Pellets based on polyuronates: Relationship between gelation and release properties

Hexavalent chromium detoxification by haloalkaliphilic Nesterenkonia sp strain NRC-Y immobilized in different matrices.. [DOI: 10.21203/rs.3.rs-2870155/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

In order to develop a bioprocess for Cr(VI) detoxification in industrial effluent, a previously isolated potent Cr(VI) reducing haloalkaliphilic Nesterenkonia sp strain NRC-Y was immobilized in nine different matrices including natural polymer, modified natural, synthetic and mixtures of natural and synthetic polymers and investigated for Cr(VI) detoxification. Among the tested carriers and immobilization approaches, Nesterenkonia sp NRC-Y cells encapsulated in amidated pectin beads showed highest Cr(VI) reduction efficiency (58.4% of initial Cr(VI) concentration 150 mg/L after 20 h), followed by alginate, alginate-PVA, alginate-PVA-chitosan, PVA-PVP, and PVA respectively. Therefore, amidated pectin was selected for further investigation and immobilization of both whole cells and chromate reductase. Operational stability study revealed that immobilized whole cell was more efficient and stable than immobilized chromate reductase and the free cells retaining about 60%, 27.0% and 11.5% of its initial activity after four successive batches, respectively. The temperature and pH optima for the immobilized cells were 35⸰C and 7.0, respectively. The pH and thermal stability of Nesterenkonia sp NRC-Y cells were significantly enhanced upon immobilization in amidated pectin beads. The developed immobilized biocatalyst was applied for Cr(VI) reduction in industrial effluent samples, and was able to completely reduce Cr(VI) within 4 and 8 h for effluents for initial Cr(VI) concentrations of 10 and 30 mg/L, respectively. To the best of our knowledge, this is the first report about of Cr(VI) detoxification by immobilized Nesterenkonia sp NRC-Y in amidated pectin beads. The developed immobilized biocatalyst is promising and has the potential for large-scale Cr(VI) detoxification application.

Core-shell polygalacturonate magnetic iron oxide nanoparticles: Synthesis, characterization, and functionalities

This work aims to synthesize polygalacturonate-based magnetic iron oxide nanoparticles (INP-polyGalA). The synthesis consists of the diffusion of both Fe²⁺ and Fe³⁺ at a molar ratio of 1:2 through polyGalA solution followed by the addition of an alkaline solution. To form individual nanoparticle materials, the polyGalA concentration needs to be below its overlapping concentration (C*). The synthesized materials (INP-polyGalA) contain about 45 % of organic compound (polyGalA), and they have an average particle size ranging from 10 to 50 nm as estimated by several techniques (DLS, TEM and AFM) and their surfaces are negatively charged in pH range 2 to 7. The synthesized NPs showed magnetic characteristics, thanks to the formation of magnetite (Fe₃O₄) as confirmed by X-ray diffractions (XRD). Moreover, AFM combined with Infra-red mapping allowed us to conclude that polyGalA is located in the core of the nanoparticles but also on their surfaces. More specially, both carboxylate (COO^-) and carboxylic (COOH) groups of polyGalA are observed on the NPs surfaces. The presence of such functional groups allowed the synthesized material to (i) bind through the electrostatic interactions methylene blue (MB) which may have a great potential for r pollution control or (ii) to form hydrogel beads (ionotropic gelation) by using calcium as a crosslinking agent which can be used to encapsulate active molecules and target their release by using an external stimulus (magnetic field).

Silica-coated calcium pectinate formulations for controlling carbendazim release: water and soil release studies

This study aims to encapsulate the fungicide carbendazim using a biodegradable polymer (pectin). First, we have obtained calcium pectinate beads (CPG-Carb) by ionotropic gelation using calcium ions as a crosslinking agent. These beads were then coated with silica starting from tetraethoxysilane (TEOS), by a sol-gel process to form hybrid beads (CPG-Carb-SG). The morphology, composition and structure of both beads were characterized and the controlled release assays of the fungicide were studied in both water and soil columns. The encapsulation efficiency for CPG-Carb was slightly higher (75%) compared to CPG-Carb-SG (67%) due to carbendazim loss during the impregnation and condensation steps. The release rate in water and soil columns was about 4 times lower for CPG-Carb-SG than CPG-Carb demonstrating the efficiency of the silica coating to delay the release of carbendazim. Moreover, the release of CPG-Carb-SG is due to the erosion of the silica layer during the first two weeks. After this period, the silica layer was degraded, and the release is then controlled by the swelling of the organic part of the bead as observed for CPG-Carb. Finally, the biodegradability of the pectin, and the release profile make such systems promising candidates for sustained and economical pesticide delivery systems.

Egg-box model-based gelation of alginate and pectin: A review

Alginate and pectin are emblematic natural polyuronates that have been widely used in food, cosmetics and medicine. Ca-dependent gelation is one of their most important functional properties. The gelation mechanisms of alginate and pectin, known as egg-box model, were believed to be basically the same, because their Ca-binding sites show a mirror symmetric conformation. However, studies have found that the formation and the structure of egg-box dimmers between alginate and pectin were different. Very few studies have reviewed those differences. Therefore, this study was proposed to first summarize the intrinsic and extrinsic factors that can influence the gelation of alginate and pectin. The differences in the effect of these factors on the gelation of alginate and pectin were then discussed. Meanwhile, the similarity and difference in their gelation mechanism was also summarized. The knowledge gained in this review would provide useful information for the practical applications of alginate and pectin.

Formulating bacterial endophyte: Pre-conditioning of cells and the encapsulation in amidated pectin beads

•

Endophytic activity of pre-conditioned and encapsulated cells in amidated pectin beads

•

Hydroxyectoine-added cells within pectin amidated beads increase endophytismus

•

Radish yields increased through the application of encapsulated K. radicincitans cells

•

Entrapped cells chemoattraction towards radish visualized by multispectral imaging

Despite the benefits of bacterial endophytes, recent studies on the mostly Gram-negative bacteria lack of regard for formulation strategies. The encapsulation into biopolymeric materials such as amidated pectins hydrogels is a suitable alternative. Here, this research aimed at supporting the capability of the plant growth-promoting bacteria Kosakonia radicincitans DSM16656^T to endophytically colonize plant seedlings. In this approach, the pre-conditioned cells through osmoadaptation and hydroxyectoine accumulation were used. In general, pre-osmoadapted and hydroxyectoine-supplemented bacteria cells formulated in amidated pectin dried beads increased the endophytic activity by 10-fold. Moreover, plant promotion in radish plants enhanced by 18.9% and 20.7% for a dry matter of tuber and leaves. Confocal microscopy studies with GFP-tagged bacteria revealed that bacterial aggregates formed during the activation of beads play an essential role in early colonization stages. This research encourages the integration of fermentation and formulation strategies in a bioprocess engineering approach for exploiting endophytic bacteria.

Controlled Loading and Release of Beta-Lactoglobulin in Calcium-Polygalacturonate Hydrogels

We show here how the structure of polygalacturonate (polyGalA) hydrogels cross-linked by Ca²⁺ cations via external gelation controls the loading and release rate of beta-lactoglobulin (BLG), a globular protein. Hydrogels prepared from a polyGalA/BLG solution are found to be similar to those obtained from a polyGalA solution in our previous study (Maire du Poset et al. Biomacromolecules 2019, 20 (7), 2864-2872): they exhibit similar transparencies and gradients of mechanical properties and polyGalA concentrations. The nominal BLG/polyGalA ratio of the mixtures is almost recovered within the whole mixed hydrogel despite such strong concentration gradients, except in the part of the hydrogels with the largest mesh size, where more BLG proteins are present. This gradient enables one to tune the amount of protein loaded within the hydrogel. At a local scale, the proteins are distributed evenly within the hydrogel network, as shown by small-angle neutron scattering (SANS). The release of proteins from hydrogels is driven by Fickian diffusion, and the release rate increases with the mesh size of the network, with a characteristic time of a few hours. The specific structure of these polysaccharide-based hydrogels allows for control of both the dosage and the release rate of the loaded protein and makes them good candidates for use as oral controlled-delivery systems.

Development, characterisation and nasal deposition of melatonin-loaded pectin/hypromellose microspheres

In this study, we present the development of spray-dried pectin/hypromellose microspheres as efficient melatonin carrier for targeted nasal delivery. Different pectin to hypromellose weight ratios in the spray-dried feed were employed (i.e. 1:0, 3:1, 1:1 and 1:3) in order to optimise microsphere physicochemical properties influencing overall powder behaviour prior, during and upon nasal delivery. All microspheres assured complete melatonin entrapment and increased dissolution rate in relation to pure melatonin powder. Among all combinations tested, combining pectin with hypromellose at 1:3 wt ratio resulted in the microspheres with the highest potential for melatonin nasal delivery as they assured highest swelling ability and most prominent mucoadhesive properties. Studies on deposition profile revealed adequate turbinate and olfactory deposition of microsphere/lactose monohydrate powder blend administered nasally using MIAT® device, complementing findings relevant for their therapeutic potential. In conclusion, developed microspheres bear the potential to ensure prolonged melatonin retention at the nasal mucosa, improved bioavailability and advanced therapeutic outcome.

Tuning the Structure of Galacturonate Hydrogels: External Gelation by Ca, Zn, or Fe Cationic Cross-Linkers

We show here how the nature of various divalent cations M²⁺ (Ca²⁺, Zn²⁺, or Fe²⁺) influences the structure and mechanical properties of ionotropic polygalacturonate (polyGal) hydrogels designed by the diffusion of cations along one direction (external gelation). All hydrogels exhibit strong gradients of polyGal and cation concentrations, which are similar for all studied cations with a constant ratio R = [M²⁺]/[Gal] equal to 0.25, showing that every M²⁺ cation interacts with four galacturonate (Gal) units all along the gels. The regions of the hydrogels formed in the early stages of the gelation process are also similar for all cations and are homogeneous, with the same characteristic mesh size (75 ± 5 Å, as measured by small angle neutron scattering (SANS)) and the same storage modulus G' (∼5 × 10⁴ Pa). Conversely, in the regions of the gels formed in later stages of the process there exist differences in mechanical properties, turbidity, and local structure from one cation to another. Zn(II)-polyGal and Fe(II)-polyGal hydrogels display mesoscopic heterogeneities, more marked in case of Fe than for Zn, that are not present in Ca(II)-polyGal hydrogels. This comes from the mode and the strength of association between the cation and the Gal unit (bidentate for Ca²⁺ and monodentate "egg-box" for Zn²⁺ and Fe²⁺). Cross-links formed by Zn²⁺ and Fe²⁺ have a higher stability (lower ability to untie and reform) that induces the formation of local heterogeneities in the early stages of the gelation process whose size progressively increases during the gel growth, a mechanism that does not occur for cross-links made by Ca²⁺ that are less stable and enable possible reorganizations between polyGal chains.