Polyphenol-rich extract from murta leaves on rheological properties of film-forming solutions based on different hydrocolloid blends

Transforming Agro-Industrial Waste into Bioplastic Coating Films

Addressing the environmental impact of agro-industrial waste, this study explores the transformation of banana, potato, and orange peels into bioplastics suitable for thin coating films. We prepared six extracts at 100 g/L, encompassing individual (banana peel, BP; orange peel, OP; and potato peel, PP) and combined [BP/OP, BP/PP, and BP/OP/PP] formulations, with yeast mold (YM) medium serving as the control. Utilizing the spin-coating method, we applied 1 mL of each sample at 1000 rpm for 1 min to create the films. Notably, the OP extract demonstrated a twofold increase in bioplastic yield (860.33 mg/L) compared to the yields of BP (391.43 mg/L), PP (357.67 mg/L), BP/OP (469.40 mg/L), BP/PP (382.50 mg/L), BP/OP/PP (272.67 mg/L), and YM (416.33 mg/L) extracts. Atomic force microscopy analysis of the film surfaces revealed a roughness under 8 nm, with the OP extract recording the highest at 7.0275 nm, whereas the BP/OP mixture exhibited the lowest roughness at 0.2067 nm and also formed the thinnest film at 6.5 nm. With R2 trend values exceeding 0.9950, the films exhibited water vapor permeability values ranging from 3.05 × 10-3 to 4.44 × 10-3, with the OP film being the least permeable and the BP/PP films the most permeable. The OP film demonstrated the lowest solubility in both water and ethanol with values of 64.71 and 1.05%, respectively. The solubilities of all films were above 60% in water and below 4% in ethanol. Furthermore, the films exhibited antimicrobial efficacy against both Gram-positive and Gram-negative bacteria. Our findings confirm the potential of utilizing banana, orange, and potato peels as viable substrates for eco-friendly bioplastics in thin-film applications.

Waste to value: Enhancing xanthan gum hydrogel with wine lees extract for optimal performance

The current study investigated the potential of utilizing wine lees extract (WLE) from red wine to enhance the sustainability and cost-effectiveness of xanthan gum (XG). A novel hydrogel system was successfully generated by cross-linking WLE and XG. Response surface methodology (RSM) was used to thoroughly analyze the characteristics of this novel hydrogel to understand its behavior and possible applications. Consistency index (K), flow behavior index (n), water holding capacity (%), and oil binding capacity (%) of the cross-linked hydrogels were optimized, and the best formulation was determined to be 0.81 % XG + 0.67 % WLE and crosslink temperature of 47 °C. The addition of WLE (0-1 % w/v) to different concentrations of XG (0-1 % w/v) was found to have a notable impact on the rheological properties, but changes in cross-link temperature (45-65 °C) did not have a significant effect. The activation energy was increased by incorporating WLE at XG concentration above 0.5 %, indicating a more robust and stable structure. FTIR and SEM analyses confirmed the chemical bonding structure of the optimum hydrogel. Incorporating WLE could significantly improve the functional properties of XG hydrogels, allowing the development of healthier product formulations.

High-strength, antifogging and antibacterial ZnO/carboxymethyl starch/chitosan film with unique "Steel Wire Mesh" structure for strawberry preservation

In this work, a multifunctional preservative film of ZnO/carboxymethyl starch/chitosan (ZnO/CMS/CS) with the unique "Steel Wire Mesh" structure is fabricated by the chemical crosslinked of ZnO NPs, CMS and CS. Unlike traditional nano-filled polymer film, the formation of the "Steel Wire Mesh" structure of ZnO/CMS/CS film is based on the synergistic effect of ZnO NPs filled CMS/CS and the coordination crosslinked between CMS/CS and Zn2+ derived from ZnO NPs. Thanks to the "Steel Wire Mesh" structure, the tensile strength and water vapor barrier of 2.5ZnO/10CMS/CS film are 2.47 and 1.73 times than that of CS film, respectively. Furthermore, the transmittance of 2.5ZnO/10CMS/CS film during antifogging test is close to 89 %, confirming its excellent antifogging effects. And the 2.5ZnO/10CMS/CS film also exhibits excellent long-acting antibacterial activity (up to 202 h), so it can maintain the freshness and appearance of strawberries at least 5 days. More importantly, the 2.5ZnO/10CMS/CS film is sensitive to humidity changes, which achieves real-time humidity monitoring of the fruit storage environment. Note that the preparation method of the film is safe, simple and environmentally friendly, and its excellent degradation performance will not bring any problems of food safety and environmental pollution.

Composite optimization and characterization of dietary fiber-based edible packaging film reinforced by nanocellulose from grapefruit peel pomace

The development of edible packaging films was motivated due to resource waste and environmental damage caused by chemically produced plastic packaging. The development of edible packaging film based on grapefruit peel pomace dietary fiber has significant technological and functional potential because grapefruit processing waste is a potential source of high-quality dietary fiber. In this study, the first successful development of an edible packaging film based on dietary fiber using grapefruit soluble dietary fiber (GSDF) from grapefruit peel pomace as a substrate and nanocellulose (GNCC) as a filler was developed. Principal component analysis, membership function synthesis, and response surface methods were used to determine the optimal process to prepare the edible packaging films, and the impact of GNCC on this material was analyzed. The results showed that the overall performance score of the edible packaging film with 1 wt% GNCC was 0.764. The maximum pyrolysis temperature increased from 226.36 °C to 227.10 °C, the melting temperature (Tm) increased by 5.54 °C, the crystallinity increased by 2.95 %. The film solution exhibited non-Newtonian characteristics and a solid-like property. Our results showed that the edible packaging film developed from grapefruit peel pomace and dietary fiber could have several potential applications in the food packaging field.

Effects of Chitosan and Cellulose Derivatives on Sodium Carboxymethyl Cellulose-Based Films: A Study of Rheological Properties of Film-Forming Solutions

Bio-based packaging materials and efficient drug delivery systems have garnered attention in recent years. Among the soluble cellulose derivatives, carboxymethyl cellulose (CMC) stands out as a promising candidate due to its biocompatibility, biodegradability, and wide resources. However, CMC-based films have limited mechanical properties, which hinders their widespread application. This paper aims to address this issue by exploring the molecular interactions between CMC and various additives with different molecular structures, using the rheological method. The additives include O-carboxymethylated chitosan (O-CMCh), N-2-hydroxypropyl-3-trimethylammonium-O-carboxymethyl chitosan (HTCMCh), hydroxypropyltrimethyl ammonium chloride chitosan (HACC), cellulose nanocrystals (CNC), and cellulose nanofibers (CNF). By investigating the rheological properties of film-forming solutions, we aimed to elucidate the influencing mechanisms of the additives on CMC-based films at the molecular level. Various factors affecting rheological properties, such as molecular structure, additive concentration, and temperature, were examined. The results revealed that the interactions between CMC and the additives were dependent on the charge of the additives. Electrostatic interactions were observed for HACC and HTCMCh, while O-CMCh, CNC, and CNF primarily interacted through hydrogen bonds. Based on these rheological properties, several systems were selected to prepare the films, which exhibited excellent transparency, wettability, mechanical properties, biodegradability, and absence of cytotoxicity. The desirable characteristics of these selected films demonstrated the strong biocompatibility between CMC and chitosan and cellulose derivatives. This study offers insights into the preparation of CMC-based food packaging materials with specific properties.

Konjac glucomannan-dihydromyricetin complex improves viscosity and hydration capacity of konjac glucomannan as well as the thermal stability of dihydromyricetin

The nutritional benefits of soluble dietary fiber were mainly attributed to its viscosity and hydration capacity. This study was aimed to investigate the effects of the interaction between konjac glucomannan (KGM) and dihydromyricetin (DMY) on the viscosity and hydration capacity of KGM and the thermal stability of DMY. In contrary to most reports, the addition of DMY to KGM resulted in an increase of viscosity and hydration capacity determined via rheology and nuclear magnetic resonance spectroscopy characterization. Meanwhile the prototype retention of DMY in the presence of heating condition at 60 °C and 100 °C were improved. The radical scavenging capacity of DMY under heating condition was improved at 100 °C via the quantification of ABTS⁺ and DPPH. KGM-DMY complex was a non-covalent compound connected by hydrogen bonds which was characterized with particle size analyses, zeta potential analyses, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, and isothermal titration calorimetry. This study was beneficial to the development of polyphenol-enriched nutrition based on KGM, especially in the aspects of satiety, appetite regulation and glucose regulation.

The synergic effects and mechanism of KGM-DMY complex in the prevention of obesity and enhancement of fatigue resistance in mice

Dietary fibers (DFs) are normally consumed together with polyphenols. Further, both of them are two kinds of popular functional ingredients. However, studies have shown that the soluble DFs and polyphenols are antagonistic to their bioactivity due to the potential loss of the physical properties that drive their benefits. In this study, konjac glucomannan (KGM), dihydromyricetin (DMY), and KGM-DMY complex were fed to mice on normal chow diet (NCD) and high fat diet (HFD). The body fat content, serum lipid metabolites and time to exhaustion in swimming were compared. It was found that KGM-DMY had synergistic effects on the reduction of serum triglyceride, total glycerol content in HFD-fed mice, and extension of time to exhaustion in swimming in NCD-fed mice. The underlying mechanism was explored by antioxidant enzyme activity measurement, energy production quantification, and gut microbiota 16S rDNA profiling. KGM-DMY synergistically reduced the lactate dehydrogenase activity, malondialdehyde production, and alanine aminotransferase activities after swimming. Moreover, superoxide dismutase activities, glutathione peroxidase activities, glycogen and adenosine triphosphate contents were synergistically enhanced by KGM-DMY complex. In addition, according to gut microbiota gene expression analyses, KGM-DMY enhanced the ratio of Bacteroidota/Firmicutes and the abundance of Oscillospiraceae and Romboutsia. The abundance of Desulfobacterota was also reduced. To our knowledge, this was the first experiment that indicated that the complex of polyphenols and DF have synergistic effects in obesity prevention and fatigue resistance. The study provided a perspective for the formulation of obese preventive nutritional supplement in the food industry.

Effect of corn stigma extract on physical and antioxidant properties of biodegradable and edible gelatin and corn starch films

The development of bio-based food packaging with antioxidant properties is an important research topic and has gained prominence these days. In this study, bioactive films were developed based gelatin-corn starch (GCS) incorporated with corn stigma extract (CSE) at different concentrations (15% and 25%; w/v). In preliminary tests, the extract maintained cell viability above 90% indicating that it is safe for application as an active ingredient. Insertion of the extract did not influence the thickness of the films but caused a slight change in optical properties. Scanning electron microscopy (SEM) analysis revealed interactions between the extract's bioactive compounds with gelatin and corn starch compounds, which may have improved the mechanical properties (elongation at break, Young's modulus). The addition of 25% corn stigma extract increased the contact angle, giving the film a hydrophobic character. Furthermore, at this concentration, a 15% reduction in water vapor permeability was observed. The elaborated films showed complete biodegradability before the tenth day of the study. It can be inferred that the films with corn stigma extract have good antioxidant properties, indicating that they can be used as an ingredient for food packaging.

Development of antioxidant-rich edible active films and coatings incorporated with de-oiled ethanolic green algae extract: a candidate for prolonging the shelf life of fresh produce

The concept of sustainability and the substitution of non-biodegradable packaging using biodegradable packaging has attracted gigantic interest. The objective of the present study was to revalorize the biowaste "de-oiled green algae biomass (DAB)" of Dunaliella tertiolecta using a green approach and the development of biodegradable chitosan (CS)-based edible active biocomposite films and coatings for prolonging the shelf life of fresh produce. Ultrasound-assisted green extraction was conducted using food-grade solvent ethanol for obtaining the bio-actives, namely "crude algae ethanolic extract (CAEE)" from DAB. The edible films (CS/CAEE) and coating solutions were developed by incorporating CAEE with varying concentrations (0 to 28%). The CAEE was subjected to MALDI-TOF-MS, NMR, and other biochemical analyses, and was found to be rich in DPPH antioxidant activity (∼40%). The CS/CAEE films were fabricated using a solvent casting method and characterized by several biochemical and physicochemical (FESEM, TGA, FTIR, XRD, WVP, UTM, and rheological) characterization techniques. The addition of CAEE into the CS matrix reduced the maximum film transparency (∼20%), water vapor permeability (∼60%); improved the crystallinity (∼24%), tensile strength (∼25%), and antioxidant activity (∼27%); and exhibited UV-Vis blocking properties as compared to the control film. Besides, the developed coating solutions and CAEE showed biocompatibility with BHK-21 fibroblast cells and antimicrobial activity against common food pathogens. The developed coating solution was applied on green chilli using a dipping method and stored at ambient temperature (25 ± 2 °C, 50-70 % RH) for 10 days. The shelf life of chillies was extended without altering the quality as compared to uncoated green chillies. Therefore, the formulated coating could be applicable for prolonging the shelf life of fresh produce.

Influence of Ulluco Starch Concentration on the Physicochemical Properties of Starch-Chitosan Biocomposite Films

This work aimed to prepare ulluco starch (US)/chitosan (Ch) edible films and evaluate the effect of the concentration of US on their physicochemical properties. The use of edible films is a means of adding value to the ulluco crop and evaluating the viability of using new sources to produce packaging materials. Different samples were prepared at different US concentrations (2%, 3%, 4%, and 5% w/v) and a fixed chitosan concentration (1.5% w/v); then, samples were analyzed, considering their physical, mechanical, and thermal properties. The US/Ch edible films showed an increase in solubility from 17.5% to 21.7%, swelling power (SP) from 38.9% to 267%, tensile strength (TS) from 3.69 MPa to 10.7 MPa, Young modulus (YM) from 18.0 Pa to 652 Pa, and thermal stability as the US concentration increased. However, samples with low US concentrations showed higher elongation at break (EB) (36.6%) and better barrier properties (WVP) (5.61 × 10⁻¹¹ g/m s Pa). The films evaluated in this work presented good physical, mechanical, and barrier properties, revealing their potential as packaging material ensuring food security, and demonstrating the technological potential of US.

Influence of polysaccharide concentration on polyphenol-polysaccharide interactions

Non-covalent interactions between polysaccharides and phenolics affect the physical properties of polysaccharide solutions. These interactions may in turn be influenced by polysaccharide-polysaccharide interactions. To test this hypothesis, we studied the influence of polysaccharide concentration (with guar, β-glucans, and xanthan) on the variations of rheological and water-binding properties upon addition of phenolics compounds (vanillin, caffeic acid, gallic acid, and epigallocatechin gallate). Addition of phenolics led to increased flow behavior index and decreased flow consistency index, with maximum effects at polysaccharide concentrations ranging between 0.6 × C* and 1.4 × C*, where C* is the critical overlap concentration of each polysaccharide. Water mobility was generally not significantly influenced by the addition of phenolics. The results showed that the ability of phenolic compounds to induce aggregation of polysaccharides in solution was strongly influenced by polysaccharide concentration around C* and therefore by polysaccharide-polysaccharide interactions.

Rheological and Microstructural Properties of Xanthan Gum-Based Coating Solutions Enriched with Phenolic Mango (Mangifera indica) Peel Extracts

Mango (Mangifera indica) is a tropical fruit highly desired for its vitamin content and flavor, but its peel is considered a byproduct or waste. However, mango peel contains some bioactive compounds that improve food quality matrix for the development of edible coatings or films. The effect of phenolic mango (Mangifera indica) peel extracts on the physicochemical, rheological, and microstructural properties of xanthan gum-based coating solutions was evaluated. The obtained solutions were stable during the study period and presented a non-Newtonian fluid type shear-thinning behavior described by Ostwald-de Waele. Moreover, viscoelastic properties revealed that the elastic modulus was higher than the viscous modulus, showing a characteristic of weak gels. The addition of extracts did not alter the shear rate and viscoelastic character of the solutions, preserving the pseudoplasticity and weak gel behavior of xanthan gum associated with spreadability and adherence of coatings; it modified the gel structure as a function of temperature. Furthermore, the coating solutions of xanthan gum and phenolic mango peel extracts are an alternative to develop complex food systems such as edible coatings, edible films, or delivery systems.

Impact of Olive Extract Addition on Corn Starch-Based Active Edible Films Properties for Food Packaging Applications

Active edible films based on corn starch containing glycerol as a plasticizer and an olive extract obtained from Spanish olive fruit (Olea europaea) by-products (olive extract; OE) at different concentrations (0, 0.05, 0.1 and 0.2 wt%) were prepared by using the casting technique and further solvent-evaporation. OE showed high total phenolic and flavonoids contents and antioxidant activity, which was evaluated by using three different methods: free radical scavenging assay by (1, 1-Dipheny l-2-picrylhydrazyl) DPPH, 2, 2-Azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) ABTS radical inhibition and ferric reducing antioxidant power (FRAP). The incorporation of OE into the corn starch/glycerol matrix underlined the antioxidant potential and antimicrobial effect against E. coli and S. aureus of these novel active films, being noticeable for films added with 0.2 wt% OE. The developed active films showed a clear thermo-oxidative stability improvement with OE incorporation, in particular at 0.2 wt% loading with an increase of around 50 °C in the initial degradation temperature (Tini) and oxidation onset temperature (OOT). The functional properties of control films were also improved with OE addition resulting in a decrease in Young's modulus, elongation at break, shore D hardness and water vapor permeability. The present work suggested the potential of the developed corn starch-based edible films as low-price and sustainable food packaging systems to prevent the oxidative deterioration of packaged foodstuff while reducing also the generation of olive by-products.

Humectability and physical properties of hydroxypropyl methylcellulose coatings with liposome-cellulose nanofibers: Food application

The objective of this study was to investigate the physical, rheological and humectability properties of edible coating forming suspensions (ECS) based on hydroxypropyl methylcellulose (HPMC) containing: liposomes that encapsulate rutin, glycerol and cellulose nanofibers on sliced surfaces of almonds and chocolate. On average, liposomes measured between 110.6 ± 10.0 nm and were characterized as stable and homogeneous suspensions. Adding these liposomes to the edible coatings produced significant changes (p< 0.05) in the density and surface tension, which favor the final appearance of the coating. The presence of liposomes increased the apparent viscosity of the ECS, showing a purely viscous and fluid behavior with a good fit (R² = 0.9996) with the Power Law model. The presence of liposomes and cellulose nanofibers decreased the value of the cohesive energy of the ECS. The studied ECS partially hydrate the surfaces of almond and chocolate as they showed contact angles under 90°.

Impact of molecular interactions with phenolic compounds on food polysaccharides functionality

Commercial trends based of the emergence of plant-based functional foods lead to investigate the structure-function relationship of their main bioactive constituents and their interactions in the food matrix and throughout the gastro-intestinal tract. Among these bioactive constituents, dietary polysaccharides and polyphenols have shown to interact at the molecular level and these interactions may have consequences on the polysaccharides physical and nutritional properties. The methods of investigation and mechanisms of interactions between polysaccharides and polyphenols are reviewed in light of their respective technological and nutritional functionalities. Finally, the potential impact of the co-occurrence or co-ingestion of polyphenols and polysaccharides on the technological and nutritional functionality of the polysaccharides are investigated.

A review on versatile applications of blends and composites of CNC with natural and synthetic polymers with mathematical modeling

Cellulose is world's most abundant, renewable and recyclable polysaccharide on earth. Cellulose is composed of both amorphous and crystalline regions. Cellulose nanocrystals (CNCs) are extracted from crystalline region of cellulose. The most attractive feature of CNC is that it can be used as nanofiller to reinforce several synthetic and natural polymers. In this article, a comprehensive overview of modification of several natural and synthetic polymers using CNCs as reinforcer in respective polymer matrix is given. The immense activities of CNCs are successfully utilized to enhance the mechanical properties and to broaden the field of application of respective polymer. All the technical scientific issues have been discussed highlighting the recent advancement in biomedical and packaging field.

Antioxidant edible films based on chitosan and starch containing polyphenols from thyme extracts

The aim of this study was to analyse the antioxidant activity of different polymeric matrices based on chitosan and starch, incorporating a thyme extract (TE) rich in polyphenols. TE provided the films with remarkable antioxidant activity. When mixed with chitosan, the polyphenols interacted with the polymer chains, acting as crosslinkers and enhancing the tensile behaviour of films. The opposite effect was observed when incorporated into the starch matrix. All the films became darker, more reddish and less transparent when TE was incorporated. These colour changes were more marked in starch matrices, which suggests that TE compounds were poorly encapsulated. The use of chitosan-based matrices carrying TE polyphenols is recommended as a means of obtaining antioxidant films, on the basis of their tensile response and greater antioxidant activity, which could be associated with the development of polyphenol-chitosan interactions, contributing to a better protection of the functionality of polyphenols during film formation and conditioning.