13C NMR study of the effect of aerobic treatment of olive mill wastewater (OMW) on its lipid-free content

Identifying sources and distribution of organic pollutants in a Moroccan river: Characterization of dissolved organic matter by absorption, excitation-emission fluorescence and chemometric analyses

This study investigates surface water contamination of Ben-Kazza River in Morocco, fed by effluents from an adjacent lagoon-based wastewater treatment plant (WWTP) and seasonally by industrial effluents, and which occasionally serves to irrigate agricultural fields. This study has two purpose: i) to track the main sources of contamination through the evolution of dissolved organic matter (DOM) characteristics along the watercourse, and ii) to characterize the WWTP influents and effluents with a focus on the efficiency of the lagoon treatment. We characterized a total of 495 water samples across the watercourse and from the inlet and outlet of the WWTP, using UV-visible absorption and excitation-emission fluorescence coupled with chemometric analyses. Absorption indicators and fluorescence indices were calculated and compared across sampling points. Results highlight spatial shifts together with temporal changes in DOM. PARAFAC identified components that varied between protein-like, humic-like and anthropogenic-like fluorophores along the river, permitted to trace the anthropogenic components and their sources. The lagoon treatment appeared to better remove fresh organic material than humic material: fluorescence intensity decreased by 68 % for peak T1 and by 22 % for peak C. Maximum fluorescence intensities (Fmax) decreased across all PARAFAC components, leading to more than 55 % reduction of ΣFmax.

Aqueous-Phase Reforming of Biogas Slurry over MOF-Derived α-MoO3 Catalyst for Producing Renewable Hydrogen: Effect of Fermenting Time

Aqueous-phase reforming (APR) is an alternative method for treating and utilizing biogas slurry (BS) to produce renewable hydrogen from organic oxygen-containing wastewater. Considering the fluctuating characteristics of BS with changes in the degree of fermentation, developing an efficient catalyst is a major concern for the APR of BS. The novel catalyst based on molybdenum-based metal-organic-framework-derived oxides (Mo-MOF-derived α-MoO3) was reported in this study. The results indicated that the variables (e.g., pH, organic load, and salinity) of BS corresponded to the fermentation times and exhibited decreasing trends after APR under the reaction conditions of 225 °C and 30 min. Decarboxylation was identified as the main side reaction in the APR of BS over the catalyst. An optimal yield of 2.17 mLhydrogen/mLBS was achieved when BS was obtained from 6 days of fermentation. Finally, the Mo-MOF-derived α-MoO3 catalyst was obtained from the greater specific surface area of MOFs. The catalyst had a weaker acidity than the initial α-MoO3, making it more preferred for facilitating the APR of BS.

NMR spectroscopy of wastewater: A review, case study, and future potential

NMR spectroscopy is arguably the most powerful tool for the study of molecular structures and interactions, and is increasingly being applied to environmental research, such as the study of wastewater. With over 97% of the planet's water being saltwater, and two thirds of freshwater being frozen in the ice caps and glaciers, there is a significant need to maintain and reuse the remaining 1%, which is a precious resource, critical to the sustainability of most life on Earth. Sanitation and reutilization of wastewater is an important method of water conservation, especially in arid regions, making the understanding of wastewater itself, and of its treatment processes, a highly relevant area of environmental research. Here, the benefits, challenges and subtleties of using NMR spectroscopy for the analysis of wastewater are considered. First, the techniques available to overcome the specific challenges arising from the nature of wastewater (which is a complex and dilute matrix), including an examination of sample preparation and NMR techniques (such as solvent suppression), in both the solid and solution states, are discussed. Then, the arsenal of available NMR techniques for both structure elucidation (e.g., heteronuclear, multidimensional NMR, homonuclear scalar coupling-based experiments) and the study of intermolecular interactions (e.g., diffusion, nuclear Overhauser and saturation transfer-based techniques) in wastewater are examined. Examples of wastewater NMR studies from the literature are reviewed and potential areas for future research are identified. Organized by nucleus, this review includes the common heteronuclei (¹³C, ¹⁵N, ¹⁹F, ³¹P, ²⁹Si) as well as other environmentally relevant nuclei and metals such as ²⁷Al, ⁵¹V, ²⁰⁷Pb and ¹¹³Cd, among others. Further, the potential of additional NMR methods such as comprehensive multiphase NMR, NMR microscopy and hyphenated techniques (for example, LC-SPE-NMR-MS) for advancing the current understanding of wastewater are discussed. In addition, a case study that combines natural abundance (i.e. non-concentrated), targeted and non-targeted NMR to characterize wastewater, along with in vivo based NMR to understand its toxicity, is included. The study demonstrates that, when applied comprehensively, NMR can provide unique insights into not just the structure, but also potential impacts, of wastewater and wastewater treatment processes. Finally, low-field NMR, which holds considerable future potential for on-site wastewater monitoring, is briefly discussed. In summary, NMR spectroscopy is one of the most versatile tools in modern science, with abilities to study all phases (gases, liquids, gels and solids), chemical structures, interactions, interfaces, toxicity and much more. The authors hope this review will inspire more scientists to embrace NMR, given its huge potential for both wastewater analysis in particular and environmental research in general.

Olive Mill Wastes: A Source of Bioactive Molecules for Plant Growth and Protection against Pathogens

Simple Summary

Olive oil is the most common vegetable oil used for human nutrition, and its production represents a major economic sector in Mediterranean countries. The milling industry generates large amounts of liquid and solid residues, whose disposal is complicated and costly due to their polluting properties. However, olive mill waste (OMW) may also be seen as a source of valuable biomolecules including plant nutrients, anthocyanins, flavonoids, polysaccharides, and phenolic compounds. This review describes recent advances and multidisciplinary approaches in the identification and isolation of valuable natural OMW-derived bioactive molecules. Such natural compounds may be potentially used in numerous sustainable applications in agriculture such as fertilizers, biostimulants, and biopesticides in alternative to synthetic substances that have a negative impact on the environment and are harmful to human health.

Abstract

Olive oil production generates high amounts of liquid and solid wastes. For a long time, such complex matrices were considered only as an environmental issue, due to their polluting properties. On the other hand, olive mill wastes (OMWs) exert a positive effect on plant growth when applied to soil due to the high content of organic matter and mineral nutrients. Moreover, OMWs also exhibit antimicrobial activity and protective properties against plant pathogens possibly due to the presence of bioactive molecules including phenols and polysaccharides. This review covers the recent advances made in the identification, isolation, and characterization of OMW-derived bioactive molecules able to influence important plant processes such as plant growth and defend against pathogens. Such studies are relevant from different points of view. First, basic research in plant biology may benefit from the isolation and characterization of new biomolecules to be potentially applied in crop growth and protection against diseases. Moreover, the valorization of waste materials is necessary for the development of a circular economy, which is foreseen to drive the future development of a more sustainable agriculture.

Treatment of olive mill wastewater by photooxidation with ZrO2-doped TiO2 nanocomposite and its reuse capability

Zirconium dioxide (zirconia, ZrO2)-doped TiO2 (TiO2/ZrO2) nanocomposite was used for the photocatalytic oxidation of pollutant parameters [COD components (CODtotal, CODdissolved and CODinert)], polyphenols (catechol, 3-hydroxybenzoic acid, tyrosol and 4-hydroxybenzoic acid) and total polyaromatic amines [aniline, 4-nitroaniline, o-toluidine and o-anisidine] from the olive mill effluent wastewaters at different operational conditions such as at different mass ratios of ZrO2 (50, 25, 14, 10 and 5 wt%) in the TiO2/ZrO2 nanocomposite, at different TiO2/ZrO2 photocatalyst concentrations (1, 4, 15 and 50 mg/L) and pH values (4.0-7.0-10.0) under 300 W UV irradiations, respectively. Under the optimized conditions (pH = 4.6, 15 mg/L ZrO2/TiO2 nanocomposite with a ZrO2 mass ratio of 14 wt%, 300 W UV light, after 60 min photooxidation time, at 21°C), the maximum CODdissolved, total phenol and total aromatic amines photooxidation yields were 99%, 89% and 95%, respectively. High pollutant removal (89%) yields after sequential five times utilization of ZrO2/TiO2 nanocomposite show that this catalyst can be effectively used commercially in the treatment of olive mill effluent.

Advancements in waste water characterization through NMR spectroscopy: review

There are numerous organic pollutants that lead to several types of ecosystem damage and threaten human health. Wastewater treatment plants are responsible for the removal of natural and anthropogenic pollutants from the sewage, and because of this function, they play an important role in the protection of human health and the environment. Nuclear magnetic resonance (NMR) has proven to be a valuable analytical tool as a result of its versatility in characterizing both overall chemical composition as well as individual species in a wide range of mixtures. In addition, NMR can provide physical information (rigidity, dynamics, etc.) as well as permit in depth quantification. Hyphenation with other techniques such as liquid chromatography, solid phase extraction and mass spectrometry creates unprecedented capabilities for the identification of novel and unknown chemical species. Thus, NMR is widely used in the study of different components of wastewater, such as complex organic matter (fulvic and humic acids), sludge and wastewater. This review article summarizes the NMR spectroscopy methods applied in studies of organic pollutants from wastewater to provide an exhaustive review of the literature as well as a guide for readers interested in this topic.

Dynamic changes in composition of extracts of natural products as monitored by in situ NMR

The direct in situ NMR observation and quantification, based on the aldehyde -CH chemical shift region, of the inter-conversion of secoiridoid derivatives due to temperature and solvent effects is demonstrated in complex extracts of natural products without prior isolation of the individual components. The equilibrium between the aldehyde hydrate form and the dialdehyde form of the oleuropein aglycon of an olive leaf aqueous extract in D(2)O was shown to be temperature dependent. The resulting thermodynamic values of the Van't Hoff plot with ΔH(o)  = -26.34 ± 1.00 kJ mol(-1) and TΔS° (298 K) = -24.70 ± 1.00 kJ mol(-1) demonstrate a significant entropy term which nearly compensates the effect of enthalpy at room temperature. The equilibrium between the two diastereomeric hemiacetal forms and the dialdehyde form of the oleuropein 6-O-β-d-glucopyranoside aglycon of an olive leaf aqueous extract in CD(3) OD was also shown to be strongly temperature dependent again because of the significant entropy term (TΔS° (298 K) = -26.50 ± 1.39 kJ mol(-1)) compared with that of the enthalpy term (ΔH(o)  = -36.64 ± 1.46 kJ mol(-1)). This is the first demonstration of the significant role of the entropy parameter in determining the equilibrium of chemical transformations in complex mixtures of natural products due to solvent and temperature effects.

Dephenolization, dearomatization and detoxification of olive mill wastewater with sonication combined with additives and radical scavengers

In this study, the effects of some additives [manganese (III) oxide (Mn3O4), Cu(+2), Fe(0) and potassium iodate (KIO3)] and some radical scavengers [sodium carbonate (Na2CO3), perfluorohexane (C6F14) and t-butyl alcohol (C4H10O)] on the sonication of olive mill effluent wastewater (OMW) were investigated since the wastewaters of this industry are removed with low efficiencies. The maximum total phenol and total aromatic amines (TAAs) removal efficiencies were 88% and 79%, respectively, at 60°C with only 150 min sonication. The maximum phenol removal was found as 98% with 19 mg L(-1) perfluorohexane and 5 mg L(-1) Fe(0) while the maximum TAAs removal was 99% with 16 mg L(-1) KIO3. Catechol, tyrosol, quercetin, caffeic acid, 4-methyl catechol, 2-phenylphenol (2-PHE) and 3-phenyl phenol (3-PHE) were detected as phenol intermediates while trimethlyaniline, aniline, o-toluidine, o-anisidine, dimethylaniline, ethylbenzene and durene were identified as TAAs in the OMW. The maximum acute toxicity removals were 96% and 99% in Vibrio fischeri and Daphnia magna, respectively. Total phenol, TAAs and the toxicity in an OMW were removed efficiently and cost-effectively through sonication.

Biodegradation of organic compounds during co-composting of olive oil mill waste and municipal solid waste with added rock phosphate

Liquid and solid olive oil mill waste was treated by com posting in a mixture with the organic part of municipal solid waste and rock phosphate. The transformations that occurred during the process were evaluated by physical, chemical and spectroscopic analyses. After five months of com posting, the final compost presented a C/N ratio under 20, an NH4+/NO3(-)] ratio under 1 and a pH around neutral. A high level of organic matter decomposition paralleled a notable abatement of phenols and lipids. The results show the effective dissolution of mineral elements during composting. This transformation was followed by Fourier transform infrared which showed a decrease in the absorption bands of aliphatic bonds (2925 and 2855 cm(-1)) and carbonyls of carboxylic origin (1740 cm (-1)). In addition to the increase in humic substances and the improvement of germination indices, the parameters studied confirm the stability and the maturity of the composts. The absence of phytotoxicity opens the way to agricultural spreading.

Electrochemical treatment of olive mill wastewater: treatment extent and effluent phenolic compounds monitoring using some uncommon analytical tools

Problems related with industrials effluents can be divided in two parts: (1) their toxicity associated to their chemical content which should be removed before discharging the wastewater into the receptor media; (2) and the second part is linked to the difficulties of pollution characterisation and monitoring caused by the complexity of these matrixes. This investigation deals with these two aspects, an electrochemical treatment method of an olive mill wastewater (OMW) under platinized expanded titanium electrodes using a modified Grignard reactor for toxicity removal as well as the exploration of the use of some specific analytical tools to monitor effluent phenolic compounds elimination. The results showed that electrochemical oxidation is able to remove/mitigate the OMW pollution. Indeed, 87% of OMW color was removed and all aromatic compounds were disappeared from the solution by anodic oxidation. Moreover, 55% of the chemical oxygen demand (COD) and the total organic carbon (TOC) were reduced. On the other hand, UV-Visible spectrophotometry, Gaz chromatography/mass spectrometry, cyclic voltammetry and 13C Nuclear Magnetic Resonance (NMR) showed that the used treatment seems efficaciously to eliminate phenolic compounds from OMW. It was concluded that electrochemical oxidation in a modified Grignard reactor is a promising process for the destruction of all phenolic compounds present in OMW. Among the monitoring analytical tools applied, cyclic voltammetry and 13C NMR a re among th e techniques that are introduced for thefirst time to control the advancement of the OMW treatment and gave a close insight on polyphenols disappearance.