Biodegradation of polyacrylamide by bacteria isolated from activated sludge and oil-contaminated soil

Deciphering polymer degradation chemistry via integrating new database construction into suspect screening analysis

Water-soluble synthetic polymers and their environmental degradation products are overlooked but important industrial pollutants in wastewater. However, the detection of degradation products is limited to bulk solution chemistry and molecular-level analysis remains unreachable. In this work, we assessed the feasibility of current suspect screening and nontarget workflow using liquid chromatography-high resolution mass spectrometry (LC-HRMS) to elucidate molecular level information about polyacrylamide (PAM) and its degraded products by free radicals. Radical chain scission of PAM (10 kDa) using heat-activated persulfate was conducted to simulate hydraulic fracturing conditions in the deep subsurface. We found that the current workflows in the commercial software generated predicted formulae with low accuracy, due to limited capability of peak picking and formula prediction for high mass and charge features. By modeling literature-reported degradation pathways, we constructed a degradation product database of over 463 000 unique formulae, which improved the accuracy of the predicted formula. For the matched features, the ratio of aldehyde/ketone terminating molecule abundance was found to increase over 24 h degradation time, suggesting increasing content of aldehydes by radical-induced oxidative chain scission of PAM. This is contradictory to previously proposed ratios of carbon-centered radical position on polymer backbone initiated by hydroxyl radicals. Using in silico fragmentation of MS1 features, we identified 11 structures with confidence levels 2b and 3 using their MS2 information. This is the first attempt to resolve complex polymer degradation chemistry using HRMS that can advance our ability to detect water-soluble polymer pollutants and their transformation products in environmental samples.

Interactions between microbial communities and polymers in hydraulic fracturing water cycle: A review

Hydraulic fracturing (HF) has substantially boosted global unconventional hydrocarbon production but has also introduced various environmental and operational challenges. Understanding the interactions between abundant and diverse microbial communities and chemicals, particularly polymers used for proppant delivery, thickening, and friction reduction, in HF water cycles is crucial for addressing these challenges. This review primarily examined the recent studies conducted in China, an emerging area for HF activities, and comparatively examined studies from other regions. In China, polyacrylamide (PAM) and its derivatives products became key components in hydraulic fracturing fluid (HFF) for unconventional hydrocarbon development. The microbial diversity of unconventional HF water cycles in China was higher compared to North America, with frequent detection of taxa such as Shewanella, Marinobacter, and Desulfobacter. While biodegradation, biocorrosion, and biofouling were common issues across regions, the mechanisms underlying these microbe-polymer interactions differed substantially. Notably, in HF sites in the Sichuan Basin, the use of biocides gradually decreased its efficiency to mitigate adverse microbial activities. High-throughput sequencing proved to be a robust tool that could identify key bioindicators and biodegradation pathways, and help select optimal polymers and biocides, leading to more efficient HFF systems. The primary aim of this study is to raise awareness about the interactions between microorganisms and polymers, providing fresh insights that can inform decisions related to enhanced chemical use and biological control measures at HF sites.

Towards sustainable management of polyacrylamide in soil-water environment: Occurrence, degradation, and risk

Polyacrylamide (PAM) possesses unique characteristics, including high water solubility, elevated viscosity and effective flocculation capabilities. These properties make it valuable in various sectors like agriculture, wastewater treatment, enhanced oil recovery, and mineral processing industries, contributing to a continually expanding market. Despite its widespread use globally, understanding its environmental fate at the soil-water interface remains limited. This article aims to provide an overview of the occurrence, degradation pathways, toxicity, and risks associated with PAM in the bioenvironment. The findings indicate that various degradation pathways of PAM may occur in the bioenvironment through mechanical, thermal, chemical, photocatalytic degradation, and/or biodegradation. Through a series of degradation processes, PAM initially transforms into oligomers and acrylamide (AM). Subsequently, AM may undergo biodegradation, converting into acrylic acid (AA) and other compounds such as ammonia. Notably, among these degradation intermediates, AM demonstrates high biodegradability, and the bioaccumulations of both AM and AA are not considered significant. Ensuring the sustainable use of PAM necessitates a comprehensive understanding among policymakers, scholars, and industry professionals regarding PAM, encompassing its properties, applications, degradation pathways, toxic effect on humans and the environment, and relevant regulations. Additionally, this study offers insights into future priority research directions, such as establishing of a reliable source-to-destination supply chain system, determining the maximum allowable amount for PAM in farmlands, and conducting long-term trials for the PAM-containing demolition residues.

Chemical and Physical Architecture of Macromolecular Gels for Fracturing Fluid Applications in the Oil and Gas Industry; Current Status, Challenges, and Prospects

Hydraulic fracturing is vital in recovering hydrocarbons from oil and gas reservoirs. It involves injecting a fluid under high pressure into reservoir rock. A significant part of fracturing fluids is the addition of polymers that become gels or gel-like under reservoir conditions. Polymers are employed as viscosifiers and friction reducers to provide proppants in fracturing fluids as a transport medium. There are numerous systems for fracturing fluids based on macromolecules. The employment of natural and man-made linear polymers, and also, to a lesser extent, synthetic hyperbranched polymers, as additives in fracturing fluids in the past one to two decades has shown great promise in enhancing the stability of fracturing fluids under various challenging reservoir conditions. Modern innovations demonstrate the importance of developing chemical structures and properties to improve performance. Key challenges include maintaining viscosity under reservoir conditions and achieving suitable shear-thinning behavior. The physical architecture of macromolecules and novel crosslinking processes are essential in addressing these issues. The effect of macromolecule interactions on reservoir conditions is very critical in regard to efficient fluid qualities and successful fracturing operations. In future, there is the potential for ongoing studies to produce specialized macromolecular solutions for increased efficiency and sustainability in oil and gas applications.

Evolution of Hybrid Hydrogels: Next-Generation Biomaterials for Drug Delivery and Tissue Engineering

Hydrogels, being hydrophilic polymer networks capable of absorbing and retaining aqueous fluids, hold significant promise in biomedical applications owing to their high water content, permeability, and structural similarity to the extracellular matrix. Recent chemical advancements have bolstered their versatility, facilitating the integration of the molecules guiding cellular activities and enabling their controlled activation under time constraints. However, conventional synthetic hydrogels suffer from inherent weaknesses such as heterogeneity and network imperfections, which adversely affect their mechanical properties, diffusion rates, and biological activity. In response to these challenges, hybrid hydrogels have emerged, aiming to enhance their strength, drug release efficiency, and therapeutic effectiveness. These hybrid hydrogels, featuring improved formulations, are tailored for controlled drug release and tissue regeneration across both soft and hard tissues. The scientific community has increasingly recognized the versatile characteristics of hybrid hydrogels, particularly in the biomedical sector. This comprehensive review delves into recent advancements in hybrid hydrogel systems, covering the diverse types, modification strategies, and the integration of nano/microstructures. The discussion includes innovative fabrication techniques such as click reactions, 3D printing, and photopatterning alongside the elucidation of the release mechanisms of bioactive molecules. By addressing challenges, the review underscores diverse biomedical applications and envisages a promising future for hybrid hydrogels across various domains in the biomedical field.

Acidovorax PSJ13, a novel, efficient polyacrylamide-degrading bacterium by cleaving the main carbon chain skeleton without the production of acrylamide

Given the environmental challenge caused by the wide use of polyacrylamide (PAM), an environmental-friendly treatment method is required. This study demonstrates the role of Acidovorax sp. strain PSJ13 isolated from dewatered sludge in efficiently degrading PAM. To be specific, the strain PSJ13 can degrade 51.67% of PAM in 96 h (2.39 mg/(L h)) at 35 °C, pH 7.5 and 5% inoculation amount. Besides, scanning electron microscope, X-ray photoelectron spectroscopy, liquid chromatography-mass spectrometry and high-performance liquid chromatography were employed to analyze samples, and the nitrogen present in the degradation products was investigated. The results showed that the degradation of PAM by PSJ13 started from the side chain and then mainly the -C-C- main chain, which produced no acrylamide monomers. As the first study to report the role of Acidovorax in efficiently degrading PAM, this work may provide a solution for industries that require PAM management.

Water-Soluble Synthetic Polymers: Their Environmental Emission Relevant Usage, Transport and Transformation, Persistence, and Toxicity

Water-soluble synthetic polymers (WSPs) are distinct from insoluble plastic particles, which are both critical components of synthetic polymers. In the history of human-made macromolecules, WSPs have consistently portrayed a crucial role and served as the ingredients of a variety of products (e.g., flocculants, thickeners, solubilizers, surfactants, etc.) commonly used in human society. However, the environmental exposures and risks of WSPs with different functions remain poorly understood. This paper provides a critical review of the usage, environmental fate, environmental persistence, and biological consequences of multiple types of WSPs in commercial and industrial production. Investigations have identified a wide market of applications and potential environmental threats of various types of WSPs, but we still lack the suitable assessment tools. The effects of physicochemical properties and environmental factors on the environmental distribution as well as the transport and transformation of WSPs are further summarized. Evidence regarding the degradation of WSPs, including mechanical, thermal, hydrolytic, photoinduced, and biological degradation is summarized, and their environmental persistence is discussed. The toxicity data show that some WSPs can cause adverse effects on aquatic species and microbial communities through intrinsic toxicity and physical hazards. This review may serve as a guide for environmental risk assessment to help develop a sustainable path for WSP management.

Binding of Anionic Polyacrylamide with Amidase and Laccase under 298, 303, and 308 K: Docking and Molecular Dynamics Simulation Studies Combined with Experiments

Amidase and laccase play a key role in the degradation process of anionic polyacrylamide (HPAM). However, the largest challenge of HPAM enzymatic degradation is whether the enzyme can bind with a substrate for a period of time. Here, the most suitable complexes, namely, Rh Amidase-HPAM-2 and Bacillus subtilis (B. subtilis) laccase-HPAM-3, were obtained by docking, and they were carried out for molecular dynamics simulation (MDS) under 298, 303, and 308 K. MDS result analysis showed that Rh Amidase-HPAM-2 was the most stable at 298 K mainly due to a salt bridge and a hydrogen bond, and B. subtilis laccase-HPAM-3 was the most stable at 298 K mainly due to two electrostatic and hydrogen bonds. The LYS96 in Rh Amidase-HPAM-2 and LYS135 in B. subtilis laccase-HPAM-3 had been the most important in their binding process. The binding of Rh Amidase-HPAM-2 and B. subtilis laccase-HPAM-3 was optimal at 303 and 298 K, respectively. HPAM was degraded by mixed bacteria, and the optimal conditions were determined to be 308 K, initial pH = 7, and an inoculated dosage of 2 mL. Under these conditions, the degradation ratio reached 39.24%. The effect of parameters on the HPAM degradation ratio followed a decreasing order of temperature > initial pH > inoculated dosage. The HPAM codegradation mechanism was supposed by mixed bacteria according to test data. The mixed bacteria secreted both amidase and laccase, and they interacted jointly with HPAM. These results lay a theoretical foundation to design and modify the enzyme through mutation experiments in the future.

Aerobic degradation of anionic polyacrylamide in oil sands tailings: Impact factor, degradation effect, and mechanism

An investigation was carried out to study the degradation of anionic polyacrylamide (A-PAM) under different temperature and microorganism conditions as well as to assess its effects on water chemistry and toxicity in oil sands tailings. The maximum removal efficiency of A-PAM was 41.0 % in tailings water with augmented microorganisms at 20 °C. No acrylamide (AMD) monomer was released during the A-PAM degradation, while residual AMD, from the manufacturing process to make A-PAM, was completely removed within 4 weeks. Both temperature and microorganisms showed significant effects (p < 0.05) on the degradation of A-PAM and residual AMD. Gel permeation chromatography (GPC) and Fourier transform infrared (FT-IR) analyses showed that biodegradation could be the active pathway for A-PAM degradation in oil sands tailings. These analyses also indicated that macromolecular A-PAM was degraded into lower molecular weight organic compounds. No remarkable changes of the total concentration of naphthenic acids (NAs) were observed in A-PAM treated tailings water. However, low concentrations of fatty acids (<2.5 mg/L), which fit the NAs formula, were detected in pure polymer solution, indicating that A-PAM degradation would not affect the total concentration of NAs in tailings water but affect their distribution. Our results also showed that total organic carbon (TOC) and chemical oxygen demand (COD) could be used as indicators of A-PAM degradation in tailings water due to their strong linear correlations (R² > 0.90). Only slight increases in zeta potential and pH were found during A-PAM degradation. Limited effect on acute toxicity and no genotoxicity were found in A-PAM treated tailings water. Furthermore, the results suggest that A-PAM undergoes hydrolysis of amide groups by amidase enzymes, releasing ammonia and smaller molecules like organic acids. This research provides valuable information regarding the stability and impacts of A-PAM and thus will be beneficial for the management of oil sands tailings in long period of time.

Effect of partially hydrolyzed polyacrylamide (HPAM) on the bacterial communities of wetland rhizosphere soils and their efficiency in HPAM and alkane degradation

The effect of partially hydrolyzed polyacrylamide (HPAM) on structure and function of rhizosphere soil bacterial communities in constructed wetlands has been largely underinvestigated. In this study, we compare the effect of 250, 500, and 1000 mg/L of HPAM on bacterial community composition of Phragmites australis associated rhizosphere soils in an experimental wetland using MiSeq amplicon sequencing. Rhizosphere soils from the HPAM-free and the 500-mg/L-exposed treatments were used for laboratory experiments to further investigate the effect of HPAM on the soil's degradation and respiration activities. Soils treated with HPAM showed differences in bacterial communities with the dominance of Proteobacteria and the enrichment of potential hydrocarbon and HPAM-degrading bacteria. CO₂ generation was higher in the HPAM-free soils than in the HPAM pre-exposed soil, with a noticeable increase in both soils when oil was added. The addition of HPAM at different concentrations had a more pronounced effect on CO₂ evolution in the HPAM-pre-exposed soil. Soils were able to degrade between 37 ± 18.0 and 66 ± 6.7% of C₁₀ to C₃₀ alkanes after 28 days, except in the case of HPAM-pre-exposed soil treated with 500 mg/L where degradation reached 92 ± 4.3%. Both soils reduced HPAM concentration by 60 ± 15% of the initial amount in the 500 mg/L treatment, but by only ≤ 21 ± 7% in the 250-mg/L and 1000-mg/L treatments. In conclusion, the rhizosphere soils demonstrated the ability to adapt and retain their ability to degrade hydrocarbon in the presence of HPAM.

Partially hydrolyzed polyacrylamide: enhanced oil recovery applications, oil-field produced water pollution, and possible solutions

Polymers, such as partially hydrolyzed polyacrylamide (HPAM), are widely used in oil fields to enhance or improve the recovery of crude oil from the reservoirs. It works by increasing the viscosity of the injected water, thus improving its mobility and oil recovery. However, during such enhanced oil recovery (EOR) operations, it also produces a huge quantity of water alongside oil. Depending on the age and the stage of the oil reserve, the oil field produces ~ 7-10 times more water than oil. Such water contains various types of toxic components, such as traces of crude oil, heavy metals, and different types of chemicals (used during EOR operations such as HPAM). Thus, a huge quantity of HPAM containing produced water generated worldwide requires proper treatment and usage. The possible toxicity of HPAM is still ambiguous, but its natural decomposition product, acrylamide, threatens humans' health and ecological environments. Therefore, the main challenge is the removal or degradation of HPAM in an environmentally safe manner from the produced water before proper disposal. Several chemical and thermal techniques are employed for the removal of HPAM, but they are not so environmentally friendly and somewhat expensive. Among different types of treatments, biodegradation with the aid of individual or mixed microbes (as biofilms) is touted to be an efficient and environmentally friendly way to solve the problem without harmful side effects. Many researchers have explored and reported the potential of such bioremediation technology with a variable removal efficiency of HPAM from the oil field produced water, both in lab scale and field scale studies. The current review is in line with United Nations Sustainability Goals, related to water security-UNSDG 6. It highlights the scale of such HPAM-based EOR applications, the challenge of produced water treatment, current possible solutions, and future possibilities to reuse such treated water sources for other applications.

Isolation of a diazinon-degrading strain Sphingobium sp. DI-6 and its novel biodegradation pathway

Diazinon is one of the most widely used organophosphate insecticides, one that is frequently detected in the environment. In this study, a diazinon-degrading bacterium, DI-6, previously isolated from diazinon-contaminated soil in China has been subsequently identified as Sphingobium sp. on the basis of its physiological and biochemical characteristics, as well as by virtue of a comparative analysis of 16S rRNA gene sequences. This strain is capable of using diazinon as its sole carbon source for growth and was able to degrade 91.8% of 100 mg L–1 diazinon over a 60-h interval. During the degradation of diazinon, the following seven metabolites were captured and identified by gas chromatography/mass spectrometry (GC–MS) analysis: diazoxon, diazinon aldehyde, isopropenyl derivative of diazinon, hydroxyethyl derivative of diazinon, diazinon methyl ketone, O-[2-(1-hydroxyethyl)-6-methylpyrimidin-4-yl] O-methyl O-hydrogen phosphorothioate, and O-(6-methyl pyrimidin-4-yl) O,O-dihydrogen phosphorothioate. Based on these metabolites, a novel microbial biodegradation pathway of diazinon by Sphingobium sp. DI-6 is proposed. This research provides potentially useful information for the application of the DI-6 strain in bioremediation of diazinon-contaminated environments.

Biodegradation of anionic polyacrylamide by manganese peroxidase: docking, virtual mutation based on affinity, QM/MM calculation and molecular dynamics simulation

Manganese peroxidase (Mn P) is capable of effectively degrading anionic polyacrylamide (HPAM). However, the interaction of Mn P with HPAM at molecular level is lacking until now. Here, the HPAM model compounds, HPAM-2, HPAM-3, HPAM-4, and HPAM-5, were selected to reveal their binding mechanisms with Mn P. The results showed that the most suitable substrate for Mn P was HPAM-5, and the main reason for MnP-HPAM-5 with maximal affinity was strong hydrogen bond. LYS96 was the important key residue in all complexes, and the number of key residue was largest in MnP-HPAM-5. The optimal THR27ILE mutant may enhance the affinity of Mn P to HPAM-4. The stability of Mn P binding to HPAM-4 was the optimal. These results were helpful in designing highly efficient Mn P against HPAM to protect the ecological environment.

Biodegradation of Polymers Used in Oil and Gas Operations: Towards Enzyme Biotechnology Development and Field Application

Linear and crosslinked polymers are commonly used in the oil and gas industry. Guar-derived polymers have been extensively utilized in hydraulic fracturing processes, and recently polyacrylamide and cellulose-based polymers have also found utility. As these polymers are used during various phases of the hydraulic fracturing process, they can accumulate at formation fracture faces, resulting in undesired filter cakes that impede oil and gas recovery. Although acids and chemical oxidizers are often added in the fracturing fluids to degrade or ‘break’ polymer filter cakes, the constant use of these chemicals can be hazardous and can result in formation damage and corrosion of infrastructure. Alternately, the use of enzymes is an attractive and environmentally friendly technology that can be used to treat polymer accumulations. While guar-linkage-specific enzyme breakers isolated from bacteria have been shown to successfully cleave guar-based polymers and decrease their molecular weight and viscosity at reservoir conditions, new enzymes that target a broader range of polymers currently used in hydraulic fracturing operations still require research and development for effective application. This review article describes the current state-of-knowledge on the mechanisms and enzymes involved in biodegradation of guar gum, polyacrylamide (and hydrolyzed polyacrylamide), and carboxymethyl cellulose polymers. In addition, advantages and challenges in the development and application of enzyme breaker technologies are discussed.

Effectively Recycling Swine Wastewater by Coagulation–Flocculation of Nonionic Polyacrylamide

Recycling swine wastewater is an environmental and economic issue for promoting the sustainable development of the pig industry worldwide. The application of a flocculant, non-ionic polyacrylamide (NPAM) for treating the contaminants in wastewater was trialed in this study. Firstly, the optimal pH value for the coagulation–flocculation of NPAM was adjusted by hydrochloric acid and sodium hydroxide. The viscosity of the flocculant solution was examined by a rotational viscometer and the morphology of the flocculant on the glass surface was examined by an optical microscope and an atomic force microscope. The result showed that a pH value of 11 or more was best for NPAM coagulation–flocculation. Subsequently, the swine wastewater from the anoxic reactor of a three-stage manure treatment system was adjusted by a pH adjuster, calcium hydroxide, followed by the coagulation–flocculation of NPAM. The quality of the final, treated water was examined by a regular wastewater analysis. The results showed that the removal rates for copper ions, zinc ions, NH4+–N, total phosphate (TP), and total nitrogen (TN) were 96.3%, 97.8%, 99.2%, 94.9%, and 99.1%, respectively. Our study concluded that this water recycling method combining the existing organic fertilizer production and power generation enhanced the recycling strategy for swine wastewater treatment and could further the sustainable development of the pig industry.

Impacts of partially hydrolyzed polyacrylamide (HPAM) on microbial mats from a constructed wetland treating oilfield produced water

Constructed wetlands have been successfully used in the treatment of produced water brought to the surface in large quantities during oil extraction activities. However, with the increasing use of partially hydrolyzed polyacrylamide (HPAM) in enhancing oil recovery, the impacts of HPAM on the biological processes of wetlands is still unknown. Microbial mats in wetlands play a key role in hydrocarbon degradation. Here, we compared the bacterial communities of four wetland microbial mats after flooding with different concentrations of HPAM. Two mats (i.e. the HPAM-free and the 500 ppm HPAM pre-exposed mats) were selected to further investigate the effect of HPAM on respiration and biodegradation activities. The field mats exhibited clear differences in their bacterial community structure, where Cyanobacteria and Alphaproteobacteria became dominant in the presence of HPAM. In the laboratory experiments, the generated CO₂ by the HPAM-free and the 500 ppm HPAM pre-exposed mats did not vary significantly when HPAM was added, although CO₂ values were slightly higher in the presence of oil. Both mats were still able to degrade between 15 ± 14.4 to 50 ± 13.0% of C₁₀ to C₃₀ alkanes in 28 days, and this degradation was not affected by HPAM addition. The HPAM concentration decreased by 22-34% of the initial amount after 28 days of incubation in the HPAM-free mat, versus only 7-18.4% decrease in the 500 ppm HPAM pre-exposed mat. We conclude that the wetland microbial mats seem to have become well adapted to HPAM and could maintain their respiration and hydrocarbon degradation activities.

Microfluidic aqueous two-phase system-based nitrifying bacteria encapsulated colloidosomes for green and sustainable ammonium-nitrogen wastewater treatment

A novel strategy was proposed for preparing micro-scale monodisperses nitrifying bacteria (NB) encapsulated Ca-Alg@CaCO₃ colloidosomes by exploiting capillary microfluidic device, as an attempt to treat ammonium-nitrogen wastewater in an environment-friendly, efficient and repeatable manner based on the aqueous two-phase (ATPS) system. By complying with the spatial confined urease mediate biomineralization reactions, ATPS droplets (Dextran in Polyethylene glycol) containing urease, NB regent and alginate were used as templates to prepare 500 μm Ca-Alg@CaCO₃ colloidosomes with 16.48 Mpa mechanical strength. The activity of NB encapsulated in the colloidosomes was high. The simulated wastewater treated with the colloidosomes achieved a high removal rate even at harsh temperature and pH value. In both simulated and real wastewater treatment, prolonged reuse times (216 h) with high removal rate (＞90%, after being applied 72 h) were obtained by using Ca-Alg@CaCO₃ colloidosomes, as compared with that (96 h) by using general alginate microbeads.

Using stable isotope probing and fluorescence spectroscopy to examine the roles of substrate and soluble microbial products in extracellular polymeric substance formation in activated sludge process

In this study, we used stable isotope-labeled soluble microbial products (SMP) and substrates to explore their assimilation into the formation of new biological products (i.e., extracellular polymeric substances and biomass) in two adjacent sequencing batch reactors. The isotope labeling approach along with fluorescence spectroscopy allowed us to distinguish between refractory and labile portions of SMP constituents as well as their roles in the formation of extracellular polymeric substances (EPS). Comparison of SMP fluorescence and the specific UV absorbance values between the two reactors revealed the presence of humic-like aromatic substances in the non-consumable part of SMP, which can be ultimately released as effluent organic matter. Parallel factor analysis modeling of fluorescence spectra showed that the hydrolysis of EPS contents mostly resulted in humic-like components in SMP rather than protein-like components, which were initially abundant in EPS (>80%). From variations in carbon and nitrogen isotopic contents in EPS and biomass, it was found that carbon-containing substrates were enriched faster than their nitrogenous counterparts. The contributions to new EPS formation reached 87.5% for carbon and 60.5% for nitrogen. Meanwhile, the isotopic tracking of the labeled SMP revealed that only 11.0% and 11.9% of carbon and 13.3% and 11.6% of nitrogen from the influent SMP were finally assimilated into EPS and biomass, respectively. In contrast, the isotopic enrichment in SMP was higher (~50%) than that of EPS and biomass, indicating the low bioavailability and refractory nature of the feed SMP. This study proposed a promising approach for estimating the relative contributions of different forms of labile substrate and SMP to the formation of EPS in activated sludge processes. This approach could be suggested as a versatile method for establishing the kinetics, substrate element flow, mass balance on organic substrates and nutrients, as well as for tracking the consumption and uptake pathways of hazardous materials.

Geochemical Stability of Oil Sands Tailings in Mine Closure Landforms

Oil sands surface mining in Alberta has generated over a billion cubic metres of waste, known as tailings, consisting of sands, silts, clays, and process-affected water that contains toxic organic compounds and chemical constituents. All of these tailings will eventually be reclaimed and integrated into one of two types of mine closure landforms: end pit lakes (EPLs) or terrestrial landforms with a wetland feature. In EPLs, tailings deposits are capped with several metres of water while in terrestrial landforms, tailings are capped with solid materials, such as sand or overburden. Because tailings landforms are relatively new, past research has heavily focused on the geotechnical and biogeochemical characteristics of tailings in temporary storage ponds, referred to as tailings ponds. As such, the geochemical stability of tailings landforms remains largely unknown. This review discusses five mechanisms of geochemical change expected in tailings landforms: consolidation, chemical mass loading via pore water fluxes, biogeochemical cycling, polymer degradation, and surface water and groundwater interactions. Key considerations and knowledge gaps with regard to the long-term geochemical stability of tailings landforms are identified, including salt fluxes and subsequent water quality, bioremediation and biogenic greenhouse gas emissions, and the biogeochemical implications of various tailings treatment methods meant to improve geotechnical properties of tailings, such as flocculant (polyacrylamide) and coagulant (gypsum) addition.

Treatment of polyacrylamide-polluted wastewater using a revolving algae biofilm reactor: Pollutant removal performance and microbial community characterization

Industries such as oil mining face challenges in the treatment of polyacrylamide (PAM)-containing wastewater produced during petroleum extraction. The feasibility of using revolving algae biofilm (RAB) reactors to treat PAM-contaminated wastewater for simultaneous removal of carbon and nitrogen was evaluated. The presence or absence of external nitrogen sources had a significant impact on the treatment effect of the RAB system. With the additional N source, the PAM, COD, TOC, and TN removal rates were 64.1 ± 2.0, 58 ± 1.5, 34.5 ± 1.5, and 85 ± 6.0%, respectively. High-throughput sequencing showed that the biofilms on RAB reactors contained a variety of bacteria, cyanobacteria, and green algae, degrading PAM through various mechanisms. The results of infrared spectroscopy analysis indicate that the product of these processes was carboxylic acid. Based on these results, it was concluded that RAB systems can be effectively applied to the treatment of polymer-containing wastewater.

Assessment of transportation processes of polyacrylamide in chernozem and saline soil by numerical model

Polyacrylamide (PAM) was studied in two characteristic soils in Daqing City: chernozem and saline soil. 120 mg L^-1 of KBr was used as a conservation tracer to estimate diffusion coefficients and pore velocities of chernozem and saline soil by using the breakthrough curves (BTCs) of Br^-. Isothermal adsorption equations were coupled with the traditional two-site model to establish the transportation equation of PAM. The results of comparing the simulation curve with the BTCs of PAM at different rates showed that the transportation equation of PAM could simulate the transport process of PAM in soil column accurately. PAM behaved as non-equilibrium adsorption in both soils by calculating the kinetic parameters in this equation. The results of this work not only confirmed the kinetic parameters of PAM in both soils, but also found that there is a good liner relationship between the mass transfer coefficient and pore velocity. The R² values of the two linear equations are 0.983 and 0.979. These linear equations provide a good prediction basis for site prediction. In addition, it was found that organic matter is the main influence factor for the adsorption capacity of chernozem causing significantly larger than that of saline soil.

Combination of biochar and immobilized bacteria accelerates polyacrylamide biodegradation in soil by both bio-augmentation and bio-stimulation strategies

Polyacrylamide (PAM) has been used extensively due to its well-known stable chemical properties, but limited information is available on the biodegradation of soil-containing PAM. In this work, sufficient degradation of PAM was achieved via the addition of the Klebsiella sp. PCX-biochar composite to PAM-containing soil, due to the synergic effect of bio-augmentation and bio-stimulation. The optimal degradation rate of 69.1% over 30-day period was observed under the following conditions: the addition of immobilized bacteria at 0.07 g/g, pH 6.6, and temperature at 38.0 °C. In this study, we showed that PAM was successfully hydrolyzed by amidase, and ammonia in the hydrolysis product was then oxidized by the nitrifying bacteria. The decrease of water-extractable organic carbon (WEOC) also demonstrated the chain cleavage in PAM. PAM was utilized as a carbon source not only by Klebsiella sp. PCX but also by some taxa from indigenous bacteria. Last but not least, it was shown in this study that biochar, even though immobilized with exogenous microorganisms, actually enhanced bacterial diversity and stimulated the growth of some indigenous PAM-degrading taxa. Based on the above observations, we concluded that PAM biodegradation via the addition of bacteria-immobilized biochar was a synergy of both bio-augmentation and bio-stimulation strategies.

Comparison of Three Catalytic Processes in Degradation of HPAM by tBu-TPyzPzCo

The present study describes a two-step synthesis process for the cobalt complex of tetra-2,3-(5,6-di-tert-butyl-pyrazino) porphyrazine (tBu-TPyzPzCo). The product was ultrasonically impregnated onto carbon black (CB) to prepare a supported catalyst (tBu-TPyzPzCo/CB). We built a split photoelectric catalytic device to test the performance of photocatalytic, electrocatalytic and photoelectrocatalytic degradation of partially hydrolyzed polyacrylamide (HPAM). The results confirm that HPAM exhibited more efficient degradation in the presence of a supporting catalyst using the photoelectrocatalytic process than by photocatalytic or electrocatalytic oxidation—or even the sum of the two in saline water. The photoelectrocatalytic reaction confirmed that the process conforms to quasi-first order reaction kinetics, while the reaction rate constants were 6.03 times that of photocatalysis and 3.97 times that of electrocatalysis. We also compared the energy consumption of the three processes and found that the photoelectrocatalytic process has the highest energy efficiency.

Current status on the biodegradability of acrylic polymers: microorganisms, enzymes and metabolic pathways involved

Abstract

Acrylic polymers (AP) are a diverse group of materials with broad applications, frequent use, and increasing demand. Some of the most used AP are polyacrylamide, polyacrylic acid, polymethyl methacrylates, and polyacrylonitrile. Although no information for the production of all AP types is published, data for the most used AP is around 9 MT/year, which gives an idea of the amount of waste that can be generated after products’ lifecycles. After its lifecycle ends, the fate of an AP product will depend on its chemical structure, the environmental setting where it was used, and the regulations for plastic waste management existing in the different countries. Even though recycling is the best fate for plastic polymer wastes, few AP can be recycled, and most of them end up in landfills. Because of the pollution crisis the planet is immersed, setting regulations and developing technological strategies for plastic waste management are urgent. In this regard, biotechnological approaches, where microbial activity is involved, could be attractive eco-friendly strategies. This mini-review describes the broad AP diversity, their properties and uses, and the factors affecting their biodegradability, underlining the importance of standardizing biodegradation quantification techniques. We also describe the enzymes and metabolic pathways that microorganisms display to attack AP chemical structure and predict some biochemical reactions that could account for quaternary carbon-containing AP biodegradation. Finally, we analyze strategies to increase AP biodegradability and stress the need for more studies on AP biodegradation and developing stricter legislation for AP use and waste control.

Key points

• Acrylic polymers (AP) are a diverse and extensively used group of compounds.

• The environmental fates and health effects of AP waste are not completely known.

• Microorganisms and enzymes involved in AP degradation have been identified.

• More biodegradation studies are needed to develop AP biotechnological treatments.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00253-020-11073-1.

Coarse-grained force-field for large scale molecular dynamics simulations of polyacrylamide and polyacrylamide-gels based on quantum mechanics

Developing a coarse-grained force field for polyacrylamide based on quantum mechanics equation of state.

Biodegradation of anionic polyacrylamide mediated by laccase and amidase: docking, virtual mutation based on affinity and DFT study

The aim of this work was to document the elucidation of a mechanism as a reference.

Key role of different levels of dissolved oxygen in hydrolyzed polyacrylamide bioconversion: Focusing on metabolic products, key enzymes and functional microorganisms

Dissolved oxygen (DO) played a short board effect on nitrogen biotransformation and pollutant metabolism. This study for the first time explored the key role of different levels of DO (covering anaerobic, anoxic and aerobic) on hydrolyzed polyacrylamide (HPAM) bioconversion. HPAM was metabolized to intermediates with different chain length. Volatile fatty acid (VFA) production rose first and then descended with DO concentration (0-2 mg·L-1), and the maximum reached 92.5 mg·L-1 when DO was 0.5 mg·L-1. Total nitrogen (TN) removal increased first and then dropped with DO concentration, and the maximum (61.4%) occurred at 0.5 mg·L-1 DO. NH4+-N dipped from 42.8 to 0 mg·L-1 and NO3--N rose from 0 to 32.8 mg·L-1 with DO concentration. The changes of enzyme activities were consistent with those of VFA production and TN removal, which were related to HPAM metabolism and N bioconversion. Microbial function was correlated to HPAM metabolism, N bioconversion and key enzyme.

Biodegradation of low molecular weight polyacrylamide under aerobic and anaerobic conditions: effect of the molecular weight

The biodegradation of polyacrylamide (PAM) includes the hydrolysis of amino groups and cleavage of the carbon chain; however, the effect of molecular weight on the biodegradation needs further investigations. In this study, biodegradation of low molecular weight PAM (1.6 × 10⁶ Da) was evaluated in two aerobic (25 °C and 40 °C) and two anaerobic (35 °C and 55 °C) reactors over 100 days. The removal of the low molecular weight PAM (52.0-52.6%) through the hydrolysis of amino groups by anaerobic treatment (35 °C and 55 °C) was much higher than that of the high molecular weight (2.2 × 10⁷ Da, 11.2-17.0%) observed under the same conditions. The molecular weight was reduced from 1.6 × 10⁶ to 6.45-7.42 × 10⁵ Da for the low molecular weight PAM, while the high molecular weight PAM declined from 2.2 × 10⁷ to 3.76-5.87 × 10⁶ Da. The results showed that the amino hydrolysis of low molecular weight PAM is easier than that of the high molecular weight one, while the cleavage of its carbon chain is still difficult. The molecular weights of PAM in the effluents from the two aerobic reactors (25 °C and 40 °C) were further reduced to 4.31 × 10⁵ and 5.68 × 10⁵ Da by the biofilm treatment, respectively. The results would be useful for the management of wastewater containing PAM.

Genome-Resolved Metagenomics Extends the Environmental Distribution of the Verrucomicrobia Phylum to the Deep Terrestrial Subsurface

The Verrucomicrobia phylum of bacteria is widespread in many different ecosystems; however, its role in microbial communities remains poorly understood. Verrucomicrobia are often low-abundance community members, yet previous research suggests they play a major role in organic carbon degradation. While Verrucomicrobia remain poorly represented in culture collections, numerous genomes have been reconstructed from metagenomic data sets in recent years. The study of genomes from across the phylum allows for an extensive assessment of their potential ecosystem roles. The significance of this work is (i) the recovery of a novel genus of Verrucomicrobia from 2.3 km in the subsurface with the ability to withstand the extreme conditions that characterize this environment, and (ii) the most extensive assessment of ecophysiological traits encoded by Verrucomicrobia genomes to date. We show that members of this phylum are specialist organic polymer degraders that can withstand a wider range of environmental conditions than previously thought.

Bacteria of the phylum Verrucomicrobia are prevalent and are particularly common in soil and freshwater environments. Their cosmopolitan distribution and reported capacity for polysaccharide degradation suggests members of Verrucomicrobia are important contributors to carbon cycling across Earth’s ecosystems. Despite their prevalence, the Verrucomicrobia are underrepresented in isolate collections and genome databases; consequently, their ecophysiological roles may not be fully realized. Here, we expand genomic sampling of the Verrucomicrobia phylum by describing a novel genus, “Candidatus Marcellius,” belonging to the order Opitutales. “Ca. Marcellius” was recovered from a shale-derived produced fluid metagenome collected 313 days after hydraulic fracturing, the deepest environment from which a member of the Verrucomicrobia has been recovered to date. We uncover genomic attributes that may explain the capacity of this organism to inhabit a shale gas well, including the potential for utilization of organic polymers common in hydraulic fracturing fluids, nitrogen fixation, adaptation to high salinities, and adaptive immunity via CRISPR-Cas. To illuminate the phylogenetic and environmental distribution of these metabolic and adaptive traits across the Verrucomicrobia phylum, we performed a comparative genomic analysis of 31 publicly available, nearly complete Verrucomicrobia genomes. Our genomic findings extend the environmental distribution of the Verrucomicrobia 2.3 kilometers into the terrestrial subsurface. Moreover, we reveal traits widely encoded across members of the Verrucomicrobia, including the capacity to degrade hemicellulose and to adapt to physical and biological environmental perturbations, thereby contributing to the expansive habitat range reported for this phylum.

IMPORTANCE The Verrucomicrobia phylum of bacteria is widespread in many different ecosystems; however, its role in microbial communities remains poorly understood. Verrucomicrobia are often low-abundance community members, yet previous research suggests they play a major role in organic carbon degradation. While Verrucomicrobia remain poorly represented in culture collections, numerous genomes have been reconstructed from metagenomic data sets in recent years. The study of genomes from across the phylum allows for an extensive assessment of their potential ecosystem roles. The significance of this work is (i) the recovery of a novel genus of Verrucomicrobia from 2.3 km in the subsurface with the ability to withstand the extreme conditions that characterize this environment, and (ii) the most extensive assessment of ecophysiological traits encoded by Verrucomicrobia genomes to date. We show that members of this phylum are specialist organic polymer degraders that can withstand a wider range of environmental conditions than previously thought.

Insights into the effect of different levels of crude oil on hydrolyzed polyacrylamide biotransformation in aerobic and anoxic biosystems: Bioresource production, enzymatic activity, and microbial function

The differences of crude oil recovery ratio resulted in different levels of crude oil in actual hydrolyzed polyacrylamide (HPAM)-containing wastewater. The effect of crude oil on HPAM biotransformation was explored from bioresource production, enzymatic activity and microbial function. In aerobic biosystems, the highest polyhydroxyalkanoate (PHA) yield (19.6%-40.2%) and dehydrogenase (DH) activity (4.06-8.32 mg·g^-1 VSS) occurred in the 48th hour, and increased with crude oil concentration (0-400 mg·L^-1). In anoxic biosystems, the highest PHA yield (24.5%-50.5%) and DH activity (3.24-6.69 mg·g^-1 VSS) occurred in the 72nd hour, and increased with crude oil concentration. The higher substrate removal (38.5%-65.7%) occurred in aerobic biosystems, while the higher PHA accumulation occurred in anoxic biosystems. PHA yield, DH activity and HPAM removal were related. Microbial function related to HPAM biodegradation and PHA synthesis was discussed. The main function of Pseudomonas and Bacillus in aerobic biosystems was to degrade HPAM, and in anoxic biosystems was to synthesize PHA.

Importance of nutrient availability for soluble microbial products formation during a famine period of activated sludge: Evidence from multiple analyses

Much remains unknown about compositional variations in soluble microbial products (SMP) with the shift of the substrate condition from a feast to a famine phase in biological treatment systems. This study demonstrated that the formation of SMP could be suppressed by up to 75% during the famine phase with the addition of essential nutrients. In contrast, presence of electron acceptor did not play any significant role during the stress condition, showing the similar amounts of SMP (r = 0.98, p < 0.05) formation between the bioreactors supplied with air and N₂. The SMP formed in the famine phase was more bio-refractory in the famine versus the feast phase with a linear correlation shown between the production and their aromatic structures in the composition (R² > 0.95). The fluorescence excitation-emission matrix coupled with parallel factor analysis (EEM-PARAFAC) revealed the presence of four different fluorescent components, including two protein-like (C1 and C4), fulvic-like (C2), and humic-like (C3) components, in the SMP and bEPS formed at different conditions. Both C1 and C4 showed increasing trends (R² > 0.95) with the length of starvation in the bioreactors without essential nutrients. Nutrient availability was found to be a key factor to quench the production of large-sized biopolymers. This study provides a wealth of information on operation conditions of activated sludge treatment systems to minimize large sized SMP molecules (particularly proteins), which typically exert many environmental concerns to effluent organic matter quality.

Biodegradation of hydrolyzed polyacrylamide by a Bacillus megaterium strain SZK-5: Functional enzymes and antioxidant defense mechanism

Hydrolyzed polyacrylamide (HPAM) is the most widely used water-soluble linear polymer with high molecular weight in polymer flooding. Microbiological degradation is an environment-friendly and effective method of treating HPAM-containing oilfield produced water. In this study, a strain SZK-5 that could degrade HPAM was isolated from soil contaminated by oilfield produced water. Based on morphological, biochemical characteristics and 16S rDNA sequence homology analysis, the strain was identified as Bacillus megaterium. The biodegradation capability of strain SZK-5 was determined by incubation in a mineral salt medium (MSM) containing HPAM under different environmental conditions, showing 55.93% of the HPAM removed after 7 d of incubation under the optimum conditions ((NH₄)₂SO₄ = 1667.9 mg L^-1, temperature = 24.05 °C and pH = 8.19). Cytochrome P450 (CYP) and urease (URE) played significant roles in biological carbon and nitrogen removal, respectively. The strain SZK-5 could resist the damages caused by oxidative stress given by crude oil and HPAM. To our knowledge, this is the first report about the biodegradation of HPAM by B. megaterium. These results suggest that strain SZK-5 might be a new auxiliary microbiological resource for the biodegradation of HPAM residue in wastewater and soil.

High temperature utilization of PAM and HPAM by microbial communities enriched from oilfield produced water and activated sludge

Non-hydrolyzed polyacrylamide (PAM) and partially hydrolyzed polyacrylamide (HPAM) are commonly used polymers in various industrial applications, including in oil and gas production operations. Understanding the microbial utilization of such polymers can contribute to improved recovery processes and help to develop technologies for polymer remediation. Microbial communities enriched from oilfield produced water (PW) and activated sludge from Alberta, Canada were assessed for their ability to utilize PAM and HPAM as nitrogen and carbon sources at 50 °C. Microbial growth was determined by measuring CO₂ production, and viscosity changes and amide concentrations were used to determine microbial utilization of the polymers. The highest CO₂ production was observed in incubations wherein HPAM was added as a nitrogen source for sludge-derived enrichments. Our results showed that partial deamination of PAM and HPAM occurred in both PW and sludge microbial cultures after 34 days of incubation. Whereas viscosity changes were not observed in cultures when HPAM or PAM was provided as the only carbon source, sludge enrichment cultures amended with HPAM and glucose showed significant decreases in viscosity. 16S rRNA gene sequencing analysis indicated that microbial members from the family Xanthomonadaceae were enriched in both PW and sludge cultures amended with HPAM or PAM as a nitrogen source, suggesting the importance of this microbial taxon in the bio-utilization of these polymers. Overall, our results demonstrate that PAM and HPAM can serve as nitrogen sources for microbial communities under the thermophilic conditions commonly found in environments such as oil and gas reservoirs.

Biodegradability enhancement of hydrolyzed polyacrylamide wastewater by a combined Fenton-SBR treatment process

An efficient way to solve the environmental pollution deriving from hydrolyzed polyacrylamide (HPAM)-containing drilling wastewater is urgent. This work adopted a novel method coupling Fenton oxidation with sequencing batch reactor (SBR) to treat gas-field drilling wastewater successively. This Fenton-SBR process reduced COD, HPAM, NH₄⁺-N and total phosphorus (TP) concentrations of drilling wastewater by 98.35%, 87.58%, 94.50% and 93.52%, respectively. While simulated HPAM wastewater with similar HPAM concentration to Fenton-oxidized drilling wastewater was treated only by biological process, and the COD and HPAM removal efficiencies reached 78.26% and 62.95%. The result indicates that the biodegradability of the drilling wastewater was enhanced after Fenton oxidation. Moreover, the analysis on microbial community structure indicates the dominant bacteria in treated drilling wastewater were different from that in treated simulated-wastewater. It can be considered the Fenton-SBR process possesses potential to be applied to treating the drilling wastewater.

Screening and Immobilizing the Denitrifying Microbes in Sediment for Bioremediation

In this study, immobilized microbial beads were proposed as a solution for excessive nitrogen concentration of the river sediment. The predominant denitrifying microbes were screened from the river sediment. The optimized production of immobilized microbial beads and long-term nitrogen removal efficiency were investigated. 16S rRNA gene sequencing analysis showed that denitrifying bacteria such as Pseudomonas, Alcaligenes, Proteiniclasticum, Achromobacter and Methylobacillus were dominant microflora in the enriched microbial agent, which accounted for 94.43% of the total microbes. Pseudomonas belongs to Gammaproteo bacteria, accounting for 49.22% and functioned as the most predominant denitrifying bacteria. The material concentration of 8% polyvinyl alcohol, 0.5% sodium alginate and 12.5% microbial biomass were found to be the optimal immobilizing conditions. The NH4+-N and total nitrogen (TN) removal rates in sediment with dosing immobilized microbial beads were estimated as 68.1% and 67.8%, respectively, when compared to the dosing liquid microbial agent were 50.5% and 49.3%. Meanwhile, the NH4+-N and TN removal rates in overlying water went up from 53.14% to 59.69% and from 68.03% to 78.13%, respectively, by using immobilized microbial beads.

Bio-inspired nitric-oxide-driven nanomotor

Current chemical-fuel-driven nanomotors are driven by gas (e.g. H₂, O₂, NH₃) which only provides motion ability, and can produce waste (e.g. Mg(OH)₂, Pt). Here, inspired by endogenous biochemical reactions in the human body involving conversion of amino acid L-arginine to nitric oxide (NO) by NO synthase (NOS) or reactive oxygen species (ROS), we report on a nanomotor made of hyperbranched polyamide/L-arginine (HLA). The nanomotor utilizes L-arginine as fuel for the production of NO both as driving force and to provide beneficial effects, including promoting endothelialisation and anticancer effects, along with other beneficial by-products. In addition, the HLA nanomotors are fluorescent and can be used to monitor the movement of nanomotors in vivo in the future. This work presents a zero-waste, self-destroyed and self-imaging nanomotor with potential biological application for the treatment of various diseases in different tissues including blood vessels and tumours.

Depletion of propellant in chemical-fuel-driven nanomotors is a limiting factor in device design and application. Here, the authors create a nitric-oxide-generating nanoparticle and explore cellular uptake and application of the nanomotors in nitric oxide treatments.

Sediment in-situ bioremediation by immobilized microbial activated beads: Pilot-scale study

A field study was carried out to investigate the sediment in-situ bioremediation by adding microbial activated beads. In this work, Calcium carbonate, silicon dioxide, activated carbon powder, attapulgite powder, sodium alginate, microbial liquid and polyvinyl alcohol were utilized to make the immobilized microbial activated beads. Field experiment results showed that the removal rate of NH₄⁺-N, TN and COD in overlying water reached about 61.8%, 87.5% and 87.1%, respectively. The initial concentration of NH₄⁺-N, TN and COD was 159 mg/L, 6.24 mg/L and 7.28 mg/L, whereas and the final concentration was 58 mg/L, 0.78 mg/L and 0.94 mg/L when water temperature, DO, pH and C/N ratio were 25-30 °C, 2-3 mg/L, 7.0-8.0 and 10-15, respectively. Moreover, under optimal temperature condition (25-30 °C), the removal rate of TOC, TN, heterotrophic bacteria and sulfur bacteria in the river sediment reached to 46.5%, 50.7%, 39.2% and 73.2%, respectively.

Microbial Degradation of Forensic Samples of Biological Origin: Potential Threat to Human DNA Typing

Forensic biology is a sub-discipline of biological science with an amalgam of other branches of science used in the criminal justice system. Any nucleated cell/tissue harbouring DNA, either live or dead, can be used as forensic exhibits, a source of investigation through DNA typing. These biological materials of human origin are rich source of proteins, carbohydrates, lipids, trace elements as well as water and, thus, provide a virtuous milieu for the growth of microbes. The obstinate microbial growth augments the degradation process and is amplified with the passage of time and improper storage of the biological materials. Degradation of these biological materials carriages a huge challenge in the downstream processes of forensic DNA typing technique, such as short tandem repeats (STR) DNA typing. Microbial degradation yields improper or no PCR amplification, heterozygous peak imbalance, DNA contamination from non-human sources, degradation of DNA by microbial by-products, etc. Consequently, the most precise STR DNA typing technique is nullified and definite opinion can be hardly given with degraded forensic exhibits. Thus, suitable precautionary measures should be taken for proper storage and processing of the biological exhibits to minimize their decaying process by micro-organisms.

Anaerobic biodegradation of partially hydrolyzed polyacrylamide in long-term methanogenic enrichment cultures from production water of oil reservoirs

The increasing usage of partially hydrolyzed polyacrylamide (HPAM) in oilfields as a flooding agent to enhance oil recovery at so large quantities is an ecological hazard to the subsurface ecosystem due to persistence and inertness. Biodegradation of HPAM is a potentially promising strategy for dealing with this problem among many other methods available. To understand the responsible microorganisms and mechanism of HPAM biodegradation under anaerobic conditions, an enrichment culture from production waters of oil reservoirs were established with HPAM as the sole source of carbon and nitrogen incubated for over 328 days, and analyzed using both molecular microbiology and chemical characterization methods. Gel permeation chromatography, High-pressure liquid chromatography and Fourier-transformed infrared spectroscopy results indicated that, after 328 days of anaerobic incubation, some of the amide groups on HPAM were removed and released as ammonia/ammonium and carboxylic groups, while the carbon backbone of HPAM was converted to smaller polymeric fragments, including oligomers and various fatty acids. Based on these results, the biochemical process of anaerobic biodegradation of HPAM was proposed. The phylogenetic analysis of 16S rRNA gene sequences retrieved from the enrichments showed that Proteobacteria and Planctomycetes were the dominant bacteria in the culture with HPAM as the source of carbon and nitrogen, respectively. For archaea, Methanofollis was more abundant in the anaerobic enrichment. These results are helpful for understanding the process of HPAM biodegradation and provide significant insights to the fate of HPAM in subsurface environment and for possible bioremediation.