Sonochemical degradation of 2chloro-5methyl phenol assisted by TiO2 and H2O2

Robust strategies to eliminate endocrine disruptive estrogens in water resources

The widespread occurrence and ubiquitous distribution of estrogens, i.e., estrone (E1), estradiol (E2), and estriol (E3) in our water matrices, is an issue of global concern. Public and regulatory authorities are concerned and placing joint efforts to eliminate estrogens and related environmentally hazardous compounds, due to their toxic influences on the environmental matrices, ecology, and human health, even at low concentrations. However, most of the available literature is focused on the occurrence of estrogens in different water environments with limited treatment options. Thus, a detailed review to fully cover the several treatment processes is needed. This review comprehensively and comparatively discusses many physical, chemical, and biological-based treatments to eliminate natural estrogens, i.e., estrone (E1), estradiol (E2), and estriol (E3) and related synthetic estrogens, e.g., 17α-ethinylestradiol (EE2) and other related hazardous compounds. The covered techniques include adsorption, nanofiltration, ultrafiltration, ultrasonication, photocatalysis of estrogenic compounds, Fenton, Fenton-like and photo-Fenton degradation of estrogenic compounds, electro-Fenton degradation of estrogenic compounds, ozonation, and biological methods for the removal of estrogenic compounds are thoroughly discussed with suitable examples. The studies revealed that treatment plants based on chemical and biological approaches are cost-friendly for removing estrogenic pollutants. Further, there is a need to properly monitor and disposal of the usage of estrogenic drugs in humans and animals. Additional studies are required to explore a robust and more advanced oxidation treatment strategy that can contribute effectively to industrial-scale applications. This review may assist future investigations, monitoring, and removing estrogenic compounds from various environmental matrices. In concluding remarks, a way forward and future perspectives focusing on bridging knowledge gaps in estrogenic compounds removal are also proposed.

A review on heterogeneous sonocatalyst for treatment of organic pollutants in aqueous phase based on catalytic mechanism

Heterogeneous sonocatalysis, as an emerging advanced oxidation process (AOP), has shown immense potential in water treatment and been widely demonstrated to remove persistent organic compounds in the past decade. The present article aims to provide a comprehensive review on the development of a heterogeneous catalyst for enhancing the ultrasonic degradation rate of organic pollutants from a viewpoint of sonocatalytic mechanism. The rational design and fundamentals for preparing sonocatalysts are presented in the context of facilitating the heterogeneous nucleation and photo-thermal-catalytic effects as well as considering the mechanical stability and separation capacity of the heterogeneous catalyst. In addition, some new trends, ongoing challenges and possible methods to overcome these challenges are also highlighted and proposed.

Ultrasound-enhanced nanosized zero-valent copper activation of hydrogen peroxide for the degradation of norfloxacin

Commercial nanosized zero-valent copper (nZVC) was used as hydrogen peroxide (H₂O₂) activator in conjunction with ultrasonic irradiation (US) for the oxidative degradation of norfloxacin (NOR) in this study. Compared with silent degradation system, a significantly enhanced NOR removal was obtained in sono-advanced Fenton process, which involved a synergistic effect between sonolysis and Fenton-like reaction. Almost complete removal of NOR was achieved at 30min when the operating conditions were 0.25g/L nZVC and 10mM H₂O₂ with ultrasound power of 240W at 20kHz. The released Cu⁺ during the nZVC dissolution was the predominant copper species to activate H₂O₂ and yield hydroxyl radicals (OH) in US/nZVC/H₂O₂ system. According to the radical quenching experiments and electron paramagnetic resonance technique, hydroxyl radicals in solution (OH_free) were verified as the primary reactive species, and superoxide anion radicals (O₂^-) were regarded as the mediator for the copper cycling by reduction of Cu²⁺ to Cu⁺. NOR removal efficiencies were improved in various degrees when increased nZVC dosage, ultrasound power, hydrogen-ion amount and H₂O₂ concentration. Moreover, the inhibitory effect of different inorganic salts on NOR degradation followed the sequence of Na₂SO₄>NaNO₃≈no salt>NaCl>NaHCO₃. Finally, eleven intermediates were identified and five oxidation pathways were proposed, the cleavage of piperazine ring and transformation of quinolone group seemed to be the major pathway.

Sonocatalytical degradation enhancement for ibuprofen and sulfamethoxazole in the presence of glass beads and single-walled carbon nanotubes

Sonocatalytic degradation experiments were carried out to determine the effects of glass beads (GBs) and single-walled carbon nanotubes (SWNTs) on ibuprofen (IBP) and sulfamethoxazole (SMX) removal using low and high ultrasonic frequencies (28 and 1000kHz). In the absence of catalysts, the sonochemical degradation at pH 7, optimum power of 0.18WmL(-1), and a temperature of 15°C was higher (79% and 72%) at 1000kHz than at 28kHz (45% and 33%) for IBP and SMX, respectively. At the low frequency (28kHz) H2O2 production increased significantly, from 10μM (no GBs) to 86μM in the presence of GBs (0.1mm, 10gL(-1)); however, no enhancement was achieved at 1000kHz. In contrast, the H2O2 production increased from 10μM (no SWNTs) to 31μM at 28kHz and from 82μM (no SWNTs) to 111μM at 1000kHz in the presence of SWNTs (45mgL(-1)). Thus, maximum removals of IBP and SMX were obtained in the presence of a combination of GBs and SWNTs at the low frequency (94% and 88%) for 60min contact time; however, >99% and 97% removals were achieved for 40 and 60min contact times at the high frequency for IBP and SMX, respectively. The results indicate that both IBP and SMX degradation followed pseudo-first-order kinetics. Additionally, the enhanced removal of IBP and SMX in the presence of catalysts was because GBs and SWNTs increased the number of free OH radicals due to ultrasonic irradiation and the adsorption capacity increase with SWNT dispersion.

Ultrasonic degradation of acetaminophen and naproxen in the presence of single-walled carbon nanotubes

Ultrasonic (US) and single-walled carbon nanotube (SWNT)-catalyzed ultrasonic (US/SWNT) degradation of a pharmaceutical (PhAC) mixture of acetaminophen (AAP) and naproxen (NPX) used as analgesics was carried out in water. In the absence of SWNTs, maximum degradations of AAP and NPX occurred at a high frequency (1000 kHz) and under acidic conditions (pH 3) and different solution temperatures (25 °C at 28 kHz and 35 °C at 1000 kHz) during US reactions. Rapid degradation of PhACs occurred within 10 min at 28 kHz (44.5% for AAP; 90.3% for NPX) and 1000 kHz (39.2% for AAP; 74.8% for NPX) at a SWNT concentration of 45 mgL(-1) under US/SWNT process, compared with 28 kHz (5.2% for AAP; 10.6% for NPX) and 1000 kHz (29.1% for AAP; 46.2% for NPX) under US process. Degradation was associated with the dispersion of SWNTs; small particles acted as nuclei during US reactions, enhancing the H2O2 production yield. NPX removal was greater than AAP removal under all US-induced reaction and SWNT adsorption conditions, which is governed by the chemical properties of PhACs. Based on the results, the optimal treatment performance was observed at 28 kHz with 45 mgL(-1) SWNTs (US/SWNT) within 10 min.

The influence of capsular extracellular polymeric substances on the interaction between TiO₂ nanoparticles and planktonic bacteria

The role of capsular extracellular polymeric substances (EPS) at the surface of planktonic microorganisms was investigated for possible toxicity mitigation from titanium dioxide (TiO₂) nanoparticles, using variable EPS producing wild-type and isogenic mutant strains of Pseudomonas aeruginosa. Membrane integrity assays revealed that increased capsular EPS reduced cell membrane damage. Acting as a barrier to the cell membrane, capsular EPS permitted attachment of nanoparticles to the cell, while simultaneously delaying cellular damage caused by the production of reactive oxygen species (ROS). Modulations in ROS production were monitored in situ; while changes in the chemical composition of the microorganisms before and after exposure were examined with Fourier transform infrared spectroscopy (FTIR). The addition of methanol, a known radical scavenger, was shown to vastly reduce ROS production and membrane integrity losses, while not affecting physical interactions of nanoparticles with the microorganism. The results support that EPS provides an attachment site for nanoparticles, but more importantly act as a barrier to cell membrane oxidation from ROS. These observations provide better understanding of the overall importance of ROS in TiO₂ microbial toxicity.

Optofluidic planar reactors for photocatalytic water treatment using solar energy

Optofluidics may hold the key to greater success of photocatalytic water treatment. This is evidenced by our findings in this paper that the planar microfluidic reactor can overcome the limitations of mass transfer and photon transfer in the previous photocatalytic reactors and improve the photoreaction efficiency by more than 100 times. The microreactor has a planar chamber (5 cm×1.8 cm×100 μm) enclosed by two TiO(2)-coated glass slides as the top cover and bottom substrate and a microstructured UV-cured NOA81 layer as the sealant and flow input∕output. In experiment, the microreactor achieves 30% degradation of 3 ml 3×10(-5)M methylene blue within 5 min and shows a reaction rate constant two orders higher than the bulk reactor. Under optimized conditions, a reaction rate of 8% s(-1) is achieved under solar irradiation. The average apparent quantum efficiency is found to be only 0.25%, but the effective apparent quantum efficiency reaches as high as 25%. Optofluidic reactors inherit the merits of microfluidics, such as large surface∕volume ratio, easy flow control, and rapid fabrication and offer a promising prospect for large-volume photocatalytic water treatment.