Current status of applying microwave-associated catalysis for the degradation of organics in aqueous phase - A review

Recent developments in synthesis of attapulgite composite materials for refractory organic wastewater treatment: a review

Attapulgite clay, due to its unique crystalline hydrated magnesium-aluminium silicate composition and layer-chain structure, possesses exceptional adsorption and catalytic properties, which enable it or its composites to be utilized as adsorbents and catalysts for wastewater treatment. But the drawbacks of attapulgite are also very obvious, such as relatively low specific surface area (compared to traditional adsorbents such as activated carbon and activated alumina), easy aggregation, and difficulty in dispersion. In order to fully utilize and improve the performance of attapulgite, researchers have conducted extensive research on its modification, but few specialized works have comprehensively evaluated the synthesis, applications and challenges for attapulgite-based composite materials in refractory organic wastewater treatments. This paper provides a comprehensive review of controllable preparation strategies, characterization methods and mechanisms of attapulgite-based composite materials, as well as the research progress of these materials in refractory organic wastewater treatment. Based on this review, constructive recommendations, such as deep mechanism analysis from molecular level multi-functional attapulgite-based material developments, and using biodegradable materials in attapulgite-based composites, were proposed.

Critical learning from industrial catalysis for nanocatalytic medicine

Systematical and critical learning from industrial catalysis will bring inspiration for emerging nanocatalytic medicine, but the relevant knowledge is quite limited so far. In this review, we briefly summarize representative catalytic reactions and corresponding catalysts in industry, and then distinguish the similarities and differences in catalytic reactions between industrial and medical applications in support of critical learning, deep understanding, and rational designing of appropriate catalysts and catalytic reactions for various medical applications. Finally, we summarize/outlook the present and potential translation from industrial catalysis to nanocatalytic medicine. This review is expected to display a clear picture of nanocatalytic medicine evolution.

Effective visible-light-driven photocatalytic degradation of fenitrothion by s-gC3N4/Ag-Au bimetallic nanocomposite

This paper reports on the optimization of fenitrothion photocatalytic degradation in visible light based on Plackett Burman (PB) design and central composite design (CCD) in response surface methodology (RSM). A herbicide routinely used with a negative impact on the environment is fenitrothion, which must be degraded to minimize the impact on the environment. For fenitrothion degradation, Ag-Au bimetallic nanoparticles on the semiconducting s-doped gC3N4 surface were synthesized using the galvanic exchange. The properties of s-gC3N4/Ag-Au bimetallic nanocomposite were confirmed by various methods. Significant factors responsible for fenitrothion photocatalytic degradation were determined using Plackett-Burman (PB) design and were catalyst dosage, initial fenitrothion concentration, H2O2 concentration, pH, and rotational speed. Central composite design (CCD) design was used for further optimization. The optimum conditions for the maximum degradation of fenitrothion (100%) constraints were found to be 100% an amount of H2O2 concentration 60 mM, pH 10, rotational speed 700 rpm. These results showed that s-gC3N4/Ag-Au bimetallic nanocomposite could act as a suitable photocatalyst under visible light in the degradation of fenitrothion. By removing fenitrothion from real water samples, as well as by maintaining its stability and reusability in five successive cycles, the practicality of this nanocomposite was demonstrated.

Strategies for enhancing performance of perovskite bismuth ferrite photocatalysts (BiFeO3): A comprehensive review

Organic pollutants pose a significant threat to water safety, and their degradation is of paramount importance. Photocatalytic technology has emerged as a promising approach for environmental remediation, and Bismuth ferrite (BiFeO3) has been shown to exhibit remarkable potential for photocatalytic degradation of water pollutants, with its excellent crystal structure properties and visible light photocatalytic activity. This review presents an overview of the crystal properties and photocatalytic mechanism of perovskite bismuth ferrite (BiFeO3), as well as a summary of various strategies for enhancing its efficiency in photocatalytic degradation of organic pollutants. These strategies include pure phase preparation, microscopic modulation, composite modification of BiFeO3, and the integration of Fenton-like reactions and external field-assisted methods to improve its photocatalytic performance. The review emphasizes the impact of each strategy on photocatalytic enhancement. By providing comprehensive strategies for improving the efficiency of BiFeO3 photocatalysis, this review inspires new insights for efficient degradation of organic pollutants using BiFeO3 photocatalysis and contributes to the development of photocatalysis in environmental remediation.

Recyclable magnetic Fe3O4@C for methylene blue removal under microwave-induced reaction system

The reclamation and removal of organic pollutants are difficult issues of world concern. In this study, a microwave-induced reaction system (MIRS) is applied to synthesize the multifunctional composite of Fe₃O₄@C, which is employed to adsorb, separate and catalytic oxide the typical organic dye of methylene blue (MB). SEM, TEM, VSM, XPS, pHpzc, and N₂ adsorption performances are carried out to characterize the Fe₃O₄@C. Results show that the Fe₃O₄@C mainly consists of activated Fe-O-C microspheres, which possess plentiful mesopore and macropore structures on surfaces. Batch adsorption experiments were carried out by varying key reaction conditions to optimize these. The maximum adsorption capacity of MB onto the Fe₃O₄@C was 305.0 mg g^-1 in 120 min, at pH 10, and at a temperature of 323 K. MIRS was also assisted to regenerate the spent Fe₃O₄@C which presented good regeneration efficiency by sustaining 16 regeneration cycles without any oxidizing agent. SEM images and FTIR spectrum verified that MB would translate into greater or smaller-sized carbon microspheres. What's more, the adsorption of MB onto both initial and the 16th regenerated Fe₃O₄@C obeyed the Langmuir isotherm model and followed the pseudo-second-order adsorption kinetics, indicating the adsorptive stability after regeneration. In this study, the Fe₃O₄@C combined with MIRS may be one innovative strategy for organic pollutants' complete removal in the future.

Enhanced photocatalytic organic pollutant degradation and H2 evolution reaction over carbon nitride nanosheets: N defects abundant materials

Post thermal treatment of bulk graphitic carbon nitride (g-C₃N₄) by ammonia gas acts as a significant structure regulation approach, while pure ammonia-assisted g-C₃N₄ synthesis from precursors like melamine is rarely investigated. Here we prove the synthesis of N-defects abundant carbon nitride nanosheets (ACN) through a one-pot thermal polymerization of melamine in pure ammonia gas, for photocatalytic organic pollutant removal in water and H₂ evolution applications. Compared to bulk g-C₃N₄ (BCN), ACN-550 (ACN prepared at 550 °C) exhibited thin-layered porous morphology with higher surface area and abundant N defects, resulting in wider distribution of active sites. Moreover, the abundant N defects in the heptazine heterocycle structure could change the electronic structure of g-C₃N₄, leading to more efficient transport of photogenerated charge carriers and enhanced photoreduction potential, which gives rise to notable improvement activities in photocatalytic reaction. With superoxide ion radical and photoinduced holes as the predominant reactive species, ACN-550 realized efficient photocatalytic bisphenol A (BPA) degradation, which is 1.6- and 4.7-fold high over commercial TiO₂ (P25) and BCN, respectively. ACN-550 exhibited excellent reusability and stability in five consecutive photocatalytic BPA degradation tests. In photo-reductive H₂ production system by ACN-550, 761.8 ± 4.3 μmol/h/g H₂ was produced, which was 11.6-fold as high as that by BCN.

A critical review on the technique and mechanism of microwave-based denitrification in flue gas

Microwave radiation has received extensive attention due to its significant thermal and non-thermal effects, and the development of MW-based denitrification in flue gas has become one of the most promising methods to avoid the defects of ammonia escape, high temperature and cost in traditional SCR. This review introduces the thermal and non-thermal effects of microwaves and divides MW-based denitrification methods into MW reduction and oxidation denitrification, systematically summarizes these denitrification methods, including MW discharge reduction, MW-induced catalytic reduction using active carbon, molecular sieves, metal oxides (transition metals, perovskites, etc.), MW-induced oxidation denitrification with and without additional oxidant, and discusses their removal pathway and mechanism. Finally, several research prospects and directions regarding the development of microwave-based denitrification methods are provided.

A review of microwave-assisted advanced oxidation processes for wastewater treatment

Microwave (MW) technology has gained increasing interest in wastewater treatment due to its unique properties, such as fast and uniform heating, hot spots effect, and non-thermal effect. MW enhances the production of active radicals (e.g., OH, SO₄^-), which exerts a stronger integrated treatment effect in combination with advanced oxidation processes. Over the years, microwave-assisted advanced oxidation processes (MW-AOPs) have developed rapidly to degrade pollutants as innovative treatment approaches. This paper provides a detailed classification and a comprehensive review of MW-AOPs. The latest applications of MW in different advanced oxidation systems (oxidation systems, catalytic oxidation systems, and photochemical, electrochemical and sonochemical systems) are reviewed. The reaction parameters and performance of MW-AOPs in wastewater treatment are discussed, and the enhancement of pollutant degradation by MW is highlighted. In addition, the operating costs of MW-AOPs are evaluated. Some recommendations on MW-AOPs are made for future research. This review provides meaningful information on the potential development and evolution of MW-AOPs.

Sustainable chemical processing of flowing wastewater through microwave energy

Iron oxide nanostructured catalysts have emerged as potential candidates for efficient energy conversion and electrochemical energy storage devices. However, synthesis and design of nanomaterial plays a key role in its performance and efficiency. Herein, we describe a one-pot solution combustion synthesis (SCS) of α-Fe₂O₃ with glycine as a fuel, and a subsequent reduction step to produce iron-containing catalysts (i.e., Fe₃O₄, Fe-Fe₃O₄, and Fe⁰). The synthesized iron-based nanoparticles were investigated for methyl orange (MO) degradation through Microwave (MW) energy under continuous flow conditions. Fe-Fe₃O₄ showed higher MO degradation efficiency than α-Fe₂O₃, Fe₃O₄ and Fe⁰ at low absorbed MW power (i.e. 5-80 W). The enhanced degradation efficiency is associated to the combination of higher availability of electron density and higher heating effect under MW energy. Investigation of dielectric properties showed relative dielectric loss of Fe₃O₄, Fe-Fe₃O₄, and Fe⁰ as 3847, 2010, and 1952, respectively. The calculated average local temperature by the comparative analysis of MW treatment with conventional thermal (CT) treatment showed a marked thermal effect of MW-initiated MO degradation. This work highlights the potential of microwave-driven water depollution under continuous-flow processing conditions and demonstrates the positive impact that earth-abundant Fe catalyst synthesized by green SCS method can have over the treatment of wastewater.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Effective treatment of hospital wastewater with high-concentration diclofenac and ibuprofen using a promising technology based on degradation reaction catalyzed by Fe0 under microwave irradiation

Real hospital wastewater was effectively treated by a promising technology based on degradation reaction catalyzed by Fe⁰ under microwave irradiation in this work. Fe⁰ powders were synthesized and characterized by different techniques, resulting in a single-phase sample with spherical particles. Optimum experimental conditions were determined by a central composite rotatable design combined with a response surface methodology, resulting in 96.8% of chemical oxygen demand reduction and 100% organic carbon removal, after applying MW power of 780 W and Fe⁰ dosage of 0.36 g L^-1 for 60 min. Amongst the several organic compounds identified in the wastewater sample, diclofenac and ibuprofen were present in higher concentrations; therefore, they were set as target pollutants. Both compounds were completely degraded in 35 min of reaction time. Their plausible degradation pathways were investigated and proposed. Overall, the method developed in this work effectively removed high concentrations of pharmaceuticals in hospital wastewater.

Highly efficient microwave-assisted Fenton degradation bisphenol A using iron oxide modified double perovskite intercalated montmorillonite composite nanomaterial as catalyst

In this work, perovskite intercalated montmorillonite (MMT) composite catalyst loaded by different mass fraction iron oxide, xFe₂O₃/LaCu_0.5Co_0.5O₃-MMT_0.2 (x was the mass fraction of Fe₂O₃ and x = 0.02, 0.04, 0.06), were prepared by impregnation method, and their catalytic activity were evaluated by microwave induced catalytic degradation of bisphenol A (BPA). Fe₂O₃ had a certain absorption effect on microwave, which could enhance the absorption property of composite material, improve the catalytic activity of catalyst. XRD, SEM, XPS and vector network analysis were used to analysis the structure, morphology, surface element composition and microwave absorption performance of the composite catalyst. The results indicated that the sample had uniform structure, a larger specific surface, a higher ratio of O_ads/O_lat and excellent microwave absorption performance. The effects of microwave power, pH value and H₂O₂ dosage on the catalytic degradation performance were studied, and 0.04Fe₂O₃/LCCOM_0.2 had the most obvious effect on the removal of BPA. The possible reaction mechanisms were discussed by characterization and experimental results of free radical capture. The surface active sites of the catalyst could be excited by microwave to generate oxidative free radicals, which could degrade BPA through electron hole transport. Response surface methodology (RSM) was used to optimize the operation parameters for the 0.04Fe₂O₃/LCCOM_0.2-BPA microwave degradation system.

Preparation of porous adsorbent via Pickering emulsion template for water treatment: A review

Porous materials as emerging potential adsorbents have received much more attention because they are capable of capturing various pollutants with fast adsorption rate, high adsorption capacity, good selectivity and excellent reusability. In order to prepare porous materials with decent porous structure, Pickering emulsion template method has been proved to be one of the most effective technologies to create pore structure. This paper reviewed comprehensively the latest research progress on the preparation of porous materials from various Pickering emulsions and their applications in the decontamination of pollutants (e.g., heavy metal ions, organic pollutants) and in the oil/water separation. It was expected that the summaries and discussions in this review will provide insights into the design and fabrication of new efficient porous adsorbents, and also give us a better understanding of the subject.