Effects of phosphate on the transport of graphene oxide nanoparticles in saturated clean and iron oxide-coated sand columns

Transport of polystyrene microplastics in bare and iron oxide-coated quartz sand: Effects of ionic strength, humic acid, and co-existing graphene oxide

This research explored the effects of widely utilized nanomaterial graphene oxide (GO) and organic matter humic acid (HA) on the transport of microplastics under different ionic solution strengths in bare sand and iron oxide-coated sand. The results found transport of polystyrene microplastics (PS) did not respond to the presence of HA in sand that contains large amounts of iron oxide. Compared to bare quartz sand, ionic strength had little effect: <20 % of PS passed through Fe sand columns. There was a significant promotion of PS transport in the presence of GO, however, which can be attributed to the increased surface electronegativity of PS and steric hindrance. Moreover, GO combined with HA significantly promoted the transport of PS in the Fe sand, and transport further increased when the concentration of HA increased from 5 to 10 mg/L. Interestingly, the degree of this increase exactly corresponded to the change in the surface charge of the microplastics, demonstrating that electrostatic interaction dominated the PS transport. Further results indicated that co-existing pollutants had significant impacts on the transport of microplastics under various conditions by altering the surface characteristics of the plastic particles and the spatial steric hindrance within porous media. This research will offer insights into predicting the transport and fate of microplastics in complex environments.

Transport and retention of positively charged zinc oxide nanoparticles in saturated porous media: Effects of metal oxides and clays

The effects of metal oxides and clays on the transport of zinc oxide nanoparticles (ZnO-NPs) in saturated porous media were investigated under different ionic strength (IS) conditions. We studied the transport and retention behavior of ZnO-NPs for different types of porous media (untreated, acid treated, and acid-salt treated sand). The selected untreated sand was used as a representative sand, coated with both metal oxide and clay. The acid treated and acid-salt-treated sands were used and compared to investigate the effects of clays on the surface of the sand. In addition, the effects of clay particles in bulk solutions on the mobility and retention of ZnO-NPs were observed using bentonite as a representative clay particle. We found that the increased mobility of positively charged ZnO-NPs can be attributed to increasing charge heterogeneity of silica sand with metal oxides (mainly, iron oxide) and clays in untreated sand. No breakthrough of ZnO-NP was observed for acid-treated (presence of clays and absence of metal oxides) and acid-salt-treated sand (absence of both metal oxide and clays). Most of the injected ZnO-NPs were deposited on the surface of the sand near the column inlet. The transport of bentonite-facilitated ZnO-NPs was improved at the lowest IS (0.1 mM) (∼20%), whereas there was no difference in the mobility of ZnO-NPs at high IS solutions (1 mM and 10 mM). In particular, the breakthrough amount improved with increasing bentonite concentration. Classical Derjaguin-Landau-Verwey-Overbeek interactions help explain observed interactions between ZnO-NPs and sand as well as bentonite and sand.

Insight into Impact of Phosphate on the Cotransport and Corelease of Eu(III) with Bentonite Colloids in Saturated Quartz Columns

Understanding the fate and transport of radionuclides in porous media reduces the risk of contaminating soils and groundwater systems. While the cotransport of bentonite colloids (BC) with radionuclides in saturated media is well documented, the role of phosphate (P) in the colloid-driven transport of radionuclides in saturated porous media is still unaddressed; in particular, phosphate increases the mobilities of radionuclides in porous media, which should be subjected to an environmental risk assessment and model construction. In this work, the effects of phosphate on the transport and release of Eu(III) in different colloid systems (P-Eu(III), P-BC, P-BC-Eu(III)) was investigated with a fundamental colloid chemistry approach and a range of characterization techniques. The results showed that intrinsic europium colloids with size of 685 nm were formed by precipitation with phosphate, which affected the mobility of Eu(III) due to colloid stability and physical straining. Phosphate enhanced BC and BC-Eu(III) transport, and a high phosphate concentration promoted BC transport by eliminating physical straining and enhancing the electrostatic repulsions. The crystal structure of EuPO4 was not destroyed by the subsequent introduction of BC, which carried EuPO4 for further migration. However, when phosphate, bentonite and Eu(III) coexisted in a colloid suspension, the phosphate promoted Eu(III) transport by preferentially interacting with the BC to form ternary BC-P-Eu(III) pseudo-colloids rather than forming the intrinsic EuPO4 colloids. The synergetic role of P and BC on Eu(III) transport involved a relatively complex process and was not a simply additive effect. The findings in this work highlight the significance of phosphate in controlling the fate and transport of Ln(III)/Am(III) radionuclides in the presence of intrinsic colloids and pseudo-colloids in P-rich colloid-bearing environments.

Interplay of compound pollutants with microplastics transported in saturated porous media: Effect of co-existing graphene oxide and tetracycline

Co-existence of microplastics, nanomaterials, and antibiotics may lead to intensified multifaceted pollution, which may influence their fate in soils. This study investigated the co-transport behavior of polystyrene microplastics (PS) and compound pollutants of graphene oxide (GO) and tetracycline (TC). Packed column experiments for microplastic with or without combined pollutants were performed in KCl (10 and 30 mM) and CaCl2 solutions (0.3 and 1 mM). The results showed transport of PS was facilitated at low ionic strengths and inhibited at high ionic strengths by GO with or without TC under examined conditions. Carrier effect of GO as well as the aggregation of PS in the presence of co-exiting GO or GO-TC could be the contributor. Although the existence of TC relieved the ripening phenomenon of PS and GO deposition due to enhanced electronegativity of sand media, the effect of GO on the PS transport has not been significantly impacted, indicating the dominant role of GO during cotransport process. Furthermore, the transport of PS was increased by TC owing to competition for deposition sites on sand surfaces. In turn, the transport of TC was mainly affected by PS whether graphene was present or not. The increase in electrostatic repulsive force (transport-promoting) and addition adsorption sites (transport-inhibiting) may be responsible for the observations. Our findings could improve understandings of complex environmental behaviors of microplastics and provide insight into investigation on cotransport of emerging contaminants under various conditions relevant to the subsurface environment.

Co-transport of polystyrene microplastics and kaolinite colloids in goethite-coated quartz sand: Joint effects of heteropolymerization and surface charge modification

This study investigated the transport behavior of polystyrene microplastics (MPs) in saturated quartz sand and goethite-coated sand in the presence of coexisting kaolinite colloids. Column experiments were conducted under a wide range of solution chemistry conditions, including pH levels of 6.0, 7.0, and 9.0, as well as background Na⁺ concentrations of 5 mM and 25 mM. We found that: (1) The individual transport of MPs in porous media diminished both with increasing background ion strength and decreasing pH, and its transport ability was significantly dominated by the interactions between MPs and porous media rather than the interplay between MPs, which has been further corroborated by the aggregation stability experiments of MPs particles. (2) MPs had a much lower ability to move through goethite-coated sand columns than quartz sand columns. This is because goethite coating reduces the repulsion energy barriers between porous media and MPs. The increased specific surface area and surface complexity of sand columns after goethite coating should also account for this difference. (3) MPs transport would be subjected to the differentiated impact of co-transported kaolinite colloids in the two types of porous media. The promotion effect of kaolinite colloid on MPs' transport capacity is not significantly affected by background ionic strength changes when quartz sand is served as the porous medium; however, the promotion effect is highly correlated with the background ionic strength when goethite-coated sand is served as the porous medium. In comparison with low background ionic strength conditions, kaolinite colloids under high background ionic strength conditions significantly facilitated MPs transport. This is mainly because under high background ionic conditions, kaolinite colloids are more likely to be deposited on the surface of goethite-covered sand, competing with MPs for the limited deposition sites. The extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory is applicable to describe the transport behavior of MPs.

Adsorption modelling and fixed-bed column study on milk processing industry wastewater treatment using chitosan zinc-oxide nano-adsorbent-coated sand filter bed

This study aims to develop a chitosan-zinc oxide nano-adsorbent-coated sand (CZOCS) filter bed for getting rid of milk processing industry wastewater (MPIW) in a safe way. Chitosan zinc oxide nano-adsorbent (CZnO) of 88.35 ± 2.89 d.nm size was used to coat naturally available sand through a calcination process at 200 °C for a heating rate of 5 °C/min. The characteristics of the diffraction peaks and functional groups are attributed to the nature of CZnO loading on the sand surface. The increase in breakthrough and exhaustion times is caused by the biological oxygen demand (BOD) and chemical oxygen demand (COD) of influent having more time to interact with the adsorbent as bed height increases, resulting in higher reduction efficiencies. Lower bed heights (10 cm) which saturate faster than higher bed heights (40 cm) result in a shorter mass transfer time. Adsorption capacity at the 95% column exhaustion point increased from 611.04 to 1089.63 mg/g for BOD and from 4512.29 to 5600.81 mg/g for COD. Different kinds of kinetic models have been used to forecast breakthrough curves employing experimental data. Statistical and error function parameters were used to choose the best-fit model. Among the models investigated, the Thomas model was shown to be the best-fit with the highest R-square values of 0.9942 and 0.9939. The CZOCS has high reusability and could be used for up to six cycles of organic pollutant adsorption. Aside from that, novel CZOCS could be used to clean real MPIW, and making it one of the most promising adsorbents.

Insight into the effect of phosphate on ferrihydrite colloid-mediated transport of tetracycline in saturated porous media

Colloid-mediated contaminant mobility is absolutely critical for the environmental behavior of contaminants such as antibiotics in water resources. In this study, the influences of phosphate (a commonly inorganic ligand in the environment) on the ferrihydrite colloid-mediated transport of tetracycline (TC, a typical antibiotic) in porous media were investigated. In the absence of colloids, phosphate promoted TC mobility due to the competitive deposition of phosphate and TC on the sand surface as well as the electrostatic repulsion. Interestingly, ferrihydrite colloids could inhibit TC transport; however, the inhibitory effect of the colloids was weakened by the addition of phosphate. This phenomenon stemmed from colloid-associated TC mobility, the increased electrostatic repulsion induced by adsorbed phosphate, and deposition site competition effect. Another interesting finding was that the impacts of phosphate on the colloid-mediated mobility of TC were pH-dependent. That is, phosphate exhibited a weaker effect on the inhibitory role of ferrihydrite colloids in TC mobility at pH 5.0 than that at pH 7.0; specially, ferrihydrite colloids acted as possible carriers of TC and facilitated antibiotic transport at pH 9.0. The observations were ascribed to different influences of phosphate on the binding affinity of ferrihydrite toward TC and the mobility of free TC under different pH conditions. Therefore, the findings of this study provide useful information about the fate and co-transport of antibiotics and natural mineral colloids in the presence of inorganic ligands in the aquatic environment.

Biosurfactant-mediated mobility of graphene oxide nanoparticles in saturated porous media

There is currently a lack of scientific understanding regarding how bio-surfactants influence the mobility of graphene oxide (GO) through saturated porous media. In this study, the transport characteristics of GO through porous media with different heterogeneities (i.e., quartz sand and goethite-coated sand) after the addition of saponin (a representative bio-surfactant) were investigated. The results demonstrated that saponin (3-10 mg L^-1) promoted GO mobility in both types of porous media at pH 7.0. This trend was attributed to the competitive deposition between nanoparticles and bio-surfactant molecules for attachment sites, the enhanced electrostatic repulsion, the decreased strain, the presence of steric effects induced by the adsorbed saponin, and the increase in the hydrophilicity of nanoparticles. Intriguingly, saponin promoted GO mobility in goethite-coated sand (i.e., chemically heterogeneous porous media) to a greater extent than that in sand (i.e., relatively homogeneous porous media) when saponin concentrations increased, which stemmed from the differences in the extent of the deposition site competition for saponin on the two porous media and the electrostatic repulsion between GO and the porous media. Furthermore, a cation-bridging mechanism was also involved in the ability of saponin to increase GO mobility when the electrolyte solution was 0.1 mM Cu²⁺. Moreover, the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory and the colloid transport model were applicable to elucidate the mobility properties of GO with or without saponin in porous media. The findings from this work highlight the important status of bio-surfactants in the fate of colloidal carbon-based nanomaterials in subsurface systems.

Graphene oxide/MIL 101(Cr) (GO/MOF) nano-composite for adsorptive removal of 2,4-dichlorophenoxyacetic acid (2,4 D) from aqueous media: synthesis, characterization, kinetic and isotherm studies

Contamination of water resources with various pollutants and therefore lack of clean water resources are major problems that threaten many human societies. The need to develop efficient methods and materials to decontaminate water resource is an undeniable fact. Metal-organic frameworks (MOFs), as new class of highly crystalline porous solids, have attracted a great deal of attention in different research fields, especially in adsorptive removal and purification. In this study, MIL 101(Cr) MOF decorated with graphene oxide nano-layers (GO/MOF) was synthesized by a simple one-pot hydrothermal method. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and electron dispersion energy (EDS) were utilized to approve the growing of Cr-MOF on graphene oxide nano-layer. The synthesized nano-composite was used as a potential adsorbent for the removal of a pesticide, 2, 4-dichlorophenoxyacetic acid (2,4 D). The adsorption performance, kinetic and mechanism of 2,4 D adsorption onto GO/MOF were studied. The highest adsorption capacities of 476.9 mg g^-1 was obtained at room temperature, pH 6.0 using 0.6 gL^-1 of GO/MOF which was 34% higher than that of pristine Cr-MOF. The kinetics and isotherm data fitted well with pseudo-second kinetic and Langmuir isotherm model, respectively. The reusability and stability analyses showed that the synthesized GO/MOF nanocomposite kept 89% of sorption capacities for 2,4 D after four adsorption-desorption cycles. GO/MOF nano-composite was successfully applied to remove 2,4 D from agricultural waste. The results approved that the synthesized nano-composite could introduce as a stable and high performance adsorbent for adsorptive removal of selected pesticide.

Sensitivity of the Transport of Plastic Nanoparticles to Typical Phosphates Associated with Ionic Strength and Solution pH

The influence of phosphates on the transport of plastic particles in porous media is environmentally relevant due to their ubiquitous coexistence in the subsurface environment. This study investigated the transport of plastic nanoparticles (PNPs) via column experiments, paired with Derjaguin–Landau–Verwey–Overbeek calculations and numerical simulations. The trends of PNP transport vary with increasing concentrations of NaH₂PO₄ and Na₂HPO₄ due to the coupled effects of increased electrostatic repulsion, the competition for retention sites, and the compression of the double layer. Higher pH tends to increase PNP transport due to the enhanced deprotonation of surfaces. The release of retained PNPs under reduced IS and increased pH is limited because most of the PNPs were irreversibly captured in deep primary minima. The presence of physicochemical heterogeneities on solid surfaces can reduce PNP transport and increase the sensitivity of the transport to IS. Furthermore, variations in the hydrogen bonding when the two phosphates act as proton donors will result in different influences on PNP transport at the same IS. This study highlights the sensitivity of PNP transport to phosphates associated with the solution chemistries (e.g., IS and pH) and is helpful for better understanding the fate of PNPs and other colloidal contaminants in the subsurface environment.

Transport of tetracycline in saturated porous media: combined functions of inorganic ligands and solution pH

To date, there is still very little knowledge about the combined effects of typical inorganic ligands and solution pH values on mobility characteristics of tetracycline (TC) through saturated aquifer media. In this work, three typical inorganic ligands (i.e., phosphate, silicate, and iodate) were employed in the transport experiments. Generally, all the ligands promoted TC mobility over the pH range of 5.0-9.0 owing to the enhanced electrostatic repulsion between sand grains and TC anionic forms (i.e., TC^- and TC^2-) as well as the competitive deposition between ligands and antibiotic molecules for attachment sites. Furthermore, the transport-enhancement effects of ligands on TC intensively depended on ligand type and followed the sequence of phosphate > silicate > iodate. This phenomenon was ascribed to their different molecular sizes and binding abilities to sand grains. Interestingly, the differences in extents of enhanced effects of various inorganic ligands on TC transport varied with background solution pH due to pH-induced different extents of deposition site competition effects. Moreover, the two-site nonequilibrium model (which accounts for an equilibrium site and a kinetic site) as well as adsorption and kinetic studies were performed to help interpret the controlling mechanisms for the synergistic effects of inorganic ligands and solution pH on TC transport in saturated quartz sand. The findings of our study clearly demonstrate that inorganic ligands may be critical factors in assessing the fate and transport of antibiotics in groundwater systems.

Transport and deposition behaviors of microplastics in porous media: Co-impacts of N fertilizers and humic acid

Due to the interaction of fertilizers with microplastics (MPs) and porous media, fertilization process would influence MPs transport and distributions in soil. The co-impacts of N fertilizers (both inorganic and organic N fertilizers) and humic substance on MPs transport/retention behaviors in porous media were examined in 10 mM KCl solutions at pH 6. NH₄Cl and CO(NH₂)₂ were employed as inorganic and organic N fertilizers, respectively, while humic acid (HA) was used as model humic substance. We found that for all three sized MPs (0.2, 1 and 2 µm) without HA, both types of N fertilizers decreased their transport/increased their retention in porous media (both quartz sand and soil). N fertilizers adsorbed onto surfaces of MPs and sand/soil, lowering the electrostatic repulsion between MPs and porous media, thus contributed to the enhanced MPs deposition. MPs with N fertilizers in solutions more tightly attached onto porous media and thus were more difficult to be re-mobilized by low ionic strength solution elution. Via steric repulsion and increasing electrostatic repulsion between MPs and porous media due to adsorption onto their surfaces, HA could increase MPs transport with N fertilizers in solutions.

Insight into the inhibitory mechanism of inorganic ligands on the adsorption of tetracycline onto hematite

Inorganic ligands, ubiquitous in the natural environment, can interact with iron oxide minerals. To date, our knowledge regarding the effects of inorganic ligands on the adsorption properties of antibiotics onto iron oxides is still limited. In this work, the influences of different inorganic ligands (chosen iodate, silicate, and phosphate as the model ligands) on the adsorption of tetracycline (TC) onto hematite were examined. Adsorption isotherms indicated that inorganic ligands inhibited TC adsorption. The observations were attributed to the increase of electrostatic repulsion between anionic species (i.e., TC^-) and negatively charged hematite particles as well as the competition between TC^- species and inorganic ligand anions for the adsorption sites on hematite surfaces. Interestingly, the inhibitory effects of the three inorganic ligands were in the order of phosphate > silicate > iodate; the trend was stemmed from their differences in the binding affinities to hematite and the molecular size. When the background solutions contained divalent cations (e.g., Ca²⁺), surface precipitation of Ca-inorganic ligand compounds on hematite was another important mechanism for the inhibitory effects. Furthermore, adsorption of TC onto hematite with or without inorganic ligands was strongly affected by solution pH, which was due to the combination of the amphoteric behavior of TC and highly pH-dependent surface charges of the hematite mineral. Current results highlight the critical roles of ubiquitous inorganic ligands in revealing the fate of tetracycline antibiotics in natural systems.