Fabrication and characterization of novel high-performance fluorinated polyimides with xanthene pendent architecture: Study of thermal, photophysical, antibacterial and heavy metal ion adsorption behavior

New fluorinated polyimides based on 1,2-bis(4-aminophenyl)-4,5-bis(4-trifluoromethylphenyl)-1H-imidazole

A new aromatic unsymmetrical diamine containing imidazolyl and trifluoromethyl groups, 1,2-bis(4-aminophenyl)-4,5-bis(4-trifluoromethylphenyl)-1H-imidazole was synthesized. A series of novel fluorinated polyimides (PIs) were prepared by polycondensation of this diamine monomer with various aromatic dianhydrides via one-step process. The resulting PIs bearing inherent viscosities of 0.45–0.61 dL/g were amorphous and readily soluble in organic polar solvents such as NMP, DMF, DMAc, THF, and CHCl3. These new PIs exhibited good thermal stability with 10% weight loss temperatures of 530–560°C and char yields of 61–65% at 800°C in nitrogen, as well as good flame retardancy with limited oxygen index value of 40.6–42.8, and outstanding hydrophobicity with the contact angle of 85.2–93.5°. Meanwhile, all the obtained PIs exhibited low water uptake of 0.30–0.53%, strong UV-vis absorption in the range of 267–310 nm in DMF solution, and their films presented high optical transparency with a cut-off wavelength in the 355–392 nm range. Except for the PI film derived from pyromellitic dianhydride, the other PI films had the tensile strength in the range of 53.2–74.1 MPa, elongation at breakage of 6–15%, and tensile modulus of 1.0–1.5 GPa, respectively.

Preparation of porous fluorinated polyimide separator for lithium-ion batteries by non-solvent induced phase separation process

A series of novel porous fluorinated polyimide (FPI) separators containing trifluoromethyl group (–CF3) were prepared by the non-solvent induced phase separation (NIPS) strategy. The prepared FPI separator with 60% molar content (fluorinated dianhydride: non-fluorinated dianhydride: diamine = 60: 40: 100) of fluorinated groups (FPI-60%) could stably exist in the electrolyte as a LIBs separator. The resultant FPI-60% separator possesses high thermal stability with the Tg of 289.4°C and exhibits no shrinkage even at 200°C. The morphologies of the FPI-60% separators were adjusted by introducing small molecular non-solvent additives-ethanol, and the FPI-60% separators present the spongy-like and interconnected structure with different porosity as the amount of ethanol changed from 1 wt% to 10 wt%. The FPI-60% separators display excellent electrolyte uptake with 170%–200% and the ionic conductive could reach 1.17 mS/cm which is four times approximately than that of the PP separator. The lithium-ion batteries (LIBs) using FPI-60% separators with 10 wt% ethanol added show better rate capacities (102.8 mAh/g, 70.8 mAh/g of PI-10 and PP separator at 2 C, respectively) and the capacity retention rate is 93.2% after 50 cycles. The results prove that the porous FPI separator is a promising candidate for high-performance LIBs.

Design and fabrication of photoactive imidazole-based poly(ether-imide)s and a polyimide/HBP-modified SiO2 composite: toward high heat-resistance, antimicrobial activity and removal of heavy metal ions

This article describes the synthesis and properties of novel imidazole-based aromatic polyimides (PIs) containing bulky groups from direct polycondensation of two diamines with 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA) and (hexafluoroisopropylidene)diphthalic anhydride (6FDA). The structure–property relationship of the prepared samples was fully determined via FT-IR, ¹H and ¹³C NMR and elemental analysis (CHN) techniques. The inherent viscosity values of the polyimides ranged from 0.51 to 0.73 dL g⁻¹. These PIs showed glass transition temperatures ranging from 273 to 306 °C, and 10% mass loss temperatures within the range of 478–504 °C in a N₂ atmosphere. High transparency with a UV-visible absorption cut-off wavelength was found to range between 285 and 300 nm. Good antimicrobial activity can be correlated with the presence of xanthene and imidazole units into the main structure of PIs. Next, SiO₂ nanoparticles as inorganic nanoparticles were added to one of the synthesized polyimides (BTDA-PIb), causing changes in the attributes of both the nanoparticles and PI. The data obtained from examining the properties of the prepared BTDA-PIb/HBP@SiO₂ demonstrated increased heat resistance, photoluminescence intensity, and antimicrobial inhibition compared to pure PI. Also, in this article, the polymeric samples as adsorbents were evaluated for extraction of heavy metal ions (Hg²⁺ and Co²⁺) from water sources.

Novel thermostable, photoactive, and solvable poly(ether-imide)s containing imidazole-based pendant groups and a BTDA-PIb/HBP@SiO₂ composite were synthesized and used due to their antimicrobial activity and as an adsorbent to remove heavy metal ions.

The effects of long and bulky aromatic pendent groups with flexible linkages on the thermal, mechanical and electrical properties of the polyimides and their nanocomposites with functionalized silica

A novel diamine bis(4-aminophenyl)bis{3,4[(4-(8-quinolyloxymethyl carbonyl)]}methane, containing two long/bulky aromatic pendent chains was synthesized by incorporating aromatic and hetero aromatic groups with flexible linkages. Flexible, stretchable, thermally stable and processable polyimides were prepared by reacting this newly synthesized diamine with commercial tetracarboxylic acid dianhydrides like 3,3',4,4'-benzophenone tetra carboxylic acid dianhydride (BTDA) and 4,4'-(4,4'-isopropylidenediphenoxy)diphthalic Anhydride (BPADA). Nanocomposites of polyimides were prepared using aromatic amine functionalized silica as a filler by solution casting method. The current work investigates the effects of incorporating long/bulky aromatic side chains and flexible linkages on the thermal, mechanical, electrical and optical properties of the polyimides and nanocomposites. The polyimides showed good thermal stability (T 10% = 364 & 388), high flame resistance, low glass transition temperatures (T g = 130 °C & 156 °C), very low dielectric constants (2.5 & 2.8 at 1 MHz) and good optical transparency. The neat polyimides displayed good elongation at break (133-155%) but possessed low tensile strength. The chemically imidized polyimides showed good solubility in low and high boiling solvents. Nanocomposites of polyimides based on aromatic amine functionalized silica exhibited enhanced properties with T 10% values varying between 409-482 °C, T g between 165-280 °C and higher dielectric constants (3-5.7 at 1 MHz).

Xanthenes in Medicinal Chemistry - Synthetic strategies and biological activities

BACKGROUND

Xanthenes are a special class of oxygen-incorporating tricyclic compounds. Structurally related to xanthones, the presence of different substituents in position 9 strongly influences their physical and chemical properties, as well as their biological applications. This review explores the synthetic methodologies developed to obtain 9H-xanthene, 9-hydroxyxanthene and xanthene-9-carboxylic acid, as well as respective derivatives, from simple starting materials or through modification of related structures. Azaxanthenes, bioisosteres of xanthenes, are also explored. Efficiency, safety, ecological impact and applicability of the described synthetic methodologies are discussed. Synthesis of multi-functionalized derivatives with drug-likeness properties are also reported and their activities explored. Synthetic methodologies for obtaining (aza)xanthenes from simple building blocks are available, and electrochemical and/or metal free procedures recently developed arise as greener and efficient methodologies. Nonetheless, the synthesis of xanthenes through the modification of the carbonyl in position 9 of xanthones represents the most straightforward procedure to easily obtain a variety of (aza)xanthenes. (Aza)xanthene derivatives displayed biological activity as neuroprotector, antitumor, antimicrobial, among others, proving the versatility of this nucleus for different biological applications. However, in some cases their chemical structures suggest a lack of pharmacokinetic properties being associated with safety concerns, which should be overcome if intended for clinical evaluation.

Novel poly(imide-ether)s based on xanthene and a corresponding composite reinforced with a GO grafted hyperbranched polymer: fabrication, characterization, and thermal, photophysical, antibacterial and chromium adsorption properties

High-performance polyimides (PIs) with ether linkages and trifluoromethyl (–CF₃) groups based on xanthene were designed and synthesized via a polycondensation reaction of novel diamine monomers with available aromatic dianhydrides.

Photoconductive polyimides derived from a novel imidazole-containing diamine

A new diamine containing an imidazole structure, 4,4′-(4,5-diphenyl-1H-imidazole-1,2-diyl)dianiline (DIMA), was synthesized to prepare photoconductive polyimides (PIs) with four types of dianhydrides such as 3,3′,4,4′-biphenyltetracarboxylic dianhydride, 4,4′-oxyduphthalic anhydride, 4,4′-(hexafluoroisopropylidene) diphthalic anhydride, and cyclobutane-1,2,3,4,-tetracarboxylic dianhydride, based on the fact that the imidazole ring is a useful n-type block with high electron-donating property and good thermal stability. The imidazole-containing diamine possesses high electron-donating properties due to the lone pair electrons at nitrogen, which affords a high hole-transport property. All the PIs prepared from DIMA were amorphous due to the large side group and kink structure of the diamine, optically transparent (transmittances of 92–98% at 450 nm), and exhibited high thermal stability (10% weight loss temperatures ranged 453–558°C).

High-performance polyimides based on pyridine and xanthene pendant groups; synthesis, characterization, photoactivity, thermal, antibacterial, and Cr(VI) ion adsorption properties

A group of new polyimides (PIs) containing xanthene bulky groups and heterocyclic pyridine ring were synthesized by polycondensation reaction by using new symmetric and asymmetric diamines with available dianhydrides. The prepared diamines and PIs were characterized by Fourier transform infrared, elemental analysis, and proton nuclear magnetic resonance spectroscopy and carbon nuclear magnetic resonance spectroscopy. The PIs have desirable solubility in common aprotic solvents like dimethyl sulfoxide, N-methyl-2-pyrrolidone, dimethylacetamide, and pyridine as a less polar solvent. The PIs with inherent viscosities in the range of 0.51–0.72 dL/g were amorphous in nature, showed glass transition temperatures ( Tgs) of about 270–300°C, and 10% weight loss at temperatures 384–443°C. They showed fluorescence emission (quantum yield 7–12%) due to the presence of xanthene and pyridine groups in their structure. The prepared PIs showed tensile strength of 81–91 MPa with elongation at break of 19–23%. The antibacterial properties of the PIs against Gram negative and Gram positive bacteria and funguses were investigated. Also, a membrane of PI prepared by electrospinning method was used for the removal of different concentrations of Cr(VI) from aqueous solutions.

Design and synthesis of high heat-resistant, soluble, and hydrophobic fluorinated polyimides containing pyridine and trifluoromethylthiophenyl units

In this study, a novel diamine monomer, 4-(4-trifluoromethylthiophenyl)-2,6-bis(4-aminophenyl)pyridine (FTPAP) was synthesized through two-step reaction from 4-trifluoromethylthiobenzaldehyde and 4-nitroacetophenone as raw materials, and then the structure of FTPAP was characterized by Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance, and mass spectrometry. A series of fluorinated polyimides were prepared from FTPAP with five commercial dianhydrides, namely, pyromellitic dianhydride, biphenyl tetracarboxylic dianhydride, oxydiphtahalic anhydride, benzophenone tetracarboxylic dianhydride, and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride. The structure and performance of the fluorinated polymers were fully characterized by FTIR, differential scanning calorimetry, thermogravimetric analysis, and wide-angle X-ray diffraction (WAXD). The inherent viscosity of polymers ranged from 0.41 to 1.45 dL g−1. These polymers displayed good solubility in polar aprotic solvents, such as N, N-dimethylformamide, N, N-dimethylacetamide, dimethyl sulfoxide, and N-methyl-2-pyrrolidone, at room temperature or on heating. Furthermore, they exhibited outstanding thermal stability with glass transition temperatures beyond 305°C, and the temperature of 10% weight loss was in the range of 514–573°C with more than 56% residue at 800°C under nitrogen. Moreover, they showed high optical transparency with the cutoff wavelengths in the range of 385–457 nm and excellent hydrophobic property with contact angle in the range of 82.8–97.6°. In addition, the results of WAXD indicated that all of the polymers presented amorphous structure.