Unveiling the mechanisms of Fe(III)-loaded chitosan composite (CTS-Fe) in enhancing anaerobic digestion of waste activated sludge

Effect of lysozyme combined with hydrothermal pretreatment on excess sludge and anaerobic digestion

Anaerobic digestion (AD) is widely employed for sludge stabilization and waste reduction. However, the slow hydrolysis process hinders methane production and leads to prolonged sludge issues. In this study, an efficient and eco-friendly lysozyme pre-treatment method was utilized to address these challenges. By optimizing lysozyme dosage, hydrolysis and cell lysis were maximized. Furthermore, lysozyme combined with hydrothermal pretreatment enhanced overall efficiency. Results indicate that: (1) When lysozyme dosage reached 90 mg/g TS after 240 min of pretreatment, SCOD, soluble polysaccharides, and protein content reached their maxima at 855.00, 44.09, and 204.86 mg/L, respectively. This represented an increase of 85.87%, 365.58%, and 259.21% compared to the untreated sludge. Three-dimensional fluorescence spectroscopy revealed the highest fluorescence intensity in the IV region (soluble microbial product), promoting microbial metabolic activity. (2) Lysozyme combined with hydrothermal pretreatment significantly increased SCOD, soluble proteins, and polysaccharide release from sludge, reducing SCOD release time. Orthogonal experiments identified Group 3 as the most effective for SCOD and soluble polysaccharide release, while Group 9 released the most soluble proteins. The significance order of factors influencing SCOD, soluble proteins, and polysaccharide release is hydrothermal temperature > hydrothermal time > enzymatic digestion time.(3) The lysozyme-assisted hydrothermal pretreatment group exhibited the fastest release and the highest SCOD concentration of 8,135.00 mg/L during anaerobic digestion. Maximum SCOD consumption and cumulative gas production increased by 95.89% and 130.58%, respectively, compared to the control group, allowing gas production to conclude 3 days earlier.

Self-enhancement of bioenergy recovery from anaerobically digesting WAS with novel iron-based metal-organic framework assistance: Insights into electron transfer and metabolic pathways

Inadequate methane production and insufficient hydrolysis-acidification activity impede the practical application of anaerobic digestion (AD) of waste activated sludge (WAS). Recently, metal-organic framework (MOF) materials attains promising capability of controlling proton/electron transfer in AD processes. This study used a typical iron-based MOF and MIL-88A(Fe) to improve the methane production via digesting WAS. These materials were prepared via a one-step hydrothermal method. The findings indicated that the addition of 150 mg MIL-88A(Fe)/g WAS VS resulted in a 57.23% increase in accumulated methane production and a 43.84% increase in daily maximum methane production. The methane production rate (Rmax) also increased from 22.25 to 29.14 mL/g VS/d. The enhanced electron transfer capacity, improved hydrolysis of WAS, boosted acetate generation, and mitigated accumulation of volatile fatty acids (VFAs) collectively contributed to the better methane yield in the MIL-88A(Fe)-added system. The significant enrichment of Methanobacterium and Methanosaeta along with the up-regulation of key methanogenesis enzyme-encoding genes jointly suggested that the CO2 reduction and methanogenesis were strengthened. Moreover, MIL-88A(Fe) stimulated the production of c-type cytochrome and e-pili, facilitating direct interspecies electron transfer (DIET) between norank-f-SC-I-84 and Methanobacterium. This study provided new solutions for improving methane production and offered insights into the mechanism of enhanced methanogenesis of AD in the presence of MIL-88A(Fe).

Comparing the effects of magnetite-mediated direct interspecies electron transfer with biogas mixing-driven interspecies hydrogen transfer on anaerobic digestion

Although the promotive effect of direct interspecies electron transfer (DIET) on methane production has been well-documented, the practical applicability of DIET in different scenarios have not yet been systematically studied. This study compared the effects of magnetite-mediated DIET with conventional biogas mixing-driven interspecies hydrogen transfer (IHT) on anaerobic digestion (AD) of swine manure (SM). Compared with control, magnetite supplementation, biogas circulation, and their integration enhanced the CH4 yield by 19.3%, 25.9%, and 26.2%, respectively. Magnetite mainly enriched DIET-related syntrophic bacteria (Anaerolineae and Synergistia) and methanogens (Methanosarcina) to accelerate acidification and establish DIET, while biogas circulation mainly enriched hydrolytic bacteria (Clostridia) and hydrogenotrophic methanogens (Methanolinea and Methanobacterium) to promote hydrolysis and accelerate IHT. Coupling magnetite addition with biogas circulation led to the enrichment of the above six microorganisms to different extents. The effectiveness of the strategies for lowering the H2 pressure followed: magnetite + biogas circulation ≈ biogas circulation > magnetite. Under stress-free environment, the enhancement effect of magnetite-induced DIET was not even as pronounced as biogas circulation-a simple and common mixing strategy in commercial AD plants, and the promotion effect of magnetite was insignificant in the well-mixed digesters. In short, the magnetite-mediated DIET is not always effective in improving AD of SM.

Magnetic porous microspheres enhancing the anaerobic digestion of sewage sludge: Synergistic free and attached methanogenic consortia

The addition of exogenous materials is a commonly reported method for promoting the anaerobic digestion (AD) of sludge. However, most exogenous materials are nano-sized and their use encounters problems relating to a need for continuous replenishment, uncontrollability and non-recyclability. Here, magnetic porous microspheres (MPMs), which can be controlled by magnetic forces, were prepared and used to enhance the methanogenesis of sludge. It was observed that the MPMs were spherical particles with diameters of approximately 100 µm and had a stable macroporous hybrid structure of magnetic cores and polymeric shells. Furthermore, the MPMs had good magnetic properties and a strong solid-liquid interfacial electron transfer ability, suggesting that MPMs are excellent carriers for methanogenic consortia. Experimental results showed that the addition of MPMs increased methane production and the proportion of methane in biogas from AD by 100.0 % and 21.2 %, respectively, indicating the MPMs notably enhanced the methanogenesis of sludge. Analyses of variations in key enzyme activities and electron transfer in sludge samples with and without MPMs in AD revealed that the MPMs significantly enhanced the activities of key enzymes involved in hydrolysis, acidification and methanation. This was achieved mainly by enhancing the extracellular electron transfer to strengthen the proton motive force on the cell membrane, which provides more energy generation for methanogenic metabolism. A careful examination of the variations in the morphology, pore structure and magnetism of the MPMs before and after AD revealed that the MPMs increased the prevalence of many highly active anaerobes, and that this did not weaken the magnetic performance. The microbial community structure and metatranscriptomic analysis further indicated that the acetotrophic methanogens (i.e., Methanosaeta) were mainly in a free state and that CO2-reducing methanogens (i.e., Methanolinea and Methanobacterium) mainly adhered to the MPMs. The above synergistic metabolism led to efficient methanogenesis, which indicates that the MPMs optimised the spatial ecological niche of methanogenic consortia. These findings provide an important reference for the development of magnetic porous materials promoting AD.

Preparation of iron oxide-modified digestate biochar and effect on anaerobic digestion of kitchen waste

Two kinds of Fe2O3-modified digestate-derived biochar (BC) were prepared and their effects on anaerobic digestion (AD) of kitchen waste (40.0 g VS/L) were investigated, with BC and Fe2O3 addition used as a comparison. The results showed that Fe2O3-modified BC (Fe2O3-BC1 prepared by co-precipitation and Fe2O3-BC2 by impregnation) significantly increased methane yield (20.8 % and 16.4 %, respectively) and reduced volatile fatty acid concentration (35.6 % and 29.6 %, respectively). Microbial high-throughput analysis revealed that Fe2O3-modified BC selectively enriched Clostridium (47.3 %) and Methanosarcina (72.2 %), suggesting that direct interspecies electron transfer contributing to improved biogas production performance was established and enhanced. Correlation analysis indicated that biogas production performance was improved by the larger specific surface area (83.4 m2/g), pore volume (0.101 cm3/g), and iron content (97.4 g/Kg) of the BC. These results offer insights for enhancing the efficacy of AD processes using Fe2O3-modified BCs as additives.