Combined effects of Cu, Cd, Pb, and Zn on the growth and uptake of consortium of Cu-resistant Penicillium sp. A1 and Cd-resistant Fusarium sp. A19

Redox conditions and biochar pyrolysis temperature affecting As and Pb biogeochemical cycles and bacterial community of sediment from mining tailings

Despite the widespread use of biochar for soil and sediment remediation, little is known about the impact of pyrolysis temperature on the biogeochemistry of arsenic (As) and lead (Pb) and microorganisms in sediment under reducing conditions. In this study, we investigated the effects of pyrolysis temperature and the addition of glucose on the release and transformation of As and Pb, as well as their potential effects on the bacterial community in contaminated sediments. The addition of biochar altered the geochemical cycle of As, as it favors specific bacterial groups capable of changing species from As(V) to As(III) through fermentation, sulfate respiration and nitrate reduction. The carbon quality and content of N and S in solution shaped the pH and redox potential in a way that changed the microbial community, favoring Firmicutes and reducing Proteobacteria. This change played a fundamental role in the reductive dissolution of As and Pb minerals. The addition of biochar was the only efficient way to remove Pb, possibly as a function of its sorption and precipitation mechanisms. Such insights could contribute to the production or choice of high-efficiency biochar for the remediation of sediments subjected to redox conditions.

Insights into the shift of microbial community related to nitrogen cycle, especially N2O in vanadium-polluted soil

Soil is a vital contributor to the production of nitrous oxide (N₂O), a potent greenhouse gas, through the nitrogen cycle, which can be influenced by accumulated vanadium (V) in soil but it is less pronounced. This work investigated the response of soil N₂O fluxes along with major nitrogen cycle products (ammonium, nitrate, and nitrite) to different vanadium contents (0, 200, 500, 800, and 1100 mg V/kg), and the underlying microbial mechanisms. N₂O fluxes was significantly influenced at high V content (1100 mg V/kg) due to its corresponding high water-soluble V content. Microbial composition and their correlations with nitrogen cycle products showed that microbes in dominant phyla (Actinobacteriota and Proteobacteria) and genus (Nocardioides, Lysobacter, Sphingomonas, and Marmoricola) might be the important contributor to N₂O fluxes regardless of the V content. Moreover, high V contents (800, and 1100 mg V/kg) could enrich microbes involved in nitrogen cycle, but weaken their correlations with nitrogen-related products, such as in genus Bacillus, and change microbial correlation with N₂O from associated with nitrate and nitrite to ammonium. Meanwhile, functional gene predication results showed that denitrifying genes nirKS and nosZ were negatively and positively correlated with V contents, respectively. These all further suggested that the shift of possible N₂O metabolic pathways induced mainly by water-soluble V might be the underlying reason for N₂O fluxes. These findings promote an understanding of the potential effect of metal pollution on N₂O fluxes in soil.

Isotherm and kinetic studies of cadmium biosorption and its adsorption behaviour in multi-metals solution using dead and immobilized archaeal cells

It is crucial to identify more biological adsorbents that can efficiently uptake metals from wastewater. Dry haloalkaliphilic archaea Natronolimnobius innermongolicuswas evaluated for Cd ions biosorption. The optimal operating conditions (pH, biomass dose, initial metal concentration, contact time, and isotherms models) were tested. Biosorption process is influenced by the metal's solution pH with maximum removal of 83.36% being achieved at pH 8. Cadmium ions uptake reaches equilibrium in about 5 min of biosorption process. The Langmuir model was determined to better fit the Cd(II) biosorption by dry archaea. The maximal uptake capacity (q_max) of Cd(II) was 128.21 mg/g. The effect of multi-component system on biosorption behaviour of Pb, Ni, Cu, Fe, and Cd ions by immobilized dried archaeal cells, dried archaeal cells, and dried bryozoa was studied using Plackett-Burman experimental design. The investigated biosorbents were effective at removing metals from contaminated systems, particularly for Fe, Pb, and Cd ions. Moreover, the interaction behaviour of these metals was antagonistic, synergistic, or non-interactive in multi-metals system. SEM, EDX, and FTIR spectra revealed changes in surface morphology of the biomass through the biosorption process. Finally, continuous adsorption experiment was done to examine the ability of immobilized biomass to adsorb metals from wastewater.

Bioremediation of organic/heavy metal contaminants by mixed cultures of microorganisms: A review

Although microbial remediation has been widely used in the bioremediation of various contaminants, in practical applications of biological remediation, pure cultures of microorganisms are seriously limited by their adaptability, efficiency, and capacity to handle multiple contaminants. Mixed cultures of microorganisms involve the symbiosis of two or more microorganisms. Such cultures exhibit a collection of the characteristics of each microorganism species or strain, showing enormous potential in the bioremediation of organic or heavy metal pollutants. The present review focuses on the mixed cultures of microorganisms, demonstrating its importance and summarizing the advantages of mixed cultures of microorganisms in bioremediation. Furthermore, the internal and external relations of mixed culture microorganisms were analyzed with respect to their involvement in the removal process to elucidate the underlying mechanisms.

Potential application of Fusarium fungal strains (Fusarium sp. FP, Arthrinium sp. FB, and Phoma sp. FR) for removal of Tl (I) ions from water

Water pollution caused by heavy metals poses a serious threat to the ecosystem and human health. Among the various treatment techniques for water remediation, adsorption is an efficient method due to its high capacity, low cost, and simplicity. Thallium (Tl) is highly toxic to mammals and its removal from water is gaining increasingly prominent attention. In this study, three fungal strains (Fusarium sp. FP, Arthrinium sp. FB, and Phoma sp. FR) were tested for removal of Tl (I) from aqueous solutions and showed excellent removal performance. The prepared inactive fungal strains were characterized by XRD, FT-IR, SEM, and XPS analyses. The effects of pH, contact time, biomass dosage, and reaction temperature on the removal efficiency of Tl (I) were systematically investigated. The results indicated that the adsorption isotherm data fit well with the Langmuir model, and the pseudo-second-order model was more consistent with the kinetic data description. The maximum adsorption capacity of the fungal strain (Fusarium sp. FP, Arthrinium sp. FB, and Phoma sp. FR) for Tl (I) was found to be 94.69 mg/g, 66.97 mg/g, and 52.98 mg/g, respectively. The thermodynamic data showed that the sorption process was spontaneous and endothermic. The present study showed that the inactive fungal strains could be a promising adsorbent material for Tl (I) removal.

Characterization of cadmium-tolerant endophytic fungi isolated from soybean (Glycine max) and barley (Hordeum vulgare)

Cadmium stress disrupts plant-microbial interactions and reduces plant growth and development. In plants, the tolerance to stress can be increased by inoculation with endophytic microorganisms. The aim of this study was to investigate the distribution of endophytic fungi in various plant organs of barley and soybean and evaluate their Cd removal ability. Two hundred fifty-three fungal strains were isolated from various organs of barley (Hordeum vulgare cv Arna) and soybean (Glycine max cv Almaty). The colonization rate ranged from 13.6% to 57.3% and was significantly higher in the roots. Ten genera were identified: Fusarium, Penicillium, Aspergillus, Metarhizium, Beauveria, Trichoderma, Rhodotorula, Cryptococcus, Aureobasidium and Metschnikowia. Twenty-three fungal strains have a Cd tolerance index from 0.24 to 1.12. Five strains (Beauveria bassiana T7, Beauveria bassiana T15, Rhodotorula mucilaginosa MK1, Rhodotorula mucilaginosa RH2, Metschnikowia pulcherrima MP2) with the highest level of Cd tolerance have minimum inhibitory concentrations from 290 to 2400 μg/ml. These fungi were able to remove Cd up to 59%. The bioaccumulation capacity ranged from 2.3 to 11.9 mg/g. Selected fungal strains could be considered as biological agents for their potential application in the bioremediation of contaminated sites.

Biofilm Formation, Production of Matrix Compounds and Biosorption of Copper, Nickel and Lead by Different Bacterial Strains

Bacterial biofilms play a key role in metal biosorption from wastewater. Recently, Enterobacter asburiae ENSD102, Enterobacter ludwigii ENSH201, Vitreoscilla sp. ENSG301, Acinetobacter lwoffii ENSG302, and Bacillus thuringiensis ENSW401 were shown to form air–liquid (AL) and solid–air–liquid (SAL) biofilms in a static condition at 28 and 37°C, respectively. However, how environmental and nutritional conditions affect biofilm formation; production of curli and cellulose; and biosorption of copper (Cu), nickel (Ni), and lead (Pb) by these bacteria have not been studied yet. In this study, E. asburiae ENSD102, E. ludwigii ENSH201, and B. thuringiensis ENSW401 developed the SAL biofilms at pH 8, while E. asburiae ENSD102 and Vitreoscilla sp. ENSG301 constructed the SAL biofilms at pH 4. However, all these strains produced AL biofilms at pH 7. In high osmolarity and ½-strength media, all these bacteria built fragile AL biofilms, while none of these strains generated the biofilms in anaerobic conditions. Congo red binding results showed that both environmental cues and bacterial strains played a vital role in curli and cellulose production. Calcofluor binding and spectrophotometric results revealed that all these bacterial strains produced significantly lesser amounts of cellulose at 37°C, pH 8, and in high osmotic conditions as compared to the regular media, at 28°C, and pH 7. Metal biosorption was drastically reduced in these bacteria at 37°C than at 28°C. Only Vitreoscilla sp. ENSG301 and B. thuringiensis ENSW401 completely removed (100%) Cu and Ni at an initial concentration of 12.5 mg l^–1, while all these bacteria totally removed (100%) Pb at concentrations of 12.5 and 25 mg l^–1 at pH 7 and 28°C. At an initial concentration of 100 mg l^–1, the removal of Cu (92.5 to 97.8%) and Pb (89.3 to 98.3%) was the highest at pH 6, while it was higher (84.7 to 93.9%) for Ni at pH 7. Fourier transform infrared spectroscopy results showed metal-unloaded biomass biofilms contained amino, hydroxyl, carboxyl, carbonyl, and phosphate groups. The peak positions of these groups were shifted responding to Cu, Ni, and Pb, suggesting biosorption of metals. Thus, these bacterial strains could be utilized to remove Cu, Ni, and Pb from aquatic environment.

Bioremediation of water contaminated with uranium using Penicillium piscarium

Penicillium piscarium can be indicated as promising in the treatment of sites contaminated with uranium. Thus, this research aimed to analyze the P. piscarium dead biomass in uranium biosorption. This fungus was previously isolated from a highly contaminated uranium mine located in Brazil. Biosorption tests were carried out at pH 3.5 and 5.5 in solutions contaminated with concentrations of 1 to 100 mg/L of uranium nitrate. Our results showed that the dead biomass of P. piscarium was able to remove between 93.2 and 97.5% uranium from solutions at pH 3.5, at the end of the experiment, the pH of the solution increased to values above 5.6. Regarding the experiments carried out in solutions with pH 5.5, the dead biomass of the fungus was also able to remove between 38 and 92% uranium from the solution, at the end of the experiment, the pH of the solution increased to levels above 6.5. The analysis of electron microscopy, Energy-dispersive spectroscopy, and X-ray fluorescence demonstrated the high concentration of uranium precipitated on the surface of the fungal biomass. These results were impressive and demonstrate that the dead biomass of P. piscarium can be an important alternative to conventional processes for treating water contaminated with heavy metals, and we hope that these ecofriendly, inexpensive, and effective technologies be encouraged for the safe discharge of water from industrial activities.

The improved methods of heavy metals removal by biosorbents: A review

For decades, a vast array of innovative biosorbents have been found out and used in the removal of heavy metals, including bacteria, algae and fungi, etc. Although extensive biological species have been tried as a biosorbent for heavy metals removal, for removal efficiency or economy efficiency limited, it has failed to make a substantial breakthrough in practical application. Thus, many improved methods based on biosorbents emerged. In this review, based on the literature and our research results, we highlight three types of novel methods for biosorbents removal of heavy metals: chemical modification of biosorbents; biomass and chemical materials combination; multiple biomass complex systems. We mainly focus on their configuration, biosorption performance, their creation method, regeneration/reuse, their application and development in the future. Through the comparative analysis of various methods, we think that intracellular autogenous nanomaterials may open up another window in biosorption of heavy metals area. At the same time, the combination of various treatment methods will be the development tendency of heavy metal pollution treatment in the future.

Assessment of lead tolerance in gamma exposed Aspergillus niger van Tieghem & Penicillium cyclopium Westling

Purpose: Present study deals with the role of gamma irradiation in modulating lead (Pb) tolerance of Aspergillus niger van Tieghem. and Penicillium cyclopium Westling. Materials and methods: After being exposed to gamma absorbed doses those fungal strains were subjected to heavy metal uptake efficacies and anti-oxidative study. Fourier Transform Infrared (FTIR) spectra and Scanning Electron Microscopic (SEM) studies were also evaluated. Result: Gamma exposed A. niger & P. cyclopium showed enhanced growth in terms of colony forming unit (CFU) and more Pb uptake efficacies compared to their un-irradiated counterparts. FTIR spectra illustrated the involvement of functional groups in Pb biosorption. SEM photographs revealed the structural deformities in both the fungal strains after being exposed to Pb and gamma. Upregulated anti-oxidative defense system (super oxide dismutase, catalase, total glutathione) in gamma exposed fungal groups are accountable for enhanced Pb tolerance and removal than that of their un-irradiated counterparts. Conclusion: The outcomes of this study exhibit a light towards a new step of heavy metal bioremediation.

Characterization of three Pb-resistant fungi and their potential Pb2+ ions adsorption capacities

Bioremediation is preferred in heavy metal remediation, and the high-performance microbe is of prime importance. In the present research, three Pb-resistant microbes were isolated and growth characteristics and adsorption capacities were evaluated. The results showed that R. oryzae SD-1, T. asperellum SD-5, and M. irregularis SD-8 can grow well under 100 mg L^-1 Pb²⁺ ions stress. There is a higher minimum inhibitory concentration (MIC) of Pb but lower MICs of Cd and Zn in T. asperellum SD-5. However, there were similar MICs of Cu among the three microbes. R. oryzae SD-1 exhibited a higher adsorption capacity and removal rate relative to the other two microbes under various Pb²⁺ ion levels. The Langmuir equation was fitted for the adsorption capacity of T. asperellum SD-5 and M. irregularis SD-8, and their maximum adsorption capacities were approximately 456.62 mg g^-1 and 93.62 mg g^-1. Moreover, the Elovich equation and the double constant equation can describe the adsorption process of Pb²⁺ ions in Pb-resistant microbes well. The strongest adsorption capacity under lower Pb²⁺ ion level was observed in M. irregularis SD-8, while the strongest adsorption capacities under higher Pb²⁺ ion levels were seen in R. oryzae SD-1 and T. asperellum SD-5. Therefore, three novel Pb-resistant microbes may be used as efficient, easily cultivated materials for Pb-contaminated soil remediation.

Biosorption optimization, characterization, immobilization and application of Gelidium amansii biomass for complete Pb2+ removal from aqueous solutions

Lead (Pb2+) is among the most toxic heavy metals even in low concentration and cause toxicity to human's health and other forms of life. It is released into the environment through different industrial activities. The biosorption of Pb2+ from aqueous solutions by biomass of commonly available, marine alga Gelidium amansii was studied. The effects of different variables on Pb2+ removal were estimated by a two-level Plackett-Burman factorial design to determine the most significant variables affecting Pb2+ removal % from aqueous solutions. Initial pH, Pb2+ concentration and temperature were the most significant factors affecting Pb2+ removal chosen for further optimization using rotatable central composite design. The maximum removal percentage (100%) of Pb2+ from aqueous solution by Gelidium amansii biomass was found under the optimum conditions: initial Pb2+ concentration of 200 mg/L, temperature 45 °C, pH 4.5, Gelidium amansii biomass of 1 g/L and contact time of 60 minutes at static condition. FTIR analysis of algal biomass revealed the presence of carbonyl, methylene, phosphate, carbonate and phenolic groups, which are involved in the Pb2+ ions biosorption process. SEM analysis demonstrates the ability of Gelidium amansii biomass to adsorb and removes Pb2+ from aqueous solution. EDS analysis shows the additional optical absorption peak corresponding to the Pb2+ which confirms the involvement of Gelidium amansii biomass in the adsorption of Pb2+ ions from aqueous solution. Immobilized Gelidium amansii biomass was effective in Pb2+ removal (100%) from aqueous solution at an initial concentration of 200 mg/L for 3 h. In conclusion, it is demonstrated that the red marine alga Gelidium amansii biomass is a promising, efficient, ecofriendly, cost-effective and biodegradable biosorbent for the removal of Pb2+ from the environment and wastewater effluents.

Cd resistant characterization of mutant strain irradiated by carbon-ion beam

Heavy metal pollution is harmful to the environment and to human health. Resistant strains can grow in adverse conditions and store heavy metals to reduce their damage. The Cd²⁺ resistant mutant strain C2, which was irradiated by the ¹²C⁶⁺ beams, can grow in Cd medium ranging from 20 to 100 mg L^-1 when compared with the original strain. Attempting to discern the cause of the resistance, the phenotype and antioxidant defense system were analyzed. SEM images showed that when exposed to Cd²⁺, gaps on the cell surface were filled with a complex granular compound. FT-IR demonstrated that the alcoholic hydroxyl group, amino, and amide groups combined with ions. Moreover, responses of antioxidant defense system were different in the Cd²⁺ groups. The expression of SOD peaked at 24 h in high concentrations of Cd²⁺; the content of GSH increased gradually and was significantly affected by cultivation time. The MDA and CAT had the strongest response to 20 mg L^-1 Cd²⁺, and the related metabolic pathway of CAT might play a key role in the resistance to high concentrations of Cd²⁺. The result indicated that the applicability of C2 could provide potential biotechnology for treatment of wastewaters and soils with Cd pollutions.

Myco-phytoremediation of arsenic- and lead-contaminated soils by Helianthus annuus and wood rot fungi, Trichoderma sp. isolated from decayed wood

In the present study, Helianthus annuus grown in arsenic- (As) and lead- (Pb) contaminated soil were treated with plant-growth promoting fungi Trichoderma sp. MG isolated from decayed wood and assessed for their phytoremediation efficiency. The isolate MG exhibited a high tolerance to As (650mg/L) and Pb (500mg/L), and could remove > 70% of metals in aqueous solution with an initial concentration of 100mg/L each. In addition, the isolate MG was screened for plant-growth-promoting factors such as siderophores, 1-aminocyclopropane-1-carboxylic acid (ACC) deaminase, indole acetic acid (IAA) synthesis, and phosphate solubilisation. Phytoremediation studies indicated that treatment of H. annuus with the isolate MG had the maximum metal-accumulation in shoots (As; 67%, Pb; 59%). Furthermore, a significant increase in the soil extracellular enzyme-activities was observed in myco-phytoremediated soils. The activities of phosphatase (35 U/g dry soil), dehydrogenase (41mg TPF/g soil), cellulase (37.2mg glucose/g/2h), urease (55.4mgN/g soil/2h), amylase (49.3mg glucose/g/2h) and invertase (45.3mg glucose/g/2h) significantly increased by 12%, 14%, 12%, 22%, 19% and 14% in As contaminated soil, respectively. Similarly, the activities of phosphatase (31.4U/g dry soil), dehydrogenase (39.3mg TPF/g soil), cellulase (37.1mg glucose/g/2h), urease (49.8mgN/g soil/2h), amylase (46.3mg glucose/g/2h), and invertase (42.1mg glucose/g/2h) significantly increased by 11%, 15%, 11%, 18%, 20% and 14% in Pb contaminated soil, respectively. Obtained results indicate that the isolate MG could be a potential strain for myco-phytoremediation of As and Pb contaminated soil.

Multiple heavy metal removal using an entomopathogenic fungi Beauveria bassiana

Towards the development of a potential remediation technology for multiple heavy metals [Zn(II), Cu(II), Cd(II), Cr(VI) and Ni(II)] from contaminated water, present study examined the growth kinetics and heavy metal removal ability of Beauveria bassiana in individual and multi metals. The specific growth rate of B. bassiana varied from 0.025h(-1) to 0.039h(-1) in presence of individual/multi heavy metals. FTIR analysis indicated the involvement of different surface functional groups in biosorption of different metals, while cellular changes in fungus was reflected by various microscopic (SEM, AFM and TEM) analysis. TEM studies proved removal of heavy metals via sorption and accumulation processes, whereas AFM studies revealed increase in cell surface roughness in fungal cells exposed to heavy metals. Present study delivers first report on the mechanism of bioremediation of heavy metals when present individually as well as multi metal mixture by entomopathogenic fungi.

Biosorption and bioaccumulation of thallium by thallium-tolerant fungal isolates

Little is known about the biosorption and bioaccumulation capacity of thallium (Tl) by microorganisms that occur in Tl-polluted soil. The present study focused on characterizing the biosorption and bioaccumulation of Tl by Tl-tolerant fungi isolated from Tl-polluted soils. Preliminary data showed a positive correlation between the biomass and the biosorbed Tl content. The Tl-tolerant strains were capable of bioaccumulating Tl, up to 7189 mg kg(-1) dry weight. The subcellular distribution of Tl showed obvious compartmentalization: cytoplasm ≫ cell wall > organelle. The majority of Tl (up to 79%) was found in the cytoplasm, suggesting that intracellular compartmentalization appeared to be responsible for detoxification. These findings further suggest the applicability of the fungal isolates for cleanup of Tl in Tl-polluted water and soil.

Phytohormones enabled endophytic fungal symbiosis improve aluminum phytoextraction in tolerant Solanum lycopersicum: An examples of Penicillium janthinellum LK5 and comparison with exogenous GA3

This work investigates the potentials of fungal-endophyte Penicillium janthinellum LK5 (PjLK5) and its inherent gibberellic acid (GA3) as reference to enhance aluminum (Al) induced toxicity in tolerant tomato (Solanum lycopersicum) plants. Initial screening showed significantly higher uptake of Al by PjLK5. Aluminum stress (100 μM) significantly retarted plant growth in control plants. Conversely PjLK5 and GA3 application significantly increased morphological attributes of Al-tolerant tomato plants with or without Al-stress. PjLK5 inoculation with and without Al-stress maintained the plant growth whilst extracting and translocating higher Al in shoot (∼ 1 92 mg/kg) and root (∼ 296 mg/kg). This was almost similar in GA3 treatments as well. In addition, PjLK5 inoculation extended protective effects to tomato plants by maintaining reduced cellular superoxide anions in Al stress. Al-induced oxidative stress was further reduced due to significantly higher activity of metal-responsive reduced glutathione. The functional membrane was less damaged in PjLK5 and GA3 treatments because the plants synthesized reduced levels of malondialdhyde, lenolenic and linoleic acids. Defense-related endogenous phytohormone salicylic acid was significantly up-regulated to counteract the adverse effects of Al-stress. In conclusion, the PjLK5 possess a similar bio-prospective potential as of GA3. Application of such biochemically active endophyte could increase metal phytoextraction whilst maintaining crop physiological homeostasis.

Characterization of cadmium-resistant endophytic fungi from Salix variegata Franch. in Three Gorges Reservoir Region, China

The community and Cd-resistance of endophytic fungi from roots of Salix variegata Franch. collected from the water-level-fluctuation zone of Three Gorges Reservoir Region, China, were investigated. A total of 53 strains were isolated and identified to 13 morphotaxa, in which Chromosporium, Fusarium and Gonatobotrys were dominant genera. Among them, 27 isolates were selected to measure their resistance to 0.02 mg ml(-1) Cd(2+) and 11 were growth stimulated (Tolerance index>100%). Of these active isolates, four dark septate endophyte (DSE) isolates (Paraphaeosphaeria sp. SR46, Pyrenochaeta sp. SR35, Rhizopycnis vagum SR37 and R. vagum SR44) were further tested for minimum inhibitory concentrations (MICs) against Cd and SR46 was found to be the most tolerant isolate with MIC of 0.39 mg ml(-1). Additionally, the maximum uptake values of these DSEs ranged from 3.01 to 7.89 mg g(-1), but there was no significant correlation between metal uptake with fungal biomass and metal tolerance. Subsequently, a pot experiment was conducted for investigating the impact of SR46 on corn seedlings in Cd-enriched soil. The results obtained suggested that SR46 reduced the Cd bioaccumulation of plant under low (100 mg kg(-1)) Cd stress and enhanced the Cd translocation from root zone to aerial parts under high (200 mg kg(-1)) Cd stress. Besides, it promoted plant growth without Cd stress. These findings indicated S. variegata harbors an endophytic fungal flora showing a high genetic diversity as well as a high level of metal resistance to Cd that has potential values in cadmium cycling and restoration of plant, soil and water system.

Highly cadmium tolerant fungi: their tolerance and removal potential

BACKGROUND

Soil and effluent of lead and zinc industries contain high concentration of cadmium. The present study was conducted to isolate tolerant fungal strains from cadmium -polluted sites in Zanjan province, Iran.

METHODS

Cadmium tolerance and bioremediation capacity of seven isolates including Aspergilus versicolor, Aspergillus fumigatus, Paecilomyces sp.9, Paecilomyces sp.G, Terichoderma sp, Microsporum sp,Cladosporium sp were determined.

RESULTS

Minimum inhibitory concentration values among 1,000-4,000 mg l-(1)proved great ability of isolated strains to survive in cadmium polluted environments. The most tolerant fungi, Aspergilus versicolor, showed tolerance index of 0.8 in 100 mg l-(1) cadmium agar media. Fungal resistance against cadmium is depended directly on strain's biological function. A. versicolor was found to bioaccumulate over7 mg of cadmium per 1 g of mycelium, followed by 5.878, 5.243, and 5.075, 4.557 by Paecilomyces sp, Aspergilus fumigatus, Microsporum sp and Terichoderma sp, respectively.

CONCLUSION

It can be noted that tolerance of the strains appears to be independent from bioaccumulation capacity. Finally, the results indicated that A. versicolor could be a prospective candidate for bioremediation processes.

Novel fungal consortium for bioremediation of metals and dyes from mixed waste stream

The present study is targeted towards development of a three member fungal consortium for effective removal of metals [Cr(6+) and Cu(2+)] and dyes [AB and PO] from mixed waste streams. Initial studies using individual fungal strain showed that Aspergillus lentulus was best for Cu(2+) and AB removal, Aspergillus terreus for Cr(6+) removal whereas, Rhizopus oryzae was best for PO removal. Based on the complementary pollutant affinities and positive interactions, a consortium comprising all three strains was developed. Consortium removed 100% Cr(6+) and 81.60% Cu(2+) from metal mixture which was significantly higher than that achieved individually by A. lentulus (Cr(6+): 83.11%; Cu(2+): 67.32%), A. terreus (Cr(6+): 95.57%; Cu(2+): 65.77%) or R. oryzae (Cr(6+): 25.34%; Cu(2+): 30.20%). Further, 98.0% AB and 100.0% PO was removed after 48 h by the consortia. Unlike individual strains, consortium's performance was unaltered irrespective of the complexity of metal-dye mixtures, thereby establishing its superiority.

Pb tolerance and bioaccumulation by the mycelia of Flammulina velutipes in artificial enrichment medium

Mushrooms have the ability to accumulate high concentrations of heavy metals, which gives them potential for use as bioremediators of environmental contamination. The Pb(2+) tolerance and accumulation ability of living mycelia of Flammulina velutipes were studied in this work. Mycelial growth was inhibited when exposed to 1 mM Pb(2+). The colony diameter on solid medium decreased almost 10% compared with the control. Growth decreased almost 50% when the Pb(2+) concentration increased to 4 mM in the medium, with the colony diameter decreasing from 80 mm to 43.4 mm, and dry biomass production in liquid cultures decreasing from 9.23±0.55 to 4.27±0.28 g/L. Lead ions were efficiently accumulated in the mycelia. The amount of Pb(2+) in the mycelia increased with increasing Pb(2+) concentration in the medium, with the maximum concentration up to 707±91.4 mg/kg dry weight. We also show evidence that a large amount of the Pb(2+) was adsorbed to the mycelial surface, which may indicate that an exclusion mechanism is involved in Pb tolerance. These results demonstrate that F. velutipes could be useful as a remediator of heavy metal contamination because of the characteristics of high tolerance to Pb(2+) and efficient accumulation of Pb(2+) ions by the mycelia.

Endophytic Penicillium funiculosum LHL06 secretes gibberellin that reprograms Glycine max L. growth during copper stress

BACKGROUND

Heavy metal pollution in crop fields is one of the major issues in sustainable agriculture production. To improve crop growth and reduce the toxic effects of metals is an ideal strategy. Understanding the resilience of gibberellins producing endophytic fungi associated with crop plants in metal contaminated agriculture fields could be an important step towards reducing agrochemical pollutions. In present study, it was aimed to screen and identify metal resistant endophyte and elucidate its role in rescuing crop plant growth and metabolism during metal stress.

RESULTS

Fungal endophyte, Penicillium funiculosum LHL06, was identified to possess higher growth rate in copper (Cu) and cadmium contaminated mediums as compared to other endophytes (Metarhizium anisopliae, Promicromonospora sp. and Exophiala sp.). P. funiculosum had high biosorption potential toward copper as compared to cadmium. An endophyte-metal-plant interaction was assessed by inoculating the host Glycine max L. plants with P. funiculosum during Cu (100 μM) stress. The Cu application adversely affected the biomass, chlorophyll and total protein content of non-inoculated control plants. The control plants unable to synthesis high carbon, hydrogen and nitrogen because the roots had lower access to phosphorous, potassium, sulphur and calcium during Cu treatment. Conversely, P. funiculosum-association significantly increased the plant biomass, root physiology and nutrients uptake to support higher carbon, hydrogen and nitrogen assimilation in shoot. The metal-removal potential of endophyte-inoculated plants was significantly higher than control as the endophyte-association mediated the Cu uptake via roots into shoots. The symbiosis rescued the host-plant growth by minimizing Cu-induced electrolytic leakage and lipid peroxidation while increasing reduces glutathione activities to avoid oxidative stress. P. funiculosum-association synthesized higher quantities of proline and glutamate as compared to control. Stress-responsive abscisic acid was significantly down-regulated in the plant-metal-microbe association.

CONCLUSION

The endophyte P. funiculosum symbiosis counteracted the Cu stress and reprogrammed soybean plant growth. Such growth promoting and stress mediating endophytes can be applied at field levels to help in bioremediation of the polluted agricultural fields.

Simultaneous bioaccumulation of multiple metals from electroplating effluent using Aspergillus lentulus

Toxic impacts of heavy metals in the environment have lead to intensive research on various methods of heavy metal remediation. However, in spite of abundant work on heavy metals removal from simple synthetic solutions, a very few studies demonstrate the potential of microbial strains for the treatment of industrial effluents containing mixtures of metals. In the present study, the efficiency of an environmental isolate (Aspergillus lentulusFJ172995), for simultaneous removal of chromium, copper and lead from a small-scale electroplating industry effluent was investigated. Initial studies with synthetic solutions infer that A. lentulus has a remarkable tolerance against Cr, Cu, Pb and Ni. During its growth, a significant bioaccumulation of individual metal was recorded. After 5 d of growth, the removal of metals from synthetic solutions followed the trend Pb(2+) (100%) > Cr(3+) (79%) > Cu(2+) (78%), > Ni(2+) (42%). When this strain was applied to the treatment of multiple metal containing electroplating effluent (after pH adjustment), the metal concentrations decreased by 71%, 56% and 100% for Cr, Cu and Pb, respectively within 11 d. Based on our results, we propose that the simultaneous removal of hazardous metals from industrial effluents can be accomplished using A. lentulus.

Compost as a source of microbial isolates for the bioremediation of heavy metals: in vitro selection

Heavy metal pollution has become a major environmental concern nowadays and the bioremediation of polluted habitats is an increasingly popular strategy due to both its efficiency and safety. A screening and selection protocol based on different composting processes was designed in order to isolate heavy metal-resistant microorganisms. A collection of 51 microorganisms was obtained and most of them showed the capability to tolerate heavy metals in multi-polluted aqueous systems (Cd(II), Cr(VI), Ni, Pb, Zn(II)), as well as to remove them. The highest detoxification ratios were observed for Pb. Some of the isolates detoxifying more than a 90% of this metal, while the other metals were removed in a range between 20% and 60%. The best isolates (Graphium putredinis, Fusarium solani, Fusarium sp. and Penicillium chrysogenum) were further assayed in order to determine the predominant removal mechanism and the potential use of their dead biomass as a biosorbent. Intracellular accumulation was the prevalent mechanism for most isolates and metals, with the exception of Ni. In this case, the proportion removed by extracellular adsorption was similar or even higher than that removed by intracellular accumulation. Thus, the efficiency of living cells was higher than that of dead biomass except in the case of Ni.

Adsorption of Cd(II) and Pb(II) onto a one step-synthesized polyampholyte: kinetics and equilibrium studies

A one step-synthesized polyampholyte, bearing carboxylate and 2-methylimidazole (2MI) groups, was tested as adsorbent for the removal of Pb(II) and Cd(II) from aqueous solutions. This material combines the benefits of synthetic polymers, such as high adsorption capacity and chemical stability, and the advantages of biosorbents in regard of costs and simplicity of the production. The short time needed to achieve the adsorption equilibrium indicated a chemical-reaction controlled process. A network expansion was predicted as a result of repulsive interaction between the fixed positive charges. Langmuir model presented the best fitting to isotherm equilibrium data, with a maximum adsorption capacity of 182 mg g(-1) for Cd(II) and 202 mg g(-1) for Pb(II). The metal removal was strongly dependent on pH, involving carboxylate and 2MI residues. An ion-exchange process for Pb(II) and Cd(II), combined with coordination for the later, were the most probable mechanism of interaction. The adsorption of 1.35 ppm Cd(II) was 72±6% in well-water, and the adsorption of 0.50 ppm Pb(II) was 62±5% in tap-water. The recovery figures for Cd(II) in 1% HNO(3) were optimal.

Reduction and Biosorption of Cr from Aqueous Solution Using Banana Skin

The possible use of biowaste-banana skin as an alternative, low-cost biosorbent and reductant for removal of Cr from aqueous solutions was investigated. Effects of pH, contact time, Cr(VI) initial concentration and temperature on the reduction and biosorption of Cr by banana skin were studied. Experimental results showed that 1 g of dried banana skin could reduce about 230 mg of Cr(VI) to Cr(III), at the condition of 30°C, pH 2 and 300 rpm. The maximum Qeq of Cr(III) by banana skin was 6.3mg g-1 at the Cr(VI) initial concentration of 200mg L-1, 30°C , pH 2 and 300 rpm.

The use of a white rot fungi (Pleurotus ostreatus) immobilized on Amberlite XAD-4 as a new biosorbent in trace metal determination

The present work proposes the use of Pleurotus ostreatus immobilized on Amberlite XAD-4 as new biosorbent in trace metal determination. The effects of experimental parameters, such as "pH and flow rate of sample solution, amount of solid phase, eluent type, and concentration" on the recovery of the metal ions were investigated. Maximum adsorption of Cr(III), Cd(II) and Cu(II) ions took place in the pH range 4-5. These metal ions can be desorbed with 1M HCl (recovery 95-100%). 0.2g adsorbent amount and 2.5 mL min(-1) flow rate was found to be optimum of all preconcentration experiments. The sorption capacity after 10 cycles of sorption and desorption does not vary more than 2.0%. The influences of the contaminant ions on the retentions of the analytes were also examined. The results showed that P. ostreatus immobilized on Amberlite XAD-4 can be considered as very promising material in trace metal determination.

The biosorption of heavy metals from aqueous solution by Spirogyra and Cladophora filamentous macroalgae

The aim of this research was to develop a low cost adsorbent for wastewater treatment. The prime objective of this study was to search for suitable freshwater filamentous algae that have a high heavy metal ion removal capability. This study evaluated the biosorption capacity from aqueous solutions of the green algae species, Spirogyra and Cladophora, for lead (Pb(II)) and copper (Cu(II)). In comparing the analysis of the Langmuir and Freundlich isotherm models, the adsorption of Pb(II) and Cu(II) by these two types of biosorbents showed a better fit with the Langmuir isotherm model. In the adsorption of heavy metal ions by these two types of biosorbents, chemical and physical adsorption of particle surfaces was perhaps more significant than diffusion and adsorption between particles. Continuous adsorption-desorption experiments discovered that both types of biomass were excellent biosorbents with potential for further development.

Characterization of Cd- and Pb-resistant fungal endophyte Mucor sp. CBRF59 isolated from rapes (Brassica chinensis) in a metal-contaminated soil

To better understand the characteristics of fungal endophytes in the development of effective phytoremediation of heavy metals, the objectives of this study were to isolate a fungal endophyte tolerant Cd and Pb from rape roots grown in a heavy metal-contaminated soil, to characterize the metal-resistant fungal endophyte, and to assess its potential applications in removal of Cd and Pb from contaminated solutions and experimental soil. The isolate CBRF59 was identified as Mucor sp. based on morphological characteristics and phylogenetic analysis. From a Cd solution of 2.0mM, the maximum biosorption capacity of Cd by dead biomass of Mucor sp. CBRF59 was 108 mg g(-1). Under the same conditions, the bioaccumulation capacity of Cd by active biomass of the strain was 173 mg g(-1). The bioaccumulation capacity of Pb by active biomass of the strain was significantly lower than that by dead biomass in the initial Pb concentrations from 1.0 to 2.0mM. The ratio of Pb to Cd and initial pH values in the mixed Cd+Pb solutions affected the bioaccumulation and biosorption capacities of the metals by CBRF59. The addition of the active mycelia of CBRF59 significantly increased the availability of soil Pb and Cd by 77% and 11.5-fold, respectively. The results showed that the endophytic fungus was potentially applicable for the decontamination of metal-polluted media.

Metallomics: lessons for metalliferous soil remediation

The term metallomics has been established for the investigation of transcriptome, proteome, and metabolome changes induced by metals. The mechanisms allowing the organisms to cope with metals in the environment, metal resistance factors, will in turn change biogeochemical cycles of metals in soil, coupling the metal pool with the root system of plants. This makes microorganisms key players in introducing metals into food webs, as well as for bioremediation strategies. Research on physiological and metabolic responses of microorganisms on metal stress in soil is thus essential for the selection of optimized consortia applicable in bioremediation strategies such as bioaugmentation or microbially enhanced phytoextraction. The results of metallomics studies will help to develop applications including identification of biomarkers for ecotoxicological studies, bioleaching, in situ soil regeneration, and microbially assisted phytoremediation of contaminated land. This review will therefore focus on the molecular understanding of metal resistance in bacteria and fungi, as can be derived from metallomics studies.