Cystine-modified biomass for Cd(II) and Pb(II) biosorption

Achieving ultrafast and highly selective capture of radiotoxic tellurite ions on iron-based metal-organic frameworks through coordination bond-dominated conversion

Chemically durable and effective adsorbents for radiotoxic TeOx2- (TeIV and TeVI) anions remain in great demand for contamination remediation. Herein, a low-cost iron-based metal-organic framework (MIL-101(Fe)) was used as an adsorbent to capture TeOx2- anions from contaminated solution with ultrafast kinetics and record-high adsorption capacity of 645 mg g-1 for TeO32- and 337 mg g-1 for TeO42-, outperforming previously reported adsorbents. Extended X-ray absorption fine structure (EXAFS) and density functional theory (DFT) calculations confirmed that the capture of TeOx2- by MIL-101(Fe) was mediated by the unique C-O-Te and Fe-O-Te coordination bonds at corresponding optimal adsorption sites, which enabled the selective adsorption of TeOx2- from solution and further irreversible immobilization under the geological environment. Meanwhile, MIL-101(Fe) works steadily over a wide pH range of 4-10 and at high concentrations of competing ions, and it is stable under β-irradiation even at high dose of 200 kGy. Moreover, the MIL-101(Fe) membrane was fabricated to efficiently remove TeO32- ions from seawater for practical use, overcoming the secondary contamination and recovery problems in powder adsorption. Finally, the good sustainability of MIL-101(Fe) was evaluated from three perspectives of technology, environment, and society. Our strategy provides an alternative to traditional removal methods that should be attractive for Te contamination remediation.

Potential of waste mangosteen shell in the removal of cadmium ions: Effects of pH, contact time, and temperature

In this study, waste biomass adsorbents produced from mangosteen shells (MGS) were prepared (denoted as MGS500 and MGS1000). The physical and chemical characteristics, such as scanning electron microscopy, thermogravimetric-differential thermal analysis, specific surface area, pore volumes, surface functional groups, and point of zero charge of the prepared MGS samples were determined, and the adsorption capacity of cadmium ions from aqueous media was assessed. The effects of pH, adsorption time, temperature, and coexistence on adsorption were carefully assessed using an inductively coupled plasma optical emission spectrometer under several experimental conditions. The adsorption capacity decreased in the order, MGS < MGS500 < MGS1000. The optimal pH for cadmium ion removal was 5.0. The amount of cadmium ions adsorbed gradually increased with time, and adsorption equilibrium was achieved within 24 h after adsorption. Additionally, the amount of adsorbed cadmium ions increased with increasing adsorption temperature. To elucidate the adsorption mechanism in detail, the elemental distribution and X-ray photoelectron spectra of the prepared adsorbents were analyzed. Finally, desorption solutions such as HNO₃, H₂O, and NaOH were used to desorb the absorbed cadmium ions from MGS1000. Under our experimental conditions, the desorption percentage of cadmium ions was approximately 98.8% using HNO₃. In conclusion, MGS1000 exhibited a good adsorption capacity of 12.0 mg/g for adsorbing cadmium ions from aqueous media and desorption capacity with HNO₃ at 1000 mmol/L.

Efficient removal of Cd2+ by diatom frustules self-modified in situ with intercellular organic components

The organic modification of three-dimensional porous diatom frustules (biosilica) and their fossils (diatomite) is promising in heavy metal adsorption. However, the preparation of such materials involves complex processes, high costs, and environmental hazards. In this study, organic-biosilica composites based on in situ self-modification of diatoms were prepared by freeze-drying pretreatment. Freeze-drying resulted in the release of the intercellular organic components of diatoms, followed by loading on the surface of their diatom frustules. The bio-adsorbent exhibits outstanding Cd²⁺ adsorption capacity (up to 220.3 mg/g). The adsorption isotherms fitted the Langmuir model and the maximum adsorption capacity was 4 times greater than that of diatom biosilica (54.1 mg/g). The adsorption kinetics of Cd²⁺ was adequately described by a pseudo-second-order model and reached equilibrium within 30 min. By combining focused ion beam thinning with transmission electron microscopy-energy dispersive X-ray spectroscopy, the internal structure of the composite and the Cd²⁺ distribution were investigated. The results showed that the organic matter of the composite adsorbed approximately 10 times more Cd²⁺ than inorganic biosilica. The adsorption mechanism was dominated by complexation between the abundant organic functional groups (amide, carboxyl, and amino groups) on the surfaces of composite and Cd²⁺. The bio-adsorbent was demonstrated to have wide applicability in the presence of competitive cations (Na⁺, K⁺, Ca²⁺, and Mg²⁺) and under a wide range of pH (3-10) conditions. Thus, the self-modification of diatoms offers a promising organic-inorganic composite for heavy metal remediation.

A Unique Enhancement of Propionibacterium freudenreichii's Ability to Remove Pb(II) from Aqueous Solution by Tween 80 Treatment

Microbial agents have promise for the bioremediation of Pb(II)-polluted environments and wastewater, the biodecontamination of foods, and the alleviation of toxicity in living organisms. The dairy bacterium Propionibacterium freudenreichii is poorly able to remove Pb(II) from aqueous solution at 25 ppm, ranging from 0 to 10% of initial concentration. Here, we report on an original strong enhancement of this activity (ranging from 75% to 93%, p < 0.01) following the addition of a polysorbate detergent (Tween® 80) during or either shortly after the growth of a P. freudenreichii culture. We evaluated the optimal Tween® 80 concentration for pretreatment conditions, documented the role of other detergents, and explored the possible mechanisms involved. Our results reveal a novel, environmentally friendly, low-cost pretreatment procedure for enhancing the selective removal of lead from water by probiotic-documented bacteria.

Advances in biological methods for the sequestration of heavy metals from water bodies: A review

Pollution is a major concern of the modern era as it affects all the principal aspects of the environment, especially the hydrosphere. Pollution with heavy metals has unequivocally threatened aquatic bodies and organisms as these metals are persistent, non-biodegradable, and toxic. Heavy metals tend to accumulate in the environment and eventually in humans, which makes their efficient removal a topic of paramount importance. Treatment of metal-contaminated water can be done both via chemical and biological methods. Where remediation through conventional methods is expensive and generates a large amount of sludge, biological methods are favoured over older and prevalent chemical purification processes because they are cheaper and environment friendly. The present review attempts to summarise effective methods for the remediation of water contaminated with heavy metals. We concluded that in biological techniques, bio-sorption is among the most employed and successful mechanisms because of its high efficacy and eco-friendly nature.

Thermodynamics and Mechanism of the Adsorption of Heavy Metal Ions on Keratin Biomasses for Wastewater Detoxification

The analysis of thermodynamics and mechanism of the adsorption of cadmium, chromium, copper, and lead ions from aqueous solution with two keratin-based biomaterials, namely, human hair and sheep fur, is reported in this paper. The effect of initial ion concentration, temperature, pH, contact time, and biomaterial amount on the removal of these heavy metal ions using these keratinous adsorbents was studied. The adsorption of heavy metal ions was highly dependent on the operating parameters where pH and temperature showed the highest impact. Maximum adsorption capacities of these biomaterials were up to 1.33 and 1.40 mmol/g for chromium ions using human hair and sheep fur, respectively. Adsorption kinetic rates of tested heavy metal ions were calculated via a pseudo-second-order model, and they ranged from 0.054 to 0.261 g/mmol·min. A detailed thermodynamic analysis of lead ion adsorption was performed showing an endothermic removal of this adsorbate with both human hair and sheep fur with adsorption enthalpies of 84.5 and 97.1 kJ/mol, respectively. Statistical physics calculations demonstrated that this heavy metal ion was adsorbed via a multi-interaction mechanism especially for human hair. These keratinous biomaterials showed competitive adsorption capacities especially for chromium ion removal and can outperform commercial activated carbons and other adsorbents reported in literature.

Raphia-Microorganism Composite Biosorbent for Lead Ion Removal from Aqueous Solutions

This study investigated the possibility of obtaining a raphia-microorganism composite for removing lead ions from aqueous solutions using immobilized yeast cells Saccharomyces cerevisiae on Raphia farinifera fibers. The obtained biocomposite was characterized using scanning electron microscopy and Fourier transform infrared spectroscopy. Studies were conducted to determine the influence of contact time, initial concentration of Pb(II), and pH allowed for the selection of nonlinear equilibrium and kinetic models. The results showed that the biocomposite had a better Pb(II) removal capacity in comparison to the raphia fibers alone, and its maximum Pb(II) adsorption capacity was 94.8 mg/g. The model that best describes Pb(II) sorption was the Temkin isotherm model, while kinetic studies confirmed the chemical nature of the sorption process following the Elovich model. The obtained research results provide new information on the full use of the adsorption function of biomass and the ubiquitous microbial resources and their use in the remediation of aqueous environments contaminated with heavy metals.

Modeling analysis on the effective elimination of toxic pollutant from aquatic environment using pyrolysis assisted palmyra palm male inflorescence

In this study adsorption of Cd(II) ions using the pyrolysis assisted Palmyra palm male inflorescence (PAPMI) was systematically examined. A batch adsorption study was carried out to determine the type of interactions and removal efficiency which is based on the surface property of PAPMI. The diverse parameters which affect the adsorption performance of PAPMI for Cd(II) ion removal were optimized: biosorbent dose - 1.25 g/L, pH - 6.0, temperature - 303 K, initial cadmium ions concentration - 50 mg/L and contact time - 40 min. Pseudo-first order kinetics and Langmuir isotherm models were more suitable to describe the adsorption kinetics and isotherm, respectively. Therefore, modeling studies portrayed the present Cd(II) ions adsorption on PAPMI as monolayer adsorption occurs on the homogeneous surface and follows the physisorption mechanism. The maximum adsorption capacity of the synthesized PAPMI was examined as 233.2 mg/g from the equilibrium isotherm investigation. Based on the calculated thermodynamic parameters (ΔG^o, ΔH^o and ΔS^o) values, the present Cd(II) ions adsorption on PAPMI was explicated as feasible, and exothermic. The outcome proposed that Palmyra palm male inflorescence can be a suitable adsorbent for expulsion of Cd(II) ions from aqueous environment. In the interim, the utilization of pyrolysis assisted is a viable and fast uptake innovation for the removal of heavy metals from water environment.

Chemically modified Quercus dilatata plant leaves for Pb (II), Cd (II), and Cr (VI) ions remediation from aqueous solution

The current investigation deals with the removal of Pb (II), Cd (II), and Cr (VI) ions by using chemically modified Quercus dilatata leaves (CMQDL) treated with nitric acid (HNO3), and calcium chloride (CaCl2). Batch biosorption experiments were performed to determine the optimal conditions of pH, biomass dose, temperature, contact time, and initial metal concentration for the utmost removal of heavy metals from water. The structural morphology and functionalities were explained by SEM and FTIR analysis. The maximum biosorption capacities for remediation of Pb (II), Cd (II), and Cr (VI) ions via CMQDL were 17.54, 20.408, 20.83 mg g−1, respectively at the optimal conditions. The Langmuir and Freundlich isotherm were applied to explore the equilibrium data however Freundlich isotherm model best evaluate the equilibrium data with high regression correlation coefficient (R2) values of 0.985, 0.826, and 0.919 for the elimination of Pb (II) Cd (II), and Cr (VI) ions, respectively. The kinetic study proposed that the remediation operation best obeyed the kinetic pseudo 2nd order model. The calculated thermodynamics functions like change in entropy (ΔS°), change in enthalpy (ΔH°) and Gibbs free energy (ΔG°) revealed that the removal of Pb (II) ions via the CMQDL was viable, exothermic and spontaneous, Cd (II) was endothermic and spontaneous and Cr (VI) was endothermic and non-spontaneous. The current study explored that CMQDL can be used for the remediation of Pb (II), Cd (II), and Cr (VI) ions, respectively.

Current advancement and future prospect of biosorbents for bioremediation

The increasing use of heavy metals, synthetic dyes and pesticides is a major environmental concern. Wastewaters containing heavy metals and dyes, extensively released from small and large scale industries enter excessively into food chains resulting in mutagenesis, carcinogenicity and serious health impairments in living systems. The arrays of technologies are implemented to date to remediate both inorganic and organic contaminants from wastewaters. Among which, adsorption is the most attractive method as it employs eco-friendly, sustainable and cost-effective biomaterials. Use of bioadsorbents is advantageous over the conventional adsorbents. Clay, chitin, peat, microbial biomass and agricultural wastes are commonly used bioadsorbants. These bioadsorbents are extensively used for elimination of dyes, heavy metals, adsorption of toxic industrial effluents, removal of fertilizers/pesticides, atmospheric pollutants and nuclear waste from the environment. The current review presents state of the art knowledge on various types of biosorbents, their uses, and mechanism of action. Various strategies to enhance the efficiency of bioadsorbents and physicochemical conditions to remediate dyes and heavy metals from waste streams are also incorporated in this review. Use of nano-bioadsorbents in industries to minimize the hazardous effect of solid and liquid waste has also been discussed.

Intensification of sorption-reduction coupled gold biorecovery process through microbial surface modification: effect on gold sorption and reduction

Biorecovery is emerging as a promising approach to retrieve gold from various sources, while its efficiency is usually restricted by the limited functional groups on natural microbial biomass surface. This study aims to intensify Pycnoporus sanguineus boosted sorption-reduction coupled gold biorecovery process via microbial surface modification. Results showed that grafting polyallylamine hydrochloride onto P. sanguineus biomass surface increased amino group content on microbial biomass surface from 1.29 to 2.81 mmol/g. When applying modified biomass to gold biorecovery with initial gold concentrations of 1.0, 2.0 and 3.0 mM, biosorption equilibrium time shortened to the 12.5%, 37.5% and 41.7% of those obtained with pristine biomass, and sorption rate constants correspondingly increased to 11.2, 3.1 and 3.7 folds as well. Maximum sorption capacity increased 30% and the affinity between biomass and gold enhanced heavily after microbial surface modification. Meanwhile, microbial surface modification favored gold reduction and gold nanoparticles (AuNPs) formation. The change of microbial biomass morphology from smooth surface with some branched structure to layered stacking structure with many pores and the increase of amino group content on microbial biomass surface were the main impetus for the gold bioreocovery process intensification.

Comparative studies on Pb(II) biosorption with three spongy microbe-based biosorbents: High performance, selectivity and application

Lead pollution in industrial-derived water has become an increasingly serious concern. The development of adsorbents with excellent efficiency, selectivity and separability using diverse microorganisms is ideal for treating lead pollution. In this study, gram-negative bacteria Pseudomonas putida I3, gram-positive bacteria Microbacterium sp. OLJ1 and mycelial fungus Talaromyces amestolkiae Pb served as raw materials to facilely synthesize sponge-like biosorbents via a one-step method at room temperature. SEM, EDS, FTIR, ¹³C NMR, XRD and XPS were used for investigating the morphology and surface properties of these three biosorbents. The obtained biosorbents possessed the same three-dimensional porous structure but different productivities and mechanical strengths due to the similar chemical compositions and different cell structures of their microorganisms. Pb(II) adsorption on X-PI3, X-OLJ1 and X-TPb was fast and pH dependent, with maximal adsorption capacities of 345.02, 237.02 and 199.02 mg/g, respectively. The biosorbents had a high selectivity for Pb(II), while Pb(II) remarkably suppressed the adsorption of co-existing heavy metal ions. The analyses indicated that Pb(II) removal was mainly achieved by ion exchange reactions, surface complexation with heteroatom-containing functional groups and microprecipitation. The treatment effects of synthetic and real wastewater revealed that the as-prepared biosorbents are promising for Pb(II) removal.

Preparation of magnetic ion imprinted polymer with waste beer yeast as functional monomer for Cd(ii) adsorption and detection

In this work, a magnetic ion imprinted polymer (MIIP) with specific recognition capability toward cadmium was prepared by a sol–gel method using waste beer yeast, which is a macromolecule biomass, as a functional monomer. The obtained Cd(ii)-MIIP was characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and adsorption experiments. Then, a MIIP adsorbent based magnetic solid phase extraction (MSPE)-graphite furnace atomic absorption (GFAA) method was established to analyze the cadmium content in food and environmental samples. The maximum cadmium adsorption capacities by the MIIP and magnetic non-imprinted polymer (MNIP) were 62.74 and 32.38 mg g⁻¹, respectively. The absorption by the MIIP was fitted using a pseudo-second-order kinetic model. The Cd(ii)-MIIP demonstrated superior absorption capability for selective removal cadmium. The recovery rate of the MIIP was 90.7% after four adsorption–desorption cycles. The calculated Cd(ii) detection limit (S/N = 3) was 0.18 μg L⁻¹ with the relative standard deviation (RSD) equal to ∼3.5% for 10 μg L⁻¹ of Cd(ii) standard solution. Our proposed method was successfully used in detecting Cd(ii) in aqueous samples. The results obtained in this work suggest that the Cd(ii)-MIIPs might be promising adsorbents to remove harmful cadmium ions from aqueous samples.

In this work, a magnetic ion imprinted polymer (MIIP) with specific recognition capability toward cadmium was prepared by a sol–gel method using waste beer yeast, which is a macromolecule biomass, as a functional monomer.

Valorisation possibilities of exhausted biosorbents loaded with metal ions - A review

Biosorption is considered one of the most promising methods for removal of metal ions from aqueous effluents, due to its low-cost and eco-friendly characteristics. However, the exhausted biosorbents loaded with metal ions, obtained at the end of biosorption processes, are still a problem which should be solved to increase the applicability of biosorption on an industrial scale. In this study are examined three possibilities for the valorisation of exhausted biosorbents loaded with metal ions, namely: (i) regeneration and reuse of biosorbents in multiple biosorption cycles, (ii) the use of exhausted biosorbents as fertilizers for soils poor in essential microelements, and (iii) the pyrolysis of exhausted biosorbents, under well defined conditions. The main advantages and disadvantages of each valorisation possibility are reviewed in order to find the best way to use these cheap materials in accordance with the principles of the circular economy and thereby contributing to the development of sustainable biosorption technology.

Rapid removal of Pb2+ from aqueous solution by phosphate-modified baker's yeast

Phosphate-modified baker's yeast (PMBY) was prepared, and used as a novel bio-sorbent for the adsorption of Pb²⁺ from aqueous solution. The influencing factors, absorption isotherms, kinetics, and mechanism were investigated. The scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) characterization and elemental analysis of PMBY showed that phosphate groups were successfully grafted onto the surface of yeast. The kinetic studies suggested that the adsorption process followed a pseudo-second-order chemisorption. The adsorption process of Pb²⁺ using PMBY was spontaneous and endothermic. Furthermore, the adsorption of Pb²⁺ on PMBY can rapidly achieve adsorption equilibrium (in just 3 min), and the maximum adsorption capacity of Pb²⁺ on PMBY was found to be 92 mg g⁻¹ at 30 °C, which was about 3 times that of the pristine baker's yeast. The suggested mechanism for Pb²⁺ adsorption on PMBY was based upon ion-exchange, electrostatic interaction and chelation between the phosphate groups and Pb²⁺. However, compared with the pristine baker's yeast, the higher capacity and rapid adsorption of PMBY for Pb²⁺ was mainly due to the chelation and electrostatic interactions between the phosphate groups and Pb²⁺. In addition, the regeneration experiments indicated that the PMBY was easily recovered through desorption in 0.01 M HCl, and that PMBY still exhibited 90.77% of the original adsorption capacity for Pb²⁺ after five regeneration cycles. These results showed the excellent regeneration capability of PMBY for Pb²⁺ adsorption. PMBY has shown significant potential for the removal of heavy metals from aqueous solution due to its rapid adsorption, high-capacity and facile preparation.

Phosphate-modified baker's yeast (PMBY) was used as a novel bio-sorbent for the adsorption of Pb²⁺ from aqueous solution.

Adsorption of cadmium by live and dead biomass of plant growth-promoting rhizobacteria

Plant growth-promoting rhizobacteria (PGPR) have been extensively investigated in combination remediation with plants in heavy metal contaminated soil. However, being biosorbent, few studies of live and dead cells of PGPR have been undertaken. Meanwhile, the application of live or dead biomass for the removal of heavy metals continues to be debated. Therefore, this study uses living and non-living biosorbents of Cupriavidus necator GX_5, Sphingomonas sp. GX_15, and Curtobacterium sp. GX_31 to compare their Cd(ii) adsorption capacities by SEM-EDX, FTIR, and adsorption experiments. In the present study, whether the cells were living or dead and whatever the initial Cd(ii) concentration was, removal efficiency and adsorption capacity can be arranged as GX_31 > GX_15 > GX_5 (p < 0.05). However, removal efficiency in live and dead biosorbents was quite different and it greatly affected by the initial Cd(ii) concentrations. The dead cells exhibited a higher adsorption capacity than the live cells of GX_31. Nevertheless, for GX_5 and GX_15, the loading capacity of the non-living biomass was stronger than that of the living biomass at 20 mg L⁻¹ of Cd(ii), but the capacity was similar at 100 mg L⁻¹ of Cd(ii). Minor changes of spectra were found after autoclaving and it seemed that more functional groups of the dead biosorbent were involved in Cd(ii) binding by FTIR analysis, which also illustrated that the hydroxyl, amino, amide, and carboxyl groups played an important role in complexation with Cd(ii). Based on these findings, we concluded that the dead cells were more potent for Cd(ii) remediation, especially for GX_31.

Plant growth-promoting rhizobacteria (PGPR) have been extensively investigated in combination remediation with plants in heavy metal contaminated soil.

Characterization and adsorption properties of cross-linked yeast/β-cyclodextrin polymers for Pb(ii) and Cd(ii) adsorption

A cross-linked yeast/β-cyclodextrin polymer (Y–β-CDP) was synthesized to remove Pb(ii) and Cd(ii) from aqueous solution.

Anionically reinforced hydrogel network entrapped fungal cells for retention of cadmium in the contaminated aquatic media

A novel biomass/polymer composite was fabricated by embedding Thamnidium elegans cells in acrylic network of p(3-Methoxyprophyl)acrylamide p(MPA) enriched with 2-Akrylamido-2-methyl-1-propane sulfonic acid (AMPS). Cd(II) retention potential of hydrogel (p(MPA-co-AMPS)) increased by 20.66% times after this enrichment. The gel matrix could be effectively entrapped the biomass and resulting sorbent applied to remove Cd(II) from water in batch and continuous modes. The main physico-chemical parameters are discussed in addition to characterization, regeneration and application studies of the suggested sorbent. Equilibrium occurred within 30 min and Langmuir model predicted the equilibrium data. Kinetics of Cd(II) removal onto immobilized biomass is modeled using the pseudo-second-order rate equation. Maximum monolayer sorption capacity was estimated to be 123.76 mg g^-1 at 25 °C. Designed composite was successfully applied for the removal of Cd(II) from industrial wastewater. EDTA and HNO₃ can be efficiently used for Cd(II) recovery and composite sorbent recycled for at least 12 cycles with nearly stable sorption performance.

Synthesis of carboxyl-introduced chitosan with C2 amine groups protected and its use in copper (II) removal

A route for the formation of carboxyl-introduced chitosan (CI-CS) with C₂ amine groups protected (CIAP-CS) was investigated to improve copper (II) adsorption. First, the C₂ amine groups of the chitosan (CS) were protected via a Schiff-base reaction by benzaldehyde. Then the product was obtained by the introduction of pyromellitic dianhydride to the C₆ hydroxyl groups on CS via epichlorohydrin. The last product was obtained by removing the Schiff base with dilute hydrochloride solution. CI-CS without C₂ amine groups protected was directly synthesized as well. The adsorbents were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD) and X-ray photoelectron spectrometer (XPS). The adsorption properties for copper (II) were investigated. FTIR spectroscopy and XPS clearly showed that most of the amine groups in CS were converted to -N = CH₂ groups after the benzaldehyde treatment and that no cross-linking reactions with CS were involved; the HCl treatment after the cross-linking reaction effectively released nitrogen atoms protected into the form of the primary amine again. The results confirm that the CIAP-CS cross-linked with the new method had significantly greater adsorption capacities than the CI-CS cross-linked directly with CS. Mechanism study revealed that the increased adsorption performance is attributed to the large number of primary carboxyl and amine groups available on the surfaces of the CIAP-CS. The adsorption mechanism is based on ion exchange and chelating action, and the adsorption process is mainly chemisorption.

Adsorption of Cd(II) and Pb(II) by in situ oxidized Fe3O4 membrane grafted on 316L porous stainless steel filter tube and its potential application for drinking water treatment

Removing heavy metal ions from aqueous solutions is one of the most challenging separations. In situ oxidized Fe₃O₄ membranes using 316L porous stainless steel filter tube have shown great potential for removing anion Cr(VI). Here we report the performances of the in situ oxidized Fe₃O₄ membranes for removing two toxic cations Cd(II) and Pb(II) commonly existing in water and their potential applications for drinking water purification. The membranes exhibited high removal efficiency: 97% at pH 9.0 for Cd(II) of 1.0 mg/L initial concentration and 100% at pH 5.0-6.0 for Pb(II) of 5.0 mg/L initial concentration. The maximum adsorption capabilities were estimated at 0.800 mg/g and 2.251 mg/g respectively for Cd(II) and Pb(II) at 318 K by the Langmuir model. Results of batch tests revealed the existence of electrostatic attraction and chemisorption. XRD and FT-IR analyses indicated that the chemisorption might be the insertion of Cd(II) and Pb(II) into the Fe₃O₄ crystal faces of 311 and 511 to form mononuclear or binuclear coordination with O atoms of Fe-O₆ groups. Competitive adsorption of Cd(II) and Pb(II) in binary solutions revealed a preferential adsorption for Pb(II). Na₂EDTA solution was used to regenerate the membranes, and the maximum desorption ratio was 90.29% and 99.75% respectively for Cd(II) and Pb(II). The membranes were able to efficiently lower Cd(II) and Pb(II) concentrations to meet the drinking water standards recommended by the World Health Organization and are promising for engineering applications aimed at drinking water purification.

A facile approach for surface alteration of Pseudomonas putida I3 by supplying K2SO4 into growth medium: Enhanced removal of Pb(II) from aqueous solution

A new sight of obtaining a high efficient biosorbent by supplying specific salts into bacterial growth medium was investigated in this study for Pb(II). Among a series of salts including Na₂SO₄, Na₂S₂O₃, KCl, and K₂SO₄, the highest Pb(II) removal efficiency was observed by psychrotrophilic Pseudomonas putida I3 grown in the presence of 30g/L K₂SO₄ (KSI3-30) with biosorption capacity of 62.89mg/g under cold condition (15°C), which was increased by 42.35% as compared to control (without any additive, RI3). This stimulation effect was ascribed to the increase of potassium and sulfur containing groups on KSI3-30 surface via metabolic dependent ways. The probable mechanism for Pb(II) adsorption was ion-exchange and chemical complexation. The thermal and kinetic data well fitted to Langmuir adsorption model and pseudo-second order and intraparticle diffusion kinetic model. Good recyclability and effectively dealing with real wastewater suggested KSI3-30 was a promising biosorbent for Pb-contaminated wastewater treatment.

Ethylenediamine functionalized carbon nanoparticles: synthesis, characterization, and evaluation for cadmium removal from water

Carbon nanoparticles (CNPs) for the removal of Cd in water: glucose derived CNPs (GCNPs) and ethylenediamine functionalized CNPs (EDA–GCNPs).

Characterization of cadmium biosorption by Exiguobacterium sp. isolated from farmland soil near Cu-Pb-Zn mine

Bacteria have the ability to bind heavy metals on their cell wall. Biosorption is a passive and energy-independent mechanism to adsorb heavy metals. The efficiency of heavy metal biosorption can vary depending on several factors such as the growth phase of bacteria, solution pH, and existence of competitive heavy metals. In this study, Exiguobacterium sp. isolated from farmland soil near a mine site were used, and optimal conditions for Cd biosorption in solution were investigated. As bacterial growth progressed, Cd biosorption increased, which is attributed to changes in the structure and composition of the cell wall during bacterial growth. The biosorption process was rapid and was completed within 30 min. Cadmium biosorption was highest at pH 7 due to the dissociation of hydrogen ions and the increase of negative charges with increasing pH. In the mixed metal solution of Cd, Pb, and Zn, the amount of biosorption was in the order of Pb>Cd>Zn while in a single metal solution, the order was Cd≥Pb>Zn. The maximum adsorption capacity for Cd by the isolated bacteria was 15.6 mg/g biomass, which was calculated from the Langmuir isotherm model. Different adsorption efficiencies under various environmental conditions indicate that, to control metal mobility, the conditions for biosorption should be optimized before applying bacteria. The results showed that the isolated bacteria can be used to immobilize metals in metal-contaminated wastewater.

Surface Modification of Naturally Available Biomass for Enhancement of Heavy Metal Removal Efficiency, Upscaling Prospects, and Management Aspects of Spent Biosorbents: A Review

Heavy metal pollution in water emerges as a severe socio-environmental problem originating primarily from the discharge of industrial wastewater. In view of the toxic, non-biodegradable, and persistent nature of most of the heavy metal ions, remediation of such components becomes an absolute necessity. Biosorption is an emerging tool for bioremediation that has gained momentum for employing low-cost biological materials with effective metal binding capacities. Even though biological materials possess excellent metal adsorption abilities, they show poor mechanical strength and low rigidity. Other disadvantages include solid-liquid separation problems, possible biomass swelling, lower efficiency for regeneration or reuse, and frequent development of high pressure drop in the column mode that limits its applications under real conditions. To improve the biosorption efficiency, biomasses need to be modified with a simple technique for selective/multi-metal adsorption. This review is intended to cover discussion on biomass modification for enhanced biosorption efficiency, mechanism studies using various instrumental/analytical techniques, and future direction for research and development including the fate of spent biosorbent. In most of the previously published researches, difficulty of the process in scaling up has not been addressed. The current article outlines the application potential of biosorbents in the development of hybrid technology integrated with membrane processes for water and wastewater treatment in industrial scale.

Application of l-cystine modified zeolite for preconcentration and determination of ultra-trace levels of cadmium by flame atomic absorption spectrometry

A very convenient, sensitive and precise solid phase extraction (SPE) system was developed for enrichment and determination of ultra-trace of cadmium ion in water and plant samples. This method was based on the retention of cadmium(II) ions by l-cystine adsorbed in Y-zeolite and carry out in a packed mini-column. The retained cadmium ions then were eluted and determined by flame atomic absorption spectrometry. The scanning electron microscopy (SEM), powder X-ray diffraction (XRD) and Fourier Transform Infrared (FT-IR) spectroscopy techniques were applied for the characterization of cystine modified zeolite (CMZ). Some experimental conditions affecting the analytical performance such as pH, eluent type, concentration of sample, eluent flow rate and also the presence of interfering ions were investigated. The calibration graph was linear within the range of 0.1-7.5ngmL(-1) and limit of detection was obtained 0.04ngmL(-1) with the preconcentration factor of 400. The relative standard deviation (RSD) was obtained 1.4%, indicating the excellent reproducibility of this method. The proposed method was successfully applied for the extraction and determination of cadmium(II) ion in black tea, cigarette's tobacco and also various water samples.

Cadmium ion sorption from aqueous solutions by high surface area ethylenediaminetetraacetic acid- and diethylene triamine pentaacetic acid-treated carbon nanotubes

Friedel–Crafts acylation under microwave irradiation has been utilized for realizing functionalization of CNT with EDTA and DTPA. Significant increases in the specific surface area and sequestering metal ions are the most important advantages.

Adsorption and recovery of U(vi) from low concentration uranium solution by amidoxime modified Aspergillus niger

Amidoxime modified Aspergillus niger (AMAN) was prepared by the oximation reaction.

Metal accumulation and antioxidant defenses in the freshwater fish Carassius auratus in response to single and combined exposure to cadmium and hydroxylated multi-walled carbon nanotubes

The effects of cadmium, hydroxylated multi-walled carbon nanotubes, and their mixture on metal accumulation and antioxidant defenses were studied using the goldfish Carassius auratus as the test organism. The fish were exposed to 0.1 mg/L Cd, 0.5 mg/L OH-MWCNTs, or 0.1 mg/L Cd+0.5 mg/L OH-MWCNTs for 3 and 12 days. Then, the Cd concentration was determined in the gill, liver and muscle. Moreover, hepatic antioxidant enzyme activity (superoxide dismutase, catalase and glutathione peroxidase), glutathione level and malondialdehyde content were also measured. A continuous accumulation of Cd was observed throughout the experimental period. Cd accumulation in tissues occurred in the following order: gill>liver>muscle at 3 days and liver>gill>muscle at 12 days. The concentrations of Cd in the livers of fish exposed to the combination of Cd+OH-MWCNTs were significantly higher than those in fish exposed to either single chemical after 12 d of exposure. Meanwhile, the mixture evoked severe oxidative stress in the exposed fish, as indicated by significant inhibition of SOD, CAT and GPx activity, a remarkable decrease in GSH level, and simultaneous elevation of MDA content. These results suggested that the effect of the combined factors on metal accumulation and oxidative stress biomarkers was more obvious than that of single factors at longer exposure durations.

Amino siloxane oligomer-linked graphene oxide as an efficient adsorbent for removal of Pb(II) from wastewater

A high performance sorbent, oligomer-linked graphene oxide (GO) composite, was prepared through simple cross-linking reactions between GO sheets and poly3-aminopropyltriethoxysilane (PAS) oligomers as crosslinking agents. The three-dimensional PAS oligomers prevented GO sheets from aggregation, provided foreign molecules with easier access, and introduced a large amount of amino functional groups. The morphology, structure and property of the PAS-GO composite were determined by scanning electron microscope (SEM), transmission electron microscope (TEM), Fourie transform infrared (FTIR), X-ray diffractometer (XRD), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). The adsorption performance of PAS-GO was investigated in removing Pb(II) ions from water. Compared to 3-aminopropyltriethoxysilane functionalized GO (AS-GO) which was prepared by the direct reaction between 3-aminopropyltriethoxysilane and GO, PAS-GO exhibited much higher adsorptivity toward Pb(II) with the maximum adsorption capacity of 312.5mg/g at 303 K and furthermore the maximum adsorption capacity increased with increasing temperature. The adsorption could be conducted in a wide pH range of 4.0-7.0. Importantly, PAS-GO had a priority tendency to adsorb Pb, Cu and Fe from a mixed solution of metal ions, especially from a practical industrial effluent.

Removal of Pb(II) from water using keratin colloidal solution obtained from wool

The aim of this study is to investigate the use of keratin colloidal solution, which was obtained from wool, for the removal of Pb(II) from water. The addition of keratin colloidal solution (15 g L(-1), 0.30 mL) to a Pb(II) solution (1.0 mM, 0.90 mL, pH 5.0) resulted in the formation and precipitation of a Pb-keratin aggregate. Measurement of the Pb(II) and protein concentrations in the supernatant solution revealed that 88 and 99 % of the Pb(II) and keratin protein were removed from the solution, respectively. The maximum Pb(II) uptake capacity of keratin in the colloidal solution was 43.3 mg g(-1). In addition, the Pb-keratin aggregate was easily decomposed via the addition of nitric acid, which enabled the recovery of Pb(II). However, aggregation did not occur in solutions with Pb(II) concentrations below 0.10 mM. Therefore, we used a keratin colloidal solution encapsulated in a dialysis cellulose tube to remove Pb(II) from 0.10 mM solutions, which enabled the removal of 95 % of the Pb(II). From these results, we conclude that keratin colloidal solution is useful for the treatment of water polluted with Pb(II).

Binding of cadmium to Strychnos potatorum seed proteins in aqueous solution: adsorption kinetics and relevance to water purification

Strychnos potatorum seeds (cleaning nuts or nirmali) are extensively used by remote village tribals in the state of Andhra Pradesh, India for clarification of turbid and metal contaminated water. In the present study the ability of seed proteins to bind aqueous cadmium has been investigated. Biochemical characterization of the seed powder revealed the presence of coagulant proteins. These proteins were isolated from the soluble extracts of the seeds by ammonium sulfate fractionation. The (30-70%) fraction containing the bulk of proteins were separated by gel filtration into two peaks A and B. The (30-70%) ammonium sulfate precipitated proteins, as well as those from Peak A and B were separately immobilized to affigel-10. The Cd(II) biosorption efficiency by these proteins have been investigated. Different experiments have been conducted (i) over a range of pH (2.0-7.0), (ii) contact time (5-600 min), (iii) temperatures (4-40°C) and (iv) metal ion concentrations (80-110 mg L(-1)). The results showed that the optimum conditions for Cd(II) adsorption are almost same for the three proteins used in the study. Cd(II) removal is pH dependent and the maximum removal was at pH 5.0 in a time span of 360 min. The equilibrium data fit into Langmuir isotherm than Freundlich model. The correlation coefficient for the pseudo second order is high (~0.996-1.00) where as the correlation coefficient of the pseudo first order model is too low so the adsorption is better described by pseudo second order model.

Theoretical models of sorption kinetics including a surface reaction mechanism: a review

A review of a certain class of theoretical models describing the kinetics of pollutants sorption onto various sorbents is presented. These assuming the rate of surface reaction as the rate-limiting step are considered. A special attention is paid to possible theoretical grounds of the most commonly applied mathematical expressions, such as the pseudo-second and the pseudo-first order equations. Simple theoretical considerations based on some fundamental theories suggest that these two formulae do not correspond to any specific physical model. They simply approximate well the behaviours predicted by many different theoretical approaches.

Equilibrium and kinetic studies in adsorption of heavy metals using biosorbent: a summary of recent studies

Distinctive adsorption equilibria and kinetic models are of extensive use in explaining the biosorption of heavy metals, denoting the need to highlight and summarize their essential issues, which is the main purpose of this paper. As a general trend, up until now, most studies on the biosorption of heavy metal ions by miscellaneous biosorbent types have been directed toward the uptake of single metal in preference to multicomponent systems. In particular, Langmuir and Freundlich models are the most common isotherms for correlating biosorption experimental data though other isotherms, which were initially established for gas phase applications, can also be extended onto biosorption system. In kinetic modeling, the pseudo-first and -second order equations are considered as the most celebrated models.

Fourier Transform Infrared Spectroscopic characterization and optimization of Pb(II) biosorption by fish (Labeo rohita) scales

The present study reports the use of locally available fish (Labeo rohita) scales for Pb(II) removal from aqueous solutions under different experimental conditions. Maximum Pb(II) adsorption (196.8 mg g(-1)) occurred at pH 3.5. Pb(II) sorption was found to be pH, dose, initial metal concentration, contact time and shaking speed dependent while particle size and temperature independent. Experimental data of Pb(II) biosorption onto fish scales fitted well to Freundlich isotherm model in comparison to the model of Langmuir. The fast adsorption process in first 30 min followed by subsequent slow adsorption rate was suitably described by pseudo-second order model. In addition, this study was designed to evaluate the effect of physical and chemical pretreatments on surface properties of fish scales by the application of Fourier Transform Infrared (FTIR) Spectroscopic analysis. Physical pretreatments resulted in partial degradation of some functional groups. Alkaline pretreatments of fish scales did not have any significant influence on the nature of functional groups responsible for Pb(II) uptake, while acidic pretreatments resulted in degeneration of the most of functional groups on biosorbent cell wall. FTIR analysis confirmed the involvement of amino, carboxylic, phosphate and carbonyl groups in Pb(II) biosorption by fish scales.

Borosilicate glasses modified with organic ligands: a new selective approach for the removal of uranyl ion

Barium borosilicate glass was found to have high uptake capacity for many cations. To improve its selectivity, surface modification was carried out. In order to make the glass selective towards uranyl ion, organic ligands like tri-n-octylphosphine oxide (TOPO) and 8-hydroxy quinoline (Oxine) were used. It was observed that the surface modification resulted in the change in uptake property of the glass. The uptake process was faster and within 5 h, 90% of the uranyl ion could be taken up from a 0.01 mM solution. With use of the modified barium borosilicate glass and EDTA as masking agent, uranyl ion could be selectively removed from mixtures of cations.

Biosorption of Pb(II) and Cr(III) from aqueous solution by lichen (Parmelina tiliaceae) biomass

The biosorption characteristics of Pb(II) and Cr(III) ions from aqueous solution using the lichen (Parmelina tiliaceae) biomass were investigated. Optimum biosorption conditions were determined as a function of pH, biomass dosage, contact time, and temperature. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the biosorption isotherm of the metal ions by P. tiliaceae biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The monolayer biosorption capacity of P. tiliaceae biomass for Pb(II) and Cr(III) ions was found to be 75.8 mg/g and 52.1mg/g, respectively. From the D-R isotherm model, the mean free energy was calculated as 12.7 kJ/mol for Pb(II) biosorption and 10.5 kJ/mol for Cr(III) biosorption, indicating that the biosorption of both metal ions was taken place by chemical ion-exchange. The calculated thermodynamic parameters (delta G degrees , delta H degrees and delta S degrees ) showed that the biosorption of Pb(II) and Cr(III) ions onto P. tiliaceae biomass was feasible, spontaneous and exothermic under examined conditions. Experimental data were also tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of both metal ions followed well pseudo-second-order kinetics.