Heavy metal removal from aqueous solutions by chitosan-based magnetic composite flocculants

Rapid visual dual-mode detection of Zr(IV) based on L-histidine functionalized gold nanoparticles

Heavy metal pollution has always been a great threat to human health and safety. Compared with other heavy metals, although zirconium ion (Zr(IV)) is equally harmful, due to the lack of research on Zr(IV) in the biological systems and environment, its detection does not seem to have received the attention it deserves. Herein, a rapid visual dual-mode detection (colorimetric and chrominance method) of Zr(IV) based on L-histidine functionalized gold nanoparticles (HIS-AuNPs) has been reported. AuNPs and HIS-AuNPs before and after adding Zr(IV) were characterized by UV-Vis, TEM, DLS, Zeta potential, EDS and FT-IR, etc. These results showed that L-histidine was successfully modified on the surface of AuNPs by forming a stable Au-N bond, and its modification had little effect on the dispersion degree of AuNPs. After the addition of Zr(IV), interaction of this metal ion with the imidazolyl group on L-histidine can obviously cause the aggregation of HIS-AuNPs within 12 min, and the dispersion state and particle size of HIS-AuNPs can be significantly changed. These two detection modes were established by means of absorbance and color change of solution, and being used in addition and recovery experiments of Zr(IV) in natural water. Under the optimal conditions, these two modes exhibited good linearity within 15-70 and 20-100 μmol L-1, and limit of detection of 2.62 and 6.25 μmol L-1. The proposed method was highly sensitive and selective, which provided a new convenient way to realize the detection of Zr(IV).

Recent advances in chitosan-based nanocomposites for adsorption and removal of heavy metal ions

Due to the high concentration of various toxic and dangerous pollutants, industrial effluents have imposed increasing threats. Among the various processes for wastewater treatment, adsorption is widely used due to its simplicity, good treatment efficiency, availability of a wide range of adsorbents, and cost-effectiveness. Chitosan (CS) has received great attention as a pollutant adsorbent due to its low cost and many -OH and -NH2 functional groups that can bind heavy metal ions. However, weaknesses such as sensitivity to pH, low thermal stability and low mechanical strength, limit the application of CS in wastewater treatment. The modification of these functional groups can improve its performance via cross-linking and grafting agents. The porosity and specific surface area of CS in powder form are not ideal, so physical modification of CS via integration with other materials (e.g., metal oxide, zeolite, clay, etc.) leads to the creation of composite materials with improved absorption performance. This review provides reports on the application of CS and its nanocomposites (NCs) for the removal of various heavy metal ions. Synthesis strategy, adsorption mechanism and influencing factors on sorbents for heavy metals are discussed in detail.

Coagulation performance and mechanism analysis of humic acid by using covalently bonded coagulants: effect of pH and matching mechanism of humic acid functional groups

Conventional inorganic coagulants (Al, Fe) and Al/Fe-based covalently bonded flocculants (CAFMs) had different hydrolysis species at different pHs, which subsequently led to differences in their binding sites and complexation ability with humic acid (HA). Studying the binding sites and interactions between CAFMs, AlCl3 (Al), and FeCl3 (Fe) hydrolysates and HA molecules is critical to understanding the coagulation mechanism. The results found that CAFM 0.6, Al, and AlCl3 combined FeCl3 (Al/Fe) removed more than 90% of HA at pH 6, and CAFMs showed higher HA removal rate than that of Al, Fe, and Al/Fe under the same reaction conditions. The flocs of CAFMs contained abundant -NH2/OH as well as the large particle size, compact structure, and excellent settling performance. The hydrolyzed species of Al and Fe were predominantly Alb and Feb at pH 6, but the hydrolyzed species of CAFMs were primarily (Al + Fe)c. Moreover, the hydrolyzed species of Al and Al/Fe were found to complex with HA functional groups such as -COOH, C = O, C-H/C-C, C = C, and C-OH to form ligand bonds, while the hydrolyzed species (Al + Fe)c of CAFMs could deeply interact with HA functional groups including C-O, -COOH, C = O, C-H/C-C, C = C, and C-OH by the adsorption and sweeping.

Nickel-hydroxide-encapsulated polyacrylamide as a novel adsorptive composite for the capture of methylene blue from wastewater

The wastewater released from different industries is a major environmental issue that has grabbed significant attention lately. Thus, the implementation of suitable routes for the treatment of such water is strongly recommended to reach the level of possible reuse for either industrial or agricultural purposes. In line with such a concept, this research work introduces a new composite structure made via the coating of polyacrylamide by loading nickel hydroxide nanoparticles for use as an absorbent for the purification of wastewater from dye contaminants. High internal phase emulation (HIPE) polymerization was utilized to first prepare particles of polyacrylamide followed by their coating with particles of nickel hydroxide to ultimately obtain the designated adsorbent. The structural features and chemical composition of the synthesized composite were confirmed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and energetic dispersive X-ray (EDX) spectroscopy. Additionally, scanning electron microscopy (SEM) and N2 adsorption-desorption surface area analysis were employed to detect the textural characteristics of the composite. Subsequently, the efficiency of this structure, as an adsorbent for the disposal of methylene blue dye species from a wastewater sample, was studied. During the water purification process, several operating parameters, namely, retention time, solution pH, initial concentration, and absorbent dose, were investigated. The presented Ni-polyacrylamide composite achieved the promising removal of methylene blue dye. An increased adsorption capacity of 14.3 mg g-1 toward methylene blue was achieved by the composite, thanks to the presence of both organic and inorganic functional groups within its structure. Kinetic and isotherm studies for the adsorption of methylene blue species were found to fit pseudo-second-order and Langmuir models. Additionally, thermodynamic measurements indicated that the adsorption process of methylene blue is feasible, spontaneous, involves physisorption, and is endothermic.

Preparation and Application of Amino-Terminated Hyperbranched Magnetic Composites in High-Turbidity Water Treatment

In order to separate the colloidal in high-turbidity water, a kind of magnetic composite (Fe3O4/HBPN) was prepared via the functional assembly of Fe3O4 and an amino-terminal hyperbranched polymer (HBPN). The physical and chemical characteristics of Fe3O4@HBPN were investigated by different means. The Fourier Transform infrared spectroscopy (FTIR) spectra showed that the characteristic absorption peaks positioned at 1110 cm-1, 1468 cm-1, 1570 cm-1 and 1641 cm-1 were ascribed to C-N, H-N-C, N-H and C=O bonds, respectively. The shape and size of Fe3O4/HBPN showed a different and uneven distribution; the particles clumped together and were coated with an oil-like film. Energy-dispersive spectroscopy (EDS) displayed that the main elements of Fe3O4/HBPN were C, N, O, and Fe. The superparamagnetic properties and good magnetic response were revealed by vibrating sample magnetometer (VSM) analysis. The characteristic diffraction peaks of Fe3O4/HBPN were observed at 2θ = 30.01 (220), 35.70 (311), 43.01 (400), 56.82 (511), and 62.32 (440), which indicated that the intrinsic phase of magnetite remained. The zeta potential measurement indicated that the surface charge of Fe3O4/HBPN was positive in the pH range 4-10. The mass loss of Fe3O4/HBPN in thermogravimetric analysis (TGA) proved thermal decomposition. The -C-NH2 or -C-NH perssad of HBPN were linked and loaded with Fe3O4 particles by the N-O bonds. When the Fe3O4/HBPN dosage was 2.5 mg/L, pH = 4-5, the kaolin concentration of 1.0 g/L and the magnetic field of 3800 G were the preferred reaction conditions. In addition, a removal efficiency of at least 86% was reached for the actual water treatment. Fe3O4/HBPN was recycled after the first application and reused five times. The recycling efficiency and removal efficiency both showed no significant difference five times (p > 0.05), and the values were between 84.8% and 86.9%.

Preparation and Application of Magnetic Composites Using Controllable Assembly for Use in Water Treatment: A Review

The use of magnetic composites in wastewater treatment has become widespread due to their high flocculating characteristics and ferromagnetism. This review provides an analysis and summary of the preparation and application of magnetic composites through controllable assembly for use in wastewater treatment. The applications of magnetic composites include the treatment of dye wastewater, heavy metal wastewater, microalgae suspensions, and oily wastewater. Additionally, the recycling and regeneration of magnetic composites have been investigated. In the future, further research could be focused on improving the assembly and regeneration stability of magnetic composites, such as utilizing polymers with a multibranched structure. Additionally, it would be beneficial to explore the recycling and regeneration properties of these composites.

Adsorptive performance and mechanism exploration of l-lysine functionalized celluloses for enhanced removal of Pb(II) from aqueous medium

In this study, two novel biosorbents of l-lysine grafted cellulose (L-PCM, L-TCF) were prepared for Pb(II) removal from aqueous solutions. Various adsorption parameters were surveyed, such as adsorbent dosages, initial concentration of Pb(II), temperature and pH, using adsorption techniques. At normal temperature, less adsorbent can achieve better adsorption capacity (89.71 ± 0.27 mg g^-1 with 0.5 g L^-1 of L-PCM, 16.84 ± 0.02 mg g^-1 with 3.0 g L^-1 of L-TCF). The pH range of application for L-PCM was 4-12 and that of L-TCF was 4-13. The adsorption of Pb(II) by biosorbents went through the boundary layer diffusion stage and void diffusion stage. The adsorption mechanism was chemisorption based on multilayer heterogeneous adsorption. The pseudo-second-order model fitted the adsorption kinetics perfectly. The Freundlich isotherm model adequately described Multimolecular equilibrium relationship between Pb(II) and biosorbents; the predicted maximum adsorption capacities of the two adsorbents were 904.12 and 46.74 mg g^-1, respectively. The results showed that the adsorption mechanism was the electrostatic attraction between Pb(II) and -COOH and the complexation between Pb(II) and -NH₂. This work demonstrated that l-lysine modified cellulose-based biosorbents have great potential in the field of Pb(II) removal from aqueous solutions.

Synthesis and characterization of a novel N-rich porous organic polymer and its application as an efficient porous adsorbent for the removal of Pb(II) and Cd(II) ions from aqueous solutions

In this study, a novel N-rich triazine-based porous organic polymer (NR-POP) was synthesized via Schiff-base condensation. The structure of the synthesized porous polymer was identified using FT-IR, XRD, SEM, EDS, TEM, TGA, and BET analyses. The adsorption efficiency of this polymer was investigated for the removal of lead and cadmium ions pollutants. The adsorption processes of Pb(II) and Cd(II) metal ions by this polymer adsorbent were exothermic and matched by the Langmuir isotherm with a high correlation coefficient (R² = 0.9904, 0.9778), the maximum adsorption capacity (833.33, 178.57 mg g^-1), and the pseudo-second-order kinetic model. Furthermore, NR-POP showed an excellent adsorption selectivity for Pb(II) compared to Cd(II).

Preparation of a sulfonated coal@ZVI@chitosan-acrylic acid composite and study of its removal of groundwater Cr(VI)

In this research, a new composite adsorbent (SC@ZVI@CS-AA) was designed and synthesized, and its application for the removal of Cr(VI) in groundwater was investigated. The interaction between SC@ZVI@CS-AA and Cr(VI) conformed to a pseudo-second-order model, and the adsorption process was dominated by chemisorption. The effects of material ratios, pH, temperature, SC@ZVI@CS-AA dosage, and coexisting ions on the removal of Cr(VI) were investigated. The removal efficiency of Cr(VI) by SC@ZVI@CS-AA reached 95%, and the reaction was significantly inhibited when SO₄^2- was present. Thermodynamically, the adsorption of Cr(VI) proceeded spontaneously above 35 °C (ΔG^θ < 0). According to scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectrometry, and synchronous thermal analysis, the removal mechanism of Cr(VI) by SC@ZVI@CS-AA was attributed to electrostatic attraction and reduction. In addition, SC@ZVI@CS-AA had good cyclic adsorption performance. Overall, the SC@ZVI@CS-AA composite showed great potential in the remediation of Cr(VI)-contaminated groundwater.

In situ growth of ZIF-8 on carboxymethyl chitosan beads for improved adsorption of lead ion from aqueous solutions

In this study, a method for the in situ growth of zeolitic imidazolate framework-8 (ZIF-8) on carboxymethyl chitosan beads (BCMC) to produce a composite adsorbent (BCMC@ZIF-8) for the removal of Pb²⁺ from water is proposed. The results revealed that the utilization of the BCMC as a framework enhanced the stability of ZIF-8, and the presence of the latter in the composite improved the removal efficiency of Pb²⁺ from water. Data from X-ray photoelectron spectroscopy analysis and adsorption kinetics revealed that the adsorption mechanism included diffusion and the sharing/transfer of electrons between BCMC@ZIF-8 and Pb²⁺. The maximum adsorption capacity of BCMC@ZIF-8 fitted using the Langmuir model was 566.09 mg/g. Results of the experiments on the regeneration of the adsorbent and its stability in water further indicated that BCMC improved the stability of ZIF-8. This study demonstrated that the stability of metal-organic framework (MOF) materials, which exhibited high efficiencies for the removal of heavy metals in water can be improved through fixation of the polymer skeleton. Thus, the present study offers practical and theoretical guidance for the application of MOF materials in water treatment.

Ecofriendly sustainable synthetized nano-composite for removal of heavy metals from aquatic environment

The toxicity of heavy metals in the aquatic environment is a serious challenge to the global community. Even at low concentrations, heavy metals have a cumulatively destructive effect on living organisms in the aquatic environment. Biomass wastes have been investigated for heavy metals removal in the published literature; however, the low performance and capacity of the biomass represents a drawback towards effective application. Therefore, in this study, biomass waste such as corn leaves that have low cost is investigated as a precursor for eco-friendly sustainable nanostructured composite. In this research, several experiments have been conducted focusing on upgrading the capacity of the bioresource for removing heavy metals from the aquatic environment. In addition to low-cost biomass material, nanomaterials such as zinc oxide represents an attractive combination for effective removing heavy metals such as iron and nickel ions. Characterization of the synthesized composite material was conducted using XRD–FESEM-mapping and EDX–HRTEM and SAED–Zeta size and Zeta potential. Moreover, studying the efficiency of synthesized nano-composite for heavy metals ions adsorption of iron and nickel ions shows an outstanding increase of performance. The results suggest that adding nanomaterial to biomass matter and obtaining a composite at nanosize, enables the increase of the adsorption efficiency of heavy metals.

Chitosan Nanoparticle-Based System: A New Insight into the Promising Controlled Release System for Lung Cancer Treatment

Lung cancer has been recognized as one of the most often diagnosed and perhaps most lethal cancer diseases worldwide. Conventional chemotherapy for lung cancer-related diseases has bumped into various limitations and challenges, including non-targeted drug delivery, short drug retention period, low therapeutic efficacy, and multidrug resistance (MDR). Chitosan (CS), a natural polymer derived from deacetylation of chitin, and comprised of arbitrarily distributed β-(1-4)-linked d-glucosamine (deacetylated unit) and N-acetyl-d-glucosamine (acetylated unit) that exhibits magnificent characteristics, including being mucoadhesive, biodegradable, and biocompatible, has emerged as an essential element for the development of a nano-particulate delivery vehicle. Additionally, the flexibility of CS structure due to the free protonable amino groups in the CS backbone has made it easy for the modification and functionalization of CS to be developed into a nanoparticle system with high adaptability in lung cancer treatment. In this review, the current state of chitosan nanoparticle (CNP) systems, including the advantages, challenges, and opportunities, will be discussed, followed by drug release mechanisms and mathematical kinetic models. Subsequently, various modification routes of CNP for improved and enhanced therapeutic efficacy, as well as other restrictions of conventional drug administration for lung cancer treatment, are covered.

Flocculation of combined contaminants of dye and heavy metal by nano-chitosan flocculants

In this study, two multifunctional nano-chitosan flocculants (CPAM-NCS1 and CPAM-NCS2) were made through the graft modification of cationic monomer and carboxymethylchitosan (CMCTS) to remove combined contaminants. The effects of various factors (pH, flocculant dosage and hydraulic mixing conditions) on the flocculation performance under single and composite pollution conditions were systematically investigated, the optimal chemical oxygen demand (COD) and the chromaticity removal rates in the dye wastewater were 79.9% and 83.9% at wastewater pH 7, the fast stirring rate 300 rpm, the fast stirring time 8 min, and the dosage of CPAM-NCS1 80 mg/L, respectively. The optimal removal rates of Cu (II) obtained by CPAM-NCS1 and CPAM-NCS2 at were 80.3% and 75.2% at 60 mg/L and the wastewater pH 7, respectively. The optimal removal rates of Cu (II) and disperse orange were 85.3% and 89.4%, respectively, in a composite pollutant system in which Cu (II) and disperse orange coexisted when the pH of the composite system was 9 and the dosage of CPAM -NCS1 was 60 mg/L. This study proved that nanoflocculants made by modifying CMCTS with different structures can demonstrate ideal flocculation removal performance for dye and heavy metal wastewaters.

High Removal Efficiency of Diatomite-Based X Zeolite for Cu2+ and Zn2

Diatomite-based X zeolite was obtained and its crystallinity, morphology, and interface properties were investigated by XRD, BET, SEM, EDS, and XRF. The obtained X zeolite possessed a unique meso-microporous structure and showed good ion exchange properties for Cu²⁺ and Zn²⁺. The pseudo-second-order model and Langmuir isotherm model can best describe the adsorption kinetics and isotherms of Cu²⁺ and Zn²⁺, respectively. The maximal adsorption capacities of X zeolite for Cu²⁺ and Zn²⁺ were 146 and 195 mg/g at 323 K, respectively. Meanwhile, the adsorption process for Cu²⁺ and Zn²⁺ were chemical adsorption and ion exchange, respectively. Furthermore, the adsorption data turned out to be an endothermic and spontaneous process. Compared with other reported materials, the adsorption capacity of X zeolite synthesized from diatomite was among the highest. Therefore, it could be a promising adsorbent for the disposal of wastewater that contains metal ions.

Preparation and Characterization of High-Efficiency Magnetic Heavy Metal Capture Flocculants

In this study, a high-efficiency magnetic heavy metal flocculant MF@AA was prepared based on carboxymethyl chitosan and magnetic Fe3O4. It was characterized by SEM, FTIR, XPS, XRD and VSM, and the Cu(II) removal rate was used as the evaluation basis for the preparation process. The effects of AMPS content, total monomer concentration, photoinitiator concentration and reaction time on the performance of MF@AA flocculation to remove Cu(II) were studied. The characterization results show that MF@AA has been successfully prepared and exhibits good magnetic induction characteristics. The synthesis results show that under the conditions of 10% AMPS content, 35% total monomer concentration, 0.04% photoinitiator concentration, and 1.5 h reaction time, the best yield of MF@AA is 77.69%. The best removal rate is 87.65%. In addition, the response surface optimization of the synthesis process of MF@AA was performed. The optimal synthesis ratio was finally determined as iron content 6.5%, CMFS: 29.5%, AM: 53.9%, AMPS: 10.1%. High-efficiency magnetic heavy metal flocculant MF@AA shows excellent flocculation performance in removing Cu(II). This research provides guidance and ideas for the development of efficient and low-cost flocculation technology to remove Cu(II) in wastewater.