Emulsion-alginate beads designed to control in vitro intestinal lipolysis: Towards appetite control

Fabrication and characterization of chitosan-pectin emulsion-filled hydrogel prepared by cold-set gelation to improve bioaccessibility of lipophilic bioactive compounds

Chitosan-pectin emulsion-filled hydrogel (EFH) was developed to enhance the bioaccessibility of lipophilic bioactive compounds through intestinal delivery. The EFH, incorporating a sodium caseinate-stabilized emulsion, was prepared using cold-set gelation under acidic conditions without crosslinking agents. Increasing the pectin concentration (0.75-1.50%, w/v) improved the mechanical strength and compactness of the EFH. The pH-responsive EFH retained the emulsion at pH 2.0 and released it at pH 7.4. In vitro digestion demonstrated that the EFH remained intact during oral and gastric stages, while the emulsion alone became destabilized. During intestinal digestion, the release of free fatty acids from the EFH decreased from 58.67% to 43.76% as the pectin concentration increased from 0.75% to 1.50%. EFH with 0.75% and 1.00% pectin significantly improved curcumin bioaccessibility compared to the emulsion alone. These findings demonstrate the potential of chitosan-pectin EFH as a novel carrier system for enhancing the bioaccessibility of lipophilic bioactive compounds.

A comparative study of the impacts of preparation techniques on the rheological and textural characteristics of emulsion gels (emulgels)

A subtype of soft solid-like substances are emulsion gels (emulgels; EGs). These composite material's structures either consist of a network of aggregated emulsion droplets or a polymeric gel matrix that contains emulsion droplets. The product's rheological signature can be used to determine how effective it is for a specific application. The interactions between these structured system's separate components and production process, however, have a substantial impact on their rheological imprint. Therefore, rational comprehension of interdependent elements, their structural configurations, and the resulting characteristics of a system are essential for accelerating our progress techniques as well as for fine-tuning the technological and functional characteristics of the finished product. This article presents a comprehensive overview of the mechanisms and procedures of producing EGs (i.e., cold-set and heat-set) in order to determine the ensuing rheological features for various commercial applications, such as food systems. It also describes the influence of these methods on the rheological and textural characteristics of the EGs. Diverse preparation methods are the cause of the rheological-property correlations between different EGs. In many ways, EGs can be produced using various matrix polymers, processing techniques, and purposes. This may lead to various EG matrix structures and interactions between them, which in turn may affect the composition of EGs and ultimately their textural and rheological characteristics.

In Vitro and In Vivo Evaluation of Epidermal Growth Factor (EGF) Loaded Alginate-Hyaluronic Acid (AlgHA) Microbeads System for Wound Healing

The management of skin injuries is one of the most common concerns in medical facilities. Different types of biomaterials with effective wound-healing characteristics have been studied previously. In this study, we used alginate (Alg) and hyaluronic acid (HA) composite (80:20) beads for the sustained release of epidermal growth factor (EGF) delivery. Heparin crosslinked AlgHA beads showed significant loading and entrapment of EGF. Encapsulated beads demonstrated biocompatibility with rat L929 cells and significant migration at the concentration of AlgHAEGF100 and AlgHAEGF150 within 24 h. Both groups significantly improved the expression of Fetal Liver Kinase 1 (FLK-1) along with the Intercellular Adhesion Molecule-1 (ICAM-1) protein in rat bone Mesenchymal stem cells (rbMSCs). In vivo assessment exhibited significant epithelialization and wound closure gaps within 2 weeks. Immunohistochemistry shows markedly significant levels of ICAM-1, FLK-1, and fibronectin (FN) in the AlgHAEGF100 and AlgHAEGF150 groups. Hence, we conclude that the EGF-loaded alginate-hyaluronic acid (AlgHA) bead system can be used to promote wound healing.

Emulgels: Promising Carrier Systems for Food Ingredients and Drugs

Novel delivery systems for cosmetics, drugs, and food ingredients are of great scientific and industrial interest due to their ability to incorporate and protect active substances, thus improving their selectivity, bioavailability, and efficacy. Emulgels are emerging carrier systems that represent a mixture of emulsion and gel, which are particularly significant for the delivery of hydrophobic substances. However, the proper selection of main constituents determines the stability and efficacy of emulgels. Emulgels are dual-controlled release systems, where the oil phase is utilized as a carrier for hydrophobic substances and it determines the occlusive and sensory properties of the product. The emulsifiers are used to promote emulsification during production and to ensure emulsion stability. The choice of emulsifying agents is based on their capacity to emulsify, their toxicity, and their route of administration. Generally, gelling agents are used to increase the consistency of formulation and improve sensory properties by making these systems thixotropic. The gelling agents also impact the release of active substances from the formulation and stability of the system. Therefore, the aim of this review is to gain new insights into emulgel formulations, including the components selection, methods of preparation, and characterization, which are based on recent advances in research studies.

Encapsulation of Lactobacillus plantarum ELB90 by electrospraying in a double emulsion (W1/O/W2) loaded alginate beads to improve the gastrointestinal survival and thermal stability

BACKGROUND

In the present study, the Lactobacillus plantarum ELB90 was encapsulated in double emulsion (W1/O/W2) loaded alginate beads (emulbeads) by electrospraying and compared with emulsion-free control beads. The viability of encapsulated and free cells was assessed by exposing them to thermal processing (65 °C for 30 min and 72 °C for 3 min) and simulated gastrointestinal conditions. The beads were characterized by optical, scanning electron, fluorescence, and confocal laser scanning microscopy, as well as Fourier transform infrared and gel strength analysis.

RESULTS

After the intestinal stage of digestion, the survival rate of free bacteria was 38% [3.70 log colony-forming units (CFU) g^-1 ], only increased to 43% and 53% for bare and chitosan-coated control beads, and it elevated the survival rate to 75% and 84% (8.70 log CFU g^-1 ) for bare and chitosan-coated emulbeads, respectively. The presence of inulin increased gastrointestinal viability only in uncoated emulbeads. The bacteria loaded in emulbeads retained greater viability (5.90-6.90 log CFU g^-1 ) against thermal treatment, compared to control beads (2.07-4.10 log CFU g^-1 ) and free bacteria (2.57-3.11 log CFU mL^-1 ). Encapsulation of L. plantarum ELB90 only in emulsion-free beads may not be appropriate for providing thermal stability. Inulin addition and chitosan-coating of the beads increased the size, and emulbeads presented smoother surfaces compared to emulsion-free beads.

CONCLUSION

The contribution of a double emulsion into the gel matrix of electrosprayed alginate beads exhibited enhanced protection for probiotic bacteria that could be useful for the development of functional foods. © 2023 Society of Chemical Industry.

Systematic Review on the Metabolic Interest of Glucosinolates and Their Bioactive Derivatives for Human Health

In the last decade, most of the evidence on the clinical benefits of including cruciferous foods in the diet has been focused on the content of glucosinolates (GSL) and their corresponding isothiocyanates (ITC), and mercapturic acid pathway metabolites, based on their capacity to modulate clinical, biochemical, and molecular parameters. The present systematic review summarizes findings of human studies regarding the metabolism and bioavailability of GSL and ITC, providing a comprehensive analysis that will help guide future research studies and facilitate the consultation of the latest advances in this booming and less profusely researched area of GSL for food and health. The literature search was carried out in Scopus, PubMed and the Web of Science, under the criteria of including publications centered on human subjects and the use of Brassicaceae foods in different formulations (including extracts, beverages, and tablets), as significant sources of bioactive compounds, in different types of subjects, and against certain diseases. Twenty-eight human intervention studies met inclusion criteria, which were classified into three groups depending on the dietary source. This review summarizes recent studies that provided interesting contributions, but also uncovered the many potential venues for future research on the benefits of consuming cruciferous foods in our health and well-being. The research will continue to support the inclusion of GSL-rich foods and products for multiple preventive and active programs in nutrition and well-being.

Effect of gelation technique on lipid digestibility of emulsion-loaded alginate microparticles: a systematic review and meta-analysis

Alginate microparticles fabricated via calcium gelation or layer-by-layer assembly are commonly used for encapsulating emulsions. In this study, the impact of these two gelation methods on the lipid digestibility of emulsions was reviewed through a systematic screening of relevant studies. From the literature search (Scopus, PubMed, and Web of Science databases), 604 records were screened and 25 articles were included in the analysis. The fold change of free fatty acid release rate at the end of in vitro digestion process between alginate-encapsulated emulsion and emulsions not encapsulated by alginate was calculated for calcium gelation (weighted mean of response ratio 0.64, 95% CI 0.54-0.75) and layer-by-layer assembly (weighted mean of response ratio 0.89, 95% CI 0.81-0.98). Alginate-calcium hydrogels showed stronger inhibition of the extent of lipid digestion than alginate-coated multilayer emulsions. The structural and particle size differences between alginate microparticles acquired using different techniques may contribute to this phenomenon.

Controlled release of vascular endothelial growth factor (VEGF) in alginate and hyaluronic acid (ALG–HA) bead system to promote wound healing in punch-induced wound rat model

For wound healing, angiogenesis is one of the main therapeutic factors for recovering the injured tissue. To address this issue, a combination of two different polymers, alginate (ALG) and hyaluronic acid (HA) in an 80:20 ratio composition is used to optimize the bead system along with the 5 IU heparin (Hep) by crosslinking into calcium chloride (CaCl₂). Encapsulation of Vascular endothelial growth factor (VEGF) in the bead system shows delayed cumulative release in phosphate buffer saline (PBS). For in vitro studies, calf pulmonary artery endothelial (CPAE) cells showed biocompatibility. ALG-HA/VEGF150 improves endothelial Vascular cell adhesion protein 1 (VCAM1) and endothelial nitric oxide synthase (eNOS) expression markers in CPAE cells. In vivo evaluation of the bead system shows around 68% of wound closure 2 weeks post-implantation in 8 mm punch wound models. The treatment group shows decreased epithelial gap between the ends of the wound and neo-epidermal regeneration. ALG-HA/VEGF150 induced significant vascularization, collagen type-1 (Col-1) and fibronectin (FN) development in the in vivo models after 2 weeks of the implantation. Hence, ALG-HA/VEGF150 beads can be used to promote wound healing.

Preparation of macroporous rigid agarose microspheres by pre-crosslinking with cyclic anhydride

In this study, a new method for preparing macroporous rigid agarose microspheres was developed by one-step pre-crosslinking method with cyclic anhydride. Three different cyclic anhydrides, namely, maleic anhydride, succinic anhydride, and glutaric anhydride, were used to pre-crosslink agarose. The reaction temperature and the amount of cyclic anhydride in the pre-crosslinking process were optimized to endow agarose with stronger cross-linking. Under the optimal cross-linking condition, macroporous rigid agarose microspheres with homogeneous particle size were successfully obtained by adjusting emulsification method. Cryo-scanning electron microscopy was used to characterize the morphology of cross-linked agarose gel and microspheres. The addition of cyclic anhydride increased the gel aperture of cross-linked agarose microspheres, thereby making the macropores in the microspheres more dense and enhancing the mass transfer in the particles. Under low pressure, the cross-linked agarose microsphere column can effectively separate model proteins at linear flow rates three times higher than the agarose microsphere column. These results indicate that the developed agarose microspheres are a promising high-speed chromatographic medium.

Impact of internal aqueous phase gelation on in vitro lipid digestion of epigallocatechin gallate-loaded W1 /O/W2 double emulsions incorporated in alginate hydrogel beads

Our objective was to investigate if the internal aqueous phase gelation of Water-in-oil-in-water double emulsions encapsulated in alginate beads would affect their structural stability and lipid hydrolysis during in vitro digestion. Therefore, bioactive molecules such as (-)-epigallocatechin gallate were encapsulated into different types of delivery systems: original double emulsions (as control) and incorporated double emulsions (filled in alginate hydrogel beads), both with non-gelled or gelled internal aqueous phase by locust bean gum and κ-carrageenan. After 2 h of gastric digestion, the gelled original emulsions showed smaller mean droplet diameters and less coalescence during the in vitro simulated gastrointestinal digestion compared to the non-gelled original emulsions. For the incorporated emulsions, oil droplets released from beads aggregated under intestinal conditions, and the rate of lipolysis was delayed. Interestingly, the internal aqueous phase gelation also impacted the rate and cumulative amount of free fatty acids (FFA) released. PRACTICAL APPLICATION: The combination of incorporating (-)-epigallocatechin gallate-loaded double emulsions into the alginate hydrogel matrix and gelling the internal aqueous phase was a benefit to regulating the rate and extent of lipid digestion for specific applications in foods, such as to control blood lipid levels and appetite.

Updated design strategies for oral delivery systems: maximized bioefficacy of dietary bioactive compounds achieved by inducing proper digestive fate and sensory attributes

Interest in the application of dietary bioactive compounds (DBC) in healthcare and pharmaceutical industries has motivated researchers to develop functional delivery systems (FDS) aiming to maximize their bioefficacy. As the direct and indirect health benefiting effects of DBC are acknowledged, traditional design principle of FDS aiming at improving the bioavailability of intact DBC is challenged by the updated one, where the maximized bioefficacy of DBC delivered by FDS will be achieved via rationally absorbed at target sites with proper metabolism pathways. This article briefly summarized the absorption and metabolic fates of orally digested DBC along with their direct and indirect mechanisms to perform health benefiting effects. Current strategies in designing the next generation FDS with an emphasis on their modulation effects on the distribution portion between the upper and lower digestive tract, portal vein and lymphatic absorption, human digestive and gut microbiota enzymatic mediated metabolism were highlighted. Updated research progresses of FDS in adjusting sensory attributes of food end products and inducing synergistic effects rooting from matrix materials and co-delivered cargos were also discussed. Challenges as well as future perspectives concerning the precise nutrition and the critical role of delivery systems in dietary intervention were proposed.

Loadings of lycopene in emulsion and sodium alginate-K-carrageenan composite systems: Preparation, characterization, bioaccessibility, and kinetics

This research aims to prepare capsules emulsion using gallic acid (GA), dextran (DEX), bovine serum albumin (BSA), sodium alginate, and K-carrageenan (K-Car) as the biological delivery system of lycopene. The stability and bioaccessibility of lycopene were further improved through encapsulation of covalent complex of sodium alginate and K-Car. The molecular weight distribution and secondary structure of the conjugates were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and Fourier transform infrared spectroscopy (FTIR). The storage stability of the emulsion stabilized by conjugates was measured with Turbiscan stability index (TSI) and fluctuation of the particle size. The TSI value of ternary conjugates was 18.7 (37℃) with particle sizes ranging from 208 to 319 nm. Then, the changes of three-dimensional reticulate structures and physical properties of sodium alginate-K were analyzed by scanning electron microscopy (SEM) and TPA. The thermal stability of the sodium alginate-K-Car composite systems was increased compared with sodium alginate. The bioaccessibility of lycopene was significantly improved under the dual embedding of BSA-DEX-GA conjugate emulsion and sodium alginate-K-Car composite systems.

Microparticles coated with proteins in their natural state and in vitro gastrointestinal simulation

Abstract This study aimed to produce pectin and alginate microparticles by ionic gelation coated with different concentrations of bovine blood and egg white protein in their natural state. The coated microparticles were characterized, and their physical resistance and morphology were evaluated, as well as the released protein during in vitro gastrointestinal simulation. The highest protein adsorption (65.47%) was shown by pectin microparticles coated with bovine blood (10%), regardless of the protein type and concentration used. Likewise, higher amounts of adsorbed protein resulted as protein concentration increased, regardless of the type of microparticle. Nevertheless, the physical resistance of coated microparticles was affected more by the type of polysaccharide, being alginate microparticles more resistant. Adsorbed proteins on microparticles surface showed higher solubility values in vitro gastrointestinal simulation regardless of protein type. Bovine blood and egg white proteins in their natural state can be used as alternative coating materials for microparticles.

Effect of nanoemulsion-loaded hybrid biopolymeric hydrogel beads on the release kinetics, antioxidant potential and antibacterial activity of encapsulated curcumin

Nanoemulsion encapsulated in the hydrogel beads are important entrants for loading hydrophobic active ingredients for enhancing their bioavailability and biological activities relevant in the pharmaceutical, food and cosmetic industries. Herein, we report the formulation of curcumin-loaded nanoemulsion encapsulated in ionotropic hybrid hydrogel beads of alginate, chitosan, gelatin and polyethylene oxide for effective delivery of curcumin. The release behaviour in simulated gastric and intestinal fluids (SGF and SIF) at 37 °C showed faster release in SGF which could be explained on the basis of mesh size, the extent of hydration and the complexation of the curcumin with the Ca2+ ions present within the hydrogel network. The free radical scavenging and antibacterial activities of the released curcumin in SGF were significantly greater than in SIF. This study shows promises of such hybrid systems, ignored so far, for proper encapsulation, protection and delivery of curcumin for the development of functional foods and pharmaceutics. The high structural stability of these nanoemulsion carriers and their effective delivery of curcumin provide a novel and tailored formulation out of existing polymers with plethora of advantages for oral drug delivery. Moreover, this study opens new door for different possibilities to improve the physicochemical characteristics and delivery of bioactive molecules like curcumin.

Sodium alginate/soybean protein-epigallocatechin-3-gallate conjugate hydrogel beads: evaluation of structural, physical, and functional properties

Sodium alginate (SA) hydrogel beads have been extensively studied as delivery systems for bioactive compounds. Key challenges include overcoming the highly porous and poor emulsifying properties of SA hydrogels. Herein, soy protein isolate (SPI) was modified by covalent and noncovalent conjugation with epigallocatechin-3-gallate (EGCG), followed by complexation with SA to change the SA structure and fabricate hydrogel beads with low porosities. Microencapsulation beads were fabricated from SA-, SA/SPI-, and SA/SPI-modified EGCG complexes with a corn oil/quercetin mixture core. After the covalent and noncovalent SPI-modified EGCG complexes were combined with SA, the OH stretching vibration shifted, indicating that hydrogen bonds formed between the protein and SA, and the crystal structure of SA was destroyed. To achieve crosslinking, the beads were injected into a CaCl₂ solution, whereby Ca²⁺ ions replaced the Na⁺ ions in SA. Meanwhile, the addition of covalent and noncovalent SPI-modified EGCG complexes promoted the binding capacity of Ca²⁺ and SA. All hydrogel beads possessed open-cell microstructures with interconnecting pores. The SA/SPI-modified EGCG hydrogel beads exhibited smoother surfaces, thicker shells, and lower porosity than the SA hydrogel beads. Moreover, they exhibited significantly higher antioxidant activities. During digestion, all types of hydrogel bead maintained their structure, and only a small part of the encapsulated oil and quercetin was digested in the upper part of the gastrointestinal tract. In short, the formation mechanism of hydrogel beads was clarified, and hydrogel beads with low porosity and high antioxidation activities were successfully fabricated.

Plant-Based Colloidal Delivery Systems for Bioactives

The supplementation of plant-based foods and beverages with bioactive agents may be an important strategy for increasing human healthiness. Numerous kinds of colloidal delivery systems have been developed to encapsulate bioactives with the goal of improving their water dispersibility, chemical stability, and bioavailability. In this review, we focus on colloidal delivery systems assembled entirely from plant-based ingredients, such as lipids, proteins, polysaccharides, phospholipids, and surfactants isolated from botanical sources. In particular, the utilization of these ingredients to create plant-based nanoemulsions, nanoliposomes, nanoparticles, and microgels is covered. The utilization of these delivery systems to encapsulate, protect, and release various kinds of bioactives is highlighted, including oil-soluble vitamins (like vitamin D), ω-3 oils, carotenoids (vitamin A precursors), curcuminoids, and polyphenols. The functionality of these delivery systems can be tailored to specific applications by careful selection of ingredients and processing operations, as this enables the composition, size, shape, internal structure, surface chemistry, and electrical characteristics of the colloidal particles to be controlled. The plant-based delivery systems discussed in this article may be useful for introducing active ingredients into the next generation of plant-based foods, meat, seafood, milk, and egg analogs. Nevertheless, there is still a need to systematically compare the functional performance of different delivery systems for specific applications to establish the most appropriate one. In addition, there is a need to test their efficacy at delivering bioavailable forms of bioactives using in vivo studies.

Dynamics of Microbial Shedding in Market Pigs during Fasting and the Influence of Alginate Hydrogel Bead Supplementation during Transportation

The shedding of foodborne pathogenic bacteria by food-animals can be affected by multiple factors, such as animal health, diet, stress, and environmental conditions. The practices that come with transport involve fasting, handling, mixing with unfamiliar pigs, and fluctuating temperatures. These practices, especially fasting and transport, can increase the microbial load in the feces of animals. The use of alginate hydrogels is a novel delivery system that can be a potential food safety intervention during transport to induce satiety and provide electrolytes to the animal’s system. This study sought to observe microbial shedding as affected by fasting and hydrogel bead supplementation during transport. Sixty market pigs were subjected to a 12 h fasting period and an additional 4 h transport period, in which a treatment group was fed hydrogel beads and a control group was not. Sampling points were before fast (BF), before transport (BT), and after transport (AT). Fecal samples were collected from every animal at each sampling point. Results from this study showed a significant increase in the concentrations of both Enterobacteriaceae and Escherichia coli between the before fast (BF) and after transport (AT) sampling points. However, no difference (p > 0.05) was found between the treatment (hydrogel) and control (no hydrogel) during transport. Moreover, no significant difference was found in the prevalence of Salmonella and E. coli O157:H7 at the three different sampling points, or between the treatment and control groups.

Biophysical insights into modulating lipid digestion in food emulsions

During the last decade, major scientific advances on understanding the mechanisms of lipid digestion and metabolism have been made, with a view to addressing health issues (such as obesity) associated with overconsumption of lipid-rich and sucrose-rich foods. As lipids in common foods exist in the form of emulsions, the structuring of emulsions has been one the main strategies for controlling the rate of lipid digestion and absorption, at least from a colloid science viewpoint. Modulating the kinetics of lipid digestion and absorption offers interesting possibilities for developing foods that can provide control of postprandial lipaemia and control the release of lipophilic compounds. Food emulsions can be designed to achieve considerable differences in the kinetics of lipid digestion but most research has been applied to relatively simple model systems and in in vitro digestion models. Further research to translate this knowledge into more complex food systems and to validate the results in human studies is required. One promising approach to delay/control lipid digestion is to alter the stomach emptying rate of lipids, which is largely affected by interactions of emulsion droplets with the food matrices. Food matrices with different responses to the gastric environment and with different interactions between oil droplets and the food matrix can be designed to influence lipid digestion. This review focuses on key scientific advances made during the last decade on understanding the physicochemical and structural modifications of emulsified lipids, mainly from a biophysical science perspective. The review specifically explores different approaches by which the structure and stability of emulsions may be altered to achieve specific lipid digestion kinetics.

Co-encapsulation of (-)-epigallocatechin-3-gallate and quercetin in double emulsion hydrogel beads: Microstructures, functional properties, and digestion behaviors

Co-loaded (-)-epigallocatechin-3-gallate (EGCG) and quercetin double emulsions and hydrogel beads were prepared, and their structure, functions, and digestion characteristics were investigated. The double emulsion particles were adsorbed by the cross-linked chains of the hydrogel beads. The encapsulation efficiencies of EGCG and quercetin within the hydrogel beads were higher than those within the double emulsion, while the antioxidant activities of the double emulsions were higher than those of the hydrogel beads. A lower amount of free fatty acids (FFAs) was released from the hydrogel beads than that released from the double emulsions. The bioavailability of EGCG was higher in the hydrogel beads than those in the double emulsions, while the quercetin bioavailability was not significantly different expect for the ratio of 3:7. The hydrogel beads remained intact in the stomach; however, numerous oil spills occurred in the small intestine. These data may improve double-emulsion-based delivery systems for controlled lipolysis and the release of co-encapsulated hydrophilic and lipophilic bioactive compounds.

Emulsion, hydrogel and emulgel systems and novel applications in cannabinoid delivery: a review

Emulsions, hydrogels and emulgels have attracted a high interest as tools for the delivery of poorly soluble hydrophobic nutraceuticals by enhancing their stability and bioavailability. This review provides an overview of these delivery systems, their unique qualities and their interactions with the human gastrointestinal system. The modulation of the various delivery systems to enhance the bioavailability and modify the release profile of bioactive encapsulates is highlighted. The application of the delivery systems in the delivery of cannabinoids is also discussed. With the recent increase of cannabis legalization across North America, there is much interest in developing cannabis edibles which can provide a consistent dose of cannabinoids per portion with a rapid time of onset. Indeed, the long time of onset of psychoactive effects and varied metabolic responses to these products result in a high risk of severe intoxication due to overconsumption. Sophisticated emulsion or hydrogel-based delivery systems are one potential tool to achieve this goal. To date, there is a lack of evidence linking specific classes of delivery systems with their pharmacokinetic profiles in humans. More research is needed to directly compare different classes of delivery systems for the gastrointestinal delivery of cannabinoids.

Nanocomposite sponges for enhancing intestinal residence time following oral administration

In this work, nanocomposites that combine mucopenetrating and mucoadhesive properties in a single system are proposed as innovative strategy to increase drug residence time in the intestine following oral administration. To this aim, novel mucoadhesive chitosan (CH) sponges loaded with mucopenetrating nanoemulsions (NE) were developed via freeze-casting technique. The NE mucopenetration ability was determined studying the surface affinity and thermodynamic binding of the nanosystem with mucins. The ability of nanoparticles to penetrate across a preformed mucins layer was validated by 3D-time laps Confocal Laser Scanning Microscopy imaging. Microscopy observations (Scanning Electron Microscopy and Optical Microscopy) showed that NE participated in the structure of the sponge affecting its stability and in vitro release kinetics. When incubated with HCT 116 and Caco-2 cell lines, the NE proved to be cytocompatible over a wide concentration range. Finally, the in vivo biodistribution of the nanocomposite was evaluated after oral gavage in healthy mice. The intestinal retention of NE was highly enhanced when loaded in the sponge compared to the NE suspension. Overall, our results demonstrated that the developed nanocomposite sponge is a promising system for sustained drug intestinal delivery.

Microencapsulation of growth factors by microfluidic system

The encapsulation of growth factors is an important component of tissue engineer- ing. Using microspheres is a convenient approach in which the dose of factors can be regulated by increasing or decreasing the number of encapsulated microspheres. Moreover, microspheres offer the possibility of delivering the growth factors directly to the target site. However, the fabrication of microspheres by traditional emulsion methods is largely variable due to the experimental procedure. We have developed a protocol using a commercially available microfluidic system that allows formation of tunable particle-size droplets loaded with growth factors. The methodology includes a guide for preparing an alginate-growth factors solution followed by the specific set-up needed for using the microfluidic system to form the microspheres. The pro- cedure also includes a unique post-crosslinking process without pH modification. These methods allow the preservation of integrity and bioactivity of the growth factors tested (BMP-6 and TGFβ -3) and their subsequent sustained delivery.•The protocol can be tuned to form particles of various sizes.•The gentle post-crosslinking process allows conformational integrity of various bioactive molecules.

Amelioration of the stability of polyunsaturated fatty acids and bioactive enriched vegetable oil: blending, encapsulation, and its application

Lipid oxidation in vegetable oils is the primary concern for food technologists. Modification of oils like hydrogenation, fractionation, inter-esterification, and blending are followed to improve nutritional quality. Blending non-conventional/conventional vegetable oils to obtain a synergistic oil mixture is commonly practiced in the food industry to enhance the nutritional characteristics and stability of oil at an affordable price. Microencapsulation of these oils provides a functional barrier of core and coating material from the adverse environmental conditions, thereby enhancing the oxidative stability, thermo-stability, shelf-life, and biological activity of oils. Microencapsulation of oils has been conducted and commercialized by employing different conventional methods including emulsification, spray-drying, freeze-drying, coacervation, and melt-extrusion compared with new, improved methods like microwave drying, spray chilling, and co-extrusion. The microencapsulated oil emulsion can be either dried to easy-to-handle solids/microcapsules, converted into soft solids, or enclosed in a gel-like matrix, increasing the shelf-life of the liquid oil. The omega-rich microcapsules have a wide application in confectionery, dairy, ice-cream, and pharmaceutical industries. This review summarizes recent developments in blending and microencapsulation technologies in improving the stability and nutritional value of edible oils.

Alginate: From Food Industry to Biomedical Applications and Management of Metabolic Disorders

Initially used extensively as an additive and ingredient in the food industry, alginate has become an important compound for a wide range of industries and applications, such as the medical, pharmaceutical and cosmetics sectors. In the food industry, alginate has been used to coat fruits and vegetables, as a microbial and viral protection product, and as a gelling, thickening, stabilizing or emulsifying agent. Its biocompatibility, biodegradability, nontoxicity and the possibility of it being used in quantum satis doses prompted scientists to explore new properties for alginate usage. Thus, the use of alginate has been expanded so as to be directed towards the pharmaceutical and biomedical industries, where studies have shown that it can be used successfully as biomaterial for wound, hydrogel, and aerogel dressings, among others. Furthermore, the ability to encapsulate natural substances has led to the possibility of using alginate as a drug coating and drug delivery agent, including the encapsulation of probiotics. This is important considering the fact that, until recently, encapsulation and coating agents used in the pharmaceutical industry were limited to the use of lactose, a potentially allergenic agent or gelatin. Obtained at a relatively low cost from marine brown algae, this hydrocolloid can also be used as a potential tool in the management of diabetes, not only as an insulin delivery agent but also due to its ability to improve insulin resistance, attenuate chronic inflammation and decrease oxidative stress. In addition, alginate has been recognized as a potential weight loss treatment, as alginate supplementation has been used as an adjunct treatment to energy restriction, to enhance satiety and improve weight loss in obese individuals. Thus, alginate holds the promise of an effective product used in the food industry as well as in the management of metabolic disorders such as diabetes and obesity. This review highlights recent research advances on the characteristics of alginate and brings to the forefront the beneficial aspects of using alginate, from the food industry to the biomedical field.

Nanoemulsion-Loaded Capsules for Controlled Delivery of Lipophilic Active Ingredients

Nanoemulsions have become ideal candidates for loading hydrophobic active ingredients and enhancing their bioavailability in the pharmaceutical, food, and cosmetic industries. However, the lack of versatile carrier platforms for nanoemulsions hinders advanced control over their release behavior. In this work, a method is developed to encapsulate nanoemulsions in alginate capsules for the controlled delivery of lipophilic active ingredients. Functional nanoemulsions loaded with active ingredients and calcium ions are first prepared, followed by encapsulation inside alginate shells. The intrinsically high viscosity of the nanoemulsions ensures the formation of spherical capsules and high encapsulation efficiency during the synthesis. Moreover, a facile approach is developed to measure the nanoemulsion release profile from capsules through UV-vis measurement without an additional extraction step. A quantitative analysis of the release profiles shows that the capsule systems possess a tunable, delayed-burst release. The encapsulation methodology is generalized to other active ingredients, oil phases, nanodroplet sizes, and chemically crosslinked inner hydrogel cores. Overall, the capsule systems provide promising platforms for various functional nanoemulsion formulations.

Encapsulation of Black Seed Oil in Alginate Beads as a pH-Sensitive Carrier for Intestine-Targeted Drug Delivery: In Vitro, In Vivo and Ex Vivo Study

Black seed oil (BSO) has been used for various therapeutic purposes around the world since ancient eras. It is one of the most prominent oils used in nutraceutical formulations and daily consumption for its significant therapeutic value is common phenomena. The main aim of this study was to develop alginate-BSO beads as a controlled release system designed to control drug release in the gastrointestinal tract (GIT). Electrospray technology facilitates formulation of small and uniform beads with higher diffusion and swelling rates resulting in process performance improvement. The effect of different formulation and process variables was evaluated on the internal and external bead morphology, size, shape, encapsulation efficiency, swelling rate, in vitro drug release, release mechanism, ex vivo mucoadhesive strength and gastrointestinal tract qualitative and quantitative distribution. All the formulated beads showed small sizes of 0.58 ± 0.01 mm (F8) and spherical shape of 0.03 ± 0.00 mm. The coefficient of weight variation (%) ranged from 1.37 (F8) to 3.93 (F5) ng. All formulations (F1–F9) were studied in vitro for release characteristics and swelling behaviour, then the release data were fitted to various equations to determine the exponent (ns), swelling kinetic constant (ks), swelling rate (%/h), correlation coefficient (r²) and release kinetic mechanism. The oil encapsulation efficiency was almost complete at 90.13% ± 0.93% in dried beads. The maximum bead swelling rate showed 982.23 (F8, r² = 0.996) in pH 6.8 and the drug release exceeded 90% in simulated gastrointestinal fluid (pH 6.8). Moreover, the beads were well distributed throughout various parts of the intestine. This designed formulation could possibly be advantageous in terms of increased bioavailability and targeted drug delivery to the intestine region and thus may find applications in some diseases like irritable bowel syndrome.

Lipid Oxidation in Emulsions Fortified with Iron-Loaded Alginate Beads

The potential use of iron-loaded alginate beads to fortify oil-in-water (O/W) emulsions was studied. Iron-loaded alginate beads with different sizes (0.65, 0.84, 1.5 and 2 mm) were produced by ionic gelation with calcium chloride, leading to 81% encapsulation efficiency (EE) of ferrous sulfate. These beads were added to O/W emulsions to investigate their effect on lipid oxidation. The use of iron-loaded alginate beads inhibited lipid oxidation in emulsions, compared to a control emulsion with the same concentration of free ferrous sulfate in the continuous phase, but did not totally prevent it. Results obtained with scanning electron microscopy and energy dispersive X-ray spectroscopy (EDX) analysis showed that some reactive iron was present at the surface of the beads. Oxidation of the lipid droplets was slightly higher for smaller alginate beads, suggesting that the reaction could be linked to the total bead surface. When covering iron-loaded beads with an extra layer of alginate, lipid oxidation was inhibited, which confirmed the role of reactive surface-bound iron. This study shows that the location of iron within the encapsulates plays a crucial role in the chemical stability of fortified foods and should be taken as a starting point in the design of iron-fortified food products.