Freeze–thaw stability of edible oil-in-water emulsions stabilized by sucrose esters and Tweens

Comparison of Emulsion Stabilizers: Application for the Enhancement of the Bioactivity of Lemongrass Essential Oil

Recent focus on cellulose nanomaterials, particularly biodegradable and biocompatible cellulose nanocrystals (CNCs), has prompted their use as emulsion stabilizers. CNCs, when combined with salt, demonstrate enhanced emulsion stabilization. This study explored three emulsion stabilizers: Tween 80, soybean CNCs with salt (salted CNCs), and a combination of salted CNCs with Tween 80. Soybean CNCs, derived from soybean stover, were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Antifungal testing against Aspergillus flavus revealed increased bioactivity in all lemongrass essential oil (EO)-loaded emulsions compared to pure essential oil. In addition, all three emulsions exhibited a slight reduction in antifungal activity after 30 days of room temperature storage. The release experiment revealed that the EO-loaded nanoemulsion exhibited a slow-release profile. The nanoemulsion stabilized by salted CNCs and Tween 80 exhibited significantly lower release rates when compared to the nanoemulsion stabilized solely by Tween 80, attributed to the gel network formed by salted CNCs. The findings of this study highlight the efficacy of cellulose nanocrystals procured from soybean byproducts in conjunction with synthetic surfactants to create nanoencapsulated essential oils, resulting in improved antimicrobial efficacy and the achievement of sustained release properties.

Hyaluronic Acid Poly(glyceryl)10-Stearate Derivatives: Novel Emulsifiers for Improving the Gastrointestinal Stability and Bioaccessibility of Coenzyme Q10 Nanoemulsions

Fish oils are a rich source of polyunsaturated fatty acids, including eicosapentaenoic acid and docosahexaenoic acid, which are reported to exhibit therapeutic effects in a variety of human diseases. However, these oils are highly susceptible to degradation due to oxidation, leading to rancidity and the formation of potentially toxic reaction products. The aim of this study was to synthesize a novel emulsifier (HA-PG10-C18) by esterifying hyaluronic acid with poly(glyceryl)₁₀-stearate (PG10-C18). This emulsifier was then used to formulate nanoemulsion-based delivery systems to co-deliver fish oil and coenzyme Q10 (Q10). Q10-loaded fish oil-in-water nanoemulsions were fabricated, and then their physicochemical properties, digestibility, and bioaccessibility were measured. The results indicated that the environmental stability and antioxidant activity of oil droplets coated with HA-PG10-C18 surpassed those coated with PG10-C18 due to the formation of a denser interfacial layer that blocked metal ions, oxygen, and lipase. Meanwhile, the lipid digestibility and Q10 bioaccessibility of nanoemulsions formulated with HA-PG10-C18 (94.9 and 69.2%) were higher than those formulated with PG10-C18 (86.2 and 57.8%), respectively. These results demonstrated that the novel emulsifier synthesized in this study could be used to protect chemically labile fat-soluble substances from oxidative damage, while still retaining their nutritional value.

Reversibility of freeze-thaw/re-emulsification on Pickering emulsion stabilized with gliadin/sodium caseinate nanoparticles and konjac glucomannan

The reversibility of freeze-thaw/re-emulsification of Pickering emulsion stabilized by gliadin/sodium caseinate nanoparticles (Gli/CAS NPs) was improved by adding konjac glucomannan (KGM). With the increase in the KGM concentration, the delamination of emulsions after freeze-thaw treatment was significantly improved. The microstructure showed that the presence of KGM helped to maintain the network structure of continuous phases. In particular, the particle size of the emulsion did not increase significantly after three freeze-thaw cycles when the KGM concentration was 0.6 % and the oil phase fraction was 60 %. The results of flocculation degree and coalescence degree also indicated that KGM promoted the cross-linking between particles on the surface of the droplet and increased the thickness of the interfacial film of the droplet. Rheological analysis also proved the same result: the elastic modulus of the emulsion was still larger than the viscous modulus, which showed the ideal freeze thaw reversibility. After adding KGM, the emulsion formed a strong network structure with good stability for long-term storage and reversibility for freeze-thaw cycling/re-emulsification. Thus, the emulsion has broad application prospects in food, cosmetics, and pharmaceutical fields.

The Use of Corn Stover-Derived Nanocellulose as a Stabilizer of Oil-in-Water Emulsion

Agricultural byproducts such as corn stover are widely available sources for preparation of nanocellulose, which is an emerging green chemical with versatile applications. In this study, corn stover-derived nanocellulose was prepared via bleaching, alkaline treatment, 2,2,6,6-tetramethylpiperidin-1-oxyl (TEMPO) oxidation, and ultrasonication. The as-prepared TEMPO-oxidized cellulose nanofibril (TEMPO-CNF) was characterized by transmission electron microscopy, UV-Vis spectrophotometry, rheometry, and zeta potential measurement. Droplet size, phase behavior, and thermodynamic stability of TEMPO-CNF stabilized oil-in-water emulsions were investigated. Results show that TEMPO-CNF with a width of 4 nm, length of 353 nm, and surface charge of 1.48 mmol/g COO^- can be prepared from corn stover. In addition, TEMPO-CNF can be used as an emulsion stabilizer for lemongrass essential oil loaded oil-in-water emulsion. This study is among the first to report that TEMPO-CNF improved the freeze-thaw stability of oil-in-water emulsions stabilized by small molecular weight surfactants (e.g., Tween 80).

Study on stability of grape seed oil/rice hydrolyzed protein emulsion

In this study, the stability mechanism of grape seed oil/rice hydrolyzed protein emulsion was studied. The grape seed oil (10% v/v) and rice hydrolyzed protein (2% w/v) were homogenized under high pressure to prepare the emulsion. It was observed by CLSM and Multiple light scatterometer that the emulsion had long-term storage stability, and the average particle size of droplets was 0.984–1.363 µm. ζ-potential ranged from −37.733 mV to −25.633 mV. It is found that the emulsion has strong resistance to temperature, ions and other environmental factors from the macroscopic and microscopic structure, and no emulsion stratification phenomenon occurs. The composite emulsion can be used in the field of food industry and fine chemical industry, which can provide nutrition and functionality of products, its research has certain value and has a wide space for development.

Storage Stability of Chilled and Frozen Starch Gels as Affected by Blended Starch Formulation, Sucrose Syrup, and Coconut Milk

Effects of starch formulation, highly concentrated sucrose solution, and coconut milk on the stability of starch gels kept under chilled and frozen conditions were determined. Gels containing rice starch (RS), tapioca starch (TS) (RS:TS of 1 : 0.85), and hydroxypropyl distarch phosphate (HDP, 0-50% of total starch) were prepared from 15% starch suspension using water, 45°Brix sucrose syrup or coconut milk as liquid media. After aging at 4°C for 21 days, starch gels had higher hardness and chewiness, with lower cohesiveness and springiness (p ≤ 0.05). Water-based gels containing HDP had less extent of texture hardening, lower degree of crystallinity, and more homogeneous microstructure during 4°C aging. However, for the starch gels in sucrose syrup or coconut milk, HDP induced greater gel hardening, higher degree of crystallinity, and denser gel microstructure during chilled storage. This could be due to the crystallization of sucrose or lipid/amylose-lipid complexes. Nevertheless, HDP enhanced freeze-thaw stability of the gels, regardless of the liquid media used (p ≤ 0.05). According to the consumer test of the model desserts subjected to a single freeze-thaw cycle, the sample containing 50% HDP gel in sucrose syrup or 25% HDP gel in coconut milk gained the highest hedonic score of texture and overall acceptance (p ≤ 0.05).

Water-in-Oil-in-Water Nanoemulsions Containing Temulawak (Curcuma xanthorriza Roxb) and Red Dragon Fruit (Hylocereus polyrhizus) Extracts

Hydrophobic curcumin in temulawak extract and hydrophilic betacyanin in red dragon fruit extract are high-value bioactive compounds with extensive applications in functional food. In this study, these extracts were encapsulated in water-in-oil-in-water (w/o/w) nanoemulsions as a delivery system using a two-step high-energy emulsification method. PGPR and Span 20 were used as lipophilic emulsifiers for the primary w/o emulsion. The most stable w/o/w formulation with the least oil phase separation of 5% v/v consisted of w/o emulsion (15% w/w) and Tween 80 (1.5% w/w) as hydrophilic emulsifier. The formulation was characterized by a 189-nm mean droplet diameter, 0.16 polydispersity index, and –32 mV zeta potential. The freeze–thaw stability may be attributed to the combination of low w/o emulsion content and high Tween 80 concentration in the outer water phase of the w/o/w nanoemulsions used in this study. The IC₅₀ values of the nanoemulsion and the red dragon fruit extract were similar. It means that the higher concentration of curcumin in the nanoemulsions and the lower IC₅₀ value of temulawak extract ensured sufficient antioxidant activities of the w/o/w nanoemulsions.

Sucrose fatty acid esters: synthesis, emulsifying capacities, biological activities and structure-property profiles

The notable physical and chemical properties of sucrose fatty acid esters have prompted their use in the chemical industry, especially as surfactants, since 1939. Recently, their now well-recognized value as nutraceuticals and as additives in cosmetics has significantly increased demand for ready access to them. As such a review of current methods for the preparation of sucrose fatty acid esters by both chemical and enzymatic means is warranted and is presented here together with an account of the historical development of these compounds as surfactants (emulsifiers). The somewhat belated recognition of the antimicrobial, anticancer and insecticidal activities of sucrose esters is also discussed along with a commentary on their structure-property profiles.

Bergamot essential oil nanoemulsions: antimicrobial and cytotoxic activity

Bergamot essential oil (BEO) is well-known for its food preservation activity, as well as anticancer efficacy. However, the poor BEO water solubility and deriving low bioaccessibility have limited its wider applications. The incorporation in nanoemulsions of BEO and its refined fractions was investigated to enhance its dispersibility in water to promote its antimicrobial activity, tested against Escherichia coli, Lactobacillus delbrueckii, and Saccharomyces cerevisiae, and its cytotoxicity already at low concentrations. Different nanoemulsion formulations were tested based on food-grade ingredients, which were characterized in terms of hydrodynamic diameter and polydispersity index, and physical stability. The antimicrobial activity against all the tested micro-organisms was observed to be higher for BEO in its initial composition, than the light fraction, richer in d-limonene, ß-pinene, and γ-terpinene, or the heavy fraction, richer in linalyl acetate and linalool. Remarkably, the use of BEO nanoemulsions notably enhanced the antimicrobial activity for all the tested oils. BEO exhibited also a measurable cytotoxic activity against Caco-2 cells, which was also enhanced by the use of the different nanoemulsions tested, in comparison with free oil, which discourages the direct use of BEO nanoemulsions as a food preservative. Conversely, BEO nanoemulsions might find use in therapeutic applications as anticarcinogenic agents.

Techno-biofunctionality of mangostin extract-loaded virgin coconut oil nanoemulsion and nanoemulgel

Techno-biofunctional characteristics of nanoemulsion and (nano)emulgel loaded with mangostin extracts were elucidated. Crude mangostins from mangosteen peels recovered by virgin coconut oil (VCO), mixed VCO and propylene glycol (PG), and pure PG were used. The extracts were loaded in the dispersed phase in the presence of mixed surfactants (Tween20/Span20) with a varying hydrophilic-lipophilic balance (HLB) from 10.2 to 15.1. Results showed that globular and uniformly distributed droplets of the nanoemulsion were observed. The small particle sizes (typically 18-62 nm) with the zeta potential of -39 to -54.5 mV were obtained when mixed emulsifiers with HLB values of 12.6 and 15.1 were employed. With HLB values of 12.6 and 15.1, nanoemulsions loaded with mangostin extracts prepared with mixed VCO-PG and pure PG-based extracts showed approximately a 2 to 3-fold lower droplet size diameter when compared with the VCO-based extract. For the stability test, all nanoemulsions were stable over three freeze-thaw cycles with some changes in pH, zeta potential, and droplet size. The DPPH● scavenging activity, H2O2 scavenging activity, reducing power and antibacterial activities (E. coli and S. aureus) of the nanoemulsions were greater than their corresponding bulk extracts. Nanoemulgels produced by embedding the nanoemulsions in a hydrogel matrix was homogeneous and creamy yellow-white in appearance. The nanoemulgels had a higher mangostin release (87-92%) than their normal emulgels (74-78%). Therefore, this study presented the feasibility of nanoemulsions and nanoemulgels loaded with mangostin extracts as a promising delivery system for bioactive polyphenol in food supplements, pharmaceuticals and cosmetics.

Influence of Protein Hydrolysis on the Freeze-thaw Stability of Emulsions Prepared with Soy Protein - Dextran Conjugates

Protein hydrolysis on the freeze-thaw stability of emulsions prepared with soy protein - dextran conjugates were investigated. Soy protein isolate-dextran (SPI-D) and soy protein hydrolysates-dextran (SPH-D) conjugates with different degree of hydrolysis (DH) were formed by Maillard reaction. The formation of protein-polysaccharide conjugates between SPI/SPH and dextran molecules was confirmed by SDS-PAGE; this finding was consistent with the degree of glycation and the browning index. The freeze-thaw emulsion stability was investigated. The results confirmed that the SPH3-D (DH at 3%) emulsion with 3% DH of SPI exhibited the lowest creaming index after experiencing 1, 2, and 3 freeze-thaw cycles , with results of 7.69%, 20.74% and 31.30%, respectively. The SPH3-D emulsion had a significantly lower average particle size, which was reduced by 48.28% compared to the SPI-D emulsion. Meanwhile, the SPH3-D solution had low interfacial tension. The confocal laser scanning microscopy analysis indicated that the SPH3-D emulsions were strongly stable against the freeze-thaw treatment and could be used as effective emulsifiers in frozen foods.

Effect of high-intensity ultrasound irradiation on the stability and structural features of coconut-grain milk composite systems utilizing maize kernels and starch with different amylose contents

In this paper, a coconut milk composite system (glycerin monostearate as an emulsifier) with different maize additives (e.g., maize kernels and starch with different amylose contents) was treated with high-intensity ultrasound irradiation (HIUS, frequency 20 kHz). The stability and structural features of the added coconut milk emulsion were studied. Comparing the mechanical emulsifications, coconut milk with maize kernels was similar to coconut milk with high-amylose maize starch. However, coconut milk with a high proportion of amylopectin had the best stability. After ultrasonic treatment, the particle sizes were found to be smaller than those in the nonultrasound-treated coconut milk, and the particles demonstrated a monomodal size distribution. The electronegativity of the compound system was significantly improved. The electronegativity of the maize kernel and high-amylose maize starch-coconut milk systems was significantly decreased, and this change was beneficial to the stability of the systems. However, ultrasonic treatment did not change the fluid type of the coconut milk compound system (which showed pseudoplastic fluid characteristics). The proportion of amylose in maize had an important influence on the stability of the compound system. The apparent viscosity and crystallization order of the high-amylose maize starch-coconut milk system were high. However, the waxy maize starch system showed high complex viscosity and tended to be liquid with ultrasonic treatment. Ultrasound treatment reduced the particle size of coconut milk and homogenized the distribution of the system. Additionally, the amylase of the system contained amylose encapsulated in the interfacial layer after ultrasound treatment. The tiny gel beads formed by waxy maize starch had a good fusion effect on coconut milk fat/protein droplets. The results indicated that the stability of coconut-grain milk composite systems can be enhanced with the use of maize additives and ultrasound irradiation through space effects, electrostatic effects and continuous phase viscosity.

Effects of freezing and the cryoprotectant lactobionic acid in the structure of GlnK protein evaluated by circular dichroism (CD) and isothermal titration calorimetry (ITC)

Freezing is a widely applied method in food preservation. The technique has negative effects on sensory and textural properties of some foods. In this study the effects of the freeze-thaw process and lactobionic acid (LBA) as a cryoprotectant on GlnK protein solution were evaluated by circular dichroism (CD) analysis and isothermal titration calorimetry (ITC). The freeze-thaw cycles caused changes in GlnK conformation and interactions with small ligands (adenosine triphosphate, ATP). CD assay demonstrated changes in the molar ellipticity values of the samples subjected to freezing, indicating conformational changes to the GlnK protein. Additionally, ITC analysis indicated that the freeze-thaw process caused changes in the interaction properties of GlnK with its ligand ATP. LBA cryoprotectant activity was also evaluated and with both of the techniques it was demonstrated that the compound prevented the damage caused by the freeze-thaw process, thereby maintaining the characteristics of the samples.

Influence of morphology and polymorphic transformation of fat crystals on the freeze-thaw stability of mayonnaise-type oil-in-water emulsions

This study examined the destabilization of an oil-in-water (O/W) emulsion by freeze-thawing with a focus on the influence of the morphology and polymorph of fat crystals. For a model of food emulsion, this study used a mayonnaise-type O/W emulsion containing 70wt% canola oil (canola emulsion) or soybean oil (soybean emulsion) stored at -15, -20, and -30°C. The freeze-thaw stabilities of the emulsions were evaluated by measuring the upper oil layer after freeze-thawing. The soybean emulsion kept at -20°C had the highest stability; the other emulsions were destabilized during 6h of storage. Crystallization in the emulsions was determined using differential scanning calorimetry (DSC), time variation of temperature, X-ray diffraction measurement, and polarized light microscopy. DSC thermograms indicated that crystallization in emulsions occurred first in the high-melting fraction of oil, followed by water and, last, in the low-melting fraction of oil during cooling to -40°C. In the canola emulsion, the amount of fat crystals derived from the low-melting fraction of oil increased during storage at all temperatures, resulting in partial coalescence. The soybean emulsion was expected to be destabilized by polymorphic transformation (sub-α to β' and β) of fat crystals derived from the high-melting fraction during storage at -15 and -20°C. However, the soybean emulsion did not exhibit polymorphic transformation stored at -30°C, and the amount of fat crystals did not increase during freezing; thus, it was destabilized via a different mechanism.