TiO2/Schwertmannite nanocomposites as superior co-catalysts in heterogeneous photo-Fenton process

Hybrid combination of advanced oxidation process with membrane technology for wastewater treatment: gains and problems

Over the past few decades, significant efforts have been dedicated to advancing technologies for the removal of micropollutants from water. Achieving complete pure water with a single treatment process is challenging and nearly impossible. One promising approach among various alternatives is adopting hybrid technology, which is considered as a win-win technology. It utilizes the advantages of each technique, resulting in the enhancement of wastewater treatment. This pioneering idea is designed to significantly enhance water quality, addressing real-world implementation hurdles, and offer a promising solution to the worldwide issue of water scarcity. This review assesses the merits and drawbacks of the hybrid photocatalytic membrane technology employed in wastewater treatment. Notably, this hybrid process not only improves the membrane filtration capacity and permeates water quality but also enhances the antifouling performance of the membrane. However, it is crucial to acknowledge potential drawbacks, such as membrane structure degradation and photocatalytic activity loss in nanoparticles during the operation period. While improvements in wastewater treatment efficiency are evident, there remains ample room for further enhancements. The review summarizes the future directions and challenges of implementing such an integrated system.

Pd/MIL-100(Fe) as hydrogen activator for FeIII/FeII cycle: Fenton removal of sulfamethazine

Masses of iron sludge generated from engineering practice of classic Fenton reaction constraints its further promotion. Accelerating the FeIII/FeII cycle may be conducive to reducing the initial ferrous slat dosage and the final iron sludge. Based on the reduction of Pd/MIL-100(Fe)-activated hydrogen, an improved Fenton system named MHACF-MIL-100(Fe) was developed at ambient temperature and pressure. 97.8% of sulfamethazine, the target pollutant in this work, could be degraded in 5 min under the conditions of 20 mM H2O2, 25 μM ferrous chloride, initial pH 3.0, 2 g·L-1 composite catalyst Pd/MIL-100(Fe) and hydrogen gas 60 mL·min-1. Combining density functional theory (DFT) calculation and intermediate detection, the degradation of this antibiotic was inferred to start from the cleavage of N-S bond. The catalytic of Pd/MIL-100(Fe), demonstrated by the removal efficiency of SMT and the catalyst morphology, remained intact after six reaction cycles. The present study provides an insight into the promotion of Fenton reaction.

Mechanochemical synthesis of catalysts and reagents for water decontamination: Recent advances and perspective

This paper aims to provide insights on mechanochemistry as a green and versatile tool to synthesize advanced materials for water remediation. In particular, mechanochemical methodologies for preparation of reagents and catalysts for the removal of organic pollutants are reviewed and discussed, focusing on those materials that, directly or indirectly, induce redox reactions in the contaminants (i.e., photo-, persulfate-, ozone-, and Fenton-catalysts, as well as redox reagents). Methods reported in the literature include surface reactivity enhancement for single-component materials, as well as multi-component material design to obtain synergistic effects in catalytic efficiency and/or reactivity. It was also amply demonstrated that mechanochemical surface activation or the incorporation of catalytic/reactive components boost the generation of reactive species in water by accelerating charge transfer, increasing superficial active sites, and developing pollutant absorption. Finally, indications for potential future developments in this field are debated.

Degradation of ramipril by residues from the brewing industry: A new carbon-based photocatalyst compound

This study is a pioneer in the use of hydrochar as a support for photocatalytic oxide and its application and evaluation as a catalyst in degradation reactions of ramipril. Novel composites were easily prepared by the support TiO₂ or ZnO nanoparticles on the malt bagasse hydrochar. The preparation of the hydrochar requires low synthesis temperature (250 °C), generating the energy savings of the process. The production of the new composites was well supported by different analytical techniques XRD, FTIR, SSA, SEM, EDS, and reflectance diffuse. The effect of different proportions of TiO₂ or ZnO on the composites was investigated on the degradation efficiency of the pharmaceutical ramipril, without pH adjustment. Composites with a 5:1 hydrochar/TiO₂ or ZnO ratio (MH5T and MH5Z, respectively) showed degradations of 72 and 98% of ramipril at 120 min. This remarkable performance may be associated with the decrease in band gap energy and the electron-hole recombination rate. In addition, the composites were more efficient than metal oxides pristine, and this may be related to the fact that hydrochar have a high concentration of phenolic, hydroxyl, and carboxylic functional groups on their surface. Radical identification tests indicated that h⁺, O₂•^-, and •OH were the reactive species involved in the degradation. The proposed mechanism was studied via LC-MS/MS indicated that the ramipril molecule degrades into low m/z intermediates in the first 60 min of reaction using the MH5Z.

Relationship of the physicochemical properties of novel ZnO/biochar composites to their efficiencies in the degradation of sulfamethoxazole and methyl orange

Three different composites were produced, based on zinc oxide and biochar (ZnO/biochar), varying the type of biomass (Salvinia molesta: SM; exhausted husk of black wattle: EH; and sugarcane bagasse: SB), with pyrolysis under mild conditions at 350 and 450 °C. Evaluation was made of the capacities of the composites for photocatalytic degradation of sulfamethoxazole antibiotic (SMX) and methyl orange dye (MO). The properties of the prepared composites were influenced by the biomass source, with larger crystallite size (SB), lower band gap energy (SM), higher specific surface area (SB), and larger pore size (SM) resulting in higher photocatalytic efficiency. Good degradation results were obtained using these innovative photocatalysts prepared at low temperatures, when compared to ZnO/biochar materials reported in previous studies. The best degradation capacities were obtained for the composites produced at 450 °C from SB and SM, with 99.3 and 97% degradation of SMX after 45 min, and 90.8 and 88.3% degradation of MO after 120 min, respectively.