Kinetics of glyphosate and aminomethylphosphonic acid sorption onto montmorillonite clays in soil and their translocation to genetically modified corn

Chromatographic Methods for the Determination of Glyphosate in Cereals Together with a Discussion of Its Occurrence, Accumulation, Fate, Degradation, and Regulatory Status

The European Union's recent decision to renew the authorization for the use of glyphosate until 15 December 2033 has stimulated scientific discussion all around the world regarding its toxicity or otherwise for humans. Glyphosate is a chemical of which millions of tons have been used in the last 50 years worldwide to dry out weeds in cultivated fields and greenhouses and on roadsides. Concern has been raised in many areas about its possible presence in the food chain and its consequent adverse effects on health. Both aspects that argue in favor of toxicity and those that instead may indicate limited toxicity of glyphosate are discussed here. The widespread debate that has been generated requires further investigations and field measurements to understand glyphosate's fate once dispersed in the environment and its concentration in the food chain. Hence, there is a need for validated analytical methods that are available to analysts in the field. In the present review, methods for the analytical determination of glyphosate and its main metabolite, AMPA, are discussed, with a specific focus on chromatographic techniques applied to cereal products. The experimental procedures are explained in detail, including the cleanup, derivatization, and instrumental conditions, to give the laboratories involved enough information to proceed with the implementation of this line of analysis. The prevalent chromatographic methods used are LC-MS/MS, GC-MS/SIM, and GC-MS/MS, but sufficient indications are also given to those laboratories that wish to use the better performing high-resolution MS or the simpler HPLC-FLD, HPLC-UV, GC-NPD, and GC-FPD techniques for screening purposes. The concentrations of glyphosate from the literature measured in wheat, corn, barley, rye, oats, soybean, and cereal-based foods are reported, together with its regulatory status in various parts of the world and its accumulation mechanism. As for its accumulation in cereals, the available data show that glyphosate tends to accumulate more in wholemeal flours than in refined ones, that its concentration in the product strictly depends on the treatment period (the closer it is to the time of harvesting, the higher the concentration), and that in cold climates, the herbicide tends to persist in the soil for a long time.

In vitro and in vivo remediation of per- and polyfluoroalkyl substances by processed and amended clays and activated carbon in soil

Remediation methods for soil contaminated with poly- and perfluoroalkyl substances (PFAS) are needed to prevent their leaching into drinking water sources and to protect living organisms in the surrounding environment. In this study, the efficacy of processed and amended clays and carbons as soil amendments to sequester PFAS and prevent leaching was assessed using PFAS-contaminated soil and validated using sensitive ecotoxicological bioassays. Four different soil matrices including quartz sand, clay loam soil, garden soil, and compost were spiked with 4 PFAS congeners (PFOA, PFOS, GenX, and PFBS) at 0.01-0.2 μg/mL and subjected to a 3-step extraction method to quantify the leachability of PFAS from each matrix. The multistep extraction method showed that PFAS leaching from soil was aligned with the total carbon content in soil, and the recovery was dependent on concentration of the PFAS. To prevent the leaching of PFAS, several sorbents including activated carbon (AC), calcium montmorillonite (CM), acid processed montmorillonite (APM), and organoclays modified with carnitine, choline, and chlorophyll were added to the four soil matrices at 0.5-4 % w/w, and PFAS was extracted using the LEAF method. Total PFAS bioavailability was reduced by 58-97 % by all sorbents in a dose-dependent manner, with AC being the most efficient sorbent with a reduction of 73-97 %. The water leachates and soil were tested for toxicity using an aquatic plant (Lemna minor) and a soil nematode (Caenorhabditis elegans), respectively, to validate the reduction in PFAS bioavailability. Growth parameters in both ecotoxicological models showed a dose-dependent reduction in toxicity with value-added growth promotion from the organoclays due to added nutrients. The kinetic studies at varying time intervals and varying pHs simulating acidic rain, fresh water, and brackish water suggested a stable sorption of PFAS on all sorbents that fit the pseudo-second-order for up to 21 days. Contaminated soil with higher than 0.1 μg/mL PFAS may require reapplication of soil amendments every 21 days. Overall, AC showed the highest sorption percentage of total PFAS from in vitro studies, while organoclays delivered higher protection in ecotoxicological models (in vivo). This study suggests that in situ immobilization with soil amendments can reduce PFAS leachates and their bioavailability to surrounding organisms. A combination of sorbents may facilitate the most effective remediation of complex soil matrices containing mixtures of PFAS and prevent leaching and uptake into plants.

Control of Urochloa decumbens Using Glyphosate Applied by Remotely Piloted Aircraft and Ground Sprayer with Different Spray Nozzles

The use of remotely piloted aircraft (RPA) to spray pesticides currently occurs, but knowledge about this technology is lacking due to the different locations, targets, and products applied. The objective of this study was to evaluate the control of Urochloa decumbens with glyphosate applied using an RPA (10 L ha-1) equipped with different spray nozzles (XR 11001 and AirMix 11001). For the purpose of comparison, ground application was also performed (100 L ha-1). The deposition was evaluated by means of the quantification of a tracer by spectrophotometry, the droplet spectrum was evaluated with water-sensitive paper, and the control efficiency was evaluated based on visual measurements with percentage scores. Statistical process control was used to analyse the quality of the deposition in the area. The results showed that the application via RPA presented a greater amount of tracer on the leaves than the ground application, suggesting that the former is a good option for application, even providing a lower coverage and number of droplets per area. Both application methods were effective at controlling Urochloa decumbens. The nozzles showed potential for use in applications, with control efficiency higher than 84% from 21 days after application. The percentage of droplets smaller than 100 μm in the applications was less than 5%. No nonrandom behaviour was observed during deposition, indicating a high-quality process.

Adsorption and removal of polystyrene nanoplastics from water by green-engineered clays

Human exposure to micro- and nanoplastics (MNPs) commonly occurs through the consumption of contaminated drinking water. Among these, polystyrene (PS) is well-characterized and is one of the most abundant MNPs, accounting for 10 % of total plastics. Previous studies have focused on carbonaceous materials to remove MNPs by filtration, but most of the work has involved microplastics since nanoplastics (NPs) are smaller in size and more difficult to measure and remove. To address this need, green-engineered chlorophyll-amended sodium and calcium montmorillonites (SMCH and CMCH) were tested for their ability to bind and detoxify parent and fluorescently labeled PSNP using in vitro, in silico, and in vivo assays. In vitro dosimetry, isothermal analyses, thermodynamics, and adsorption/desorption kinetic models demonstrated 1) high binding capacities (173-190 g/kg), 2) high affinities (103), and 3) chemisorption as suggested by low desorption (≤42 %) and high Gibbs free energy and enthalpy (>|-20| kJ/mol) in the Langmuir and pseudo-second-order models. Computational dynamics simulations for 30 and 40 monomeric units of PSNP depicted that chlorophyll amendments increased the binding percentage and contributed to the sustained binding. Also, 64 % of PSNP bind to both the head and tail of chlorophyll aggregates, rather than the head or tail only. Fluorescent PSNP at 100 nm and 30 nm that were exposed to Hydra vulgaris showed concentration-dependent toxicity at 20-100 µg/mL. Importantly, the inclusion of 0.05-0.3 % CMCH and SMCH significantly (p ≤ 0.01) and dose-dependently reduced PSNP toxicity in morphological changes and feeding rate. The bioassay validated the in vitro and in silico predictions about adsorption efficacy and mechanisms and suggested that CMCH and SMCH are efficacious binders for PSNP in water.

Immobilization of phosphorus in water-sediment system by iron-modified attapulgite, calcite, bentonite and dolomite under feed input condition: Efficiency, mechanism, application mode effect and response of microbial communities and iron mobilization

Four kinds of iron-based materials, i.e., iron-modified attapulgite, calcite, bentonite and dolomite (abbreviated as Fe-ATP, Fe-CA, Fe-BT and Fe-DOL, respectively) were prepared and used to immobilize the phosphorus in the system of overlying water (O-water) and sediment under the feed input condition, and their immobilization efficiencies and mechanisms were investigated. The influence of application mode on the immobilization of phosphorus in the water-sediment system by Fe-ATP, Fe-CA, Fe-BT and Fe-DOL was researched. The effects of Fe-ATP, Fe-CA, Fe-BT and Fe-DOL on the concentration of labile iron in the water-sediment system and the microbial communities in sediment were also studied. The results showed that the Fe-ATP, Fe-CA, Fe-BT and Fe-DOL addition all can effectively immobilize the soluble reactive phosphorus (SRP), dissolved total phosphorus (DTP) and diffusive gradients in thin-films (DGT)-labile phosphorus in O-water under the feed input condition, and also had the ability to inactivate the DGT-labile phosphorus in the top sediment. Although the change in the application mode from the one-time addition to the multiple addition reduced the inactivation efficiencies of SRP and DTP in O-water in the early period of application, it increased the immobilization efficiencies in the later period of application. Although Fe-ATP, Fe-CA, Fe-BT and Fe-DOL had a certain releasing risk of iron into the pore water, they had negligible risk of iron release into O-water. The addition of Fe-ATP, Fe-CA, Fe-BT or Fe-DOL reshaped the sediment bacterial community structure and can affect the microorganism-driven phosphorus cycle in the sediment. Results of this work suggest that Fe-ATP, Fe-CA, Fe-BT and Fe-DOL are promising phosphorus-inactivation materials to immobilize the phosphorus in the water-sediment system under the feed input condition.

Facile and innovative application of surfactant-modified-zeolite from Austrian fly ash for glyphosate removal from water solution

This study highlights a pioneering approach in the development of an efficient, affordable, and economically feasible adsorbent specifically tailored for the removal of glyphosate (Gly) from contaminated water. To accomplish this objective, a low-cost and pure NaA Zeolite (NaAZ) was synthesized with 93% crystallinity from Austrian fly ash (AFA) as a precursor for the first-time. Taguchi design was employed to optimize critical parameters such as the SiO2/Al2O3 ratio, alkalinity concentration, time, and temperature. The cation exchange capacity (CEC) and external cation exchange capacity (ECEC) are determined as critical factors for the modification process. Subsequently, the pure NaAZ was modified with hexadecyl trimethyl ammonium chloride (HDTMAC), a cationic surfactant. The utilization of surfactant-modified zeolite (SMZ) for Gly removal demonstrates its innovative application in this field, highlighting its enhanced adsorption capacity and optimized surface properties. The AFA, NaAZ, and SMZ were characterized using analytical techniques including XRD, XRF, FTIR-ATR, SEM, TGA, BET, CHNSO analyzer and ICP-OES. The adsorbent exhibited effective Gly removal through its pH-dependent charge properties (pH 2-10), with an optimized pH 6 facilitating a significant electrostatic interaction between the adsorbent and Gly. SMZ demonstrated remarkable adsorption capacity and removal efficacy, surpassing most reported adsorbents with values of 769.23 mg/g and 98.92% respectively. Our study demonstrates the significant advantage of the SMZ, with a low leaching concentration of only 6 ppm after 60 days, ensuring environmental safety, long-term stability, and public health considerations. The kinetics of the adsorption process was well described by the pseudo-second order and the Freundlich isotherm. Pore diffusion and H-bonding were postulated to be involved in physisorption, whereas electrophilic interactions led to chemisorption type of adsorption. Consequently, SMZ provides a practical significance, broad applicability and promising solution for Gly removal, facilitating sustainable water treatment.

Lecithin-amended montmorillonite clays enhance the antibacterial effect of barrier creams

The objective of this study was to assess in vitro antibacterial activity of barrier cream (EVB) formulations containing either calcium montmorillonite (CM) or lecithin-amended montmorillonite (CML). All ingredients were generally recognized as safe (GRAS), and clay minerals were specifically studied due to their known ability to adsorb numerous toxins of human clinical relevance. Characterization of the EVB formulations showed good spreadability, pH, appearance, unity, viscosity, and no evidence of phase separation. Colony forming, disk diffusion susceptibility, and agar dilution assays were used to determine the minimal bactericidal concentration (MBC) of total EVB formulations, as well as respective individual ingredients, against E. coli. Active ingredients within the base EVB formulation were found to be essential oils and zinc oxide. EVB-CML at 0.5-25 mg/mL dose-dependently and significantly (p ≤ 0.01) enhanced the antibacterial activity of the base EVB formulation. MBC values for EVB-CML were 2.5 mg/mL in the colony forming assay and 0.75 mg/mL in the agar dilution test, with a zone of inhibition. Both EVB and EVB-CML displayed stronger antibacterial activity than four antimicrobial creams currently marketed in the United States. Moreover, this effect was rapid, favored by high temperature, and product stability testing suggested a shelf life of at least 10 months. Taken together, these findings demonstrate the ability of CML to enhance the antibacterial effect of the base EVB formulation against E. coli. This novel EVB-CML formulation represents a promising advancement toward improved antibacterial efficacy beyond current industry standards for commercial skin creams and sunscreens.