Preparation of fluorescent nanofibrous film as a sensing material and adsorbent for Cu2+ in aqueous solution via copolymerization and electrospinning

A naphthalimide-tyrosine-based dicationic amphiphile for intracellular 'turn-on' simultaneous detection of ATP and CTP

We have developed a new naphthalimide-based amphiphile (YN-1) for the simultaneous detection of ATP and CTP. In YN-1, the cationic tyrosine-linked polyamine (+2 charge, hydrophilic unit) is appended at the -peri position of naphthalimide (hydrophobic unit). YN-1 and its Boc-protected compound 4 were characterized using state-of-the-art spectroscopic and optical techniques such as NMR, IR, UV-vis and fluorescence. The fluorescence data revealed that YN-1 showed a 'turn-on' (λ_em = 440 nm) fluorescence response for nanomolar detection of nucleoside triphosphates such as ATP and CTP in 20% HEPES buffer-DMSO solution. YN-1 also showed a concentration-based discrimination between ATP and CTP. YN-1 has been successfully applied for bioimaging of nucleoside triphosphates in MCF-7 live cancer cells with good compatibility. Therefore, the important findings from the present work will provide insight for future development of fluorescent probes to detect various kinds of essential nucleoside triphosphates.

Electrospun Nanofiber Membranes from 1,8-Naphthimide-Based Polymer/Poly(vinyl alcohol) for pH Fluorescence Sensing

Accurately and sensitively sensing and monitoring the pH in the environment is a key fundamental issue for human health. Nanomaterial and nanotechnology combined with fluorescent materials can be emerged as excellent possible methods to develop high-performance sensing membranes and help monitor pH. Herein, a series of fluorescent nanofiber membranes (NFMs) containing poly-1,8-naphthimide derivative-3-[dimethyl-[2-(2-methylprop-2-enoyloxy)ethyl]azaniumyl]propane-1-sulfonate (PNI-SBMA) are fabricated by electrospinning the solution of PNI-SBMA blended with poly(vinyl alcohol) (PVA). The surfactant-like functionalities in side chains of PNI-SBMA endow the NFMs with outstanding hydrophilicity, and the naphthimide derivatives are sensitive to pH by photoinduced electron transfer effect, which contribute to highly efficient pH fluorescence sensing applications of NFMs. Specifically, the PNI-SBMA/PVA NFM with a ratio of 1:9 (NFM2) shows high sensitivity and good cyclability to pH. This work demonstrates an effective strategy to realize a fluorescent sensor NFM that has a fast and sensitive response to pH, which will benefit its application of pH sensor monitoring in the water treatment process.

Fluorescent sensing film decorated with ratiometric probe for visual and recyclable monitoring of Cu2

Specifically, visually, and quantitatively monitor copper ion (Cu²⁺) is critical in the area of biological and environmental detection. Herein, a ratiometric fluorescent probe with benzoxazole appended xanthenes skeleton was constructed and further employed to monitor Cu²⁺ in Hela cells, real water samples, and test strips. An easily distinguishable colorimetric (colorless to red) and fluorescence (green to red) change could be observed by naked eye under the portable UV lamp (365 nm) and the changes could be recovered by adding S^2-. Furthermore, electrospinning technique was employed to fabricate a probe composited fluorescent sensing film (PMMA) for realizing the visual and recyclable monitoring of Cu²⁺, indicating that the probe-composited fluorescent sensing film has great potential for on-site and naked-eye detection of Cu²⁺ in practical.

Functionalized Electrospun Nanofibers as a Versatile Platform for Colorimetric Detection of Heavy Metal Ions in Water: A Review

The increasing heavy metal pollution in the aquatic ecosystem mainly driven by industrial activities has raised severe concerns over human and environmental health that apparently necessitate the design and development of ideal strategies for the effective monitoring of heavy metals. In this regard, colorimetric detection provides excellent opportunities for the easy monitoring of heavy metal ions, and especially, corresponding solid-state sensors enable potential opportunities for their applicability in real-world monitoring. As a result of the significant interest originating from their simplicity, exceptional characteristics, and applicability, the electrospun nanofiber-based colorimetric detection of heavy metal ions has undergone radical developments in the recent decade. This review illustrates the range of various approaches and functional molecules employed in the fabrication of electrospun nanofibers intended for the colorimetric detection of various metal ions in water. We highlight relevant investigations on the fabrication of functionalized electrospun nanofibers encompassing different approaches and functional molecules along with their sensing performance. Furthermore, we discuss upcoming prospectus and future opportunities in the exploration of designing electrospun nanofiber-based colorimetric sensors for real-world applications.

Multifunctional Gas and pH Fluorescent Sensors Based on Cellulose Acetate Electrospun Fibers Decorated with Rhodamine B-Functionalised Core-Shell Ferrous Nanoparticles

Ferrous core-shell nanoparticles consisting of a magnetic γ-Fe₂O₃ multi-nanoparticle core and an outer silica shell have been synthesized and covalently functionalized with Rhodamine B (RhB) fluorescent molecules (γ-Fe₂O₃/SiO₂/RhB NPs). The resulting γ-Fe₂O₃/SiO₂/RhB NPs were integrated with a renewable and naturally-abundant cellulose derivative (i.e. cellulose acetate, CA) that was processed in the form of electrospun fibers to yield multifunctional fluorescent fibrous nanocomposites. The encapsulation of the nanoparticles within the fibers and the covalent anchoring of the RhB fluorophore onto the nanoparticle surfaces prevented the fluorophore's leakage from the fibrous mat, enabling thus stable fluorescence-based operation of the developed materials. These materials were further evaluated as dual fluorescent sensors (i.e. ammonia gas and pH sensors), demonstrating consistent response for very high ammonia concentrations (up to 12000 ppm) and fast and linear response in both alkaline and acidic environments. The superparamagnetic nature of embedded nanoparticles provides means of electrospun fibers morphology control by magnetic field-assisted processes and additional means of electromagnetic-based manipulation making possible their use in a wide range of sensing applications.

Facile 3D Boron Nitride Integrated Electrospun Nanofibrous Membranes for Purging Organic Pollutants

Elegant integration of three-dimensional (3D) boron nitride (BN) into the porous structure of a polymer nanofiber (NF) membrane system results in a surface with enhanced absorption capacity for removal. Various BN-based applications were designed and developed successfully, but BN-based absorption systems remain relatively unexplored. To develop a reusable absorption strategy with high removal efficiency, we used a composite of 3D BN and polyacrylonitrile (PAN) to prepare a NF membrane with a porous structure by using electrospinning and spray techniques (BN-PAN ES NFs). The removal efficiency of the 3D BN NF membrane was higher than that of a pure carbon NF membrane. Water pollutants, such as the dyes Congo red (CR), basic yellow 1 (BY), and rhodamine B (Rh B), were tested, and the absorption ratios were 46%, 53%, and 45%, respectively. Furthermore, the aforementioned dyes and pollutants can be completely eliminated and removed from water by heating because of the high heat resistance of 3D BN. The membrane can be recycled and reused at least 10 times. These results indicate that BN-PAN ES NFs have can be used in water purification and treatment for absorption applications, and that they can be reused after heat treatment.

RGB-Switchable Porous Electrospun Nanofiber Chemoprobe-Filter Prepared from Multifunctional Copolymers for Versatile Sensing of pH and Heavy Metals

Novel red-green-blue (RGB) switchable probes based on fluorescent porous electrospun (ES) nanofibers exhibiting high sensitivity to pH and mercury ions (Hg²⁺) were prepared with one type of copolymer (poly(methyl methacrylatete-co-1,8-naphthalimide derivatives-co-rhodamine derivative); poly(MMA-co-BNPTU-co-RhBAM)) by using a single-capillary spinneret. The MMA, BNPTU, and RhBAM moieties were designed to (i) permit formation of porous fibers, (ii) fluoresce for Hg²⁺ detection, and (iii) fluoresce for pH, respectively. The fluorescence emission of BNPTU (fluorescence resonance energy transfer (FRET) donor) changed from green to blue as it detected Hg²⁺. The fluorescence emission of RhBAM (FRET acceptor) was highly selective for pH, changing from nonfluorescent (pH 7) to exhibiting strong red fluorescence (pH 2). The full-color emission of the ES nanofibers included green, red, blue, purple, and white depending on the particular pH and Hg²⁺-concentration combination of the solution. The porous ES nanofibers with 30 nm pores were fabricated using hydrophobic MMA, low-boiling-point solvent, and at a high relative humidity (80%). These porous ES nanofibers had a higher surface-to-volume ratio than did the corresponding thin films, which enhanced their performance. The present study demonstrated that the FRET-based full-color-fluorescence porous nanofibrous membranes, which exhibit on-off switching and can be used as naked eye probes, have potential for application in water purification sensing filters.

Novel Magnet and Thermoresponsive Chemosensory Electrospinning Fluorescent Nanofibers and Their Sensing Capability for Metal Ions

Novel multifunctional switchable chemosensors based on fluorescent electrospun (ES) nanofibers with sensitivity toward magnetism, temperature, and mercury ions (Hg²⁺) were prepared using blends of poly(N-isopropylacrylamide)-co-(N-methylolacrylamide)-co-(Acrylic acid), the fluorescent probe 1-benzoyl-3-[2-(2-allyl-1,3-dioxo-2,3-dihydro-1Hbenzo[de]isoquinolin-6-ylamino)-ethyl]-thiourea (BNPTU), and magnetite nanoparticles (NPs), and a single-capillary spinneret. The moieties of N-isopropylacrylamide, N-methylolacrylamide, acrylic acid, BNPTU, and Iron oxide (Fe₃O₄) NPs were designed to provide thermoresponsiveness, chemical cross-linking, Fe₃O₄ NPs dispersion, Hg²⁺ sensing, and magnetism, respectively. The prepared nanofibers exhibited ultrasensitivity to Hg²⁺ (as low as 10⁻³ M) because of an 80-nm blueshift of the emission maximum (from green to blue) and 1.6-fold enhancement of the emission intensity, as well as substantial volume (or hydrophilic to hydrophobic) changes between 30 and 60 °C, attributed to the low critical solution temperature of the thermoresponsive N-isopropylacrylamide moiety. Such temperature-dependent variations in the presence of Hg²⁺ engendered distinct on–off switching of photoluminescence. The magnetic ES nanofibers can be collected using a magnet rather than being extracted through alternative methods. The results indicate that the prepared multifunctional fluorescent ES nanofibrous membranes can be used as naked eye sensors and have the potential for application in multifunctional environmental sensing devices for detecting metal ions, temperature, and magnetism as well as for water purification sensing filters.

Recent Advances of Electrospun Nanofibrous Membranes in the Development of Chemosensors for Heavy Metal Detection

It is critical to detect and analyze the heavy metal pollutions in environments and foods. Chemosensors have been widely investigated for fast detection of analytes such as heavy metals due to their unique advantages. In order to improve the detection sensitivity of chemosensors, recently electrospun nanofibrous membranes (ENMs) have been explored for the immobilization of chemosensors or receptors due to their high surface-to-volume ratio, high porosity, easiness of fabrication and functionalization, controllability of nanofiber properties, low cost, easy detection, no obvious pollution to the detection solution, and easy post-treatment after the detection process. The purpose of this review is to summarize and guide the development and application of ENMs in the field of chemosensors for the detection of analytes, especially heavy metals. First, heavy metals, chemosensors, and four types of preparation methods for ENM-immobilized chemosensors/receptors are briefly introduced. And then, ENM-immobilized chemosensors/receptors and their application progresses for optical, electro, and mass detections of heavy metals are reviewed according to the four types of preparation methods. Finally, the application of ENM-immobilized chemosensors/receptors is summarized and an outlook is provided. The review will provide an instruction to the research and development of ENM-immobilized chemosensors/receptors for the detection of analytes.

An azo-phenol derivative probe: colorimetric and “turn-on” fluorescent detection of copper(ii) ions and pH value in aqueous solution

The optical properties of a novel, rhodamine-based derivative, synthesized by reacting rhodaminehydrazide and an azo-phenol derivative in ethanol, were investigated in ethanol–water solution.

Thiosemicarbazide chemical functionalized carbon dots as a fluorescent nanosensor for sensing Cu2+and intracellular imaging

Synthesis procedures for the CDs-based nanosensor and schematic diagram of Cu²⁺detection.

Immobilization of gold nanoclusters inside porous electrospun fibers for selective detection of Cu(II): A strategic approach to shielding pristine performance

Here, a distinct demonstration of highly sensitive and selective detection of copper (Cu²⁺) in a vastly porous cellulose acetate fibers (pCAF) has been carried out using dithiothreitol capped gold nanocluster (DTT.AuNC) as fluorescent probe. A careful optimization of all potential factors affecting the performance of the probe for effective detection of Cu²⁺ were studied and the resultant sensor strip exhibiting unique features including high stability, retained parent fluorescence nature and reproducibility. The visual colorimetric detection of Cu²⁺ in water, presenting the selective sensing performance towards Cu²⁺ ions over Zn²⁺, Cd²⁺ and Hg²⁺ under UV light in naked eye, contrast to other metal ions that didn’t significantly produce such a change. The comparative sensing performance of DTT.AuNC@pCAF, keeping the nonporous CA fiber (DTT.AuNC@nCAF) as a support matrix has been demonstrated. The resulting weak response of DTT.AuNC@nCAF denotes the lack of ligand protection leading to the poor coordination ability with Cu²⁺. The determined detection limit (50 ppb) is far lower than the maximum level of Cu²⁺ in drinking water (1.3 ppm) set by U.S. Environmental Protection Agency (EPA). An interesting find from this study has been the specific oxidation nature between Cu²⁺ and DTT.AuNC, offering solid evidence for selective sensors.

Novel highly selective and reversible chemosensors based on dual-ratiometric fluorescent electrospun nanofibers with pH- and Fe(3+)-modulated multicolor fluorescence emission

Novel dual-ratiometric fluorescent electrospun (ES) nanofibers featuring high sensitivity for pH and ferric ion (Fe(3+)) were prepared using binary blends of poly(2-hydroxyethyl methacrylate-co-N-methylolacrylamide-co-nitrobenzoxadiazolyl derivative) (poly(HEMA-co-NMA-co-NBD)) and a spirolactam rhodamine derivative (SRhBOH) by employing a single-capillary spinneret. The HEMA, NMA, and NBD moieties were designed to exhibit hydrophilic properties, chemical cross-linking, and fluorescence (fluorescence resonance energy transfer (FRET) donor), respectively. The fluorescence emission of SRhBOH was highly selective for pH and Fe(3+); when SRhBOH detected acidic media and Fe(3+), the spirocyclic form of SRhBOH, which is nonfluorescent, was transformed into the opened cyclic form and exhibited strong fluorescence emission. The emission colors of ES nanofibers in acidic or Fe(3+) aqueous solutions changed from green to red because of FRET from NBD (donor) to SRhBOH (acceptor). The off/on switching of the FRET process was modulated by adjusting the SRhBOH blending ratio, pH, and Fe(3+) concentration. Poly(HEMA-co-NMA-co-NBD) ES fibers blended with 20% SRhBOH showed high sensitivity in sensing Fe(3+) and pH because of the substantial 57 nm red shift in emission as well as substantial reversible dual photoluminescence. The prepared FRET-based dual-ratiometric fluorescent ES nanofibrous membranes can be used as "naked eye" sensors and have potential for application in multifunctional environment sensing devices.

An ultra sensitive fluorescent nanosensor for detection of ionic copper

A stable and ultra sensitive nano-scale fluorescent chemo-sensor for trace amounts of Cu(2+) was proposed. The Cu(2+) selective fluoroionophore 2-{[(2-aminophenyl)imino]methyl}-4,6-di-tert-butylphenol (DMK-7) was encapsulated in polymeric ethyl cellulose. The sensing membranes were fabricated in form of nanofibers and thin films. When embedded in polymers, the exploited DMK-7 dye exhibited enhanced photophysical characteristics in absorbance, Stoke's shift, fluorescence quantum yield, and short and long-term photostability with respect to the solution phase. Sensing abilities of the nanofibers and thin films were tested by steady state and time resolved fluorescence spectroscopy. To our knowledge, this is the first attempt using the DMK-7-doped electrospun nanofibrous materials for copper sensing. The offered sensor displayed a sensitive response with a detection limit of 3.3×10(-13) M for Cu(2+) ions over a wide concentration range of 5.0×10(-12)-5.0×10(-5). Additionally, exhibited high selectivity over convenient cations; Na(+), K(+), Ca(2+), Mg(2+), NH4(+) and Ag(+), Al(3+), Ba(2+), Co(2+), Cr(3+), Fe(3+), Fe(2+), Hg(2+), Li(+), Mn(2+), Ni(2+), Pb(2+), Sn(2+) and Zn(2+).

Naked-eye-based selective detection of pyrophosphate with a Zn2+ complex in aqueous solution and electrospun nanofibers

Based on keto–enol transformation process, a zinc complex as a naked-eye-based chemosensor for pyrophosphate in aqueous solution and electrospun nanofibers has been developed.

Electrospun polyethylene terephthalate (PET) nanofibers as a new adsorbent for micro-solid phase extraction of chromium(vi) in environmental water samples

An SPME method based on electrospun PET nanofibers coupled with UV-Vis spectrophotometry for the detection of Cr(vi) in water.

Simple quinoline-based “turn-on” fluorescent sensor for imaging copper (II) in living cells

In this work, a novel fluorescent sensor based on a quinoline derivative was designed and synthesized for detecting copper ions in a near-aqueous media. According to its extra-nuclear structure, copper (II) normally exhibits effectiveness for quenching the singlet excited state of organic chromophores through a fast electron transfer mechanism. However, this molecule displayed a strong fluorescence “turn-on” phenomenon upon addition of Cu2+, which was rarely reported in previous research. In addition, density functional theory calculations were adopted to investigate the molecular orbitals as well as the spatial structure. Furthermore, this sensor was applied into living SGC-7901 cells to extend its application in biological systems.

Cu²⁺ sequestration by amine-functionalized silica nanotubes

A novel method for Cu(2+) sequestration in Cu(2+) aqueous solution has been demonstrated using amine-functionalized double-walled silica nanotubes (DWSNTs). Herein, the precipitation method and the adsorption method are combined to remove Cu(2+) in the Cu(2+) aqueous solution. Primary (1°), secondary (2°), tertiary (3°), di-, tri-amines are immobilized on the surface of DWSNT as the adsorption site. The results show that the Cu(2+) adsorption amount on the amine-functionalized DWSNTs is in the following order: tri-amine>di-amine>1° amine>2° amine>3° amine. The complexed Cu(2+)s with the amine-functionalized DWSNTs become Cu(OH)2 crystals due to the reaction with OH(-)s dissociated from water. Thus, the amine-functionalized DWSNTs show the superior sequestration capacity of Cu(2+) in the Cu(2+) aqueous solution owing to the Cu(OH)2 crystals growth on them. FT-IR, FEG-SEM, HR-TEM, and XRD studies demonstrate the mechanism of the Cu(2+) adsorption and the Cu(OH)2 crystals growth. The crystallization-technique of the heavy metal ion on the amine-functionalized DWSNTs is also expected to have potential applications such as the facile synthesis of nano- and microparticles, and the metal catalyst supporter.

Polyacrylonitrile/manganese acetate composite nanofibers and their catalysis performance on chromium (VI) reduction by oxalic acid

Polyacrylonitrile(PAN)/manganese acetate(Mn(CH(3)COO)(2)) composite nanofibers have been fabricated by electrospinning, a simple and effective technology. The obtained composite nanofibers were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectrometer (FT-IR). The composite nanofibers are amorphous in structure, continuous, even and smooth. At the same time, the reduction performance of Cr(VI) by oxalic acid in the presence of the composite nanofibers is also investigated. The results indicate that the composite nanofibers have exhibited excellent catalysis performance for Cr(VI) reduction from a Cr(2)O(7)(2-)-containing solution by oxalic acid. And the critical parameters, such as the catalyst dosage, oxalic acid content, chromium concentration, the pH value of the reaction solution and light have important impact on the reduction process. Under the simulated solar light irradiation, after only 60 min, 1.2mM initial Cr(VI) solution was reduced absolutely in the presence of PAN/Mn(CH(3)COO)(2) composite nanofibers containing 17.5 wt.% Mn(CH(3)COO)(2) by 0.3 mL 0.5M oxalic acid. In light, the reduction of Cr(VI) by oxalic acid is markedly accelerated.