Isolation of Streptomyces sp. strain capable of butyltin compounds degradation with high efficiency

Toxicity of organotin compounds and the ecological risk of organic tin with co-existing contaminants in aquatic organisms

Although organotin (OT) use is restricted worldwide, with the development of industry and agriculture, a large amount of OT is still discharged into aquatic environments. These OTs may interact with other pollutants that cause adverse biological effects (through bioaccumulation and/or toxicity), resulting in combined toxicity. Most research on OTs have focused on the exposure of a single analyte. Information on the toxicity of OTs and coexisting pollutants is quite limited, but is developing rapidly. This is the first review paper evaluating the current state of knowledge on the combined effects of OTs with co-pollutants. This paper reviews 1) the degradation of organotin; and 2) the combined toxicity of OTs and emerging pollutants (EP), heavy metals, and organic pollutants. Future research needs are discussed to better understand the risks associated with co-exposure to OT pollutants.

Elimination and detoxification of 2,4-D by Umbelopsis isabellina with the involvement of cytochrome P450

The chemical 2,4-dichlorophenoxyacetic acid (2,4-D) is used in agriculture as a herbicide. Its intensive use has an adverse effect on the environment. This study involved examining the degradation of 2,4-D compound by the filamentous fungus Umbelopsis isabellina. After 5 days of incubation, 98% of the herbicide (added at 25 mg L^-1) was found to be removed. The elimination of 2,4-D by U. isabellina was connected with the formation of 2,4-dichlorophenol (2,4-DCP), which resulted in a 60% decrease in the sample toxicity toward Artemia franciscana larvae. The metabolism of 2,4-D was inhibited by the addition of metyrapone, a known cytochrome P450 inhibitor. It provides evidence that cytochrome P450 system is involved in 2,4-D metabolism in U. isabellina.

Estrogen-mediated protection of the organotin-degrading strain Metarhizium robertsii against oxidative stress promoted by monobutyltin

Dibutyltin (DBT) is a global pollutant characterized by pro-oxidative properties. The fungal strain Metarhizium robertsii can eliminate high levels of DBT efficiently. In this study, induction of oxidative stress as well as its alleviation through the application of natural estrogens during the elimination of DBT by M. robertsii were evaluated. During the first 24 h of incubation, the initial concentration of DBT (20 mg l^-1) was reduced to 3.1 mg l^-1, with simultaneous formation of a major byproduct - monobutyltin (MBT). In the presence of estrone (E1) or 17β-estradiol (E2), the amounts of dibutyltin residues in the fungal cultures were found to be approximately 2-fold higher compared to cultures without estrogens, which was associated with the simultaneous utilization of the compounds by cytochrome P450 enzymes. On the other hand, MBT levels were approximately 2.5 times lower in the fungal cultures with the addition of one of the estrogens. MBT (not DBT) promotes the generation of O₂^-, H₂O₂, and NO at levels 65.89 ± 18.08, 4.04 ± 3.62, and 27.92 ± 1.95, respectively. Superoxide dismutase and catalase activities did not show any response of the M. robertsii strain against the overproduction of superoxide anion and hydrogen peroxide. Application of E1 as well as E2 ensured non-enzymatic defense against nitrosative and oxidative stress through scavenging of nitrogen and oxygen reactive species, and limited their levels from 1.5-fold to 21-fold, depending on the used estrogen.

Efficient dibutyltin (DBT) elimination by the microscopic fungus Metarhizium robertsii under conditions of intensive aeration and ascorbic acid supplementation

Dibutyltin (DBT) is an environmental pollutant characterized by immunotoxic, neurotoxic, and pro-oxidant properties. In this study, an attempt was made to enhance DBT elimination by the Metarhizium robertsii strain. We observed enhanced fungal growth in the bioreactor (pO₂ ≥ 20%) compared to flask cultures (μ _max increased from 0.061 to 0.086 h^-1). Moreover, under aerated conditions, M. robertsii mycelium with "hairy" morphology biodegraded DBT (20 mg l^-1) 10-fold faster in the bioreactor than in the flask cultures. Monobutyltin (MBT) and a hydroxylated derivative of MBT (OHBuSnH₂) were detected as by-products of dibutyltin debutylation. Simultaneous usage of glucose and butyltins indicates the comatabolic nature of monobutyltin and dibutyltin removal. In order to protect fungal cells from oxidative stress caused by DBT presence, vitamin C (20 mg l^-1) was applied. Supplementation with ascorbic acid (AA) resulted in a 3-fold acceleration of MBT removal during the first 7 h of incubation. Using the HPLC-MS/MS technique, a quantitative analysis of malondialdehyde (MDA), a marker of oxidative stress, was performed. In the AA presence, a decrease in the MDA amount (about 45%) was observed compared to the case with fungal cells exposed to DBT alone.

Biosorption and biodegradation of triphenyltin by Stenotrophomonas maltophilia and their influence on cellular metabolism

Triphenyltin (TPT), an endocrine disruptor, is polluting the global environment through its worldwide use. However, information concerning the mechanisms of TPT biodegradation and cellular metabolism is severely limited. Therefore, these processes were elucidated through experiments involving TPT biosorption and degradation, intracellular metabolite analysis, nutrient use, ion and monosaccharide release, cellular membrane permeability and protein concentration quantification. The results verified that TPT was initially adsorbed by the cell surface of Stenotrophomonas maltophilia and was subsequently transported and degraded intracellularly with diphenyltin and monophenyltin production. Cl(-), Na(+), arabinose and glucose release, membrane permeability and the extracellular protein concentration increased during TPT treatment, whereas K(+) and PO4(3-) utilization and intracellular protein concentration declined. The biosorption, degradation and removal efficiencies of TPT at 0.5mgL(-1) by 0.3gL(-1) viable cells at 10 d were 3.8, 77.8 and 86.2%, respectively, and the adsorption efficiency by inactivated cells was 72.6%.

Butyltins degradation by Cunninghamella elegans and Cochliobolus lunatus co-culture

Organotin compounds are ubiquitous in environment. However, biodegradation of tributyltin (TBT) and dibutyltin (DBT) to non toxic metabolites by fungi has been seldom observed. In this study we constructed a fungal co-culture with an efficient ability of TBT and its metabolites removal. The microscopic fungus strain Cunninghamella elegans degraded TBT via hydroxybutyldibutyltin (OHBuDBT) to its metabolites: DBT and monobutyltin (MBT), which were then transformed by Cochliobolus lunatus. The sequential biodegradation resulted in a 10-fold decrease in samples toxicity to Artemia franciscana larvae. With an initial TBT concentration of 5 mg l(-1), the co-culture of both fungi almost completely eliminated butyltins during 12 days of incubation in synthetic medium. To our knowledge, this is the first report that the mixed fungal co-culture could efficiently degrade TBT. This process was associated with glucose utilization, and a cometabolic nature of butyltins removal by selected strains has been suggested.

Biodegradation of polyether-polyol-based polyurethane elastomeric films: influence of partial replacement of polyether polyol by biopolymers of renewable origin

In this work we investigated the degradation process ofpolyether-polyol-based polyurethane (PUR) elastomeric films in the presence of a mixed thermophilic culture as a model of a natural bacterial consortium. The presence of PUR material in cultivation medium resulted in delayed but intensive growth of the bacterial culture. The unusually long lag phase was caused by the release of unreacted polyether polyol and tin catalyst from the material. The lag phase was significantly shortened and the biodegradability of PUR materials was enhanced by partial replacement (10%) of polyether polyol with biopolymers (carboxymethyl cellulose, hydroxyethyl cellulose, acetyl cellulose and actylated starch). The process of material degradation consisted of two steps. First, the materials were mechanically disrupted and, second, the bacterial culture was able to utilize abiotic degradation products, which resulted in supported bacterial growth. Direct utilization of PUR by the bacterial culture was observed as well, but the bacterial culture contributed only slightly to the total mass losses. The only exception was PUR material modified by acetyl cellulose. In this case, direct biodegradation represented the major mechanism of material decomposition. Moreover, PUR material modified by acetyl cellulose did not tend to undergo abiotic degradation. In conclusion, the modification of PUR by proper biopolymers is a promising strategy for reducing potential negative effects of waste PUR materials on the environment and enhancing their biodegradability.