A facial strategy to efficiently improve catalytic performance of CoFe2O4 to peroxymonosulfate

Cobalt germanium hydroxides with asymmetric electron distribution and surface hydroxyl groups for superb catalytic degradation performances

Peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs) are attractive approaches for solving the global problem of water pollution, due to the generation of highly-active reactive oxygen species (ROS). Therefore, highly-efficient PMS activation is crucial for promoting the catalytic degradation of environmental pollutants. Here, bimetallic CoGeO2(OH)2 nanosheets with abundant surface hydroxyl groups (CGH) were synthesized via a simple hydrothermal route for PMS activation and degradation of various organic contaminants for the first time. The abundant surface hydroxyl groups (≡Co-OH/≡Ge-OH) could promptly initiate PMS to generate highly-active species: singlet oxygen (1O2), sulfate radicals (SO4·-) and hydroxyl radicals (HO•), while the asymmetric electron distribution among Co-O-Ge bonds derived from the higher electronegativity of Ge than Co further enhances the quick electron transfer to promote the redox cycle of Co2+/Co3+ and Ge2+/Ge4+, thereby achieving an outstanding catalytic capability. The optimal catalyst exhibits nearly 100 % catalytic degradation performance of dyes (Methylene blue, Rhodamine B, Methyl orange, Orange II, Methyl green) and antibiotics (Norfloxacin, Bisphenol A, Tetracycline) over a wide pH range of 3-11 and under different coexisting anion conditions (Cl-, HCO3-, NO3-, HA), suggesting the excellent adaptability for practical usage. This study could potentially lead to novel perspectives on the remediation of water areas such as groundwater and deep-water areas.

Sustainable upcycling of copper from waste printed circuit boards with the assistance of tannic acid and Fe3+ to a magnetic heterogeneous catalyst

The recovery and upcycling of metals from electronic waste into functional materials for wastewater treatment is a win-win strategy for simultaneously realizing electronic waste recycling and wastewater purification. This study focused on converting Cu from waste printed boards (PCBs), a common Cu-rich electronic waste, into CuFe2O4 supported on a mesoporous carbon framework (PCFT) with the assistance of Fe3+ and tannic acid (TA). Compared to the PCF prepared without TA, the resulting PCFT exhibited excellent magnetic properties, high crystallinity, lower interfacial transfer resistance, more abundant oxygen vacancies (OV), and lower metal leaching. Moreover, PCFT can serve as a superior heterogeneous catalyst to activate peroxymonosulfate to remove reactive brilliant blue KN-R from wastewater, and its catalytic activity was markedly higher than that of CFT synthesized with Cu(NO3)2·3H2O, which may be due to its higher specific surface area and more abundant OV. The combined results of scavenging experiments, electron paramagnetic resonance analysis, and electrochemical measurements implied that both radical and nonradical processes promoted the elimination of KN-R; however, •OH and SO4•- were not the major contributors. Furthermore, the PCFT exhibited high adaptability to pH and water matrices, confirming its practical application potential. These findings provide a novel strategy for the upcycling of metals from electronic waste.

Facet-dependent activation of oxalic acid over hematite nanocrystals under the irradiation of visible light for efficient degradation of pollutants

Naturally occurring hematite has been widely studied in the Fenton-like system for water pollutant remediation due to its abundance and non-toxicity. However, its inadequate catalytic activity results in difficulty in effectively degrading pollutants in the catalytic degradation system that it constitutes. Thus, we constructed a photochemical system composed of hematite with {001} facet of high activity facet and low-cost and non-toxic oxalic acid (OA) for the removal of various types of pollutants. The removal rate for the degradation of metronidazole, tetracycline hydrochloride, Rhodamine B, and hexavalent chromium by hematite nanoplate with the exposed {001} facet activating OA under visible light irradiation was 4.75, 2.25, 2.33, and 2.74 times than that by the exposed {110} facet, respectively. Density functional theory (DFT) calculation proved that the OA molecule was more easily adsorbed on the {001} facet of hematite than that on the {110} facet, which would favor the formation of the more Fe(III)-OA complex and reactive species. In addition, the reactive site of metronidazole for the attraction of radicals was identified on the basis of the DFT calculation on the molecular occupied orbitals, and the possible degradation pathway for metronidazole included carbon chain fracture, hydroxyethyl-cleavage, denitrogenation, and hydroxylation. Thus, this finding may offer a valuable direction in designing an efficient iron-based catalyst based on facet engineering for the improved activity of Fenton-like systems such as OA activation.

Mn-Co-Ce/biochar based particles electrodes for removal of COD from coking wastewater by 3D/HEFL system: Characteristics, optimization, and mechanism

In this work, the Mn, Co, Ce co-doped corn cob biochar (MCCBC) as catalytic particle electrodes in a three-dimensional heterogeneous electro-Fenton-like (3D-HEFL) system for the efficient degradation of coking wastewater was investigated. Various characterization methods such as SEM, EDS, XRD, XPS and electrochemical analysis were employed for the prepared materials. The results showed that the MCCBC particle electrodes had excellent electrochemical degradation performances of COD in coking wastewater, and the COD removal and degradation rates of the 3D/HEFL system were 85.35% and 0.0563 min-1 respectively. RSM optimized conditions revealed higher COD removal rate at 89.23% after 31.6 min of electrolysis. The efficient degradability and wide adaptability of the 3D/HEFL system were due to its beneficial coupling mechanism, including the synergistic effect between the system factors (3D and HEFL) as well as the synergistic interactions between the ROS (dominated by •OH and supplemented by O2•-) in the system. Moreover, the COD removal rate of MCCBC could still remain at 81.41% after 5 cycles with a lower ion leaching and a specific energy consumption of 11.28 kWh kg-1 COD. The superior performance of MCCBC, as catalytic particle electrodes showed a great potential for engineering applications for the advanced treatment of coking wastewater.

Enhancing dye degradation using a novel cobalt metal-organic framework as a peroxymonosulfate activator

Among transition metals, cobalt ions exhibit superior catalytic activity in the peroxymonosulfate (PMS) degradation of pollutants. However, practical application is hindered by their high rate of ion leaching and the propensity for particle reunion issues. In this study, a novel cobalt metal-organic framework catalyst, denoted as CUST-565 ([Co3(BTB)2(BIPY)2]·4.5H2O·DMA), was synthesized via a one-step solvothermal method. The obtained crystal was employed as a catalyst to activate PMS for degrading two pollutants, methyl orange (MO) and rhodamine B (RhB), in wastewater. The catalyst demonstrated efficacy in PMS, achieving 97% degradation of MO and 98% degradation of RhB within 30 min at an initial concentration of 20.0 mg L-1. Additionally, various factors affecting dye degradation, including PMS dosage, catalyst dosage, temperature, initial pH, and coexisting anions, were investigated. Radical quenching experiments confirmed the presence of sulfate radicals (SO4˙-), hydroxyl radicals (HO˙), superoxide radicals (O2˙-), and singlet oxygen (1O2) in the system. After four cycles, CUST-565 retained its ability to catalytically degrade approximately 80% of the pollutants. These observed stability and reusability properties, corroborated by a series of characterization analyses before and after use, suggest that CUST-565 exhibits reliable performance. This work contributes to the development of cobalt-PMS catalysts for efficiently degrading dyes in wastewater.

Degradation of tetracycline by peroxymonosulfate activated with Mn0.85Fe2.15O4-CNTs: Key role of singlet oxygen

Tetracycline (TC) is a kind of electron-rich organic, and singlet oxygen (¹O₂) oxidative pathway-based advanced oxidation processes (AOPs) have represented outstanding selective degradation to such pollutants. In this paper, an excellent prepared strategy for ¹O₂ dominated catalyst was adopted. A catalyst composed of non-stoichiometric doping Mn-Fe bimetallic oxide supported on CNTs (0.3-Mn_0.85Fe_2.15O₄-CNTs) was synthesized and optimized by regulating the non-stoichiometric doping ratio of Mn & Fe and the loading amount of CNTs. Through optimization and control experiments, the optimized catalyst represented 94.9% of TC removal efficiency within 60 min in neutral condition under relatively low concentrations of Mn_0.85Fe_2.15O₄-CNTs (0.4 g/L) and PMS (0.8 mM). Through SEM and XRD characterization, Mn_0.85Fe_2.15O₄-CNTs was a hybrid of cubic Mn_0.85Fe_2.15O₄ uniformly dispersing on CNTs. By the characterization of XPS and FT-IR, more CO bonds and low-valent Mn (II) & Fe (II) appeared in Mn_0.85Fe_2.15O₄-CNTs. Reactive oxygen species (ROS) was determined by radical quenching experiments and electron spin resonance (EPR) spectroscopy, and ¹O₂ was verified to be the dominated ROS. The mechanism for PMS' activation was speculated, and more low-valent Mn (II) and Fe (II) contributed to the production of free-radical (•OH & SO₄^•-), while the reaction between PMS and the enhanced CO bond on Mn_0.85Fe_2.15O₄-CNTs played a crucial part in the generation of ¹O₂. In addition, through the comparative degradation of four different organics with distinct charge densities, the excellent selectivity of ¹O₂-based oxidative pathway to electron-rich pollutants was found. This paper supplied a good strategy to prepare catalyst for PMS activation to form a ¹O₂-dominated oxidative pathway.

Novel Functional Soft Magnetic CoFe2O4/Fe Composites: Preparation, Characterization, and Low Core Loss

In this study, composites CoFe₂O₄/Fe were successfully synthesized by in situ oxidation, and their composition, structure, and magnetic properties have been investigated. According to the analysis of X-ray photoelectron spectrometry measure results, the cobalt ferrite insulating layer was completely coated on the surface of Fe powder particles. The evolution of the insulating layer during the annealing process has been discussed, which is correlated to effects on the magnetic properties of the composites CoFe₂O₄/Fe. The amplitude permeability of the composites reached a maximum of 110, and their frequency stability reached 170 kHz with a relatively low core loss of 253.6 W/kg. Therefore, the composites CoFe₂O₄/Fe has potential application in the field of integrated inductance and high-frequency motor, which is conducive to energy conservation and carbon reduction.

Efficient degradation of atrazine through in-situ anchoring NiCo2O4 nanosheets on biochar to activate sulfite under neutral condition

Sulfite (S(IV)) is a promising substitute for sulfate radical-based advanced oxidation processes. Here, a composite of in-situ anchoring NiCo₂O₄ nanosheets on biochar (BC) was firstly employed as a heterogeneous activator for sulfite (NiCo₂O₄@BC-sulfite) to degrade atrazine (ATZ) in the neutral environment. The synergistic coupling of BC and NiCo₂O₄ endows the resulting composite excellent catalytic activity. 82% of the degradation ratio of ATZ (1 mg/L) could be achieved within 10 min at initial concentrations of 0.6 g/L NiCo₂O₄@BC, 3.0 mmol/L sulfite in neutral environment. When further supplementing sulfite into the system at 20 min (considering the depletion of sulfite), outstanding degradation efficiency (∼ 100%) were achieved in the next 10 min without any other energy input by the NiCo₂O₄@BC-sulfite system. The features of the prepared catalysts and the effects of some key parameters on ATZ degradation were systematically examined. A strong inner-sphere complexation (Co²⁺/Ni²⁺-SO₃^2-) was explored between sulfite and the metal sites on the NiCo₂O₄@BC surface. The redox cycle of the surface metal efficiently mediated sulfite activation and triggered the series radical chain reactions. The generated radicals, in particular the surface-bound radicals were involved in ATZ degradation. High performance liquid chromatography-tandem mass spectrometry (LC-MS) technique was used to detect the degradation intermediates. Density functional theory (DFT) calculations were performed to illustrate the possible degradation pathways of ATZ. Finally, an underlying mechanism for ATZ removal was proposed. The present study offered a low-cost and sustainable catalyst for sulfite activation to remove ATZ in an environmentally friendly manner from wastewater.

Core-shell magnetic CFO@COF composites toward peroxymonosulfate activation for degradation of sulfamethoxazole from aqueous solution: A comparative study and mechanistic consideration

A core-shell covalent organic framework encapsulated Co1.2Fe1.8O4 magnetic particles (CFO@COF) was designed and prepared successfully to activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) degradation. It displays amazing catalytic reactivity since the unique interior structure and synergistic effect between COF shell and CFO core, reaching 99.8% removal of SMX (10 mg/L) within 30 min and 90.8% TOC removal. The synergy between bimetals vests high reactivity to CFO core. And the outer COF shell can stabilize the CFO core under intricate reaction conditions to restrain the leaching of Co ions (decreased from 0.75 to 0.25 mg/L). Further investigation compared the activation mechanism in two different system, CFO/PMS system and CFO@COF/PMS system. The result showed that the radical mechanism controlled by SO4⋅- guided the SMX degradation in CFO/PMS system whereas the 1O2 played a pivotal role in CFO@COF/PMS system called non-radical leading. The influences of various factors on degradation experiments and SMX degradation pathway were also studied. Most importantly, risk assessment in CFO@COF/PMS/SMX system was estimated via "ecological structure activity relationships". In most case, the toxicities of intermediates were lower than the initial samples, which confirmed the effectiveness of CFO@COF/PMS/SMX system in the reduction of toxicity of SMX.