Analysis of hazardous organic residues from sodium hydrosulfite industry and utilization as raw materials in a novel solid lubricant production

Advanced treatment of sodium dithionite wastewater using the combination of coagulation, catalytic ozonation, and SBR

A combined process of coagulation-catalytic ozonation-anaerobic sequencing batch reactor (ASBR)-SBR was developed at lab scale for treating a real sodium dithionite wastewater with an initial chemical oxygen demand (COD) of 21,760-22,450 mg/L. Catalytic ozonation with the prepared cerium oxide (CeO₂)/granular activated carbon catalyst significantly enhances wastewater biodegradability and reduces wastewater microtoxicity. The results show that, under the optimum conditions, the removal efficiencies of COD and suspended solids are averagely 99.3% and 95.6%, respectively, and the quality of final effluent can meet the national discharge standard of China. The coagulation and ASBR processes remove a considerable proportion of organic matter, while the SBR plays an important role in post-polish of final effluent. The ecotoxicity of the wastewater is greatly reduced after undergoing the hybrid treatment. This work demonstrates that the hybrid system has the potential to be applied for the advanced treatment of high-strength industrial wastewater.

Gypsum blocks produced from TiO2 production by-products

Calcined titanium gypsum was investigated by the ways of XRD (powder X-ray diffraction), XRF (X-ray fluorescence) and TG-DTA (thermogravimetric-differential thermal analyses). It was employed as raw material for making lightweight materials. The influence of cement, amount of water/solid (W/S) ratio, water-reducing agent, citric acid content and the hydration age on the gypsum blocks was investigated. The results showed that the optimum W/S ratio, cement content and water-reducing agent are 0.9, 10% and 2 wt% for the calcined gypsum from titanium gypsum, respectively. The 5.96 MPa was attained after 7 days of ageing. It was also found that the citric acid is inappropriate to be used in the production of gypsum blocks from TiO2 production by-products.