Recycling of solvent used in a solvent extraction of petroleum hydrocarbons contaminated soil

Surfactant-Based Chemical Washing to Remediate Oil-Contaminated Soil: The State of Knowledge

As the energy demand increases, there is a significant expansion and utilization of oil resources, resulting in the inevitable occurrence of environmental pollution. Oil has been identified as a prevalent soil contaminant, posing substantial risks to the soil ecosystems. The remediation of soil contaminated with oil is a formidable undertaking. Increasing evidence shows that chemical washing, a remediation technique employing chemical reagents like surfactants to augment the solubilization, desorption, and separation of petroleum hydrocarbons in soil, proves to be an efficacious approach, but the latest advances on this topic have not been systematically reviewed. Here, we present the state of knowledge about the surfactant-based chemical washing to remediate oil-contaminated soil. Using the latest data, the present article systematically summarizes the advancements on ex situ chemical washing of oil pollution and provides a concise summary of the underlying principles. The use of various surfactants in chemical washing and the factors influencing remediation efficiency are highlighted. Based on the current research status and knowledge gaps, future perspectives are proposed to facilitate chemical washing of oil-polluted soil. This review can help recognize the application of chemical washing in the remediation of oil-polluted soil.

New insights into interaction between oil and solid during hydrothermal treatment of oily sludge

Hydrothermal treatment (HT) can effectively dehydrate and reduce oily sludge (OS) volume, but the resulting hydrothermal oily sludge (HOS) presents greater challenges for washing than the initial oily sludge (IOS). This study examines the effects of HT on OS by analyzing changes in water, oil, and solid. Results indicate that HT considerably decreases the water content in OS while increasing resin and asphaltenes contents. In addition, condensation, side-chain scission, and oxidation reactions occur during the HT process, resulting in coking, agglomeration, and an increase in oxygen-containing groups. This increase, further confirmed by X-ray photoelectron spectroscopy (XPS), enhances the interaction between oil and solids. Calcite, the most prevalent solid-phase component, may form a calcium bridge with the oxygen-containing groups. Moreover, HT reduces the solid particle size, thereby increasing the oil-solid contact area. Interestingly, the process of deasphalting diminishes the interaction between oil and solids, facilitating sludge washing. After washing, the residual oil content in HOS is reduced to less than 0.34%. This study elucidates why HOS is challenging to separate from oil and solids and introduces a novel method that combines dodecylbenzene sulfonic acid (DBSA)-assisted heptane deasphalting with conventional washing techniques. This method shows promise for applications in OS affected by weathering processes.

Remediation of diesel contaminated soil by using activated persulfate with Fe3O4 magnetic nanoparticles: effect and mechanisms

In this study, Fe3O4 magnetic nanoparticles (Fe3O4 MNPs) were assessed for their ability to enhance the activity of persulfate (PS). Various controlling factors including PS dosages, initial pH, water-soil ratio, ratio of Fe2+, and Fe3O4 MNPs to PS were considered in both the Fe2+/PS system and the Fe3O4 MNPs/PS system. Results showed that the Fe3O4 MNP-activated PS system exhibited high processing efficiency owing to the gradual release of Fe2+. This process occurred in a wide pH range (5-11), attributed to the synergistic action of sulfate radicals (SO4-·) and hydroxyl radicals (OH·) under alkaline conditions, effectively mitigating soil acidification. The ratio of Fe3O4 MNPs to PS and water-soil ratio significantly influenced the degradation rate with the highest petroleum hydrocarbon degradation rate exceeding 80% (82.31%). This rate was 3.1% higher than that achieved by the Fe2+/PS system under specific conditions: PS dosage of 0.05 mol/L, Fe3O4 MNPs to PS ratio of 1:10, water-soil ratio of 2:1, and initial pH of 11. Meanwhile, oxidant consumption in the Fe3O4 MNPs/PS system was halved compared to the Fe2+/PS system due to the slow release of Fe2+ and less ineffective consumption of SO4-·. Mechanistically, the possible degradation process was divided into three parts: the initial chain reaction, the proliferating chain reaction, and the terminating chain reaction. The introduction of Fe3O4 MNPs accelerated the degradation rate of pentadecane, heneicosane, eicosane, tritetracontane, and 9-methylnonadecane.

Bioremediation of hazardous pollutants from agricultural soils: A sustainable approach for waste management towards urban sustainability

Soil contamination is perhaps the most hazardous issue all over the world; these emerging pollutants ought to be treated to confirm the safety of our living environment. Fast industrialization and anthropogenic exercises have resulted in different ecological contamination and caused serious dangerous health effects to humans and animals. Agro wastes are exceptionally directed because of their high biodegradability. Effluents from the agro-industry are a possibly high environmental risk that requires suitable, low-cost, and extensive treatment. Soil treatment using a bioremediation method is considered an eco-accommodating and reasonable strategy for removing toxic pollutants from agricultural fields. The present review was led to survey bioremediation treatability of agro soil by microbes, decide functional consequences for microbial performance and assess potential systems to diminish over potentials. The presence of hazardous pollutants in agricultural soil and sources, and toxic health effects on humans has been addressed in this review. The present review emphasizes an outline of bioremediation for the effective removal of toxic contaminants in the agro field. In addition, factors influencing recent advancements in the bioremediation process have been discussed. The review further highlights the roles and mechanisms of micro-organisms in the bioremediation of agricultural fields.

Enhancing low-temperature thermal remediation of petroleum sludge by solvent deasphalting

Thermal treatment is a promising technique for treating petroleum sludge (PS). However, asphaltenes as a recalcitrant fraction of PS induce strong bounding between petroleum and minerals, and therefore lead to the need for high temperature and hence high energy consumption in thermal treatment of PS. In this study, a novel method combining a deasphalting pretreatment of PS with low-temperature thermal desorption (LTTD) was developed. The efficiency of deasphalting was found to be positively correlated to the ability of n-alkanes and asphaltene dispersants in dispersing asphaltenes. In treating six different kinds of PS, the residual oil contents were all below 2.5% after the deasphalting alone. Compared with direct thermal desorption at 600 °C for 1 h, dodecyl benzene sulfonic acid (DBSA)-assisted heptane deasphalting made thermal desorption at 350 °C for 1 h sufficient to treat these APS. The residual oil content of sludge after LTTD is lower than 0.45%. FT-IR, Raman spectra and XPS analysis confirmed that the carbon residue in APS after LTTD is primarily graphite state, which is extremely stable and does not migrate to the surrounding environment as compared with the crude oil in the APS. Hence, solvent deasphalting results in effective treatment of PS by LTTD, while the solvent can be recycled by distillation and crude oil recovered as value-added petroleum resource. The LTTD represents therefore a novel green strategy for treating PS and resource utilization.

Ultrasound-assisted soil washing processes using organic solvents for the remediation of PCBs-contaminated soils

Ultrasonic soil washing processes using organic solvents were investigated for the development of novel remediation technologies for persistent organic pollutants (POPs)- contaminated soils. Aluminum foil erosion was first tested to understand sonophysical activity in water, methanol (polar) and n-hexane (nonpolar) in a 28 kHz double-bath-type sonoreactor. Significant sonophysical damage on the aluminum foil was observed at the antinodes for all solvents, and the order of degree of sonophysical damage was as follows: water > methanol > n-hexane. Subsequently, conventional (mechanical mixing only) and ultrasonic soil washing (mechanical mixing and ultrasound) techniques were compared for the removal of polychlorinated biphenyls (PCBs) from soil. Two types of contaminated soils, fresh (Soil A, C0 = 2.5 mg/kg) and weathered (Soil B, C0 = 0.5 mg/kg), were used and the applied soil-to-liquid (S:L) ratio was 1:5 and 1:10 for methanol and n-hexane, respectively. The polar solvent significantly increased washing efficiencies compared to the nonpolar solvent, despite the nonpolar nature of the PCBs. Washing efficiency was significantly enhanced in ultrasonic soil washing compared to conventional washing, owing to macro- and micro-scale sonophysical actions. The highest washing efficiencies of 90% for Soil A and 70% for Soil B were observed in the ultrasonic washing processes using methanol. Additionally, a single operation of the ultrasonic washing process was superior to two sequential processes with conventional mixing in terms of washing efficiency, consumption of washing agents, treatment of washing leachate, and operation time. Finally, the removal of PCBs in an organic solvent (methanol) was investigated in photolytic and sonolytic processes for the post-treatment of soil washing leachate. A photolysis efficiency of 80% was obtained within 60 min of UV exposure for intensities of 1.0, 2.0, and 4.0 W/cm2. The primary mechanism of PCBs degradation is photolytic dechlorination. In contrast, no degradation was detected in the sonolytic process, as the excess organic solvent acted as a strong radical scavenger.

Application of choline-based deep eutectic solvent for the extraction of crude-oil contaminated soils

Choline-based deep eutectic solvents (DESs) have many outstanding features as they are easy to prepare, inexpensive, low-toxic, low volatile, and biodegradable, which make them increasingly attractive in industrial chemistry and green chemistry. In this paper, the abilities of three different kinds of DESs for crude oil removal from contaminated soils were compared and it was found the DES formed by phenylpropionic acid and choline chloride (mole ratio = 2:1) had the best performance. The effects of extraction time, temperature and the solvent-soil ratio on phenylpropionic acid/choline chloride DES performance were evaluated. The rational extraction conditions were recommended as follows: mass ratio of DES to soil was 10:1 and 60 min extraction time at 80°C. The extraction (desorption) process could be described by Freundlich desorption isotherm mode. In addition, the phenylpropionic acid/choline chloride DES could be recycled and the oil removal efficiency was about 90% after 10 cycles. This finding suggested that choline-based DES extraction was a promising technology for crude oil removal from contaminated soil.

Multifunctional metal-organic frameworks in oil spills and associated organic pollutant remediation

The release of toxic organic compounds into the environment in an event of oil spillage is a global menace due to the potential impacts on the ecosystem. Several approaches have been employed for oil spills clean-up, with adsorption technique proven to be more promising for the total reclamation of a polluted site. Of the several adsorbents so far reported, adsorbent-based porous materials have gained attention for the reduction/total removal of different compounds in environmental remediation applications. The superior potential of mesoporous materials based on metal-organic frameworks (MOFs) against conventional adsorbents is due to their intriguing and enhanced properties. Therefore, this review presents recent development in MOF composites; methods of preparation; and their practical applications towards remediating oil spill, organic pollutants, and toxic gases in different environmental media, as well as potential materials in the possible deployment in reclaiming the polluted Niger Delta due to unabated oil spillage and gas flaring.

Remediation of aristolochic acid-contaminated soil by an effective advanced oxidation process

Aristolochic acids (AAs) are persistent soil pollutants in the agricultural fields of the Balkan Peninsula that are endemic for Aristolochia clematitis L. This class of carcinogenic and nephrotoxic phytotoxins is taken up by crops through root absorption and contaminates staple foods across the peninsula. Human exposure to AAs via dietary intake has recently been recognized as a cause of Balkan endemic nephropathy. For the sake of public health, human exposure to AAs from all sources should be minimized in a timely manner. However, currently, there is no available remediation method to remove AAs from soil. In this study, we developed the first soil remediation method for AAs using Fenton's reagent (FR), a combination of ferrous ion and hydrogen peroxide, and optimized factors, including pH, temperature, time, and dose of FR, to achieve the best degradation performance. The maximum AA degradation efficiency was found to be >97% in soil with 500 μg kg^-1 of AAs. We anticipate that this developed method, mediated via Fenton reaction, will be useful to effectively eliminate AAs from the Balkan farmlands.

A comprehensive guide of remediation technologies for oil contaminated soil - Present works and future directions

Oil spills result in negative impacts on the environment, economy and society. Due to tidal and waves actions, the oil spillage affects the shorelines by adhering to the soil, making it difficult for immediate cleaning of the soil. As shoreline clean-up is the most costly component of a response operation, there is a need for effective oil remediation technologies. This paper provides a review on the remediation technologies for soil contaminated with various types of oil, including diesel, crude oil, petroleum, lubricating oil, bitumen and bunker oil. The methods discussed include solvent extraction, bioremediation, phytoremediation, chemical oxidation, electrokinetic remediation, thermal technologies, ultrasonication, flotation and integrated remediation technologies. Each of these technologies was discussed, and associated with their advantages, disadvantages, advancements and future work in detail. Nonetheless, it is important to note that no single remediation technology is considered the best solution for the remediation of oil contaminated soil.

CAPSULE

This review provides a comprehensive literature on the various remediation technologies studied in the removal of different oil types from soil.

Influence of soil and hydrocarbon properties on the solvent extraction of high-concentration weathered petroleum from contaminated soils

Petroleum ether was used to extract petroleum hydrocarbons from soils collected from six oil fields with different history of exploratory and contamination. It was capable of fast removing 76-94 % of the total petroleum hydrocarbons including 25 alkanes (C11-C35) and 16 US EPA priority polycyclic aromatic hydrocarbons from soils at room temperature. The partial least squares analysis indicated that the solvent extraction efficiencies were positively correlated with soil organic matter, cation exchange capacity, moisture, pH, and sand content of soils, while negative effects were observed in the properties reflecting the molecular size (e.g., molecular weight and number of carbon atoms) and hydrophobicity (e.g., water solubility, octanol-water partition coefficient, soil organic carbon partition coefficient) of hydrocarbons. The high concentration of weathered crude oil at the order of 10(5) mg kg(-1) in this study was demonstrated adverse for solvent extraction by providing an obvious nonaqueous phase liquid phase for hydrocarbon sinking and increasing the sequestration of soluble hydrocarbons in the insoluble oil fractions during weathering. A full picture of the mass distribution and transport mechanism of petroleum contaminants in soils will ultimately require a variety of studies to gain insights into the dynamic interactions between environmental indicator hydrocarbons and their host oil matrix.

Sorption and distribution of asphaltene, resin, aromatic and saturate fractions of heavy crude oil on quartz surface: molecular dynamic simulation

The molecular scale sorption, diffusion and distribution of asphaltene, resin, aromatic and saturate fractions of heavy crude oil on quartz surface were studied using molecular dynamic simulation. Sorption of saturates on quartz decreased by 31% when temperature increased from 298 to 398K while opposite trend was observed for resins, but insignificant changes were found in asphaltenes and aromatics. Despite of this variety, the main contribution of interactions was van der Waals energy (>90%) irrespective of molecular components and temperatures. The diffusion coefficient of saturates was predicted as 10.8×10(-10)m(2)s(-1) while that of the remaining fractions was about 4×10(-10)m(2)s(-1) at 298K. The most likely oil distribution on quartz surface was that aromatics and saturates transported randomly into and out of the complex consisting of asphaltenes surrounded by resins, which was influenced by temperature. Overall, the knowledge on quartz-oil and oil-oil interactions gained in this study is essential for future risk assessment and remediation activities as previous studies on soil remediation either limited to light oil fractions with <40 carbons or treated the heavy crude oil as a single pseudo entity ignoring the interactions between oil fractions.