New insights on the enhanced non-hydroxyl radical contribution under copper promoted TiO2/GO for the photodegradation of tetracycline hydrochloride

A Comprehensive Review on Modification of Titanium Dioxide-Based Catalysts in Advanced Oxidation Processes for Water Treatment

It has become necessary to develop effective strategies to prevent and reduce water pollution as a result of the increase in dangerous pollutants in water reservoirs. Consequently, there is a need to design new catalyst materials to promote the efficiency of advanced oxidation processes (AOPs) in the field of wastewater treatment plant to ensure the mineralization of trace organic contaminants. A notable approach gaining attention involves the coupling of sulfate radicals-based AOPs to photocatalysis or electrocatalysis processes, aiming to achieve the complete removal of refractory contaminants into water and carbon dioxide. Titanium dioxide as metal oxide has received great attention for its catalytic application in water purification. TiO2 catalysts offer a multitude of advantages in AOPs. They are characterized by their high photocatalytic activity under both ultraviolet and visible light, making them environmentally friendly due to the absence of toxic byproducts during oxidation. Their versatility is remarkable, finding utility in various AOPs, from photocatalysis to photo-Fenton processes. TiO2's durability ensures long-lasting catalytic activity, which is crucial for continuous treatment processes, and their cost-effectiveness is particularly advantageous. Furthermore, their chemical stability allows it to withstand varying pH conditions. However, the large band gap energy and low electrical conductivity hinder the catalytic reaction effectiveness. This review aims to examine various approaches to enhance the catalytic performance of titanium dioxide, with the objective of enabling more efficient water purification methods.

Enhanced tetracycline degradation with TiO2/natural pyrite S-scheme photocatalyst

In this study, TiO2 nanoparticles were employed as a photocatalyst for the degradation of tetracycline (TC) under visible light irradiation. The TiO2 nanoparticles were decorated on natural pyrite (TiO2/NP) and characterized using XRD, FTIR, and SEM-EDX methods. This study evaluated the impacts of various operational parameters such as pH, catalyst dosage, initial TC concentration, and light intensity on TC removal. The findings revealed that under optimal conditions (pH 7, catalyst: 2 g/L, TC: 30 mg/L, and light intensity: 60 mW/cm2), 100% of TC and 84% of TOC were removed within 180 min. The kinetics of TC elimination followed a first-order model. The dominant oxidation species involved in the photocatalytic elimination of TC was found to be ·OH radicals in the TiO2/NP system. The reuse experiments showed the high capability of the catalyst after four consecutive cycles. This study confirmed that the TiO2/NP system has high performance in photocatalytic TC removal under optimized experimental conditions.

Photocatalytic degradation of four emerging antibiotic contaminants and toxicity assessment in wastewater: A comprehensive study

Excessive usage and unrestricted discharge of antibiotics in the environment lead to their accumulation in the ecosystem due to their highly stable and non-biodegradation nature. Photodegradation of four most consumed antibiotics such as amoxicillin, azithromycin, cefixime, and ciprofloxacin were studied using Cu2O-TiO2 nanotubes. Cytotoxicity evaluation of the native and transformed products was conducted on the RAW 264.7 cell lines. Photocatalyst loading (0.1-2.0 g/L), pH (5, 7 and 9), initial antibiotic load (50-1000 μg/mL) and cuprous oxide percentage (5, 10 and 20) were optimized for efficient photodegradation of antibiotics. Quenching experiments to evaluate the mechanism of photodegradation with hydroxyl and superoxide radicals were found the most reactive species of the selected antibiotics. Complete degradation of selected antibiotics was achieved in 90 min with 1.5 g/L of 10% Cu2O-TiO2 nanotubes with initial antibiotic concentration (100 μg/mL) at neutral pH of water matrix. The photocatalyst showed high chemical stability and reusability up to five consecutive cycles. Zeta potential studies confirms the high stability and activity of 10% C-TAC (Cuprous oxide doped Titanium dioxide nanotubes for Applied Catalysis) in the tested pH conditions. Photoluminescence and Electrochemical Impedance Spectroscopy data speculates that 10% C-TAC photocatalyst have efficient photoexcitation in the visible light for photodegradation of antibiotics samples. Inhibitory concentration (IC50) interpretation from the toxicity analysis of native antibiotics concluded that ciprofloxacin was the most toxic antibiotic among the selected antibiotics. Cytotoxicity percentage of transformed products showed r: -0.985, p: 0.01 (negative correlation) with the degradation percentage revealing the efficient degradation of selected antibiotics with no toxic by-products.

Preparation of floating BiOCl0.6I0.4/ZnO photocatalyst and its inactivation of Microcystis aeruginosa under visible light

Frequent occurrence of harmful algal blooms has already threatened aquatic life and human health. In the present study, floating BiOCl_0.6I_0.4/ZnO photocatalyst was synthesized in situ by water bath method, and and applied in inactivation of Microcystis aeruginosa under visible light. The composition, morphology, chemical states, optical properties of the photocatalyst were also characterized. The results showed that BiOCl_0.6I_0.4 exhibited laminated nanosheet structure with regular shape, and the light response range of the composite BZ/EP-3 (BiOCl_0.6I_0.4/ZnO/EP-3) was tuned from 582 to 638 nm. The results of photocatalytic experiments indicated that BZ/EP-3 composite had stronger photocatalytic activity than a single BiOCl_0.6I_0.4 and ZnO, and the removal rate of chlorophyll a was 89.28% after 6 hr of photocatalytic reaction. The photosynthetic system was destroyed and cell membrane of algae ruptured under photocatalysis, resulting in the decrease of phycobiliprotein components and the release of a large number of ions (K⁺, Ca²⁺ and Mg²⁺). Furthermore, active species trapping experiment determined that holes (h⁺) and superoxide radicals (·O₂^-) were the main active substance for the inactivation of algae, and the p-n mechanism of photocatalyst was proposed. Overall, BZ/EP-3 showed excellent algal removal ability under visible light, providing fundamental theories for practical algae pollution control.

Zinc hydroxystannate/zinc-tin oxide heterojunctions for the UVC-assisted photocatalytic degradation of methyl orange and tetracycline

Partial phase modification of zinc hydroxystannate (ZHS) is an effective technique for improving its light absorption capacity. In this study, a zinc hydroxystannate/zinc-tin oxide (ZHS/ZTO) heterostructure was synthesized via chemical co-precipitation followed by annealing. The as-prepared heterostructure revealed cubic crystal morphology along with high-intensity diffraction peaks in the XRD pattern. The XPS analysis of ZHS/ZTO heterostructures demonstrated the presence of key elements (Zn, Sn, and O) in their most stable ionic forms. The photocatalytic degradation efficiencies of the prepared samples were tested against methyl orange (MO) and tetracycline (TC) in an aqueous medium under UVC (254 nm) radiation. Under optimized conditions, maximum degradation efficiencies of 99% for MO and 97% for TC were observed in 120 and 180 min, respectively. Further, the predominant role of OH˙ radicals in the photocatalytic removal of MO and TC was evident through scavenging experiments. 2nd order kinetic model was outperformed in simulating the degradation mechanism of both targets over 1st and zero-order kinetic models. Finally, a photocatalytic degradation mechanism is proposed based on the energy values estimated for the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) using UPS analysis.

Effect of light on concomitant sequestration of Cu(II) and photodegradation of tetracycline by H-MOR/H-β/H-ZSM5 zeolites

It is important that a pollution remediation system be able to cater for a variety of pollutant species present in the water to be treated. The aim of this study was to utilise a series of commercial zeolites (H-MOR, H-β, and H-ZSM5) for the concomitant adsorption and photodegradation of Cu²⁺ and tetracycline (TC) molecules. The adsorbent cum photocatalyst was characterised by SEM and FTIR. FTIR confirmed the key functional groups (Si-O-Si and Al-O-Si) in the series of zeolites, and H-β zeolite was demonstrated to be the most effective adsorbent cum photocatalyst for both adsorption and photodegradation of Cu²⁺ and TC molecules. These results were further corroborated from the pseudo-first-order rate constant values. Among the investigated zeolites, H-ZSM5 displayed the least adsorption and photodegradation performance for Cu²⁺ and TC molecules. The photolysis reaction confirms the significant role of zeolites in the photodegradation test, as low performance was recorded in the absence of the zeolites.

Advanced catalytic ozonation for degradation of pharmaceutical pollutants-A review

Various chemical treatment techniques are involved in removing refractory organic compounds from water and wastewater using the oxidation reaction of hydroxyl radicals (^•OH). The use of catalysts in advanced catalytic ozonation is likely to improve the decomposition of molecular ozone to generate highly active free radicals that facilitate the rapid and efficient mineralization and degradation of numerous organics. For the degradation of toxic organic pollutants in wastewater, the advanced catalytic ozonation process has been widely applied in recent years. Low utilization efficiency of ozone and ineffective mineralization of organic contaminants by ozone can be remedied with advanced catalytic ozonation. Advanced catalytic ozonation has gained popularity because of these merits. However, homogeneous catalytic ozonation has the disadvantage of producing secondary contaminants from the addition of metallic ions. Heterogeneous catalytic ozonation can overcome this drawback by utilizing metals, metallic oxides, and carbon materials as a catalyst of efficacy and stability. This review discusses various aspects of catalytic ozonation in wastewater treatment of pharmaceutical pollutants, application of catalytic ozonation process in typical wastewater, and prospects in advancing the techniques in heterogeneous catalytic ozonation.

Enhanced dye-removal performance of Cu-TiO2-fly ash composite by optimized adsorption and photocatalytic activity under visible light irradiation

The performance of Cu/TiO₂/FA composite, a hybrid adsorbent-photocatalyst consisting of copper-doped titania particles supported on fly ash, was optimized, under visible light irradiation, for the removal of the model dye pollutant methyl orange (MO) by using a response surface methodology and Box-Behnken experimental design. Three independent variables were considered for the optimization study: catalyst/solvent dosage (0.5 - 2.0 g/L), irradiation time (30-120 min), and the initial concentration (5- 25 ppm) of the dye. A 99.91% rate of removal was achieved using 2 g/L dosage, 5 ppm initial concentration, and 100 min of irradiation time as the optimal operating conditions. The recorded trends support the hypothesis of a combined and synergic adsorption-photocatalytic degradation process which fully exploits the "capture and destroy" approach for pollutant removal.

A Review on Metal Ions Modified TiO2 for Photocatalytic Degradation of Organic Pollutants

TiO2 is a semiconductor material with high chemical stability and low toxicity. It is widely used in the fields of catalysis, sensing, hydrogen production, optics and optoelectronics. However, TiO2 photocatalyst is sensitive to ultraviolet (UV) light; this is why its photocatalytic activity and quantum efficiency are reduced. To enhance the photocatalytic efficiency in the visible light range as well as to increase the number of the active sites on the crystal surface or inhibit the recombination rate of photogenerated electron–hole pairs electrons, various metal ions were used to modify TiO2. This review paper comprehensively summarizes the latest progress on the modification of TiO2 photocatalyst by a variety of metal ions. Lastly, the future prospects of the modification of TiO2 as a photocatalyst are proposed.

One-step fabrication of CuO-doped TiO2 nanotubes enhanced the catalytic activity of Pt nanoparticles towards the methanol oxidation reaction in acid media

To meet the requirements for the potential applications of fuel cells, it is of vital importance to search for advanced electrocatalysts toward the methanol oxidation reaction that have both high electrocatalytic activity and great CO resistance.