Sensitivity and selectivity determination of bisphenol A using SWCNT-CD conjugate modified glassy carbon electrode

Facile Chemical Synthesis of Co-Ru-Based Heterometallic Supramolecular Polymer for Electrochemical Oxidation of Bisphenol A: Kinetics Study at the Electrode/Electrolyte Interface

Regardless of the adverse effects of Bisphenol A (BPA), its use in industry and in day-to-day life is increasing at a higher rate every year. In the present study, a simple and reliable chemical approach was used to develop an efficient BPA sensor based on a Co-Ru-based heterometallic supramolecular polymer (polyCoRu). Surface morphology and elemental analysis were examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). Furthermore, functional group analysis was accomplished by Fourier transform infrared spectroscopy (FT-IR). UV-vis spectroscopy was used to confirm the complexation in the ratio of 0.5:0.5:1 (metal 1/metal 2/ligand). Electrochemical characterization of the synthesized polyCoRu was conducted using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) analyses. The study identified two distinct linear dynamic ranges for the detection of BPA, 0.197-2.94 and 3.5-17.72 μM. The regression equation was utilized to determine the sensitivity and limit of detection (LOD), resulting in values of 0.6 μA cm-2 μM-1 and 0.02 μM (S/N = 3), respectively. The kinetics of BPA oxidation at the polyCoRu/GCE were investigated to evaluate the heterogeneous rate constant (k), charge transfer coefficient (α), and the number of electrons transferred during the oxidation and rate-determining step. A probable electrochemical reaction mechanism has been presented for further comprehending the phenomena occurring at the electrode surface. The practical applicability of the fabricated electrode was analyzed using tap water, resulting in a high percentage of recovery ranging from 96 to 105%. Furthermore, the reproducibility and stability data demonstrated the excellent performance of polyCoRu/GCE.

Selective fluorescent probe for sensitive determination of bisphenol A based on molecularly imprinted polymers decorated carbon dots derived from citric acid and ethylenediamine

Bisphenol A (BPA) is an endocrine disrupting chemical and poses a grave threat to the human health. Herein, a fluorescent probe constructed with molecularly imprinted polymers decorated carbon dots (CDs@MIPs) was proposed for determination of BPA with high selectivity. The CDs@MIPs were constructed using BPA, 4-vinylpyridine and ethylene glycol dimethacrylate as template, functional monomer and cross linker, respectively. The obtained fluorescent probe not only owned a highly selective recognition function derived from MIPs but also displayed an excellent sensitivity for sensing BPA stemmed from CDs. The fluorescence intensity of CDs@MIPs was varied before and after the removal of BPA templates. The fluorescent decrease fraction of the fluorescent probe demonstrates a nice linearity in BPA concentration range of 10-2000 nM (r² = 0.9998) and the detection limit is as low as 1.5 nM. The fluorescent probe was triumphantly utilized to sense the level of BPA in real aqueous and plastic samples with good results. Moreover, the fluorescent probe offered a wonderful means for fast identification and sensitive detection of BPA from environmental aqueous samples.

Competition-Based Two-Dimensional Photonic Crystal Dually Cross-Linked Supramolecular Hydrogel for Colorimetric and Fluorescent Dual-Mode Sensing of Bisphenol A

Bisphenol A (BPA), one of the most abundantly produced endocrine disrupting chemicals, is widely used in everyday plastic products and thus must be monitored. Multimode sensing platforms are able to combine the advantages of different strategies while solving the issues of inaccurate test results of single signal sensing. However, the exploration in this field is limited due to the compromise of sensing conditions and inevitable mutual interferences of different systems. Herein, we constructed a two-dimensional photonic crystal dually cross-linked supramolecular hydrogel (2DPCDCSH) by utilizing a host-guest pair of β-cyclodextrin (β-CD) and tert-butyl (t-Bu) as the second cross-linking for colorimetric and fluorescent dual-mode sensing of BPA. Based on the fact that BPA can act as a competitive guest to break the host-guest interaction between β-CD and t-Bu, the cross-linking density decreased and an expansion-induced structural color change occurred. Sensitive and selective BPA detection can be easily achieved by measuring the Debye diffraction ring diameter or observing the color change of 2DPC with a detection limit of 1 μg mL^-1. Moreover, the formation of the β-CD/BPA complex gave a significant enhancement of the intrinsic fluorescence of BPA, obtaining a detection limit of 0.001 μg mL^-1. The two sensing systems can share the same reaction condition and yield a wider dynamic response range than the single signal strategy. Overall, the proposed method presented an efficient, rapid, cost-effective, and regenerative dual-mode method for BPA analysis and shed new insights for the design of diversified sensing platforms.

Sensitive detection of noradrenaline in human whole blood based on Au nanoparticles embedded vertically-ordered silica nanochannels modified pre-activated glassy carbon electrodes

Sensitive determination of noradrenaline (NE), the pain-related neurotransmitters and hormone, in complex whole blood is of great significance. In this work, an electrochemical sensor was simply constructed on the pre-activated glassy carbon electrode (p-GCE) modified with vertically-ordered silica nanochannels thin film bearing amine groups (NH₂-VMSF) and in-situ deposited Au nanoparticles (AuNPs). The simple and green electrochemical polarization was employed to pre-activate GCE to realize the stable binding of NH₂-VMSF on the surface of electrode without the use of any adhesive layer. NH₂-VMSF was conveniently and rapidly grown on p-GCE by electrochemically assisted self-assembly (EASA). With amine group as the anchor sites, AuNPs were in-situ electrochemically deposited on the nanochannels to improve the electrochemical signals of NE. Owing to signal amplification from gold nanoparticles, the fabricated AuNPs@NH₂-VMSF/p-GCE sensor can achieve electrochemical detection of NE ranged from 50 nM to 2 μM and from 2 μM to 50 μM with a low limit of detection (LOD) of 10 nM. The constructed sensor exhibited high selectivity and can be easily regenerated and reused. Owing to the anti-fouling ability of nanochannel array, direct electroanalysis of NE in human whole blood was also realized.

Green Synthesis of ZnO/BC Nanohybrid for Fast and Sensitive Detection of Bisphenol A in Water

A nanohybrid of zinc oxide and biochar (ZnO/BC) with high conductivity was green synthesized using a simple hydrothermal method, and utilized for the sensitive detection of bisphenol A (BPA) by coating the nanohybrid film on an electrode of glassy carbon. The ZnO/BC presented greatly improved electrocatalytic performance and electron transfer ability compared to the zinc oxide and biochar. The ZnO/BC film-coated electrode could detect the BPA in aqueous solution within 3 min while neglected interference from higher concentrations of regularly existing ions and similar concentrations of estradiol (E2), phenol, dichlorophenol (DCP), and ethinylestradiol (EE2). Under optimal conditions, the linear range of BPA detection was 5 × 10−7~1 × 10−4 mol/L, with a detection limit of 1 × 10−7 mol/L, and the detection sensitivity was 92 mA/M. In addition, the ZnO/BC electrode could detect BPA in a real water sample with good signal recovery. This electrode, with the advantages of an easy preparation, low cost, and fast response time, could be potentially applicable for environmental monitoring.

Electrical and Electrochemical Sensors Based on Carbon Nanotubes for the Monitoring of Chemicals in Water-A Review

Carbon nanotubes (CNTs) combine high electrical conductivity with high surface area and chemical stability, which makes them very promising for chemical sensing. While water quality monitoring has particularly strong societal and environmental impacts, a lot of critical sensing needs remain unmet by commercial technologies. In the present review, we show across 20 water monitoring analytes and 90 references that carbon nanotube-based electrochemical sensors, chemistors and field-effect transistors (chemFET) can meet these needs. A set of 126 additional references provide context and supporting information. After introducing water quality monitoring challenges, the general operation and fabrication principles of CNT water quality sensors are summarized. They are sorted by target analytes (pH, micronutrients and metal ions, nitrogen, hardness, dissolved oxygen, disinfectants, sulfur and miscellaneous) and compared in terms of performances (limit of detection, sensitivity and detection range) and functionalization strategies. For each analyte, the references with best performances are discussed. Overall, the most frequently investigated analytes are H+ (pH) and lead (with 18% of references each), then cadmium (14%) and nitrite (11%). Micronutrients and toxic metals cover 40% of all references. Electrochemical sensors (73%) have been more investigated than chemistors (14%) or FETs (12%). Limits of detection in the ppt range have been reached, for instance Cu(II) detection with a liquid-gated chemFET using SWCNT functionalized with peptide-enhanced polyaniline or Pb(II) detection with stripping voltammetry using MWCNT functionalized with ionic liquid-dithizone based bucky-gel. The large majority of reports address functionalized CNTs (82%) instead of pristine or carboxyl-functionalized CNTs. For analytes where comparison is possible, FET-based and electrochemical transduction yield better performances than chemistors (Cu(II), Hg(II), Ca(II), H2O2); non-functionalized CNTs may yield better performances than functionalized ones (Zn(II), pH and chlorine).

Synthesis of hierarchically porous 3D polymeric carbon superstructures with nitrogen-doping by self-transformation: a robust electrocatalyst for the detection of herbicide bentazone

Bentazone (BEZ) is one of the utmost selective problematic contact-past herbicide with high toxicity for humans owing to feasible contamination of surface and ground water. In this work, an electrochemical sensor has been developed for the sensitive detection of BEZ, based on hierarchically porous three-dimensional (3D) carbon superstructures (CS)-modified electrodes. The CSs (namely, CS_HEX, CS_PY, CS_ACN, and CS_NOS) were prepared by the pyrolysis process from organic porous polyacrylonitrile (PAN) superstructure particles (namely, PAN_HEX, PAN_PY, PAN_ACN, and PAN_NOS) obtained by free radical polymerization method using different solvents (hexane, pyridine, acetonitrile, and also no solvent). The assembly with the working electrode of CSs causes the electrocatalytic BEZ oxidation by rapid electron transfer compared to the PAN superstructures and bare electrodes. Intriguingly, compared to all electrodes, CS_HEX-modified electrode showed the superior electrochemical detection of BEZ at a working potential of 0.99 V (vs. Ag/AgCl), very low detection limit (0.002 μM), wide dynamic linear range (0.03 to 200 μM), high sensitivity (9.95 μA μM^-1 cm^-2), and excellent reliability. The advanced sensors displayed an intensification of oxidation peak current of BEZ with high selectivity, remarkable sensitivity, and reproducibility for BEZ detection and received satisfactory outcomes designating the application of sensors for the determination of BEZ in river water samples.

da Silva Alves D, Okeke C, Breslin CB. Cyclodextrins as Supramolecular Recognition Systems: Applications in the Fabrication of Electrochemical Sensors

Supramolecular chemistry, although focused mainly on noncovalent intermolecular and intramolecular interactions, which are considerably weaker than covalent interactions, can be employed to fabricate sensors with a remarkable affinity for a target analyte. In this review the development of cyclodextrin-based electrochemical sensors is described and discussed. Following a short introduction to the general properties of cyclodextrins and their ability to form inclusion complexes, the cyclodextrin-based sensors are introduced. This includes the combination of cyclodextrins with reduced graphene oxide, carbon nanotubes, conducting polymers, enzymes and aptamers, and electropolymerized cyclodextrin films. The applications of these materials as chiral recognition agents and biosensors and in the electrochemical detection of environmental contaminants, biomolecules and amino acids, drugs and flavonoids are reviewed and compared. Based on the papers reviewed, it is clear that cyclodextrins are promising molecular recognition agents in the creation of electrochemical sensors, chiral sensors, and biosensors. Moreover, they have been combined with a host of materials to enhance the detection of the target analytes. Nevertheless, challenges remain, including the development of more robust methods for the integration of cyclodextrins into the sensing unit.

Metal–organic framework derived metal oxide/reduced graphene oxide nanocomposite, a new tool for the determination of dipyridamole

NICo₂O₄/NIO@MOF-5 rGO can detect dipyridamole at trace levels with high selectivity and sensitivity.

An Electrochemical Sensor Based on Gold Nanodendrite/Surfactant Modified Electrode for Bisphenol A Detection

In the present work, we reported the simple way to fabricate an electrochemical sensing platform to detect Bisphenol A (BPA) using galvanostatic deposition of Au on a glassy carbon electrode covered by cetyltrimethylammonium bromide (CTAB). This material (CTAB) enhances the sensitivity of electrochemical sensors with respect to the detection of BPA. The electrochemical response of the modified GCE to BPA was investigated by cyclic voltammetry and differential pulse voltammetry. The results displayed a low detection limit (22 nm) and a linear range from 0.025 to 10 µm along side with high reproducibility (RSD = 4.9% for seven independent sensors). Importantly, the prepared sensors were selective enough against interferences with other pollutants in the same electrochemical window. Notably, the presented sensors have already proven their ability in detecting BPA in real plastic water drinking bottle samples with high accuracy (recovery range = 96.60%-102.82%) and it is in good agreement with fluorescence measurements.

Rapid isolation and determination of bisphenol A in complicated matrices by magnetic molecularly imprinted electrochemical sensing

Because of its widespread distribution in the environment, bisphenol A (BPA) has become a global concern as an endocrine disruptor and a threat to human health through the food chain. Thus an efficient determination method is urgently needed for monitoring the levels of BPA. Herein, a novel electrochemical technique for the detection of BPA was performed by synchronous extraction and pre-concentration of BPA onto magnetic molecularly imprinted polymer (BMMIP), with subsequent readout on a magneto-actuated glassy carbon electrode (MGCE) by differential pulse voltammetry. Compared to the current methods of BPA determination, this BMMIP-based electrochemical sensor (BMMIPs@MGCE) not only simplifies the sample handling procedures substantially, without filtration, centrifugation, or other complex operations, but also can be easily renewed by a controllable magnetic field. As a sensor component, the core-shell BMMIPs exhibited excellent binding capacity (Q_e = 82.5 mg g^-1), short adsorption equilibrium time (30 s), and outstanding selectivity (k' = 7.239) towards BPA, as well as stability and recyclability. Importantly, the BMMIPs@MGCE sensor was successfully applied for the on-site monitoring and rapid detection of BPA in complicated real-world specimens, with good recoveries (81.31-119.77%) and a low limit of detection (0.133 μmol L^-1). Therefore, the stable and low-cost BMMIPs@MGCE sensor provides a new approach for the rapid determination of BPA in the field of environmental control and food safety. Graphical abstract.

Development of a new bisphenol A electrochemical sensor based on a cadmium(ii) porphyrin modified carbon paste electrode

In this study, the (5,10,15,20-tetrakis[(4-methoxyphenyl)]porphyrinato)cadmium(ii) complex ([Cd(TMPP)]) was successfully used as a modifier in a carbon paste electrode (CPE) and exploited for bisphenol A (BPA) detection. Analytical performance revealed two linear ranges from 0.0015-15 μM and 0.015-1.5 mM with a detection limit of 13.5 pM. The proposed method was implemented in water samples, which resulted in quantitative signals over the range 6.5-1000 μM with recoveries between 92.6 and 107.7% for tap water and between 96.6 to 106.0% for mineral water.

Recent Advances in Electrochemical Sensors and Biosensors for Detecting Bisphenol A

In recent years, several studies have focused on environmental pollutants. Bisphenol A (BPA) is one prominent industrial raw material, and its extensive utilization and release into the environment constitute an environmental hazard. BPA is considered as to be an endocrine disruptor which mimics hormones, and has a direct relationship to the development and growth of animal and human reproductive systems. Moreover, intensive exposure to the compound is related to prostate and breast cancer, infertility, obesity, and diabetes. Hence, accurate and reliable determination techniques are crucial for preventing human exposure to BPA. Experts in the field have published general electrochemical procedures for detecting BPA. The present timely review critically evaluates diverse chemically modified electrodes using various substances that have been reported in numerous studies in the recent decade for use in electrochemical sensors and biosensors to detect BPA. Additionally, the essential contributions of these substances for the design of electrochemical sensors are presented. It has been predicted that chemically modified electrode-based sensing systems will be possible options for the monitoring of detrimental pollutants.

Synthesis of a hierarchically structured Fe3O4–PEI nanocomposite for the highly sensitive electrochemical determination of bisphenol A in real samples

In this work, a novel, highly sensitive and cost-effective sensing electrode was fabricated for the sensitive detection of bisphenol A in milk and water samples.

Tailoring MWCNTs and β-Cyclodextrin for Sensitive Detection of Acetaminophen and Estrogen

Monitoring of trace amount of acetaminophen and estrogen in drinking water is of great importance because of their potential links to gastrointestinal diseases and breast and prostate cancers. The sensitive and accurate detection of acetaminophen and estrogen requires the development of advanced sensing materials that possess appropriate number of analyte-capturing sites and suitable signal conduction path. This can be achieved by implementing appropriate chemical attachment of multiwalled carbon nanotubes (MWCNTs) and β-cyclodextrin (βCD). Here, we report a systematic investigation of four types of modified MWCNT-βCD: (1) physical mixing, (2) "click reaction", (3) thionyl chloride esterification, and (4) Steglich esterification. The Steglich esterification is a one-step approach with shorter reaction time, lower reaction temperature, and eliminates handling of air/moisture-sensitive reagents. MWCNT-βCD prepared by Steglich esterification possessed moderate βCD loading (5-10 wt %), large effective surface area, and fast electron transfer. The host-guest interaction of βCD and redox properties of MWCNT enabled sensitive detection of acetaminophen and 17β-estradiol (E2 is a primary female sex hormone) in the range of 0.005-20 and 0.01-15 μM, with low detection limits of 3.3 and 2.5 nM, respectively. We demonstrated accurate detection results of pharmaceutical compositions in water and urine samples. These results indicate that Steglich esterification method may be applied in fabricating pharmaceutical contaminants sensors for health and environmental applications.

Advances in sensing and biosensing of bisphenols: A review

Bisphenols (BPs) are well known endocrine disrupting chemicals (EDCs) that cause adverse effects on the environment, biotic life and human health. BPs have been studied extensively because of an increasing concern for the safety of the environment and for human health. They are major raw materials for manufacturing polycarbonates, thermal papers and epoxy resins and are considered hazardous environmental contaminants. A vast array of sensors and biosensors have been developed for the sensitive screening of BPs based on carbon nanomaterials (carbon nanotubes, fullerenes, graphene and graphene oxide), quantum dots, metal and metal oxide nanocomposites, polymer nanocomposites, metal organic frameworks, ionic liquids and molecularly imprinted polymers. This review is devoted mainly to a variety of sensitive, selective and reliable sensing and biosensing methods for the detection of BPs using electrochemistry, fluorescence, colorimetry, surface plasmon resonance, luminescence, ELISAs, circular dichroism, resonance Rayleigh scattering and adsorption techniques in plastic products, food samples, food packaging, industrial wastes, pharmaceutical products, human body fluids and many other matrices. It summarizes the advances in sensing and biosensing methods for the detection of BPs since 2010. Furthermore, the article discusses challenges and future perspectives in the development of novel sensing methods for the detection of BP analogs.

Highly-sensitive electrocatalytic determination for toxic phenols based on coupled cMWCNT/cyclodextrin edge-functionalized graphene composite

Highly-sensitive electrocatalytic determination of toxic phenol compounds is of significance in environmental monitoring due to their low degradation and high toxicity to the environment and humans. In this paper, a rapid and sensitive electrochemical sensor based on coupled carboxyl-multi-walled carbon nanotube (cMWCNT) and cyclodextrin (CD) edge-functionalized graphene composite was successfully employed towards trace detection of three typical phenols (4-aminophenol, 4-AP; 4-chlorophenol, 4-CP; 4-nitrophenol, 4-NP). The morphology studies from scanning electron microscope and transmission electron microscope analysis revealed that cMWCNTs as conductive bridges were successfully incorporated into CD edge-functionalized graphene layers. Further, The electrocatalytic detection performance of the 3D simultaneously reduced and self-assembled sensing architecture (GN-CD-cMWCNT) with trace amounts of CDs was evaluated. The electrochemical studies demonstrated that GN-CD-cMWCNT displays excellent electrocatalytic activity, high sensitivity and stability. Under optimal conditions, the current responses of 4-AP, 4-CP and 4-NP are linear to concentrations over two different ranges, with low detection limit of 0.019, 0.017 and 0.027μM (S/N=3), respectively. And, GN-CD-cMWCNT shows an excellent anti-interference ability against electroactive species and metal ions. In addition, validation of the applicability of the presented sensor was also performed for the determination of three phenols in tap water sample with satisfactory results.

A highly sensitive and specific capacitive aptasensor for rapid and label-free trace analysis of Bisphenol A (BPA) in canned foods

A rapid, highly sensitive, specific and low-cost capacitive affinity biosensor is presented here for label-free and single step detection of Bisphenol A (BPA). The sensor design allows rapid prototyping at low-cost using printed circuit board material by benchtop equipment. High sensitivity detection is achieved through the use of a BPA-specific aptamer as probe molecule and large electrodes to enhance AC-electroelectrothermal effect for long-range transport of BPA molecules toward electrode surface. Capacitive sensing technique is used to determine the bounded BPA level by measuring the sample/electrode interfacial capacitance of the sensor. The developed biosensor can detect BPA level in 20s and exhibits a large linear range from 1 fM to 10 pM, with a limit of detection (LOD) of 152.93 aM. This biosensor was applied to test BPA in canned food samples and could successfully recover the levels of spiked BPA. This sensor technology is demonstrated to be highly promising and reliable for rapid, sensitive and on-site monitoring of BPA in food samples.

Ultrasensitive Bisphenol A Field-Effect Transistor Sensor Using an Aptamer-Modified Multichannel Carbon Nanofiber Transducer

Bisphenol A (BPA) is a known endocrine-disrupting compound (EDC) that has a structure similar to that of the hormone estrogen. Even low concentrations of BPA are able to bind estrogen receptors, thereby inducing severe diseases such as reproductive disorders, chronic diseases, and various types of cancer. Despite such serious effects, the use of BPA remains widespread. Therefore, monitoring of both dietary and nondietary exposure to BPA is important for human healthcare. Herein, we present a field-effect transistor (FET) sensor using aptamer-modified multichannel carbon nanofibers (MCNFs) to detect BPA. The MCNFs are fabricated via single-nozzle electrospinning of two immiscible polymer solutions followed by thermal treatment in an inert atmosphere. The MCNFs are then oxidized using a solution of HNO3 and H2SO4 to introduce carboxyl groups on the surface of the fibers. The carboxyl-functionalized MCNFs (CMCNFs) are immobilized on an amine-functionalized electrode substrate by forming a covalent bond, and amine-functionalized BPA-binding aptamers are modified in the same manner on the CMCNFs. The resulting FET sensors exhibit a high sensitivity, as well as specificity toward BPA at an unprecedentedly low concentration of 1 fM. Furthermore, these sensors are stable and could be reused for repeated assays.

Microwave-assisted synthesis of carbon dots–zinc oxide/multi-walled carbon nanotubes and their application in electrochemical sensors for the simultaneous determination of hydroquinone and catechol

Cyclic voltammetry of HQ and CC recorded on Nafion/CDs–ZnO/MWCNTs/GCE.

A novel SWCNT platform bearing DOTA and β-cyclodextrin units. "One shot" multidecoration under microwave irradiation

The functionalization of single-walled carbon nanotubes (SWCNTs) via microwave-assisted grafting reactions enables efficient multidecoration in a single step. A novel water-soluble SWCNT platform was prepared via the simple 1,3-dipolar cycloaddition of azomethine ylides under dielectric heating. Thanks to a single grafting reaction the CNT surface binds in a 1 : 1 ratio an amino acidic β-cyclodextrin (β-CD) derivative and the DOTAMA moiety (1,4,7,10-tetraazacyclododecane-N,N',N'',N'''-tetraacetic acid monoamide). This novel "one shot" synthesis, compared with multistep functionalizations, preserves the SWCNT's structural integrity (TEM images). Besides thermogravimetric analyses, the determination of the amount of β-CD and DOTA moieties grafting onto the SWCNT's surface was performed on the basis of phenolphthalein and gadolinium complexation, respectively.

Construction of a nanostructure-based electrochemical sensor for voltammetric determination of bisphenol A

A novel carbon paste electrode modified with graphene oxide nanosheets and an ionic liquid (n-hexyl-3-methylimidazolium hexafluoro phosphate) was fabricated. The electrochemical study of the modified electrode, as well as its efficiency for voltammetric oxidation of bisphenol A, is described. The electrode was also employed to study the electrochemical oxidation of bisphenol A, using cyclic voltammetry, chronoamperometry, square wave voltammetry and electrochemical impedance spectroscopy as diagnostic techniques. Square wave voltammetry exhibits a linear dynamic range from 9.0 × 10(-8) to 2.5 × 10(-4) M and a detection limit of 55.0 nM for bisphenol A. Finally, this new sensor was used for determination of bisphenol A in water samples using the standard addition method.

Electrochemical sensing of bisphenol A by graphene-1-butyl-3-methylimidazolium hexafluorophosphate modified electrode

Simple and low cost sensor for the determination of bisphenol A (BPA) based on graphene-1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF6) modified glassy carbon electrode was developed. It was an irreversible oxidation process of BPA on the modified electrode. Experimental conditions such as modified volume, pH, scan rate and accumulation time have been optimized. The modified electrode provided a considerable enhancement of BPA oxidation. The electrochemical response of BPA on this modified electrode was better than those on the graphene modified electrode and bare electrode. The detection limit of BPA was 8nM (S/N=3), the linear range was from 20nM to 2µM. The modified electrode has been employed for determination of milk and soda spiked BPA successfully.