Assessment of the efficiency of photocatalysis on tetracycline biodegradation

Efficient degradation of venlafaxine using intimately coupled high-active crystal facets exposed TiO2 and biodegradation system: Kinetic studies, biofilm stress behavior and transformation mechanism

Intimately coupled photocatalysis and biodegradation (ICPB) system is a potential wastewater treatment technology, of which TiO2-based ICPB system has been widely studied. There are many ways to improve the degradation efficiency of the ICPB process, but no crystal facet engineering method has been reported yet. In this work, a new ICPB system coated with NaF-TiO2 exposing high energy facets was designed to degrade biorecalcitrant psychotropic drug - venlafaxine (VNF). Initially, the TiO2 crystal surface was modified with NaF, resulting in the formation of NaF-TiO2 with a 14.4% increase in the exposure ratio of (001). The contribution rate of ·OH was increased by 9.5%, and the contribution rate of h+ was increased by 33.2%. Next, NaF-TiO2 was loaded onto the surface of the sponge carrier, and then the ICPB system was constructed after about 15 days of biofilm formation. After the ICPB system was acclimated with VNF, the removal rate of COD decreased significantly (the lowest was 62.7%), but that of ammonia nitrogen remained at 50.5 ± 6.0% and the extracellular polymeric substance (EPS) secretion increased by 84.1 mg/g VSS. According to the high throughput results, at the phylum level, Proteobacteria and Chloroflexi together maintain the nitrogen removal capability and structural stability of the ICPB system. The relative abundance of Bacteroidota was significantly increased by 14.2%, suggesting that there may be some correlation between Bacteroidota and certain metabolites of the anti-depressant active ingredients. At the genus level, the Thauera (3.1%∼11.5%) is the major bacterial group that secretes EPS, protecting biofilm against external influences. Most of the changes in microorganisms are consistent with the decontamination properties and macroscopic appearance of EPS in the ICPB system. Finally, the degradation efficiency of ICPB system for VNF was investigated (92.7 ± 3.8%) and it was mostly through hydroxylation and demethylation pathways, with more small molecular products detected, providing the basis for biological assimilation of VNF. Collectively, the NaF-TiO2 based ICPB system would be lucrative for the future degradation of venlafaxine.

Photocatalytic adsorption/degradation of tetracycline by S-scheme BiOI/BiOIO3 p-n heterojunction from dissociation of BiOIO3in-situ solvothermal process

The pollution of tetracycline (TC) had attracted more and more attention due to its unprecedented use and potential hazards. The S-scheme BiOI/BiOIO3 p-n heterojunction was successfully fabricated by in-situ solvothermal treatment of BiOIO3, and was used for the removal of TC from aqueous solutions. The results demonstrated that the construction of S-scheme p-n heterojunction could significantly improve the removal of TC by photocatalytic adsorption/degradation synergism. The removal rate of TC was significantly enhanced after solvothermal modification. The three main reasons for the enhanced removal efficiency were as follows: first, the light absorption range of the BiOIO3 was enhanced by solvothermal treatment; secondly, the construction of the heterojunction was beneficial to the valid separation and migration of the photo-generated carriers; finally, the adsorption of TC enhanced the speed of TC reaching the semiconductor interface and reacting with active species. Trapping tests were conducted to reveal that •O2- and 1O2 are the main reactive species for TC degradation. The nine degradation products were identified by the high performance liquid chromatography-mass spectrometry (HPLC-MS), and the three reaction pathways were deduced. A possible S-scheme p-n heterojunction photocatalytic mechanism was presented on the basis of band structures and active species capturing experiment.

Oxidation of chlortetracycline and its isomers by Botrytis aclada laccase in the absence of mediators: pH dependence and identification of transformation products by LC-MS

Tetracyclines are antibiotics considered emerging pollutants and currently, wastewater treatment plants are not able to remove them efficiently. Laccases are promising enzymes for bioremediation because they can oxidize a wide variety of substrates. The aim of this study was to evaluate the Botrytis aclada laccase for the oxidation of chlortetracycline and its isomers in the absence of a mediator molecule, at a pH range between 3.0 to 7.0, and to characterize the transformation products by LC-MS. Chlortetracycline and three isomers were detected in both, controls and reaction mixtures at 0 h and in controls after 48 h of incubation but in different proportions depending on pH. An additional isomer was also detected, but only in the presence of BaLac. Based on the transformation products identified in the enzymatic reactions and information from literature, we assembled a network of transformation pathways starting from chlortetracycline and its isomers. The spectrometric analysis of the products indicated the probable occurrence of oxygen insertion, dehydrogenation, demethylation and deamination reactions. Four new products were identified, and we also described a novel transformation product without the chloro group. We observed that increasing pH led to higher diversity of main products. This is the first study using the laccase from fungi Botrytis aclada to oxidate chlortetracycline and its isomers and it can be considered as an ecological alternative to be used in bioremediation processes such as wastewater.

An eco-friendly self-assembled catalyst preparation and study of tetracycline degradation: Performance, mechanism to application

Chloromethyl styrene resin can undergo specific chemical modifications and is an excellent adsorbent material for treating difficult-to-degrade substances in wastewater. In this study, chloromethyl styrene resin will be used as a carrier, and polystyrene chloromethyl resin (PS-Cl) was converted into PS-NH2 by amino modification. The self-assembly of cobalt-based metal-organic framework (CoMOF) was induced on the surface of PS-NH2 by using a novel preparation technique. The performance of the prepared PS-NH2@CoMOF self-assembled catalysts with core-shell-like structures in degrading the target pollutant, tetracycline (TC), was evaluated. The catalysts effectively induced rapid OH radical production from H2O2, had a degradation rate of as high as 88.3 % for 20 mg/L TC solution, and were highly stable and adaptable to aqueous environments. Free radicals and intermediates in the catalytic degradation process were detected by electron paramagnetic resonance and high-performance liquid chromatography mass spectrometry, and possible catalytic degradation pathways were analyzed. The catalytic dissociation behavior of H2O2 in the presence of different catalysts was studied in depth and compared with that of similar metal-organic framework materials through density-functional theory calculations. Results demonstrated the excellent performance of the PS-NH2@CoMOF catalysts. Finally, the catalysts' potential for use in practical engineering applications was evaluated with a flow column experimental model, and the results were more than satisfactory. Therefore, the use of the catalysts to degrade TC has great potential.

Enhanced photolysis of tetracycline by Zn(II): Role of complexation

Zn(II) is a necessary additive during antibiotic production and aquaculture, leading to the coexistence of Zn(II) and antibiotics in aquatic environment, especially in receiving waters of pharmaceutical and aquaculture wastewater. However, the roles of Zn(II) in the photochemical behavior of antibiotics are still not clear, which limits the understanding of the fate of antibiotic in nature. In this study, tetracycline (TC) was selected as typical antibiotic to evaluate the effect of Zn(II) on antibiotic photolysis. The removal of TC was accelerated by 22.75 % with TC:Zn(II) molar ratio at 1:5. The mechanism of Zn(II)-induced TC photolysis was explored via reactive oxygen species (ROS) analysis and density functional theory (DFT) calculation for the first time. Zn(II) could enhance the formation of TC excited states and further produce more singlet oxygen (12.54 % higher than control group) to promote indirect photolysis. Besides, Zn(II) could react with TC via complexation, and the complex was more vulnerable to attack by reactive oxygen species due to more active sites. Furthermore, the structure and toxicity of intermediates were identified with mass spectrometer, T.E.S.T. and ECOSAR software. Zn(II) hardly changed the degradation path of TC, and TC was mainly degraded via ring opening, demethylation, deamidation, and hydrogen abstraction with more toxic intermediates than the parent molecule. This work is significant to better understand the environmental fate of antibiotics, and also provides new insight into wastewater treatment in the pharmaceutical and aquaculture industry.

Fabrication of water-floating litchi-like polystyrene-sphere-supported TiO2/Bi2O3 S-scheme heterojunction for efficient photocatalytic degradation of tetracycline

The exploration of advanced photocatalysts for antibiotic degradation is critical, but it remains a challenge due to the lack of rational structural design and in-depth insights into molecular oxygen activation. Water-floating photocatalysts could be one of the best choices owing to their technical features in terms of reasonability and efficiency involving a high oxygenation of photocatalyst surface, fully solar irradiation, and simple recycling and reuse. Herein, a floatable litchi-like architecture of a polystyrene-sphere-supported TiO2/Bi2O3 (PS@TiO2/Bi2O3) S-scheme heterojunction was skillfully constructed and evaluated for photodegradation of model tetracycline (TC) antibiotics. By integrating the advantages of floatability and S-scheme, the TC removal rate of the optimal PS@TiO2/Bi2O3-0.4 catalyst can reach 88.4% under 1 h illumination, which is higher than that of pristine Bi2O3 (60.8%) and PS@TiO2 (40.1%). Moreover, PS@TiO2/Bi2O3-0.4 exhibits high recyclability and stability, and there is no significant loss of activity after five cycles of repeated use. With the aid of liquid chromatography-mass spectrometry analysis and density functional theory calculations, a reasonable degradation pathway for TC was proposed. The present work provides a recyclable and efficient approach for the photodegradation of TC, expecting to guide the innovative exploitation of other environmental systems.

TET-Yeasate: An engineered yeast whole-cell lysate-based approach for high performance tetracycline degradation

The widespread of tetracycline (TC) residues in anthropogenic and natural environments pose an immediate threat to public health. Herein, we established the TET-Yeasate, an approach based on whole-cell lysate of engineered yeast, to mitigate the TC contamination in environment. The TET-Yeasate is defined as the biological matrix of whole cell lysate from engineered yeast that containing TC-degradative components (Tet(X), NADPH, Mg2+) and protective macromolecules. The TET-Yeasate was able to efficiently eliminate TC residues in tap water (98.8%), lake water (77.6%), livestock sewage (87.3%) and pharmaceutical wastewater (35.3%) without necessity for exogenous addition of expensive cofactors. The TET-Yeasate was further developed into lyophilized form for ease of storage and delivery. The TET-Yeasate in lyophilized form efficiently removed up to 74.6% TC residue within 0.25 h. In addition, the lyophilization confers promising resilience to TET-Yeasate against adverse temperatures and pH by maintaining degradation efficacy of 85.69%-97.83%. The stability test demonstrated that the biomacromolecules in lysate served as natural protectants that exerted extensive protection on TET-Yeasate during the 14-day storage at various conditions. In addition, 5 potential degradation pathways were elaborated based on the intermediate products. Finally, the analysis indicated that TET-Yeasate enjoyed desirable bio- and eco-safety without introduction of hazardous intermediates and spread of resistance genes. To summary, the TET-Yeasate based on whole cell lysate of engineered yeast provides a cost-effective and safe alternative to efficiently remove TC residues in environment, highlighting the great potential of such whole-cell based methods in environmental decontamination.

Multi-criteria decision-making for prioritizing photocatalytic processes followed by TiO2-MIL-53(Fe) characterization and application for diazinon removal

Multi-criteria decision-making (MCDM) can introduce the best option based on evidence. We integrated the Analytic Hierarchy Process (AHP) and the Technique for Order of Preference by Similarity to the Ideal Solution (TOPSIS) to prioritize the alternatives for photocatalytic diazinon removal in a bench scale and characterized TiO₂-MIL-53(Fe) for this purpose. Criteria and alternatives were listed based on systematic literature reviews and expert opinions. Then, AHP and TOPSIS questionnaires were developed and distributed to an expert panel for pairwise comparisons. We converted the linguistic variables into the corresponding fuzzy values and used R for mathematical calculations. Then, TiO₂-MIL-53(Fe) was synthesized and characterized for diazinon removal under LED visible light. The AHP ranked criteria as availability > degradation efficiency > safety for the environment > material cost > energy consumption > mineralization efficiency > photocatalyst reusability > safety for personnel > equipment cost. Based on TOPSIS, the order of alternatives was TiO₂-containing/Visible light > ZnO-containing/UV light > TiO₂-containing/UV light > ZnO-containing/Visible light > WO₃-containing/UV light. With a bandgap of 1.8 eV, TiO₂-MIL-53(Fe) could remove 89.35% of diazinon at 10 mg/L diazinon concentration, 750 mg/L catalyst dose, pH 6.8, and 180-min reaction time. Hybrid AHP-TOPSIS identified the best option for photocatalytic diazinon removal from aqueous solutions. Thus, MCDM techniques can use systematic review results to overcome the uncertainty in designing experimental studies.

Direction regulation of interface carrier transfer and enhanced photocatalytic oxygen activation over Z-scheme Bi4V2O11/Ag/AgCl for water purification

Molecular oxygen activation is essential to the photocatalytic oxidation reaction, which is highly dependent on the construction of active sites and efficient charge transfer of photocatalysts. In this study, we constructed Bi₄V₂O₁₁/Ag/AgCl Z-type heterojunction photocatalysts with significantly enhanced molecular oxygen activation capacity. The systematic characterization and analysis including X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations confirmed that the formation of efficient Z-type heterostructure could be attributed to the introduction of Ag nanoparticles (NPs), which regulated the electron transfer direction from Bi₄V₂O₁₁ to AgCl. Owing to the advantage of enhanced charge transfer efficiency, the O₂^- generation capacity of Bi₄V₂O11/Ag/AgCl Z-scheme heterojunction was as high as 4.6 times that of pure Bi₄V₂O₁₁. Consequently, Bi₄V₂O₁₁/Ag/AgCl showed good degradation performance against tetracycline (TC), ciprofloxacin (CIP), ranitidine hydrochloride (RAN) and 2,4-dichlorophenoxyacetic acid (2,4-D) under visible light, and their degradation rates were 8.2 times, 5.9 times, 3.8 times and 11.9 times higher than those of Bi₄V₂O₁₁, respectively. This study provides an effective and feasible strategy to design photocatalyst with improved molecular oxygen activation efficiency.

Electrospun Membranes Anchored with g-C3N4/MoS2 for Highly Efficient Photocatalytic Degradation of Aflatoxin B1 under Visible Light

The degradation of aflatoxin (AF) is a topic that always exists along with the food and feed industry. Photocatalytic degradation as an advanced oxidation technology has many benefits, including complete inorganic degradation, no secondary contamination, ease of activity under moderate conditions, and low cost compared with traditional physical, chemical, and biological strategies. However, photocatalysts are usually dispersed during photocatalytic reactions, resulting in energy and time consumption in the separation process. There is even a potential secondary pollution problem from the perspective of food safety. In this regard, three electrospun membranes anchored with g-C₃N₄/MoS₂ composites were prepared for highly efficient photocatalytic degradation of aflatoxin B₁ (AFB₁) under visible light. These photocatalytic membranes were characterized by XRD, SEM, TEM, FTIR, and XPS. The factors influencing the degradation efficiency of AFB₁, including pH values and initial concentrations, were also probed. The three kinds of photocatalytic membranes all exhibited excellent ability to degrade AFB₁. Among them, the photocatalytic degradation efficiency of the photocatalytic membranes prepared by the coaxial methods reached 96.8%. The experiment is with an initial concentration of 0.5 μg/mL (500 PPb) after 60 min under visible light irradiation. The mechanism of degradation of AFB₁ was also proposed based on active species trapping experiments. Moreover, the prepared photocatalytic membranes exhibited excellent photocatalytic activity even after five-fold use in the degradation of AFB₁. These studies showed that electrospun membranes anchored with g-C₃N₄/MoS₂ composites have a high photocatalytic ability which is easily removed from the reacted medium for reuse. Thereby, our study offers a highly effective, economical, and green solution for AFB₁ degradation in the foodstuff for practical application.

Visible-light driven p-n heterojunction formed between α-Bi2O3 and Bi2O2CO3 for efficient photocatalytic degradation of tetracycline

To improve the efficiency of photocatalytic oxidative degradation of antibiotic pollutants, it is essential to develop an efficient and stable photocatalyst. In this study, a polymer-assisted facile synthesis strategy is proposed for the polymorph-controlled α-Bi₂O₃/Bi₂O₂CO₃ heterojunction retained at elevated calcination temperatures. The p-n heterojunction can effectively separate and migrate electron-hole pairs, which improves visible-light-driven photocatalytic degradation from tetracycline (TC). The BO-400@PAN-140 photocatalyst achieves the highest pollutant removal efficiency of 98.21% for photocatalytic tetracycline degradation in 1 h (λ > 420 nm), and the degradation efficiency was maintained above 95% after 5 cycles. The morphology, crystal structure, and chemical state of the composites were analysed by scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Ultraviolet-visible diffuse reflection, transient photocurrent response, and electrochemical impedance spectroscopy were adopted to identify the charge transfer and separation efficiency of photogenerated electron-hole pairs. The EPR results verified h⁺ and ˙OH radicals as the primary active species in the photocatalytic oxidation reactions. This observation was also consistent with the results of radical trapping experiments. In addition, the key intermediate products of the photocatalytic degradation of TC over BO-400@PAN-140 were identified via high-performance liquid chromatography-mass spectrometry, which is compatible with two possible photocatalytic reaction pathways. This work provides instructive guidelines for designing heterojunction photocatalysts via a polymer-assisted semiconductor crystallographic transition pathway for TC degradation into cleaner production.

A critical review on retaining antibiotics in liquid digestate: Potential risk and removal technologies

Substantial levels of antibiotics remain in liquid digestate, posing a significant threat to human safety and the environment. A comprehensive assessment of residual antibiotics in liquid digestate and related removal technologies is required. To this end, this review first evaluates the potential risks of the residual antibiotics in liquid digestate by describing various anaerobic digestion processes and their half-lives in the environment. Next, emerging technologies for removing antibiotics in liquid digestate are summarized and discussed, including membrane separation, adsorption, and advanced oxidation processes. Finally, this study comprehensively and critically discusses these emerging technologies' prospects and challenges, including techno-economic feasibility and environmental impacts.

Tetracycline biotransformation by a novel bacterial strain Alcaligenes sp. T17

Comprehensive knowledge on the biotransformation of tetracycline (TC) is critical for the improvement of TC removal in the bioremediation process. This work isolated a novel TC-degrading bacterial strain Alcaligenes sp. T17 and explored its degradation ability under different conditions. Temperature and pH could affect the degradation efficiency, and higher temperature as well as neutral and weakly acidic conditions were conducive to the biotransformation. Response surface methodology predicted the maximum degradation rate of TC (94.35%) under the condition of 25.15 mg/L TC, pH 7.23, and inoculation dosage 1.17% at 40 °C. According to the result of disk diffusion tests, the biodegradation products had lower antimicrobial potency than the parent compound. Five potential biodegradation products were identified, and a possible degradation pathway (degrouping, oxidation and ring-opening) was proposed. The draft genome of strain T17 was also determined. Genomic analysis indicated that strain T17 harbored multiple genes that participated in the metabolism of aromatic compounds as well as genes encoding oxygenases. These functional genes may be relevant to TC biotransformation. This study could provide new insights towards the biotransformation of TC mediated by bacteria.

Tetracycline removal enhancement with Fe-saturated nanoporous montmorillonite in a tripartite adsorption/desorption/photo-Fenton degradation process

The adsorption and photo-Fenton degradation of tetracycline (TC) over Fe-saturated nanoporous montmorillonite was analyzed. The synthesized samples were characterized using XRD, FTIR, SEM, and XRF analysis, and the adsorption and desorption of TC onto these samples, as well as the antimicrobial activity of TC during these processes, were analyzed at different pH. Initially, a set of adsorption/desorption experiments was conducted, and surprisingly, up to 50% of TC adsorbed was released from Mt structure. Moreover, the desorbed TC had strong antibacterial activity. Then, an acid treatment (for the creation of nanoporous layers) and Fe saturation of the montmorillonite were applied to improve its adsorption and photocatalytic degradation properties over TC. Surprisingly, the desorption of TC from modified montmorillonite was still high up to 40% of adsorbed TC. However, simultaneous adsorption and photodegradation of TC were detected and almost no antimicrobial activity was detected after 180 min of visible light irradiation, which could be due to the photo-Fenton degradation of TC on the modified montmorillonite surface. In the porous structures of modified montmorillonite high, ˙OH radicals were created in the photo-Fenton reaction and were measured using the Coumarin technique. The ˙OH radicals help the degradation of TC as proposed in an oxidation process. Surprisingly, more than 90% of antimicrobial activity of the TC decreased under visible light (after 180 min) when desorbed from nanoporous Fe-saturated montmorillonite compared to natural montmorillonite. To the best of our knowledge, this is the first time that such a high TC desorption rate from an adsorbent with the least residual antimicrobial activity is reported which makes nanoporous Fe-saturated montmorillonite a perfect separation substance of TC from the environment.

Adsorption performance of tetracycline on NiFe layered double hydroxide hollow microspheres synthesized with silica as the template

Tetracycline (TC) has poor degradability and hepatotoxicity which will increase the burden on the aquatic environment when discharged into lakes in large quantities. LDH materials are often used as adsorbents because of their superior surface area and controllability of morphology. Herein, NiFe LDH hollow microspheres (NFHMS) were synthesized by a facile hydrothermal method. The removal of tetracycline by the as-prepared material in an aquatic environment was systematically investigated through comprehensive characterizations. The NFHMS sample presents a larger specific surface area than the two control samples, which contributes to its higher adsorption performance. The adsorption mechanisms of TC on NFHMS is mainly electrostatic adsorption. The fitting results of experimental data coincide well with pseudo-second-order and Weber-Morris models through kinetic simulation. Moreover, the Langmuir model is verified to be more suitable than the Freundlich model in elucidating molecular surface adsorption, and the maximum adsorption capacity of NFHMS obtained from the Langmuir model is 90.9 mg g^-1. Higher temperature is beneficial to improve the adsorption performance, and the adsorption process is spontaneous and endothermic. The initial pH of the solution will affect the adsorption capacity, and the partial neutral condition is more favorable. In addition, NFHMS sample exhibits good stability in cyclic tests. Therefore, NFHMS material is expected to be a very promising adsorbent for treating tetracycline in wastewater.

Investigation on visible-light photocatalytic performance and mechanism of zinc peroxide for tetracycline degradation and Escherichia coli inactivation

In this study, zincperoxide (ZnO₂) with broad energy gap was firstly used for visible-light-induced photocatalytic degradation of tetracycline (TC) and inactivation of Escherichia coli (E. coli). A small amount of ZnO₂ (10 mg) could efficiently degrade 100 mL of 50 mg/L TC in a wide pH range (4-12), and the degradation performance was rarely suppressed by common matrix species and natural water sources. Also, 100 mg/L ZnO₂ could inactivate around 7-log E. coli cells within 60 min under visible-light irradiation. Quenching experiments and electron paramagnetic resonance (EPR) results confirmed that superoxide radical (•O₂^-) and singlet oxygen (¹O₂) were the main reactive oxygen species (ROS), which were attributed to the self-sensitization of TC and the photoexcitation of released H₂O₂ under the catalysis of Zn(OH)₂ from the hydrolysis of partial ZnO₂, respectively. The pathways of TC degradation and processes of visible-light-induced TC degradation and E. coli inactivation were proposed and deduced in detail. This work presented the enhanced visible-light photocatalytic activities of ZnO₂ for antibiotic degradation and bacterial inactivation, and provided a deep insight into the mechanisms of visible-light-induced TC degradation andE. coli inactivation over ZnO₂.

New insight into transformation of tetracycline in presence of Mn(II): Oxidation versus photolysis

Tetracycline (TC) and Mn(II) is a common antibiotic and metal ion respectively. Nevertheless, literatures involving in the effects of Mn(II) on TC transformation are still insufficient. In this study, the kinetic experiment, spectral analysis, complexation experiment and electrochemical analysis, theoretical calculation and products detection were carried out to probe into oxidation and photolysis of TC with Mn(II). Mn(II) greatly accelerated TC oxidation, preferably tending to complex with TC at O10 - O12 or O2 - O3 site. There were a TC-Mn(II)/TC-Mn(III) redox couple and electron transfer process. Conversely, Mn(II) inhibited photolysis of TC. The photolysis of excited TC could compete with energy dissipation reactions. The electron transfer and complexation reaction easily made excited TC energy transfer, thus slowing down photolysis process. During the TC transformation, the intensity of functional groups was significantly decreased. Simultaneously, the degradation pathways mainly included eight reactions. It is a very interesting and probably overlooked phenomenon, which identifies new transformation of TC with Mn(II). This study helps to further understand fate and environmental behavior of antibiotics and metal ion.

A comprehensive review on biodegradation of tetracyclines: Current research progress and prospect

The release of tetracyclines (TCs) in the environment is of significant concern because the residual antibiotics may promote resistance in pathogenic microorganisms, and the transfer of antibiotic resistance genes poses a potential threat to ecosystems. Microbial biodegradation plays an important role in removing TCs in both natural and artificial systems. After long-term acclimation, microorganisms that can tolerate and degrade TCs are retained to achieve efficient removal of TCs under the optimum conditions (e.g. optimal operational parameters and moderate concentrations of TCs). To date, cultivation-based techniques have been used to isolate bacteria or fungi with potential degradation ability. Moreover, the biodegradation mechanism of TCs can be unveiled with the development of chemical analysis (e.g. UPLC-Q-TOF mass spectrometer) and molecular biology techniques (e.g. 16S rRNA gene sequencing, multi-omics sequencing, and whole genome sequencing). In this review, we made an overview of the biodegradation of TCs in different systems, refined functional microbial communities and pure isolates relevant to TCs biodegradation, and summarized the biodegradation products, pathways, and degradation genes of TCs. In addition, ecological risks of TCs biodegradation were considered from the perspectives of metabolic products toxicity and resistance genes. Overall, this article aimed to outline the research progress of TCs biodegradation and propose future research prospects.

Mechanistic insights into the environmental fate of tetracycline affected by ferrihydrite: Adsorption versus degradation

Tetracycline (TC), a widely used antibiotic, is frequently detected in soil environments. It has a strong tendency to form complexes with metals, including iron (oxyhydr)oxide. In this study, ferrihydrite (Fh), a representative iron oxyhydroxide of the iron plaques on the surface of plant roots, was chosen to study the contributions of iron oxyhydroxide on the environmental fate of TC in the rhizosphere environment. Fh adsorption isotherm of TC showed good fitting to the Freundlich model, and the Fh adsorption capacity of TC was found much larger than the other iron oxyhydroxide of high crystallinity. The adsorption mechanisms mainly included electrostatic interaction, H-bonding, and complexation. The results of FTIR and XPS spectra revealed that tricarbonylamide, dimethylamino, and the hydroxyl in the B ring of TC were mainly responsible for the complexation with Fh surface hydroxyl groups. Furthermore, it should be noted that the adsorbed TC on Fh could be degraded and the degradation kinetics of TC better fitted to the pseudo-second-order model. Fh could promote electron transfer from TC to Fe(III) on the Fh surface, which led to the degradation of TC and the formation of Fe(II) ions. The degradation pathways of TC mainly involved three reactions: hydroxylation, dealkylation, and deamination. This study provides mechanistic insights on TC-Fh interaction, which improves the understanding of TC fate in the rhizosphere environment.

Perylene diimide supermolecule (PDI) as a novel and highly efficient cocatalyst for photocatalytic degradation of tetracycline in water: A case study of PDI decorated graphitic carbon nitride/bismuth tungstate composite

Employing perylene diimide supermolecule (PDI) as metal-free cocatalyst, a novel PDI/g-C₃N₄/Bi₂WO₆ (PCB) photocatalyst was constructed for the effective degradation of antibiotics. Both the photocatalytic activity and photostability of g-C₃N₄/Bi₂WO₆ (gCB) were further improved after loading PDI. Under simulated sunlight illumination, the apparent rate constant of tetracycline (TC) degradation by PCB reached 2.6 times that of gCB. The photocatalytic activity of PCB still kept over 80% after 4 cycle experiments, while gCB only remained around 21%. The superior activity of PCB was ascribed to the synergism between the extended visible light absorption range through the participation of PDI cocatalyst and facilitated gCB-to-PDI photoelectron transfer. TC would finally be transformed into non-toxic ring opening products and mineralized. This work demonstrated that PDI was an excellent metal-free cocatalyst and exhibited great potential to boost the activity of photocatalysts.

Insight into the role of binding interaction in the transformation of tetracycline and toxicity distribution

The transformation of free state organic micro-pollutants (MPs) has been widely studied; however, few studies have focused on mixed and bound states MPs, even though numerous ionizable organic MPs process a strong tendency to combine with dissolved organic matters in aquatic environments. This study systemically investigated the distribution and toxicity assessment of tetracycline (TET) transformation products in free, mixed and bound states during UV, UV/H₂O₂, UV/PS and CNTs/PS processes. A total of 33 major transformation products were identified by UPLC-Q-TOF-MSMS analysis, combining the double bond equivalence and aromaticity index calculations. The binding interaction would weaken the attack on the dimethylamino (-N(CH₃)₂) group and induce the direct destruction of rings A and B of TET through the analysis of 2D Kernel Density changes and density functional theory (DFT) calculations. Toxicity assessment and statistics revealed that the intermediate products with medium molecular weight (230≤ m/z ≤ 380) exhibited higher toxicity, which was closely related to the number of the rings in molecular structures (followed as 2»3 > 1≈4). A predicted toxicity accumulation model (PTAM) was established to evaluate the overall toxicity changes during various oxidation processes. This finding provides new insight into the fate of bound MPs during various oxidation processes in the natural water matrix.

Tetracyclines in the environment: An overview on the occurrence, fate, toxicity, detection, removal methods, and sludge management

Tetracyclines (TCs) are a group of broad-spectrum antibiotics having vast human, veterinary, and aquaculture applications. The continuous release of TCs residues into the environment and the inadequate removal through the conventional treatment systems result in its prevalent occurrence in soil, surface water, groundwater, and even in drinking water. As aqueous TCs contamination is the tip of the iceberg, and TCs possess good sorption capacity towards soil, sediments, sludge, and manure, it is insufficient to rely on the sorptive removal in the conventional water treatment plants. The severity of the TCs contamination is evident from the emergence of TCs resistance in a wide variety of microorganisms. This paper reviews the recent research on the TCs occurrence in the environmental matrices, fate in natural systems, toxic effects, and the removal methods. The high performance liquid chromatography (HPLC) determination of TCs in environmental samples and the associated technology developments are analyzed. The benefits and limitations of biochemical and physicochemical removal processes are also discussed. This work draws attention to the inevitability of proper TC sludge management. This paper also gives insight into the limitations of TCs related research and the future scope of research in environmental contamination by TCs residues.

Stable Fe3O4 submicrospheres with SiO2 coating for heterogeneous Fenton-like reaction at alkaline condition

In the traditional Fenton process, the efficient generation of hydroxyl radical (HO) strongly relies on an acidic circumstance and the iron ions would precipitate and form large amounts of hazardous iron-containing sludge at alkaline pH. To realize stable heterogeneous Fenton-like catalytic degradation at alkaline condition, Fe₃O₄ submicrospheres with SiO₂ coating were successfully synthesized by using water glass as the silica sources via a facile ultrasound assisted method. The as-obtained Fe₃O₄@SiO₂ spheres were further used as catalysts for the Fenton-like degradation of tetracycline hydrochloride (TC). The Fe₃O₄@SiO₂ submicrospheres exhibited superior catalytic activity in higher pH environment (pH value = 11), and the degradation efficiency toward TC was ca. 80% after ten successive runs. The kinetics for the catalytic degradation of TC were agreed well with the second-order kinetic model. The reaction rate constant (k) over the Fe₃O₄@SiO₂ submicrospheres at a pH value of 11 was 7.69 times greater than that at a pH value of 3. Reactive species scavenging experiments revealed that HO and superoxide radical (O₂^- / HO₂^-) played a dominant role during the Fenton-like degradation of TC at pH 3 and pH 11, respectively. Possible Fenton-like degradation pathways of TC were proposed through the identification of intermediates using the high performance liquid chromatography coupled with mass spectrometry (HPLC-MS), which involved cleavage of methyl groups, N-dimethyl group, and hydroxy groups, ring-opening reaction, etc. The degradation efficiency of TC was close to 91.5% and total organic carbon (TOC) in solution was eliminated by about 41.4% at the optimized conditions. In a word, with the unique acidic surface properties and abundant Si-OH bonds, the Fe₃O₄@SiO₂ submicrospheres exhibited well dispersion, good catalytic activity, strong alkali resistance and excellent recyclability in an ultrasonic-Fenton-like system.

Removal of Tetracycline Oxidation Products in the Nanofiltration Process

The possibility of removing tetracycline (TRC) from water in an integrated advanced oxidation and membrane filtration process was investigated. Ozonation and UV/H2O2 photooxidation were applied for the destruction of TRC. Six oxidation products (OPs) retaining the structural core of TRC have been identified. One new TRC oxidation product, not reported so far in the literature, was identified—ethyl 4-ethoxybenzoate. All identified OPs were effectively retained on the membrane in the nanofiltration process. However, chemical oxygen demand (COD) measurements of the filtrates showed that in the case of UV/H2O2 oxidation, the OPs passed through the membrane into the filtrate. Various water matrices were used in the research, including the river water untreated and after ozone treatment. It has been shown that organic matter present in surface water can improve pharmaceutical retention, although it contributes to significant membrane fouling. Pre-ozonation of the river water reduced the membrane fouling. The XPS analysis was used to show ozone and H2O2 influence on the top polymer layer of the membrane. It was shown that the oxidants can damage the amide bond of the polyamide.

Occurrence, fate, and risk assessment of typical tetracycline antibiotics in the aquatic environment: A review

Tetracyclines (TCs), used as human and veterinary medicines, are the most widely used antibiotics. More than 75% of TCs are excreted in an active form and released into the environment through human and animal urine and feces, causing adverse effects on the ecological system and human health. Few articles review the environmental occurrence and behaviors of TCs, as well as their risks and toxicities. Here, we comprehensively summarized the recent advances on the following important issues: (1) Environmental occurrence of TCs. TCs are used globally and their occurrence in the aquatic environment has been documented, including surface water, groundwater, drinking water, wastewater, sediment, and sludge. (2) Environmental behaviors of TCs, particularly the fate of TCs in wastewater treatment plants (WWTPs). Most WWTPs cannot effectively remove TCs from wastewater, so alternative methods for efficient removal of TCs need to be developed. The latest degradation methods of TCs are summarized, including adsorption, photocatalytic, photochemical and electrochemical, and biological degradations. (3) Toxicities and possible risks of TCs. The toxicological data of TCs indicate that several TCs are more toxic to algae than fish and daphnia. Risk assessments based on individual compound exposure indicate that the risks arising from the current concentrations of TCs in the aquatic environment cannot be ignored.

In-situ self-assembly construction of hollow tubular g-C3N4 isotype heterojunction for enhanced visible-light photocatalysis: Experiments and theories

A highly reactive hollow tubular g-C₃N₄ isotype heterojunction (SCN-CN) was designed to enhance visible light absorption and manipulate the directed transfer of electrons and holes. The results of UV-vis DRS, XPS valence band and DFT theoretical calculations indicated S doping increases the visible-light absorption capacity and changed the ba nd gap structure of g-C₃N₄ (CN), resulting in the transfer of electrons from the CN to the SCN and holes from the SCN to the CN under visible light. In addition, the tubular structure of the SCN-CN facilitated the transfer of electrons in the longitudinal direction, which reduced charge carrier recombination. Furthermore, the optical properties, electronic structure, and electron transfer of SCN-CN were also studied by experiments and theoretical calculations. The antibiotic tetracycline hydrochloride (TCH) and dye Rhodamine B (RHB) were subjected to evaluate the photocatalytic performance of SCN-CN. The scavenger tests and ESR data showed that the h⁺, ·O₂^- and ·OH worked together in the photocatalytic process. Moreover, the photocatalytic degradation pathway was analyzed by LC-MS. This study synthesized a hollow tubular CN isotype heterojunction with high visible-light photocatalytic performance and provided a theoretical basis for CN isotype heterojunction.

Fe3O4 accelerates tetracycline degradation during anaerobic digestion: Synergistic role of adsorption and microbial metabolism

Antibiotics contaminants, for example, tetracycline (TC) in the environment have attracted extensive attention around the world, and appropriate treatments for such contaminants are urgently required. In this study, five groups of anaerobic reactors supplemented with different amounts of Fe₃O₄ were operated periodically to investigate their performance on TC removal. The results showed that Fe₃O₄ effectively promoted TC removal. Compared with the control reactor, the TC removal efficiency was increased by 7.3% when co-digested with glucose, and increased by 40.4% when mono TC was digested in reactors with 5.0 g/L Fe₃O₄. Further analysis indicated that the probable mechanism of Fe₃O₄ promoting TC removal was through TC being adsorbed from the liquid onto Fe₃O₄, making TC more available for microbes to be biodegraded. Microbial community analysis indicated that the bacteria (Klebsiella, Pseudomonas, and Escherichia) related to TC removal were enriched, which meant more pathways for TC removal were available following the addition of Fe₃O₄. In addition, in the Fe₃O₄-supplemented reactors, syntrophic metabolism (between Desulfovibrio and Methanobacterium, Azonexus and Methanobacterium) were possibly established, which played an important role in improving TC removal and CH₄ production. The electron transport system data further confirmed these results. The functional gene classification for Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis demonstrated that the dominant functions enhanced by Fe₃O₄ supplementation was microbial metabolic activities.

Isolation of oxytetracycline-degrading bacteria and its application in improving the removal performance of aerobic granular sludge

Aerobic granular sludge (AGS) is a type of biofilm with good sedimentation and density, high biomass, high organic load tolerance and toxicity resistance. Oxytetracycline (OTC) is an antibiotic widely used in livestock and aquaculture, and its low absorption and high residue bring many risks and harms to the ecological environment. In this study, an OTC-degrading strain TJ3 was isolated from AGS and identified as Pandoraea sp. The biodegradation characteristics of OTC by strain TJ3 under different environmental conditions were also investigated. The results showed that the optimal initial pH value and temperature for the culture strain were 6.0 and 30 °C, respectively. At an inoculation dose of 6% (v/v), the removal rate of OTC by strain TJ3 was remarkable (59.4%). Furthermore, when the sodium acetate was present as an additional substrate, the biomass and the OTC removal rate of strain TJ3 were improved. The biodegradability of strain TJ3 to OTC was proved by LC-QTOF/MS, and two possible biotransformation products, i.e. m/z 416 and 219, were identified. In the bioaugmentation experiments of AGS by strain TJ3, the average OTC removal rate was 92.89% after the stable operation of bioreactor. The chemical oxygen demand (COD), ammonium nitrogen (NH₄⁺-N) and total phosphorus (TP) were efficiently removed. The microbial community structure had significantly changed at the genus level, and the relative abundance of Zoogloea, Pandoraea, Cloacibacterium and Desulfovibrio increased evidently. These results implied that the OTC removal performance and the structural stability of AGS were improved. In this study, Pandoraea sp. TJ3 was applied to removal OTC for the first time, and results showed that Pandoraea sp. TJ3 may be a new auxiliary bacterial resource for the biodegradation of OTC and a potential candidate in the treatment of antibiotic wastewater.

Photolysis mechanisms of tetracycline under UV irradiation in simulated aquatic environment surrounding limestone

As the most typical geological environment, limestone landforms are widespreading in the world and affect the waters that flow around them, which may also change the fate of organic contaminants in these waters. In this study, aquatic environment surrounding limestone was simulated with calcium carbonate, and the photolysis of tetracycline was evaluated under UV irradiation (30 μW/cm²). More tetracycline (up to 98%) was removed in 4 h in the presence of calcium carbonate while only 50% of tetracycline was eliminated in control experiment. The removal of tetracycline was greatly enhanced due to the major roles of alkaline pH and minor roles of Ca²⁺ and HCO₃^-/CO₃^2-. In alkaline pH, tetracycline existed as TCs^- with higher electronic density in the ring structures, which was more easily attacked by OH. Besides, it could also change the bond orbital energy to facilitate tetracycline absorbing more photon. Moreover, alkaline pH was beneficial to generate more OH and thus promote the indirect photolysis. In addition, alkaline pH also changed the degradation path of tetracycline and rapidly convert tetracycline to the byproducts with m/z 457 via hydroxylation and hydrogen abstraction. This work provides not only better understanding about the fate of tetracycline in aquatic environments but also new insights into the treatment of antibiotic-contaminated water.

Bacitracin-assisted synthesis of spherical BiVO4 nanoparticles with C doping for remarkable photocatalytic performance under visible light

The spherical BiVO₄ nanoparticles with C doping were fabricated by using bacitracin as a biological template through hydrothermal-calcination method. And the prepared photocatalysts have excellent photocatalytic performance under visible light.

High temperatures can effectively degrade residual tetracyclines in chicken manure through composting

Tetracyclines (TCs) residues in livestock manure are the main origin of environmental tetracyclines contamination and have serious environmental and health risks. This work aimed to examine the effect of temperature on the degradation patterns of TCs antibiotics. Tetracycline (TC), doxycycline (DC), oxytetracycline (OTC) and chlortetracycline (CTC) were all degraded much more quickly in sterilized double distilled H₂O (ddH₂O) at higher temperatures and lost antibacterial activity after being incubated at 70 °C for 72 h. High pH value enhanced the degradation process of TCs solutions. Degradation products of the TCs were identified with LC/MS. The TCs from simulated composting with sterilized chicken manure and nonsterilized manure all showed temperature-dependent thermal degradation. The degradation pattern fitted the availability-adjusted loss model well. The fitted equations showed that the half-lifes of degradation of the TCs were 1.66-7.62 h at 70 °C, 3.29-21.39 h at 60 °C and 9.25-57.19 h at 50 °C. Compared with those of nonsterilized manures, we concluded that high temperature can effectively degrade the residual TCs in chicken manure by thermal degradation during high temperature composting. Temperatures that are elevated moderately, for example, up to 70 °C, during the composting process can make the degradation process more effective and rapid.

Removal of Tetracycline by Hydrous Ferric Oxide: Adsorption Kinetics, Isotherms, and Mechanism

The removal of tetracycline (TC) from solution is an important environmental issue. Here we prepared an adsorbent hydrous ferric oxide (HFO) by adjusting a FeCl₃·6H₂O solution to neutral pH. HFO was characterized by a surface area analyzer, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), and was used to remove TC from solution. The influence of pH, solid-to-liquid ratio, ionic type, and strength on TC removal was investigated. Adsorption kinetics and isotherms were also determined. HFO after adsorption of TC was analyzed by FTIR and XPS to investigate the adsorption mechanism. The results showed that the adsorption of TC increased from 88.3% to 95% with increasing pH (3.0-7.0) and then decreased. K⁺ ions had little effect on TC adsorption by HFO. However, Ca²⁺ and Mg²⁺ reduced the adsorption of TC on HFO. When the concentrations of Ca²⁺ and Mg²⁺ were increased, the inhibitory effect was more obvious. Pseudo-second-order kinetics and the Langmuir model fitted the adsorption process well. The maximum adsorption capacity of TC on HFO reached 99.49 mg·g^-1. The adsorption process was spontaneous, endothermic, and increasingly disordered. Combination analysis with FTIR and XPS showed that the mechanism between TC and HFO involved electrostatic interactions, hydrogen interactions, and complexation. Therefore, the environmental behavior of TC could be affected by HFO.

Photochemical transformations of tetracycline antibiotics influenced by natural colloidal particles: Kinetics, factor effects and mechanisms

Natural colloidal particles (NCPs), ubiquitous in seawater and important carriers for most environmental contaminants, could affect the transportation and transformation of contaminants in the aquatic environment. This research focused on the photochemical transformation behaviors and mechanisms of tetracycline (TC) and oxytetracycline (OTC) in the presence of NCPs from the surface water in the intertidal zones of Yellow River Delta. Results showed that TCs could undergo the direct and indirect photochemical transformations, and were well fitted pseudo-first-order degradation kinetics. Compared with pure water, the photochemical transformations of TCs were enhanced by 1-3 times by NCPs. The photochemical transformations of TCs were accelerated with increasing pH (2.0-11.0) in pure water, but the presence of NCPs slightly depressed the effect of pH. At the low salinity, NCPs accelerated the photochemical transformations, however, there was no influence at the high salinity. Under light irradiation, TC mainly underwent indirect photolysis through the excited state colloidal organic matter (³COM*), while direct photolysis mainly occurred for OTC. NCPs affected both pathways and yields of TC transformations, but they only affected intermediates yields of OTC. This paper has revealed that NCPs play a significant role in photochemical transformations of tetracycline antibiotics.

Preparation of Ag-AgVO3/g-C3N4 composite photo-catalyst and degradation characteristics of antibiotics

The degradation of tetracycline by silver vanadate (AgVO₃), graphite-like carbon nitride (g-C₃N₄) and their composites was studied by visible light photocatalysis. Their structures and morphologies were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Their degradation intermediates were analyzed by GC-MS. Nanorod silver vanadate was synthesized by hydrothermal method. The results show that the gap between nanorods is reduced by adding spinning carbon nitride, and the photocatalytic performance of the composite is stronger than that of single material. The reaction rate constants of Ag-AgVO₃/g-C₃N₄ composites were 0.0298 min^-1, 2.4 and 2.0 times that of g-C₃N₄ (K=0.0125 min-1) and AgVO₃ (K=0.0152 min-1), respectively. At 120 minutes, the degradation rate of the composites reached 83.6%. The degradation of tetracycline was confirmed by GC-MS, and a possible degradation process was proposed.

Simultaneous removal of tetracycline and disinfection by a flow-through electro-peroxone process for reclamation from municipal secondary effluent

Pharmaceutical and personal care products as one of the micropollutants and bacteria in secondary effluent restrict the water reuse from municipal secondary effluent. Electro-peroxone (EP) process where H₂O₂ is generated in-situ by electrolysis is an emerging advanced oxidation process and an improvement of traditional peroxone method (O₃/H₂O₂). In this work, a flow-through EP process was compared with ozonation and electrolysis for simultaneous disinfection and degradation of tetracycline (TC). The disinfection effect by EP was higher than the sum of standalone ozone and electrolysis and the coupling coefficient of ozonation and electrolysis in EP process was 1.2. The flow-through EP system presented similar efficiency for separately and simultaneously treating E. coli and TC. For the actual secondary effluent treatment, trihalomethanes, haloacetonitrile and halonitromethanes, the main disinfection by-products, were much lower than the WHO's thresholds for drinking water. TOC and COD removal was 44% and 65%, respectively, at flow rate of 35 mL/min. BOD₅, bacteria, pH and other parameters in the effluent could satisfy the recreational landscape water quality standard, and the required energy consumption was 0.47 kW h/m³ at the flow rate 35 mL/min. Most of the degradation products were small-molecule organic acids, and possible degradation pathway of TC was suggested.

Research on the sustainable efficacy of g-MoS2 decorated biochar nanocomposites for removing tetracycline hydrochloride from antibiotic-polluted aqueous solution

Antibiotic concentrations in surface waters far exceed the pollution limit due to the abuse of pharmaceuticals, resulting in an urgent need for an approach with potential efficiency, sustainability and eco-friendliness to remove antibiotic pollutants. A novel biochar-based nanomaterial was synthesized by hydrothermal synthesis and was investigated for its removal potential for tetracycline hydrochloride (TC) from both artificial and real wastewater. The associative facilitation between biochar and g-MoS₂ nanosheets was proposed, revealing the favorable surface structures and adsorption properties of the composite. The related adsorption kinetics, isotherms and thermodynamics were studied by several models with adsorption experimental data, turning out that biochar decorated by g-MoS₂ exhibited optimum TC removal with adsorption capacity up to 249.45 mg/g at 298 K. The adsorption behavior of TC molecules on g-MoS₂-BC can be interpreted well by three-step process, and it is dominated by several mechanisms containing pore-filling, electrostatic force, hydrogen bond and π-π interaction. In addition, the cost-effective g-MoS₂-BC nanocomposites demonstrated excellent adsorption and recycling performance in TC-contaminated river water, which might provide the underlying insights needed to guide the design of promising approach for contaminant removal on a large scale in practical application.