Decolorization of malachite green, decolorization kinetics and stoichiometry of ozone-malachite green and removal of antibacterial activity with ozonation processes

Novel small multidrug resistance protein Tmt endows the Escherichia coli with triphenylmethane dyes bioremediation capability

Dye contamination in printing and dyeing wastewater has long been a major concern due to its serious impact on both the environment and human health. In the quest for bioremediation of these hazardous dyes, biological resources such as biodegradation bacteria and enzymes have been investigated in severely polluted environments. In this context, the triphenylmethane transporter gene (tmt) was identified in six distinct clones from a metagenomic library of the printing and dyeing wastewater treatment system. Escherichia coli expressing tmt revealed 98.1% decolorization efficiency of triphenylmethane dye malachite green within 24 h under shaking culture condition. The tolerance to malachite green was improved over eightfold in the Tmt strain compared of the none-Tmt expressed strain. Similarly, the tolerance of Tmt strain to other triphenylmethane dyes like crystal violet and brilliant green, was improved by at least fourfold. Site-directed mutations, including A75G, A75S and V100G, were found to reinforce the tolerance of malachite green, and double mutations of these even further improve the tolerance. Therefore, the tmt has been demonstrated to be a specific efflux pump for triphenylmethane dyes, particularly the malachite green. By actively pumping out toxic triphenylmethane dyes, it significantly extends the cells tolerance in a triphenylmethane dye-rich environment, which may provide a promising strategy for bioremediation of triphenylmethane dye pollutants in the environments.

Simultaneous conversion of chromium and malachite green coexists in halophilic bacterium Halomonas xianhensis SUR308 isolated from a solar saltern

Many industries are known to use heavy metals like chromium (Cr) to fix dyes in the fabrication processes and malachite green (MG) as colorant. Alkalinity, elevated temperature, or salinity of the industrial effluents makes conventional physicochemical removal of MG and hexavalent chromium [Cr(VI)] more difficult to apply and demands to perceive potential cost-effective and environment-friendly treatment methods to eliminate or convert them into less toxic compounds. Here, we report simultaneous removal and bioconversion of MG and Cr(VI) by a halophilic biofilm-forming bacterium Halomonas xianhensis SUR308. It can efficiently produce exopolysaccharides as extracellular polymeric substances (EPS) and form biofilm under oxygen limiting condition. The reduction of hexavalent chromium [Cr(VI)] to trivalent chromium [Cr(III)] is about 100%, and 95% after 84 h of growth in shaken and stagnant culture, respectively. The strain completely decolorizes MG after 48 h of growth in shaken culture. Furthermore, we found that strain SUR308 can efficiently detoxify chromium by reduction and degrades MG via producing various intermediate products simultaneously. Most interestingly, such conversions can also take place in alkaline environment and in environment where substantial amount of salt is present. These unique features of strain SUR308 make it suitable for the simultaneous remediation of toxic heavy metals and hazardous dye even from the environment having higher pH and salinity. The detail molecular mechanism of the bioconversion with its application in open environment would be the future research focus for bioprospecting strain SUR308.

Fabrication of calix[4]arene/polyurethane for the adsorptive removal of cationic dye from aqueous solutions

Calix[4]arene/polyurethane (C4PU) has been synthesized and characterized as an alternative adsorbent for the adsorption of methylene blue (MB) and malachite green (MG) dyes from the aqueous solution. C4PU was synthesized by reacting p-tert-butyl calix[4]arene with hexamethylene diisocyanate (HMDI) as the cross-linking agent. Different polymer ratios were synthesized, and C4PU-4 shows better adsorption than other ratios. The polymer was characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) analysis, and point of zero charges (pHPZC). The isotherms and kinetics of the adsorption of MB and MG were studied under a range of experimental conditions, including pH, adsorbent dosage, initial dye concentration, and contact time. The adsorption was determined by the adsorption percentage of MB and MG dyes from the solution. The Langmuir isotherm model best describes the adsorption process for both dyes, and it follows a pseudo-second-order kinetic model, with the maximum adsorption capacity (qmax) of MB and MG, respectively, was found to be 1.991 mg·g-1 and 2.240 mg·g-1.

Effective removal of malachite green from local dyeing wastewater using zinc-tungstate based materials

The frequent use of an industrial dye such as malachite green (MG) has caused major water body deterioration and is one of the most pressing global challenges, demanding effective treatment techniques. To solve these issues, a simplistic method was developed to synthesize zinc-tungstate (ZnWO4) nanoparticles and also dope the surface matrix of the ZnWO4 nanoparticles using nonmetals of boron (B), carbon (C), and nitrogen (N) at different ratios for enhanced MG removal from wastewater. The prepared nanomaterials were characterized by different methods for crystal structure composition, surface properties, surface morphology, microstructures, functional groups, and elemental oxidation states. The BET analysis revealed a mesoporous structure with surface areas of 30.740 m2/g for ZnWO4, 38.513 m2/g for ZnWO4@BCN, 37.368 m2/g for ZnWO4@BCN/B, 39.325 m2/g for ZnWO4@BCN/C, and 45.436 m2/g for ZnWO4@BCN/N nanocomposites. The best removal of MG was accomplished at pH (8), contact period (50 min), nanoadsorbent dose (0.8 g/L), initial MG concentration (20 mg/L), and temperature (303 K). The maximum adsorption capacities of ZnWO4 and ZnWO4@BCN/N towards MG were 218.645 and 251.758 mg/g, respectively. At equilibrium, the Freundlich isotherm and pseudo-second-order kinetic models were the best fits for the experimental data of MG adsorption on both nanoadsorbents. After eight cycles of adsorption and desorption, both ZnWO4 and ZnWO4@BCN/N were found to be good at removing MG, with efficiencies of 71.00 and 74.20%, respectively. Thermodynamic investigations further validated the spontaneity and endothermic nature of the adsorption process. All study findings confirm the nanoadsorbents exceptional capability and economic feasibility for removing MG dye.

Integrating eco-technological approach for textile dye effluent treatment and carbon dioxide capturing from unicellular microalga Chlorella vulgaris RDS03: a synergistic method

A pilot-scale treatment method was used in the present study to test the biosorption of textile dye from textile effluent and carbon dioxide using Chlorella vulgaris RDS03. The textile dye effluent treatment achieved that textile dye biosorption capacity (q_max) rate of 98.84% on 15 days of treatment using Chlorella vulgaris RDS03. The Langmuir and Freundlich isotherm kinetics model indicated that the higher R² value 0.98. The microalga Chlorella vulgaris RDS03 was captured-96.86% of CO₂ analyzed by CO₂ utilization and biofixation kinetics, 4.65 mgmL^-1 of biomass, 189.26 mgg^-1 of carbohydrate, 233.89 mgg^-1 of lipid, 4.3 mLg^-1 of bioethanol and 4.9 mLg^-1 of biodiesel produced. We performed fatty acid methyl ester (FAME) profiling using gas chromatography-mass spectrometry (GCMS). We found 40 types of biodiesel compounds, specifically myristic acid, pentadecanoic acid, octadecanoic acid, palmitic acid, and oleic acid. The high-performance liquid chromatography (HPLC) validated and analyzed the produced bioethanol.Novelty of the Research• Unicellular microalga Chlorella vulgaris RDS03 was isolated from the freshwater region and investigated their biosorption efficiency against hazardous synthetic azo textile dyes.• Chlorella vulgaris RDS03 ability to biosorption 96.86% of environmental polluted carbon dioxide• Treated biomass was used to produce ecofriendly, unpolluted and green energy such as biofuels (biodiesel and bioethanol).

Engineering globins for efficient biodegradation of malachite green: two case studies of myoglobin and neuroglobin

Engineered globins such as H64D Mb and A15C/H64D Ngb were efficient in the degradation of malachite green, with activities much higher than those of some native enzymes.

Combination of the endophytic manganese-oxidizing bacterium Pantoea eucrina SS01 and biogenic Mn oxides: An efficient and sustainable complex in degradation and detoxification of malachite green

Recently, Mn oxides (MnOxs) have been attracting considerable interest in the oxidation of organic pollutants. However, the reduction of MnOx in these reactions leads to the deactivation of the catalyst, which must be frequently regenerated. We evaluated the application of a manganese-oxidizing bacterium (MOB) and MnOx in removing toxic dyes. We studied the co-function of a plant-endophytic MOB, Pantoea eucrina SS01, with its bio-generated MnOx and evaluated the detoxification activity and chemical transformation mechanisms of the complex in malachite green (MG) degradation. We found a synergistic effect between MnOx and the strain. Particularly, strain SS01 could adsorb MG but could not degrade it, whereas the addition of Mn(II) promoted MG degradation by the formation of a complex containing the bacterium and MnOx aggregates (SS01-bio-MnOx), with distinct morphology characteristics. The complex showed a marked sustainability in the degradation of MG into less toxic or non-toxic metabolites. In this process, strain SS01 might have enhanced the regeneration of MnOx, accelerating MG degradation. Our data not only contribute to understanding the mechanism of MG removal by the SS01-bio-MnOx complex, but also provide a scientific basis for the future application of MOB and MnOx.

Aquaculture drug degradation in persulfate by PANI-based microparticles controlled via ultrasonic field: Forced motion of "burning hot micromotors"

The triphenylmethane derivative malachite green (tpm_MaG) despite repeated prohibitions but is frequently detected in aquatic environment and draws emerging attention because of the potential poisonous effects. The polyaniline/persulfate with ultrasound catalysis (US/PANI-PS) was developed for tpm_MaG removal. The effects of 12 factors and the optimization by response surface methodology (RSM) for tpm_FG removal were evaluated based on the pseudo-first-kinetics (k_obs). From free radical inhibition, the ratios of active species in US/PANI-PS (δ₁₁ = 0.355, δ₁₂ = 0.593) were close to that in US-PS (δ₂₁ = 0.346, δ₂₂ = 0.586) and different to that in PANI-PS and PS systems. A possible degradation pathway (hydroxylation, N-demethylation, deamination, and open-benzene ring) was explored by gas chromatography-mass spectrometer (GC/MS) and high performance liquid chromatography-mass spectrometer (HPLC-MS). The designed reactor involving the US-driven PANI was simulated by acoustic-piezoelectric interaction. From cavitation calculations, the estimated effective-mean temperature at bubble-water interface had little increasing (from 704 K to 711 K) after adding the PANI, however, the adsorption capacity of tpm_MaG in reactive zone decreased from 0.0891 μM to 0.0787 μM. The mechanism (PANI hot turbo-micromotors) with US/PANI-PS was proposed. The tpm_MaG was removed with a low treatment cost of 2.81 $⋅m^-3 (the EE/O value 18.29 kWh⋅m^-3) by US/PANI-PS, presenting a cost-effective treating process. The reusability tests and characterizations (contact angle, X-ray diffraction (XRD), and scanning electron microscope (SEM)) further confirmed the stability of PANI.

Degradation of basic violet 16 dye by electro-activated persulfate process from aqueous solutions and toxicity assessment using microorganisms: determination of by-products, reaction kinetic and optimization using Box–Behnken design

This study was performed to determine the efficiency of the electro/persulfate process to remove basic violet 16 (BV16) dye and COD from aqueous solutions. The present study was experimentally performed on a laboratory scale. The effect of pH on the process was investigated independently, and after performing the experiments, the effect of voltage (volts), the dose of persulfate (g/L), initial concentration of BV16 dye, and electrolysis time was investigated with the model presented by Box Behnken design, and optimal conditions for BV16 dye removal was obtained. Under optimal conditions, COD removal efficiency and toxicity changes during the process were calculated, and the effect of distance between electrodes and surface of electrodes on process efficiency was investigated. By-products of oxidative degradation were determined with LS-MS. The amount of electrical energy consumed by the process was investigated by voltage changes and then the kinetics of the process was investigated by a pseudo-first-order model. The results showed that the electro/persulfate process in optimal conditions including pH of 5, a voltage of 11.43 V, persulfate dose of 0.09 g/L, initial BV16 concentration of 45 mg/L, and electrolysis time of 48.5 min could provide BV16 dye removal efficiency of 95% and COD removal efficiency of 57.14%. Findings of electrical energy consumption showed that with increasing voltage, the efficiency of the process increased, but the amount of energy consumption also increased. Under optimal conditions, increasing distance between the electrodes was led to a decrease in removal efficiency, but the removal efficiency increased with the increasing surface of the electrodes. Based on the kinetic results, the electro/persulfate process followed pseudo-first-order kinetics with R 2 = 0.9956. The present study showed that the electro/persulfate process as a useful technique has high efficiency in removing BV16 dye and its toxicity from aqueous solutions and can be effective and useful in removing the COD of solution.

Extracellular expression of mutant CotA-laccase SF in Escherichia coli and its degradation of malachite green

In this study, mutant CotA-laccase SF was successfully expressed in Escherichia coli by co-expression with phospholipase C. The optimized extracellular expression of CotA-laccase SF was 1257.22 U/L. Extracellularly expressed CotA-laccase SF exhibits enzymatic properties similar to intracellular CotA-laccase SF. CotA-laccase SF could decolorize malachite green (MG) under neutral and alkaline conditions. The K_m and k_cat values of CotA-laccase SF to MG were 39.6 mM and 18.36 s^-1. LC-MS analysis of degradation products showed that MG was finally transformed into 4-aminobenzophenone and 4-aminophenol by CotA-laccase. The toxicity experiment of garlic root tip cell showed that the toxicity of MG metabolites decreased. In summary, CotA-laccase SF had a good application prospect for degrading malachite green.

Development of a novel three-dimensional magnetic polymer aerogel as an efficient adsorbent for malachite green removal

A novel three-dimensional (3D) magnetic bacterial cellulose nanofiber/graphene oxide polymer aerogel (MBCNF/GOPA) composed of bacterial cellulose nanofibers (BCNFs), Fe₃O₄ nanoparticles, graphene oxide (GO) nano-sheets, and polyvinyl alcohol (PVA) was developed by combining a facile filler-loaded networks method with a vacuum freeze-drying process for the removal of malachite green (MG) dye from aqueous solution. The influence of various factors on adsorption, including initial dye concentration, adsorbent dosage, contact time, temperature, and pH of dye solution, was then investigated. The adsorbent preserved a high adsorption capacity over a wide range of pH conditions. Moreover, the adsorption isotherms data fitted well with the Langmuir isotherm model with a maximum adsorption capacity of 270.27 mg g^-1. Adsorption kinetics followed the pseudo-second-order model, and the thermodynamic parameters showed that the adsorption of MG dye was feasible and endothermic in nature and occurred spontaneously. Therefore, owing to its demonstrated properties such as 3D interconnected porous structure, lightweight, large specific surface area, superparamagnetic behavior at room temperature, excellent adsorbent efficiency (93% removal) and also its simple and eco-friendly synthesis process, MBCNF/GOPA could be considered a promising candidate for removing cationic dye pollutants from aqueous solution, which can easily be collected from aqueous solution by a small magnet. MBCNF/GOPA also showed favorable reusability for MG removal in wastewater treatment, and its application in different water samples for the removal of MG dye molecules from "real" samples was successfully performed.

Temperature and magnetic dual responsive restricted access material for the extraction of malachite green from crucian and shrimp samples

A restricted access material that does not need organic solvents during elution was prepared for the extraction of malachite green.

Treatments for color removal from wastewater: State of the art

It is evident from many recent papers that release of colored wastewater into the environment is source of pollution and this is a problem that particularly affect textile, dyeing and food industries. The review: (i) presents an analysis of various mechanisms involved in the different processes for color removal; (ii) describes conveniences and disadvantages that may exist in adopting one type of treatment in spite of another; (iii) reports the results of approximately 180 experimental tests. Both examples of treatments already widely applied to the real scale and still in the experimental phase are reported. This work focuses on different types of chemical/physical, chemical, electrochemical and biological processes applied in the field of color removal from industrial wastewater. Common chemical/physical treatments such as coagulation/flocculation, adsorption and membrane filtration as well as chemical-type processes are discussed, both those that exploit the traditional oxidizing chemical agents such as Ozone, H₂O₂ and reactive based on chlorine and those based on the principle of advanced chemical oxidation. In particular, both Hydroxyl radical based Advanced Oxidation Processes (AOPs) and Sulfate radical based AOPs are reported. The most commonly used Electrochemical processes for the removal of color are also presented as well as biological treatments. Based on more than 200 papers, this review provides important information on the use, effectiveness, advantages and downsides of the various treatments aimed at removing the color from the wastewater with a look at the technologies still under development.

Studies on removal of phenol sulfonic acid-syntan in aqueous medium using ozonation

The removal of phenol sulfonic acid-syntan (PSAS) in terms of chemical oxygen demand (COD) was studied at different pH, ozone and initial PSAS concentrations and the optimum condition was found to be pH 7, ozone concentration of 5.2 × 10^-3mmol/L and initial PSAS concentration of 500 mg/L. The increase in BOD₅/COD ratio confirmed the bio-treatability of ozonated PSAS effluent. The excitation-emission matrix intensity and Fourier transmission infra-red spectroscopy confirmed the generation of intermediate by-product during degradation of PSAS. The ozonation of PSAS was found to obey fast regime pseudo-first-order reaction with a rate constant of 3.7 × 10^-9 mol^-1 s^-1. The mean oxidation state of carbon value between +2 and +3 confirmed that the ozonation of PSAS resulted in partial mineralization.

Degradation and detoxification of the triphenylmethane dye malachite green catalyzed by crude manganese peroxidase from Irpex lacteus F17

Malachite green (MG), a recalcitrant, carcinogenic, and mutagenic triphenylmethane dye, was decolorized and detoxified using crude manganese peroxidase (MnP) prepared from the white rot fungus Irpex lacteus F17. In this study, the key factors (pH, temperature, MG, Mn(2+), H2O2, MnP) in these processes were investigated. Under optimal conditions, 96 % of 200 mg L(-1) of MG was decolorized when 66.32 U L(-1) of MnP was added for 1 h. The K m, V max, and k cat values were 109.9 μmol L(-1), 152.8 μmol L(-1) min(-1), and 44.5 s(-1), respectively. The decolorization of MG by MnP followed first-order reaction kinetics with a kinetic rate constant of 0.0129 h(-1). UV-vis and UPLC analysis revealed degradation of MG. Furthermore, seven different intermediates formed during the MnP treatment of 0.5 h were identified by LC-TOF-MS. These degradation products were generated via two different routes by either N-demethylation of MG or the oxidative cleavage of the C-C double bond in MG. Based on ecotoxicity analyses performed on bacteria and algae, it was confirmed that MG metabolites produced by the MnP-catalyzed system were appreciably less toxic than the parent compound. These studies indicate the potential use of this enzyme system in the clean-up of aquatic and terrestrial environments.

Degradation of chlorophenols and alkylphenol ethoxylates, two representative textile chemicals, in water by advanced oxidation processes: the state of the art on transformation products and toxicity

Advanced oxidation processes based on the generation of reactive species including hydroxyl radicals are viable options in eliminating a wide array of refractory organic contaminants in industrial effluents. The assessment of transformation products and toxicity should be, however, the critical point that would allow the overall efficiency of advanced oxidation processes to be better understood and evaluated since some transformation products could have an inhibitory effect on certain organisms. This article reviews the most recent studies on transformation products and toxicity for evaluating advanced oxidation processes in eliminating classes of compounds described as "textile chemicals" from aqueous matrices and poses questions in need of further investigation. The scope of this paper is limited to the scientific studies with two classes of textile chemicals, namely chlorophenols and alkylphenol ethoxylates, whose use in textile industry is a matter of debate due to health risks to humans and harm to the environment. The article also raises the critical question: What is the state of the art knowledge on relationships between transformation products and toxicity?

Decolorisation of Reactive Red 120 Dye by Using Single-Walled Carbon Nanotubes in Aqueous Solutions

Dyes are one of the most hazardous chemical compound classes found in industrial effluents and need to be treated since their presence in water bodies reduces light penetration, precluding the photosynthesis of aqueous flora. In the present study, single-walled carbon nanotubes (SWCNTs) was used as an adsorbent for the successful removal of Reactive Red 120 (RR-120) textile dye from aqueous solutions. The effect of various operating parameters such as initial concentration of dye, contact time, adsorbent dosage and initial pH was investigated in order to find the optimum adsorption conditions. Equilibrium isotherms were used to identify the possible mechanism of the adsorption process. The optimum pH for removing of RR-120 dye from aqueous solutions was found to be 5 and for this condition maximum predicted adsorption capacity for RR-120 dye was obtained as 426.49 mg/g. Also, the equilibrium data were also fitted to the Langmuir, Freundlich and BET equilibrium isotherm models. It was found that the data fitted to BET (R2=0.9897) better than Langmuir (R2=0.9190) and Freundlich (R2=0.8819) model. Finally it was concluded that the single-walled carbon nanotubes can be used for dye removal from aqueous solutions.

Removal of chloropyrifos ethyl, tetradifon and chlorothalonil pesticide residues from citrus by using ozone

The removal of chloropyrifos ethyl, tetradifon and chlorothalonil pesticide residues from the lemon, orange and grapefruit matrices were achieved by ozonation. All of chlorothalonil residues adsorbed onto the orange matrix were completely removed after 5 min ozonation. The highest removal percentages of tetradifon and chloropyrifos ethyl were achieved as 98.6 and 94.2%, respectively for the lemon and grapefruit matrices. All of diffused chlorothalonil and chloropyrifos ethyl residues were completely removed from both orange and grapefruit matrices after 5 min ozonation. Increasing of applied ozone dosage was not significantly effect on the removal percentages of pesticides whereas increasing of ozonation temperature caused a negative effect on the removal percentages of pesticides. The washing of the matrices with tap water was not as effective as ozonation in the removal of residual pesticides. Our results show that ozone treatment has a great potential for removing of residual pesticides from lemon, orange and grapefruit matrices.

Degradation of Malachite green by Potassium persulphate, its enhancement by 1,8-dimethyl-1,3,6,8,10,13-hexaazacyclotetradecane nickel(II) perchlorate complex, and removal of antibacterial activity

In this study, degradation of Malachite green (MG) (10mg/L) by Potassium persulphate (KPS) (1 g/L), and KPS in presence of (1,8-dimethyl-1,3,6,8,10,13-hexaazacyclotetradecane) nickel(II) perchlorate (complex1), (200 μM), was investigated by spectrophotometric and HPLC methods. KPS alone had ability to degrade MG. Interestingly, rate of degradation of MG was enhanced upon addition of complex1. Degradation was effective at pH range of 3-9 and was found to be dependent on initial concentration of KPS, complex1, MG, and pH. Degradation of MG by KPS was not significantly affected in presence of Ni(II) ions whereas in presence of Fe(II) ions degradation was incomplete. Ability of KPS to reduce TOC increased in presence of complex1. Transformation products were analysed by LC-ESI-MS. Finally, treatment of MG with complex1 and KPS resulted in removal of antibacterial activity of MG under in vitro conditions.

A rapid and low energy consumption method to decolorize the high concentration triphenylmethane dye wastewater: operational parameters optimization for the ultrasonic-assisted ozone oxidation process

This research set up an ultrasonic-assisted ozone oxidation process (UAOOP) to decolorize the triphenylmethane dyes wastewater. Five factors - temperature, initial pH, reaction time, ultrasonic power (low frequency 20 kHz), and ozone concentration - were investigated. Response surface methodology was used to find out the major factors influencing color removal rate and the interactions between these factors, and optimized the operating parameters as well. Under the experimental conditions: reaction temperature 39.81 °C, initial pH 5.29, ultrasonic power 60 W and ozone concentration 0.17 g/L, the highest color removals were achieved with 10 min reaction time and the initial concentration of the MG solution was 1000 mg/L. The optimal results indicated that the UAOOP was a rapid, efficient and low energy consumption technique to decolorize the high concentration MG wastewater. The predicted model was approximately in accordance with the experimental cases with correlation coefficients R(2) and R(adj)(2) of 0.9103 and 0.8386.

Degradation of Acid Red 274 using H2O2 in subcritical water: application of response surface methodology

In this research, the degradation of Acid Red 274 (AR 274) was investigated under subcritical water conditions using H(2)O(2), which led to the oxidative degradation of Acid Red 274 up to its 80% of mineralization. The Box-Behnken design matrix and response surface methodology (RSM) were applied in designing the experiments for evaluating the interactive effects of the three most important operating variables. Thus, the interactive effects of temperature (100-250°C), oxidant (H(2)O(2)) concentration (50-250 mM), and time (30-60 min.) on the degradation of AR 274 were investigated. A total of 17 experiments were conducted in this research, and the analysis of variance (ANOVA) indicated that the proposed quadratic model could be used for navigating the design space. The proposed model was essentially in accordance with the experimental case with correlation coefficient R(2)=0.9930 and Adj-R(2)=0.9839, respectively. The results confirmed that RSM based on the Box-Behnken design was a compatible method for optimizing the operating conditions of AR 274 degradation.

Retention-oxidation-adsorption process for emergent treatment of organic liquid spills

The feasibility and effectiveness of retention-oxidation-adsorption process (ROA) for the elimination of organic contaminants induced by chemical accidents were investigated in this study. Organobentonites (DTMA-, TTA-, CTMA- and OTMA-bentonite), potassium ferrate (Fe(VI)), ozone and granular activated carbon (GAC) were used as rapid and efficient materials in the treatment and recovery of organic liquid spills. Results indicated that the retention capacities of organobentonites (especially CTMA-bentonite) were much higher than that of natural bentonite towards the chosen organic compounds. Additionally, pH, oxidant dosage, initial concentration of contaminant and chemical structure had significant influences on the effectiveness of the oxidation process. In a pilot-scale experiment, the ferrate/GAC (F/G) and ozone/GAC (O/G) processes made a comparatively good performance in the treatment of wastewater containing aniline or nitrobenzene, with the removal efficiencies of the contaminants greater than 80%. Overall, the ROA process showed a high efficiency and steady operation in the removal of hazardous organic liquids and subsequent clean up of the contaminated site.