Complete oxidation of formaldehyde at ambient temperature over supported Pt/Fe2O3 catalysts prepared by colloid-deposition method

Density functional theory-based screening of Ti4C3O2-loaded single atoms for efficient selective catalytic oxidation of formaldehyde

Indoor formaldehyde (HCHO) pollution poses a major risk to human health. Low-temperature catalytic oxidation is an effective method for HCHO removal. The high activity and selectivity of single atomic catalysts provide a possibility for the development of efficient non-precious metal catalysts. In this study, the most stable single-atom catalyst Ti-Ti4C3O2 was screened by density functional theory among many single atomic catalysts with two-dimensional (2D) monolayer Ti4C3O2 as the support. The computational results show that Ti-Ti4C3O2 is highly selective to HCHO and O2 in complex environments. The HCHO oxidation reaction pathways are proposed based on the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) mechanisms. According to the reaction energy and energy span models, the E-R mechanism has a lower maximum energy barrier and higher catalytic efficiency than the L-H mechanism. In addition, the stability of the Ti-Ti4C3O2 structure and active center was verified by diffusion energy barrier and ab initio molecular dynamics simulations. The above results indicate that Ti-Ti4C3O2 is a promising non-precious metal catalyst. The present study provides detailed theoretical insights into the catalytic oxidation of HCHO by Ti-Ti4C3O2, as well as an idea for the development of efficient non-precious metal catalysts based on 2D materials.

Room temperature removal of high-space-velocity formaldehyde boosted by fixing Pt nanoparticles into Beta zeolite framework

Catalytic oxidation of volatile organic compounds like formaldehyde (HCHO) over the noble metals catalysts at room temperature is among the most promising strategies to control indoor pollution but remains one challenge to maximize the efficiency of noble metal species. Herein, we demonstrated the straightforward encapsulation of highly dispersive Pt nanoparticles (NPs) within BEA zeolite and adjacent with the surface hydroxyl groups to reach the synergistic HCHO oxidation at 25 °C. High efficiency and long-term stability was reached under large space velocity (∼100% conversion at 180,000 mL (g_cat × h)^-1 and >95% at 360,000 mL (g_cat × h)^-1), affording rapid elimination rate of 129.4 μmol (g_Pt × s)^-1 and large turnover frequency of 2.5 × 10^-2 s^-1. This is the first synergy example derived from the hydroxyl groups and confined noble metals within zeolites that accelerated the rate-determining step, the formate transformation, in the HCHO elimination.

Research status of volatile organic compound (VOC) removal technology and prospect of new strategies: a review

As an important component of air pollution, the efficient removal of volatile organic compounds (VOCs) is one of the most important challenges in the world. VOCs are harmful to the environment and human health. This review systematically introduced the main VOC control technologies and research hotspots in recent years, and expanded the description of electrocatalytic oxidation technology and bimetallic catalytic removal technology. Based on a three-dimensional electrode reactor, the theoretical design of a VOC removal control technology using bimetallic three-dimensional particle electrode electrocatalytic oxidation was proposed for the first time. The future research focus of this method was analyzed, and the importance of in-depth exploration of the catalytic performance of particle electrodes and the system reaction mechanism was emphasized. This review provides a new idea for using clean and efficient methods to remove VOCs.

N/Ce doped graphene supported Pt nanoparticles for the catalytic oxidation of formaldehyde at room temperature

Pt catalysts with nitrogen-doped graphene oxide (GO) as support and CeO₂ as promoter were prepared by impregnation method, and their catalytic oxidation of formaldehyde (HCHO) at room temperature was tested. The Pt-CeO₂/N-rGO (reduced GO) with a mass fraction of 0.7% Pt and 0.8% CeO₂ exhibited an excellent catalytic performance with the 100% conversion of HCHO at room temperature. Physicochemical characterization demonstrated that nitrogen-doping greatly increased the defect degree and the specific surface area of GO, enhanced the dispersion of Pt and promoted more zero-valent Pt. The synergistic effect between CeO₂ and Pt was also beneficial to the dispersion of Pt. Nitrogen-doping promoted the production of more Ce³⁺ ions, generating more oxygen vacancies, which was conducive to O₂ adsorption. As a result, the catalyst exhibited enhanced redox properties, leading to the best catalytic activity. Finally, an attempt to propose the reaction mechanism of HCHO oxidation has been made.

Metal Nanoclusters Synthesized in Alkaline Ethylene Glycol: Mechanism and Application

The "unprotected" metal and alloy nanoclusters (UMCs) prepared by the alkaline ethylene glycol method, which are stabilized with simple ions and solvent molecules, have the advantages of a small particle size, a narrow size distribution, good stability, highly efficient preparation, easy separation, surface modification and transfer between different phases. They can be composited with diverse materials to prepare catalytic systems with controllable structures, providing an effective means of studying the different factors' effects on the catalytic properties separately. UMCs have been widely used in the development of high-performance catalysts for a variety of functional systems. This paper will review the research progress on the formation mechanism of the unprotected metal nanoclusters, exploring the structure-function relationship of metal nanocluster catalysts and the preparation of excellent metal catalysts using the unprotected metal nanoclusters as building blocks or starting materials. A principle of the influence of carriers, ligands and modifiers in metal nanocluster catalysts on the catalytic properties is proposed.

Synergistic effect of photo-thermal oxidation for a low concentration of HCHO over Bi3+-TiO2/MnFeOx catalysts at ambient temperature

Formaldehyde (HCHO) has been one of the important air pollutants, and the effective removal of HCHO at ambient temperature has been a big challenge. In this work, the synergistic effect of photo-thermal oxidation with Bi³⁺-TiO₂/MnFeO_x for a low concentration of HCHO was investigated. MnFeO_x was synthesized by the complexation method (CM) and co-precipitation (CP), and TiO₂ with Bi³⁺ doping supported on MnFeO_x was prepared by using the hydrothermal method to obtain a higher oxidation performance. The results demonstrated an excellent oxidation activity of MnFeO_x (CM) for HCHO at ambient temperature, attributed to the morphology effect (large surface areas and small crystal sizes), the large absorption of oxygen, and the interaction and oxygen vacancy formed between MnO₂ and FeO_x. Although Bi³⁺-TiO₂/MnFeO_x showed a similar result as MnFeO_x at 48 h, the oxidation activities for HCHO were improved prominently under photo-thermal oxidation at 12 h. The improvement was ascribed to the synergistic effect of Bi³⁺-TiO₂ and MnFeO_x with surface adsorbed oxygen, and more generated reactive oxygen species on the surface. In particular, 2 wt% Bi³⁺-TiO₂/MnFeO_x displayed the highest activity (90.2%) and good stability (5 cycles), and the HCHO average conversion was increased from 46.2 to 58.2% at 12 h. The feasible oxidation mechanism and reaction pathway were also interpreted. This work provides a new insight for the development of photocatalysts supported on transition metal oxides to oxidize HCHO at ambient temperature.

Effect of preparation method of noble metal supported catalyts on formaldehyde oxidation at room temperature: Gas or liquid phase reduction

Formaldehyde (HCHO) is toxic to the human body and is one of the main threats to the indoor air quality (IAQ). As such, the removal of HCHO is imperative to improving the IAQ, whereby the most useful method to effectively remove HCHO at room temperature is catalytic oxidation. This review discusses catalysts for HCHO room-temperature oxidation, which are categorized according to their preparation methods, i.e., gas-phase reduction and liquid-phase reduction methods. The HCHO oxidation performances, structural features, and reaction mechanisms of the different catalysts are discussed, and directions for future research on catalytic oxidation are reviewed.

Enhanced Formaldehyde Oxidation Performance of the Mesoporous TiO2(B)-Supported Pt Catalyst: The Role of Hydroxyls

As one of the crystal phases of titania, TiO2(B) was first utilized as a catalyst carrier for the oxidation of formaldehyde (HCHO). The mesoporous TiO2(B) loaded with Pt nanoparticles enhanced the HCHO oxidation reaction whose reaction rate was 4.5-8.4 times those of other crystalline TiO2-supported Pt catalysts. Simultaneously, Pt/TiO2(B) exhibited long-term stable HCHO oxidation performance. The structural characterization results showed that in comparison with Pt/anatase, Pt/TiO2(B) had more abundant hydroxyls, facilitating increasing the content of oxygen species. Studies on the role of hydroxyls in HCHO oxidation of Pt/TiO2(B) illustrated that synergistic involvement of terminally bound hydroxyls and bridging hydroxyls in HCHO oxidation accelerated the transformation from HCHO to formate via dioxymethylene. Moreover, hydroxyls could avoid the accumulation of excessive formate on Pt/TiO2(B) and promote the rapid oxidation of CO. Accordingly, the hydroxyl groups could accelerate each substep of formaldehyde oxidation, which enabled Pt/TiO2(B) to exhibit excellent formaldehyde oxidation performance.

Support Morphology Effect on Selective Hydrogenation of 3-Nitrostyrene to 3-Vinylaniline over Pt/α-Fe2 O3 Catalysts

Selective hydrogenation of substituted nitroaromatic compounds is an extremely important and challenging reaction. Supported metal catalysts attract much attention in this reaction because the properties of metal nanoparticles (NPs) can be modified by the nature of the support. Herein, the support morphology on the catalytic performance of selective hydrogenation of 3-nitrostyrene to 3-vinylaniline was investigated. Pt NPs supported on octadecahedral α-Fe₂ O₃ supports with a truncated hexagonal bipyramid shape (Pt/α-Fe₂ O₃ -O) and rod-shaped α-Fe₂ O₃ supports (Pt/α-Fe₂ O₃ -R) were prepared by glycol reduction method. Detailed characterizations reveal that the electronic structure and dispersion of Pt NPs can be modified by the supports. The Pt/α-Fe₂ O₃ -O catalyst exhibited superior catalytic performance for hydrogenation of 3-nitrostyrene because of its low coordinated Pt sites and the small Pt NPs size, which is benefit from the high-index exposed surfaces of truncated hexagonal bipyramid-shaped α-Fe₂ O₃ support. The structural evolution during the catalytic reaction was investigated in detail by identical location transmission electron microscopy (IL-TEM) method, which found that the high cycling activity of Pt/α-Fe₂ O₃ -O catalyst during the cycle experiment results from the stability of Pt NPs.

Synthesis of novel highly-dispersed manganese oxide on porous calcium silicate for the catalytic oxidation of toluene

Highly-dispersed MnOx with abundant oxygen vacancy on porous calcium silicate for the catalytic oxidation of toluene.

Recycling Rusty Iron with Natural Zeolite Heulandite to Create a Unique Nanocatalyst for Green Hydrogen Production

Corrosion-induced iron rust causes severe danger, pollution, and economic problems. In this work, nanopowders of Fe2O3 and Fe2O3/zeolite are synthesized for the first time using rusted iron waste and natural zeolite heulandite by chemical precipitation. The chemical composition, nanomorphologies, structural parameters, and optical behaviors are investigated using different techniques. The Fe2O3/zeolite nanocomposite showed smaller sizes and greater light absorption capability in visible light than Fe2O3 nanopowder. The XRD pattern shows crystalline hematite (α-Fe2O3) with a rhombohedral structure. The crystallite sizes for the plane (104) of the Fe2O3 and Fe2O3/zeolite are 64.84 and 56.53 nm, respectively. The Fe2O3 and Fe2O3/zeolite have indirect bandgap values of 1.87 and 1.91 eV and direct bandgap values of 2.04 and 2.07 eV, respectively. Fe2O3 and Fe2O3/zeolite nanophotocatalysts are used for solar photoelectrochemical (PEC) hydrogen production. The Fe2O3/zeolite exhibits a PEC catalytic hydrogen production rate of 154.45 mmol/g.h @ 1 V in 0.9 M KOH solution, which is the highest value yet for Fe2O3-based photocatalysts. The photocurrent density of Fe2O3/zeolite is almost two times that of Fe2O3 catalyst, and the IPCE (incident photon-to-current conversion efficiency) reached ~27.34%@307 nm and 1 V. The electrochemical surface area (ECSA) values for Fe2O3 and Fe2O3/zeolite photocatalysts were 7.414 and 21.236 m2/g, respectively. The rate of hydrogen production for Fe2O3/zeolite was 154.44 mmol h-1/g. This nanophotocatalyst has a very low PEC corrosion rate of 7.6 pm/year; it can retain ~97% of its initial performance. Therefore, the present research can be applied industrially as a cost-effective technique to address two issues at once by producing solar hydrogen fuel and recycling the rusted iron wires.

Recent Advances in the Catalytic Treatment of Volatile Organic Compounds: A Review Based on the Mixture Effect

Catalytic total oxidation is an efficient technique for treating VOCs, which are mainly emitted by solvent-based industrial processes. However, studies of the catalytic oxidation of VOCs in combination with other pollutants are very limited, despite the fact that this is a key step of knowledge before industrial application. During the oxidation reaction, the behavior of a molecule may change depending on the reaction mixture. For the treatment of an effluent loaded with VOCs, it is necessary to carefully select not only the catalytic material to be used but also the reaction conditions. Indeed, the catalytic oxidation of a component in a VOCs mixture is not predicted solely from the behavior of individual component. Thus, the objective of this small review is to carry out a study on the effect observed in the case of the oxidation of a VOCs mixture or in the presence of water, NOX or sulfur compounds.

In Search of Factors Determining Activity of Co3O4 Nanoparticles Dispersed in Partially Exfoliated Montmorillonite Structure

The paper discusses a formation of Mt–PAA composite containing a natural montmorillonite structure partially exfoliated by poly(acrylic acid) introduced through intercalation polymerization of acrylic acid. Mt–PAA was subsequently modified by controlled adsorption of Co²⁺ ions. The presence of aluminosilicate packets (clay) and carboxyl groups (hydrogel) led to the deposition of significant amounts of Co²⁺ ions, which after calcination formed the Co₃O₄ spinel particles. The conditions of the Co²⁺ ions’ deposition (pH, volume and concentration of Co(NO₃)₂ solution, as well as a type of pH-controlling agent) were widely varied. Physicochemical characterization of the prepared materials (including X-ray fluorescence (XRF), X-ray powder diffraction (XRD), low-temperature nitrogen adsorption, X-ray photoelectron spectroscopy (XPS) and temperature-programmed reduction (H₂-TPR)) revealed that the modification conditions strongly influenced the content as well as the distribution of the Co₃O₄ active phase, tuning its reducibility. The latter parameter was, in turn, very important from the point of view of catalytic activity in the combustion of aromatic volatile organic compounds (VOCs) following the Mars–van Krevelen mechanism.

Performance of platinum doping on spent alkaline battery-based catalyst for complete oxidation of o-xylene

Oxidation of o-xylene was performed using alkaline battery-based catalyst doped with platinum to investigate the properties and activities. O-xylene was selected as the model of volatile organic compound (VOC) in this work. Physicochemical properties of the selected catalysts were characterized by FE/TEM (field emission transmission electron microscopy), BET (Brunauer-Emmett-Teller) analysis, XRD (X-ray powder diffraction), SEM/EDX (scanning electron microscopy/energy dispersive X-ray spectroscopy), and H₂-TPR (hydrogen temperature programmed reduction). Major elements of the spent alkaline battery-based catalyst treated with sulfuric acid solution [SAB (400) catalyst] were manganese, zinc, iron, oxygen, carbon, chlorine, aluminum, sodium, silicon, and potassium. Increasing the doping amount of platinum on SAB (400) catalyst from 0.1 to 1 wt% increased particle size of platinum and lowered the temperature of TPR (TTP) for SAB (400) catalyst. Better redox properties were achieved with an increase in the o-xylene conversion according to the doping amount of platinum. When GHSV (gas hourly space velocity) was 40,000 h^-1, o-xylene was oxidized completely over SAB (400) catalyst and 1.0 wt% Pt/SAB(400) catalyst at temperatures of 400 °C and 280 °C, respectively.

Hierarchical nanostructures self-assembled from δ-MnO2 ultrathin nanosheets and Mn3O4 octahedrons for efficient room-temperature HCHO oxidation

Self-assembling ultrathin active δ-MnO₂ nanosheets and Mn₃O₄ octahedrons into hierarchical texture enhances room-temperature formaldehyde oxidation at a low-level of Pt.

Abatement of formaldehyde with photocatalytic and catalytic oxidation: a review

Formaldehyde is one of the vital chemicals produced by industries, transports, and domestic products. Formaldehyde emissions adversely affect human health and it is well known for causing irritation and nasal tumors. The major aim of the modern indoor formaldehyde control study is in view of energy capacity, product selectivity, security, and durability for efficient removal of formaldehyde. The two important methods to control this harmful chemical in the indoor environments are photocatalytic oxidation and catalytic oxidation with noble metals and transition metal oxides. By harmonizing different traditional photocatalytic and catalytic oxidation technologies that have been evolved already, here we give a review of previously developed efforts to degrade indoor formaldehyde. The major concern in this article is based on getting the degradation of formaldehyde at ambient temperature. In this article, different aspects of these two methods with their merits and demerits are discussed. The possible effects of operating parameters like preparation methods, support, the effect of light intensity in photocatalytic oxidation, relative humidity, etc. have been discussed comprehensively.

Influence of Titania Synthesized by Pulsed Laser Ablation on the State of Platinum during Ammonia Oxidation

A set of physicochemical methods, including X-ray photoelectron spectroscopy (XPS), X-ray diraction, electron microscopy and X-ray absorption spectroscopy, was applied to study Pt/TiO2 catalysts prepared by impregnation using a commercial TiO2-P25 support and a support produced by pulsed laser ablation in liquid (PLA). The Pt/TiO2-PLA catalysts showed increased thermal stability due to the localization of the highly dispersed platinum species at the intercrystalline boundaries of the support particles. In contrast, the Pt/TiO2-P25 catalysts were characterized by uniform distributionof the Pt species over the support. Analysis of Pt4f XP spectra shows that oxidized Pt2+ and Pt4+ species are formed in the Pt/TiO2-P25 catalysts, while the platinum oxidation state in the Pt/TiO2-PLA catalysts is lower due to stronger interaction of the active component with the support due to stronginteraction via Pt-O-Ti bonds. The Pt4f XP spectra of the samples after reaction show Pt2+ and metallic platinum, which is the catalytically active species. The study of the catalytic properties in ammonia oxidation showed that, unlike the catalysts prepared with a commercial support, the Pt/TiO2-PLA samples show higher stability during catalysis and significantly higher selectivity to N2 in a wide temperature range of 200–400 C.

Complete Degradation of Gaseous Methanol over Pt/FeOx Catalysts by Normal Temperature Catalytic Ozonation

Normal temperature catalytic ozonation (NTCO) is a promising yet challenging method for the removal of volatile organic compounds (VOCs) because of limited activity of the catalysts at ambient temperature. Here, we report a series of Pt/FeO_x catalysts prepared by the co-precipitation method for NTCO of gaseous methanol. All samples were found to be active and among them, the Pt/FeO_x-400 (calcined at 400 °C) catalyst with a Pt cluster loading of 0.2% exhibited the highest activity, able to completely convert methanol into CO₂ and H₂O at 30 °C. Extensive experimental research suggested that the superior catalytic activity could be attributed to the highly dispersed Pt clusters and an appropriate molar ratio of Pt⁰/Pt²⁺. Furthermore, electron paramagnetic resonance and density functional theory computational studies revealed the mechanism that the Pt/FeO_x-400 catalyst could activate O₃ and water effectively to produce hydroxyl radicals responsible for the catalytic oxidation of methanol. The findings of this work may foster the development of technologies for normal temperature abatement of VOCs with low energy consumption.

Platinum-Supported Zirconia Nanotube Arrays Supported on Graphene Aerogels Modified with Metal-Organic Frameworks: Adsorption and Oxidation of Formaldehyde at Room Temperature

Precious-metal catalysts (e.g., Au, Rh, Ag, Ru, Pt, and Pd) supported on transition-metal oxides (e.g., Al₂ O₃ , Fe₂ O₃ , CeO₂ , ZrO₂ , Co₃ O₄ , MnO₂ , TiO₂ , and NiO) can effectively oxidize volatile organic compounds. In this study, porous platinum-supported zirconia materials have been prepared by a "surface-casting" method. The synthesized catalysts present an ordered nanotube structure and exhibited excellent performance toward the catalytic oxidation of formaldehyde. A facile method, utilizing a boiling water bath, was used to fabricate graphene aerogel (GA), and the macroscopic 3D Pt/ZrO₂ -GA was modified by introducing an adjustable MOF coating by a surface step-by-step method. The unblocked mesoporous structure of the graphene aerogel facilitates the ingress and egress of reactants and product molecules. The selected 7 wt.% Pt/ZrO₂ -GA-MOF-5 composite demonstrated excellent performance for HCHO adsorption. Additionally, this catalyst achieved around 90 % conversion when subjected to a reaction temperature of 70 °C (T_90 % =70 °C). The Pt/ZrO₂ -GA-MOF-5 composite induces a catalytic cycle, increasing the conversion by simultaneously adsorbing and oxidizing HCHO. This work provides a simple approach to increasing reactant concentration on the catalyst to increase the rate of reaction.

Mild Preoxidation Treatment of Pt/TiO2 Catalyst and Its Enhanced Low Temperature Formaldehyde Decomposition

The typical platinum nanoparticles loaded on titania (Pt/TiO2) were pretreated with mild oxidation (<300 °C) in pure oxygen to enhance the low-temperature formaldehyde (HCHO) decomposition performance. The structural properties of support and platinum nanoparticles were characterized by X-ray diffraction (XRD), physical adsorption/desorption, high-resolution transmission electron microscopy (HRTEM), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFITS), and temperature-programmed reduction and oxidation (TPR and TPO). The catalytic results showed that the low temperature HCHO decomposition activity of mild pre-oxidized Pt/TiO2 was around three times that of the pristine one. According to the characterization results, the structure of the Pt/TiO2 support and their Pt particle sizes had negligible change after pre-oxidation treatment. The cationic Pt content of Pt/TiO2 and surface roughness of Pt nanoparticles gradually increased with the increasing temperature of the pre-oxidation treatment. Mild pre-oxidation treatment was beneficial to the oxygen activation and water dissociation of Pt/TiO2. In situ HCHO-DFIRTS results showed that the mild pre-oxidation treatment could enhance the dehydrogenation of formate.

Active Site-Directed Tandem Catalysis on Single Platinum Nanoparticles for Efficient and Stable Oxidation of Formaldehyde at Room Temperature

The application of tandem catalysis is rarely investigated in degrading organic pollutants in the environment. Herein, a tandem catalyst on single platinum (Pt) nanoparticles (Pt⁰ NPs) is prepared for the sequential degradation of formaldehyde (HCHO) to carbon dioxide gas [CO₂(g)] at room temperature. The synthesis approach includes coating of uniform Pt NPs on SrBi₂Ta₂O₉ platelets using a photoreduction process, followed by calcination of the sample in the atmosphere to tune partial transformation of Pt⁰ atoms to Pt²⁺ ions in the tandem catalyst. The conversion of HCHO to CO₂(g) is monitored by in situ Fourier transform infrared spectroscopy, which shows first conversion of HCHO to CO₃^2- ions onto Pt⁰ active sites and subsequently the conversion of CO₃^2- ions to CO₂(g) by neighboring Pt²⁺ species of the catalyst. The later process with Pt²⁺ species does not allow CO₃^2- poisoning of the catalyst. The enhanced activity of the prepared tandem catalyst to oxidize HCHO is maintained continuously for 680 min. Comparatively, the catalyst without Pt²⁺ shows activity for only 40 min. Additionally, the tandem catalyst presented herein performs better than the Pt/titanium dioxide (TiO₂) catalyst to degrade HCHO. Overall, the tandem catalyst may be applied to degrade organic pollutants efficiently.

N-doping nanoporous carbon microspheres derived from MOFs for highly efficient removal of formaldehyde

Indoor formaldehyde (HCHO) removal is very important to reduce public health risk. Herein, we report a facile method for preparing N-doped nanoporous carbon through direct carbonization of metal-organic frameworks (ZIF-8) to remove harmful formaldehyde. The prepared N-doped nanoporous carbon exhibited uniform morphology and large specific surface area. Moreover, the type of N-functional groups on the N-doped nanoporous carbon had a dominant effect on its HCHO adsorption activity. As a result, HCHO adsorption capacity of the optimized N-doped nanoporous carbon was approximately five times higher than that of the commercially activated carbon. The detailed HCHO adsorption process, including physical adsorption and chemical adsorption, was also confirmed through in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). In addition, it should be noted that the N-doped nanoporous carbon exhibited high stability for HCHO adsorption, even after six adsorption cycles, indicating its good recyclability for long-term application. This study is expected to pave a way for expanding the environmental applications of the N-doped nanoporous carbon.

Pt supported on long-rod β-FeOOH as an efficient catalyst for HCHO oxidation at ambient temperature

A novel Pt/FeOOH catalyst containing highly active interface between Pt and β-FeOOH (010) plane have been developed for HCHO oxidation at ambient temperature.

Applying low-temperature titration for determination of metallic sites on active oxide supported catalysts

A customized apparatus with online MS is used for chemisorption measurements, providing high sensitivity, demonstrated on Pt and Cu catalysts.

Ultralow Pt Catalyst for Formaldehyde Removal: The Determinant Role of Support

Supported Pt catalyst has been intensively investigated for formaldehyde elimination owing to its superior reactivity at room temperature (RT). However, the high Pt content is challenging because of its high cost. Herein, we report PbO-supported Pt catalysts with only 0.1 wt % Pt, which can achieve complete conversion of formaldehyde and reliable stability at RT under demanding conditions. Both experiments and simulations demonstrate that PbO interacts strongly with the Pt species, resulting in tight Pb-O-Pt bonding at the metal/support interface and concomitant activation of the surface lattice oxygen of the support. Moreover, PbO exhibits an extremely high capacity of formaldehyde capture through methylene glycol chemisorption rather than the common hydroxyl-associated adsorption, presenting a different reaction mechanism because the active surface lattice oxygen in the vicinity of Pt species offers improved reactivity. This work provides a valuable example for the design of an efficient catalyst for formaldehyde and potentially oxidation of other carbohydrates.

•

Pt% in catalyst for room temperature formaldehyde removal was reduced to 0.1 wt %

•

100% formaldehyde removal and reliable stability was achieved at room temperature

•

PbO interacts strongly with the Pt species to form tight Pb-O-Pt bonding

•

The active surface lattice oxygen close to Pt species offers improved reactivity

Toward effective design and adoption of catalyst-based filter for indoor hazards: Formaldehyde abatement under realistic conditions

Catalytic oxidation at ambient temperature has drawn wide attention as a new promising method of air cleaning, converting hazardous materials into non-hazardous ones. However, limited information is available regarding catalytic filter performance/characteristics under real operating conditions, especially on service efficiency and byproducts. Also, no practical scale-up method/evidence for filter performance evaluation is currently available to scale-up laboratory results to real application conditions. These limitations and knowledge gaps prevent building owners/designers from adopting this new promising technique in their commercial/industrial applications. The present study conducted experiments from small-scale to full-scale chamber tests which challenged a developed catalytic filter under realistic conditions. Formaldehyde was selected for approach demonstration due to its indoor ubiquitousness and criticality for human health even at low-levels. Results showed that the competition level for reaction sites in filter media had a crucial role in the performance for formaldehyde abatement, a high initial (77%; under no competing pollutants) to a typical stable level (23-32%), depending on the coexistence of other pollutants and moisture in the air, that the employment of this type of filter might generate byproducts (opposite to previous literature reports), and that small-scale column tests represented a good indication for large-scale filter performance as a practical screening method.

Pt-Au/MOx-CeO₂ (M = Mn, Fe, Ti) Catalysts for the Co-Oxidation of CO and H₂ at Room Temperature

A series of nanostructured Pt-Au/MO_x-CeO₂ (M = Mn, Fe, Ti) catalysts were prepared and their catalytic performance for the co-oxidation of carbon monoxide (CO) and hydrogen (H₂) were evaluated at room temperature. The results showed that MO_x promoted the CO oxidation of Pt-Au/CeO₂, but only the TiO₂ could enhance co-oxidation of CO and H₂ over Pt-Au/CeO₂. Related characterizations were conducted to clarify the promoting effect of MO_x. Temperature-programmed reduction of hydrogen (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) results suggested that MO_x could improve the charge transfer from Au sites to CeO₂, resulting in a high concentration of Ce³⁺ and cationic Au species which benefits for the CO oxidation. In-situ diffuse reflectance infrared Fourier transform spectroscopy (In-situ DRIFTS) results indicated that TiO₂ could facilitate the oxidation of H₂ over the Pt-Au/TiO₂-CeO₂ catalyst.

Catalytic decomposition and mechanism of formaldehyde over Pt–Al2O3 molecular sieves at room temperature

Al₂O₃ molecular sieve supported Pt was prepared for catalytic formaldehyde oxidation at room temperature.