCPs) have raised concerns about their impact on the ecological system and human health. To understand the environmental impact of PPCPs, we evaluated the fate of a typical PPCP of sulfamethoxazole (SMX) in a water-scarce city of Tianjin during 2013-2020 using a coupled model based on the dynamic fugacity model and HYDRUS-1D model. The results showed that the coupled model successfully simulated the reported SMX concentrations in the main fate media of water and soils, which accounted for 46.4 % and 53.0 % with equilibrium concentrations of 135-165 ng/L and 0.4-0.5 ng/g, respectively. The cross-media transfer flux results showed that advection was the prime input path for SMX in water, while degradation was the dominant output path. Wastewater irrigation and degradation were the main transfer processes of SMX in the soil. Moreover, human activities (i.e., emission loads) and climate (i.e., temperature and precipitation) change can significantly affect the concentrations and transfer rate of SMX in the media. These findings provide basic data and methods for the risk assessment of SMX in water-scarce regions.

Advancements in the dominion of fate and transport of pharmaceuticals and personal care products in the environment-a bibliometric study

The study on the fate and transport of Pharmaceuticals and Personal Care Products, PPCPs (FTP) in the environment, has received particular attention for over two decades. The PPCPs threaten ecology and human health even at low concentrations due to their synergistic effects and long-range transport. The research aims to provide an inclusive map of the scientific background of FTP research over the last 25 years, from 1996 to 2020, to identify the main characteristics, evolution, salient research themes, trends, and research hotspots in the field of interest. Bibliometric networks were synthesized and analyzed for 577 journal articles extracted from the Scopus database. Consequently, seven major themes of FTP research were identified as follows: (i) PPCPs category; (ii) hazardous effects; (iii) occurrence of PPCPs; (iv) PPCPs in organisms; (v) remediation; (vi) FTP-governing processes; and (vii) assessment in the environment. The themes gave an in-depth picture of the sources of PPCPs and their transport and fate processes in the environment, which originated from sewage treatment plants and transported further to sediment/soils/groundwater/oceans that act as the PPCPs' major sink. The article provided a rigorous analysis of the research landscape in the FTP study conducted during the specified years. The prominent research themes, content analysis, and research hotspots identified in the study may serve as the basis of real-time guidance to lead future research areas and a prior review for policymakers and practitioners.

Analysis of the multi-media environmental behavior of polycyclic aromatic hydrocarbons (PAHs) within Haizhou Bay using a fugacity model

In this study, we aimed to quantify the transport and fate of PAHs in different environmental phases (air, seawater, soil, sediment and fish), verify application of the Level III fugacity model in a bay simulation, and understand the transport and fate of PAHs in the bay environment on a macroscopic scale. The simulated average concentrations of ∑₁₆PAH in the air and soil (23.8 ng/m³ and 1080.91 ng/g, respectively), which is as a background reference data for the Haizhou Bay. In addition, the soil (307 t), fish (29.4 t), and sediment (9.72 t) phases were found to be important reservoirs in the Haizhou Bay. Emissions from road vehicles (658 t) accounted for the largest share of PAH emissions in the area, and atmospheric deposition contributed most to the input of PAHs to the polluted area in the region. Whereas the contribution of river runoff input was small, and degradation loss was the main output pathway.

Human health risk assessment for contaminated sites: A retrospective review

Soil contamination is a serious global hazard as contaminants can migrate to the human body through the soil, water, air, and food, threatening human health. Human Health Risk Assessment (HHRA) is a commonly used method for estimating the magnitude and probability of adverse health effects in humans that may be exposed to contaminants in contaminated environmental media in the present or future. Such estimations have improved for decades with various risk assessment frameworks and well-established models. However, the existing literature does not provide a comprehensive overview of the methods and models of HHRA that are needed to grasp the current status of HHRA and future research directions. Thus, this paper aims to systematically review the HHRA approaches and models, particularly those related to contaminated sites from peer-reviewed literature and guidelines. The approaches and models focus on methods used in hazard identification, toxicity databases in dose-response assessment, approaches and fate and transport models in exposure assessment, risk characterization, and uncertainty characterization. The features and applicability of the most commonly used HHRA tools are also described. The future research trend for HHRA for contaminated sites is also forecasted. The transition from animal experiments to new methods in risk identification, the integration and update and sharing of existing toxicity databases, the integration of human biomonitoring into the risk assessment process, and the integration of migration and transformation models and risk assessment are the way forward for risk assessment in the future. This review provides readers with an overall understanding of HHRA and a grasp of its developmental direction.

Research progress of the POP fugacity model: a bibliometrics-based analysis

With the emergence of environmental issues regarding persistent organic pollutants (POPs), fugacity models have been widely used in the concentration prediction and exposure assessment of POPs. Based on 778 relevant research articles published between 1979 and 2020 in the Web of Science Core Collection (WOSCC), the current research progress of the fugacity model on predicting the fate and transportation of POPs in the environment was analyzed by CiteSpace software. The results showed that the research subject has low interdisciplinarity, mainly involving environmental science and environmental engineering. The USA was the most paper-published country, followed by Canada and China. The publications of the Chinese Academy of Sciences, Lancaster University, and Environment Canada were leading. Collaboration between institutions was inactive and low intensity. Keyword co-occurrence analysis showed that polychlorinated biphenyls, organochlorine pesticides, and polycyclic aromatic hydrocarbons were the most concerning compounds, while air, water, soil, and sediment were the most concerning environmental media. Through co-citation cluster analysis, in addition to the in-depth exploration of traditional POPs, research on emerging POPs such as cyclic volatile methyl siloxane and dechlorane plus were new research frontiers. The distribution and transfer of POPs in the soil-air environment have attracted the most attention, and the regional grid model based on fugacity has been gradually improved and developed. The co-citation high-burst detection showed that the research hotspots gradually shifted from pollutant persistence and long-range transport potential to pollutant distribution rules among the different environmental media and the long-distance transmission simulation.

Modeling multimedia fate and health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in the coastal regions of the Bohai and Yellow Seas

Using an improved multimedia fate model, this study simulated the spatial distributions, partitioning behaviors, and mass exchanges of PAH₁₆ (16 species with priority by the USEPA) in multiple environmental compartments in the coastal regions of the Bohai and Yellow Seas, Northern China. The model predictions generally matched well with the measured results, as the deviations of most points were within one order of magnitude in the air, freshwater, and 3 soil compartments. The estimated concentrations of ΣPAH₁₆ in the northern part were higher than those in the southern part, which was consistent with the emissions of each part. Approximately 97.6% of the ΣPAH₁₆ mass was distributed in soils; therefore, soils served as the dominant sink of PAH₁₆. The estimated net flux of ΣPAH₁₆ from air to soil ranged from 0.4 to 10.7 mg/m²/year (an average of 3.2 mg/m²/year), and the estimated flux of deposition from air to soil fell in the range of 0.4-10.8 mg/m²/year (an average of 3.2 mg/m²/year), which served as the dominant process at the air-soil interface. The estimated net flux of ΣPAH₁₆ from air to freshwater ranged from -15.3 to 9.4 mg/m²/year (an average of -0.3 mg/m²/year), and the reversed volatilization flux from freshwater to air ranged from 0.01 to 21.1 mg/m²/year (an average of 3.7 mg/m^2/year). This situation indicated notable spatial variations and volatilization as the main process affecting the direction of net flux at the air-freshwater interface. Deterministic risk assessment and probabilistic risk assessment were conducted. The overall health risks of the studied regions were acceptable, while the excess lifetime cancer risk (ELCR) by air inhalation was greater than that by soil ingestion. CAPSULE: Multimedia fate model-predicted distributions and compositions of PAH₁₆ in different compartments, compartmental exchange fluxes and directions, and deterministic and probabilistic ELCR via different exposure pathways were assessed.

Spatially resolved environmental fate models: A review

Spatially resolved environmental models are important tools to introduce and highlight the spatial variability of the real world into modeling. Although various spatial models have been developed so far, yet the development and evaluation of these models remain a challenging task due to several difficulties related to model setup, computational cost, and obtaining high-resolution input data (e.g., monitoring and emission data). For example, atmospheric transport models can be used when high resolution predicted concentrations in atmospheric compartments are required, while spatial multimedia fate models may be preferred for regulatory risk assessment, life cycle impact assessment of chemicals, or when the partitioning of chemical substances in a multimedia environment is considered. The goal of this paper is to review and compare different spatially resolved environmental models, according to their spatial, temporal and chemical domains, with a closer insight into spatial multimedia fate models, to achieve a better understanding of their strengths and limitations. This review also points out several requirements for further improvement of existing models as well as for their integration.

Seasonal variability in multimedia transport and fate of benzo[a]pyrene (BaP) affected by climatic factors

The impact of meteorological factors on the transport behavior and distribution of volatile and semi-volatile organic pollutants has become an area of increasing concern. Here, we analyzed seasonal variation in climatic variables including wind, temperature, and precipitation to quantitatively assess the impact of these factors on the multimedia transport and fate of BaP in the continental region of China using a Berkeley-Trent (BETR) model. The advective rates of air exhibited an increasing trend of autumn (1.830 mol/h) < summer (1.975 mol/h) < winter (2.053 mol/h) < spring (2.405 mol/h) in association with increasing wind speed, indicating that lower atmospheric BaP concentrations are present in regions with high wind speeds and advective rates. The air-soil transport rates (0.08-45.55 mol/h) in winter were higher than in summer (0.07-32.41 mol/h), while low winter temperatures accelerate BaP accumulation in terrestrial ecosystems due to cold deposition. Cold deposition effects were more evident in northern regions than in southern regions. Further, increasing precipitation enhanced air-soil and soil-freshwater transport rates with the correlation coefficients of r = 0.445 and r = 0.598 respectively, while decreasing the air-vegetation transport rates (r = 0.475), thereby contributing to the accumulation of BaP in soils and freshwaters. In the light of the potential dispersion of BaP pollution at regional and global scales affected by these key climatic factors, this indirectly indicated the impact of future climate change on the BaP transport. Thus, flexible policy interventions should be enacted to slow future climate change.

Presence of polycyclic aromatic hydrocarbons among multi-media in a typical constructed wetland located in the coastal industrial zone, Tianjin, China: Occurrence characteristics, source apportionment and model simulation

In-depth understanding and accurately predicting the occurrence and fate of polycyclic aromatic hydrocarbons (PAHs) in constructed wetlands (CWs) is extremely crucial for optimizing the CWs construction and strengthening the risk control. However, few studies have focused on the PAHs among sediment-water-plant and model simulation in CWs. In this study, sediment, surface water and reed samples were gathered and analyzed from a typical CW. The concentrations of 16 PAHs (Σ₁₆PAHs) in sediments, surface water and reeds ranged from 620 to 4277 μg/kg, 114 to 443 ng/L and 74.5 to 362 μg/kg, respectively. The coefficients of variation (CV) were calculated as 0.796, 0.431 and 0.473 for the above three media respectively, indicating that the spatial distribution variation was medium intensity. The fugacity fraction (ff) suggested that sediments might act as the secondary release source of most PAHs. According to the diagnostic ratios and principal component analysis-multiple linear regression (PCA-MLR), PAHs in this CW mainly come from fossil fuels combustion and petroleum leakage. PAHs in sediments showed high ecological risk at water inlet and moderate risk at the other functional zones, while low risks for surface water at all functional zones. Although the human health risk assessment indicated relatively low cancer risk, the health risk still cannot be ignored with the continuous input and accumulation of exogenous PAHs. A mathematical model covering the hydraulics parameters and composition characteristics of the wetland was established, and its reliability was verified. The simulated results obtained by the established model were basically consistent with the measured values. In addition, the total remove efficiency of PAHs in surface water was 40.2%, which calculated by the simulated model. This work provides helpful insight into the comprehension of occurrence and fate of PAHs among multi-media in CWs.

Source emissions and climate change impacts on the multimedia transport and fate of persistent organic pollutants, Chaohu watershed, eastern China

Emission intensity and climate change control the transport flux and fate of persistent organic pollutants (POPs) in multiple environmental compartments. This study applied a multimedia model (BETR model) to explore alternations in the spatio-temporal trends of concentrations and transport flux of benzopyrene (BaP), phenanthrene (Phe), perfluorooctane sulfonates (PFOS) and polychlorinated biphenyls (PCBs) in the Chaohu watershed, located in the lower reaches of the Yangtze River, China in response to changes in source emissions and climate. The potential historic and future risks of these pollutants also were assessed. The results suggest that current trends in concentrations and transport were similar to that of their emissions between 2005 and 2018. During the next 100 years, temporal trends and spatial patterns were not predicted to change significantly, which is consistent with climate change. Based on sensitivity and correlation analyses, climate change had significant effects on multi-media concentrations and transport fluxes of BaP, Phe, PFOS and PCBs, and rainfall intensity was the predominant controlling factor. Risk quotients (RQs) of BaP and Phe-in soil increased from 0.42 to 0.95 and 0.06 to 0.35, respectively, from 2005 to 2090, indicating potential risks. The RQs of the other examined contaminants exhibited little potential risk in soil, water, or sediment. Based on spatial patterns, it was inferred that the ecosystem around Lake Chaohu is the most at risk. The study provides insights needed for local pollution control of POPs in the Chaohu watershed. In addition, the developed approach can be applied to other watersheds world-wide.

Inter-regional multimedia fate analysis of PAHs and potential risk assessment by integrating deep learning and climate change scenarios

Polycyclic aromatic hydrocarbons (PAHs) are hazardous compounds associated with respiratory disease and lung cancer. Increasing fossil fuel consumption, which causes climate change, has accelerated the emissions of PAHs. However, potential risks by PAHs have not been predicted for Korea, and appropriate PAH regulations under climate change have yet to be developed. This study assesses the potential risks posed by PAHs using climate change scenarios based on deep learning, and a multimedia fugacity model was employed to describe the future fate of PAHs. The multimedia fugacity model describes the dynamics of sixteen PAHs by reflecting inter-regional meteorological transportation. A deep neural network predicts future environmental and economic conditions, and the potential risks posed by PAHs, in the year 2050, using a prediction model and climate change scenarios. The assessment indicates that cancer risks would increase by more than 50%, exceeding the lower risk threshold in the southern and western regions. A mix of strategies for developing PAH regulatory policies highlighted the necessity of increasing PAHs monitoring stations and controlling fossil fuel usage based on the domestic and global conditions under climate change scenarios.

Urban-rural gradients of polycyclic aromatic hydrocarbons in soils at a regional scale: Quantification and prediction

The quantitative study of urban-rural gradients for persistent organic pollutants (POPs) is extremely important to understand the behavior of POPs as well as for ecological risk assessment and management. In this study, a practical urban-rural gradient model (URGM) was developed using atmospheric point source diffusion combined with a fugacity approach to test potential mathematical relationships among urban and rural soils. The mean value of polycyclic aromatic hydrocarbons (PAHs) for urban soils (0-2-km sites) was 570.80 ng/g, and was approximately 3.5 times higher than rural soils (30-50 km sites). Significant linear correlations were found between the amounts of PAHs in the surface soil and the city population and between the soil concentration and artificial surface area. Urban-rural PAH concentrations were simulated by the URGM and calibrated by city population and land-cover data, with average relative errors of 12.84%. The results showed that the URGM was suitable for simulating urban-rural PAH concentrations at a regional scale. The combustion of fossil fuels, biomass, and coal was the main source of soil PAHs in the study area, and the characteristic ratios of PAHs indicated a transition trend from pyrogenic to petrogenic sources along the urban-rural transects. This study thus provides a combined method for quantifying urban-rural gradients of PAHs and can thereby promote quantitative research on coupling among land cover, socio-economic data, and POP concentrations.

A review of multimedia transport and fate models for chemicals: Principles, features and applicability

The frequent use of chemicals has caused ecosystems and humans to be threatened due to their discharge into the environment. Multimedia environmental fate models could provide a comprehensive picture of transport behaviour and fate for organic chemicals in multiple environmental media. They have been designed and widely used for chemical risk assessment, chemical ranking and management support, and determination of chemical bioaccumulation. This study reviewed the principles, features and applicability of recent commonly used multimedia fate models from peer-reviewed literature. Fugacity-based and concentration-based models are now widely adopted for use in chemical fate evaluation, while they are more appropriate for volatile and semi-volatile chemicals. Or the fugacity-based models can use aquivalence equilibrium criterion to cations, anions and involatile chemicals. The MAMI and SESAMe models based on activity approach are applicable to neutral and ionizable molecules. However, interactions of ionic species with other water solutes are not taken into account in these models. Additionally, they could not directionally simulate how chemicals transported form one grid to another. Future attention should be focused on the reliability of transfer behaviour and fate of ionizable chemicals, as integrating the advantages of these two kinds of models into a reconstructed one may be a better choice. In a word, environmental multimedia models have been beneficial tools for chemical control and management, risk and effect estimation, and decision supporting.

A multimedia fugacity model to estimate the fate and transport of polycyclic aromatic hydrocarbons (PAHs) in a largely urbanized area, Shanghai, China

Increasing PAHs pollution is creating more complex urban pollution system. However, the availability of sufficient monitoring activities for PAHs in multicompartment and corresponding multi-interface migration processes is still not well understood. In this study, a Level III steady state fugacity model was validated to evaluate the detailed local variations, and mass fluxes of PAHs in various environmental compartments (i.e., air, soil, sediment, water, vegetation and organic film). This model was applied to a region of Shanghai in 2012 based on a large number of measured data and brings model predictions in 2020. The model results indicate that most of the simulated concentrations agreed with the observed values within one order of magnitude with a tendency of underestimation for vegetation. Direct emission is the main input pathway of PAHs entering the atmosphere, whereas advection is the main outward flow from Shanghai. Organic film was achieved the highest concentration of PAHs compared to other compartments up to 58.17 g/m³. The soil and sediment served as the greatest sinks of PAHs and have the longest retention time (2421.95-78642.09 h). Importantly, a decreasing trend of PAHs was observed in multimedia from 2012 to 2020 and the transfer flux from the air to vegetation to soil was the dominant pathways of BaP intermedia circulation processes. A sensitivity analysis showed that temperature was the most influential parameter, especially for Phe. A Monte Carlo simulation emphasized heavier PAHs were overpredicted in film and sediment, but lighter PAHs in air and water were generally underestimated.

Multimedia fate and transport simulation of perfluorooctanoic acid/ perfluorooctanoate in an urbanizing area

Strong global demand leads to significant production of fluoropolymers (FP) in China which potentially release large quantities of perfluorooctanoic acid/perfluorooctanoate (collectively called PFOA/PFO) to the environment. Modelling the fate and transport of PFOA/PFO provides an important input for human health risk assessment. Considering the effects of urbanization and existing forms of PFOA/PFO, this study used the modified multispecies Berkeley-Trent-Urban-Rural model to simulate the transfer behavior of PFOA/PFO in the Bohai Rim, China. Spatial distributions of PFOA/PFO emissions during the year 2012 for the study area were illustrated. About two thirds of the total amount of PFOA/PFO was estimated to be released into fresh water, and the total releases to rural areas were 160-fold higher than those to urban areas due to the location of fluorochemical industrial parks. The simulations predicted that hydrosphere was the fate of PFOA/PFO, followed by soil and vegetation, which was consistent with field data. The highest PFOA/PFO concentration was modeled in the Xiaoqing River basin with a value of 32.57 μg/L. The PFOA/PFO concentrations in urban soils were generally higher than those in rural soils except for grids 1, 3 and 46. In addition, it was estimated that the total flux of PFOA/PFO entering into the Bohai Sea was 24.57 ton/year, 100-fold higher than that of perfluorooctane sulfonates (PFOS).

Are unintentionally produced polychlorinated biphenyls the main source of polychlorinated biphenyl occurrence in soils?

The production of polychlorinated biphenyls (PCBs) has been banned globally for decades, but PCB concentrations in environmental media remain relatively high, especially in urban areas. Emissions estimates, studies of soil gradients between urban and rural areas, and quantitative identification of regional sources of PCBs in soils are necessary for understanding the environmental behavior of PCBs. In this study, regional PCB emissions were estimated at a resolution of 10 km × 10 km, and the spatial distribution of soil PCBs from urban to rural areas was studied along the Bohai and Yellow Sea regions. Compared with rural areas, mean PCB concentrations in urban soils (20.7 ng/g) were found to be higher, and concentrations decreased with distance from the city. Across both latitude and longitude directions, high PCB emissions in urban areas matched the distribution of total PCB concentrations in soils. The concentrations of the pollutants PCB28, PCB52, PCB101, PCB118, PCB138, PCB153, and PCB180 in soils originated from 5-year emissions, and accounted for 97%, 95%, 84%, 81%, 58%, 57%, and 27% of the total emissions, respectively. Unintentionally produced PCB (UP-PCB) emissions, which are mainly derived from cement (42%), pig iron (37%), crude steel (18%), and rolled steel (3%) industries, are the major contributors to PCBs in soils. Further identification of the sources and fates of PCBs requires a combination of field, laboratory, and modeling efforts.

Dynamic multimedia fate simulation of Perfluorooctane Sulfonate (PFOS) from 1981 to 2050 in the urbanizing Bohai Rim of China

Perfluorooctane sulfonate (PFOS) and related substances are widely used in various industrial and commercial applications in China that ultimately discharge sufficient quantities of PFOS to the environment. It remains unclear how emissions of PFOS ultimately affect its concentrations as well as its fate in the environment. In this study, an improved Berkeley-Trent (BETR) multimedia model is developed to predict the PFOS levels with spatial and temporal distributions on unsteady state mode from 1981 to 2050, by taking the Bohai Rim of China as a case. The results showed that the modeled concentrations agreed well with the measured data. According to the model, PFOS concentrations in fresh water peaked in some months after the peak emission (2008 or 2009), whereas in urban soil the concentrations increased to peak slightly later (around 2014). Among the selected regions, Beijing and Tianjin were simulated with higher PFOS levels in the past and present because of their higher urbanization and industrialization since the 1980s, while in the future, Shandong and Liaoning are expected to have higher concentrations of PFOS than those in Beijing. The water system including coastal water, fresh water and sediment was the biggest sink for PFOS for coastal regions. Among the chemical inputs, direct primary emissions played a more important role, whereas for chemical removal processes, inter-regional advection and background outflow were the predominant pathways. The results would be useful to control the PFOS releases in China and will help the management agencies to implement the "Stockholm Convention" effectively.

Molecular characterization of PAHs based on land use analysis and multivariate source apportionment in multiple phases of the Yangtze estuary, China

Spatial-temporal distributions, source identification, and possible effects of land use patterns on PAHs were studied in overlying water and surface sediments in Yangtze estuarine and nearby coastal areas. The concentrations of PAHs ranged from 172.6 ± 9.3 to 5603.7 ± 548.7 ng L^-1, 841.0 ± 36.6 to 31 190.5 ± 3711.5 ng g^-1 and 312.3 ± 7.6 to 9081.1 ± 862.3 ng g^-1, with mean contents of 1042.9 ng L^-1, 8922.9 ng g^-1 and 2400.2 ng g^-1 in water, suspended particulate matter (SPM) and sediments. PAH concentrations in three phases were higher in dry seasons (January and April) than in rainy seasons (July and October), and showed a distribution pattern as freshwater area > transition area > seawater area. Water and urban (especially for industrial) land uses contributed significantly to the PAH content in water and sediments. Urban and agricultural land uses were identified as important factors for regulating PAH concentrations in the SPM. TOC and BC were crucial controlling factors for the sorption and distribution of PAHs. The stable carbon isotope signatures of TOC and BC indicated the terrestrial origin of PAHs. Multivariate statistical and toxicity assessments revealed that LHK and SDK were contamination hotspots. Traffic emissions contributed 63% of PAH loadings in the three phases, yet biomass/coal combustion contributed over 85% of the toxicity caused by PAHs. Potential ecological and health risks of PAHs were low. We thus conclude that PAH pollution in the study area was primarily of terrestrial origin. BC and TOC were important predictors for PAH fate in the estuary. Urban and agricultural land use and river systems along the estuary were the major input pathways for the PAH loadings.

Potential effects of changes in climate and emissions on distribution and fate of perfluorooctane sulfonate in the Bohai Rim, China

Climate change and emissions rates of contaminants are expected to affect distribution and fate of Persistent Organic Pollutants (POPs) in the environment, however, studies on these combined factors are rare. In this study, Perfluorooctane Sulfonate (PFOS) is used as an example to assess how those two factors synthetically affect fate and disposition of POPs in the Bohai Rim of China by using the Berkeley-Trent-Urban-Rural (BETR-Urban-Rural) model. We set up three climate change scenarios and four emission scenarios to conduct the simulations. The results show that climate change could have significant effects on the transport and fate of PFOS mainly including advection, inter-compartmental transfer under the "worst case" emission scenario. For most grids, a remarkable decrease in concentrations of PFOS are predicted for fresh water and urban soil in the future, with precipitation and temperature being predominant factors, whilst for coastal water and rural soil, an increasing trend is predicted. Additionally, predicted sum of sources to the Bohai Sea increases greater than removals from the Bohai Sea in the future, adding evidence that concentrations of PFOS in coastal water will increase more in the future. Under scenarios of reduced emissions and climate change, concentrations of PFOS in each compartment decreased more rapidly over time. We suggest that assessment of future climate change impacts on fate of PFOS could take emission reductions into consideration.

Characterization and source apportionment of PAHs from a highly urbanized river sediments based on land use analysis

The city-scale land use/land cover change derived by urbanization on the fates of PAHs is of great concerns recently. This study evaluated spatiotemporal variations and sources of PAHs from a highly urbanized river sediments in the Huangpu River, Shanghai. Results indicated that the concentrations of PAHs in the sediments varied greatly across locations and seasons. The concentration of Σ₁₆PAHs in the dry season were 6 times higher than that in wet season. The mainstream and midstream of the Huangpu River were identified as the hotspots in both dry and wet seasons. However, 4-ring PAH compounds were dominated, contributing 42.41% ± 6.81% and 44.70 ± 7.73% in the dry and wet seasons, respectively. Multivariate statistical and land use analysis suggested that the main sources of PAHs derived from the cultivation, traffic and commercial activities. Buffer radii (<750 m) area with cultivated land, road/street and transportation and commercial and business facilities contributed significantly the PAHs in the sediment of the Huangpu River. Population density was also an important variable regulating the PAHs concentrations less than 750 m in the wet season. Risk assessment results revealed that the PAHs toxicity in the sediments was higher in dry season than in wet season. Overall, severe land use changes caused by rapid urbanization can contribute more amount of PAHs emission and complicated sources of PAHs, thus provide insights into the importance of land use types in indicating PAHs source.