Past and future cadmium emissions from municipal solid-waste incinerators in Japan for the assessment of cadmium control policy

Sample Preparation and Analytical Techniques in the Determination of Trace Elements in Food: A Review

Every human being needs around 20 essential elements to maintain proper physiological processes. However, trace elements are classified as beneficial, essential, or toxic for living organisms. Some trace elements are considered essential elements for the human body in adequate quantities (dietary reference intakes, DRIs), while others have undetermined biological functions and are considered undesirable substances or contaminants. Pollution with trace elements is becoming a great concern since they can affect biological functions or accumulate in organs, causing adverse effects and illnesses such as cancer. These pollutants are being discarded in our soils, waters, and the food supply chain due to several anthropogenic factors. This review mainly aims to provide a clear overview of the commonly used methods and techniques in the trace element analysis of food from sample preparations, namely, ashing techniques, separation/extraction methods, and analytical techniques. Ashing is the first step in trace element analysis. Dry ashing or wet digestion using strong acids at high pressure in closed vessels are used to eliminate the organic matter. Separation and pre-concentration of elements is usually needed before proceeding with the analytical techniques to eliminate the interferences and ameliorate the detection limits.

Mini-review of waste-to-energy related air pollution and their limit value regulations in an international comparison

The concept of circular economy supports mitigation of climate change and other environmental pressures to the planet. Circulating materials in anthropogenic processes come with the risk of accumulating hazardous substances and compounds. In this concept, waste incineration or waste-to-energy (WtE) is a necessary technology to remove these compounds from the life cycle. In this mini-review, contaminants of major importance in the flue gas from waste incineration plants and their environmental impact are discussed. Air pollution of WtE is often seen as the most relevant environmental impact of this treatment option. The emission values parameter set for different countries is presented and compared. The most stringent legally set of emission values could be found in parts of Europe and South Korea. Japan also permits similar strict values when authorising individual incineration plants. In North America, the values are partially less strict as the best available technologies in Europe suggest being possible. Emerging economies, such as India and China, have shown efforts to improve their environmental protection standards but still have room to improve. This could be set in relation to other industrial emitting processes and therefore could be used to assess the relevance of this industry sector to the national emission inventories.

Enhanced cadmium immobilization by sulfate-mediated microbial zero-valent iron corrosion

A biotic iron (Fe⁰) treatment system combined with mixed microorganisms was applied to remediate cadmium (Cd)-contaminated groundwater under the intervention of sulfate. Due to hydrogenotrophic desulfuration effect, severe iron corrosion was observed in this microbe-collaborative Fe⁰ system according to surface morphology analysis as lots of secondary minerals (e.g. magnetite, green rust and lepidocrocite) were generated, which was essential for Cd(II) adsorption and immobilization. The sulfate-mediated biotic Fe⁰ system thereafter achieved a significantly enhanced Cd(II) removal efficiency of 86.1%, over 3.3 times than that in the abiotic Fe⁰ system. Increasing initial sulfate concentration could improve the removal of cadmium, which further proved that hydrogenotrophic desulfuration played a key role for enhanced Cd removal. According to the experimental results and current reports, the mechanism of Cd(II) removal was revealed into three pathways including adsorption to secondary iron minerals, co-precipitation with iron (hydr)oxides and formation of cadmium sulfide precipitation. Increasing Fe⁰ dosages showed positive correlation to Cd(II) removal and neutral pH was preferred to sulfate-mediated biotic Fe⁰ corrosion. These results indicated that sulfate-mediated biotic Fe⁰ corrosion could greatly relieve the limitation of Fe⁰ in Cd(II) immobilization, which could be a promising method to eliminate Cd(II) pollution from groundwater.

Predictors of erythrocyte cadmium levels in 454 adults in Florence, Italy

BACKGROUND

Cadmium bioaccumulates in the body and causes several adverse health effects. Understanding the primary sources of exposure is critical in order to implement effective prevention measures.

METHODS

We included 454 adults enrolled in the Florence cohort of the European Prospective Investigation into Cancer and Nutrition (EPIC) during 1992-98. At enrolment, information was collected on demographics, lifestyle and dietary habits using validated questionnaires; anthropometric measures were taken; and a blood sample was collected from each study participant. Information on the residential and occupational history prior to enrolment was reconstructed by phone interviews. Cadmium levels were measured in erythrocytes using inductively coupled plasma-mass spectrometry. We used multiple linear regression models to investigate the main determinants of cadmium levels.

RESULTS

Median erythrocyte cadmium levels were 0.66 μg/L (inter-quartile range 0.43-1.07 μg/L). Cadmium levels were lowest in never smokers (0.50 μg/L) and highest in current smokers (1.38 μg/L). Smoking status and the number of pack-years were the strongest predictors of cadmium levels in multivariable analysis, together with erythrocyte levels of lead, and biking to work, while an inverse association emerged with consumption of red meat and dairy products and physical activity levels. Cadmium levels were higher among women than men (0.66 vs. 0.58 μg/L), and, among the former, positively associated with late menopause, nulliparity, and use of hormones for menopause. The predictors included in the multivariable model explained >40% of the variability in erythrocyte cadmium levels.

CONCLUSIONS

Smoking was the most important determinant of erythrocyte cadmium levels, which were also affected by dietary habits, physical activity levels, biking, and (among women) hormone-related variables. Our results are important to inform public health actions aimed at reducing the impact of potentially modifiable sources of exposure to cadmium.

Cadmium stabilization via silicates formation: Efficiency, reaction routes and leaching behavior of products

Stabilizing cadmium by incorporating it into crystalline products is an effective approach to detoxify cadmium-containing wastes. In this study, two Si-rich matrices in amorphous and crystalline forms (i.e., silica fume and α-quartz, respectively) were employed to incorporate Cd. The processing parameters, namely the type of Si-rich matrix, Cd/Si molar ratio (Г) and sintering temperature, were thoroughly investigated using quantitative X-ray diffraction technique. Cd incorporation was more energetically favored when silica fume was used rather than when α-quartz was used because of the lower Gibbs free energy of formation for silica fume. The sintering temperature and Г values substantially affected the formation of three cadmium silicates, namely monoclinic CdSiO₃, orthorhombic Cd₂SiO₄, and tetragonal Cd₃SiO₅. CdSiO₃ formed only in Г = 1.0 systems. Cd₂SiO₄ was dominant in all reactive systems. In Г = 3.0 systems, Cd₃SiO₅ rather than Cd₂SiO₄ was the predominant Cd-hosting product at temperatures above 850 °C. Leaching test results demonstrated that CdSiO₃ possessed the highest acid resistance among the cadmium silicates. The leachability of Cd₂SiO₄ was very similar to that of Cd₃SiO₅. CdSiO₃ preferred incongruent dissolution, whereas Cd₂SiO₄ and Cd₃SiO₅ favored near-congruent dissolution. This study delineated the feasibility of cadmium incorporation by Si-rich matrices, identifying a promising approach for cadmium detoxification.

PM2.5 particulates and metallic elements (Ni, Cu, Zn, Cd and Pb) study in a mixed area of summer season in Shalu, Taiwan

PM_2.5 has become an important environmental issue in Taiwan during the past few years. Moreover, electricity increased significantly during the summertime and TTPP generated by coal burning base is the main electricity provider in central Taiwan. Therefore, summer season has become the main research target in this study. The ambient air concentrations of particulate matter PM_2.5 and PM₁₀ collected by using VAPS at a mixed characteristic sampling site were studied in central Taiwan. The results indicated that the average daytime PM_2.5 and PM₁₀ particulate concentrations were occurred in May and they were 44.75 and 57.77 µg/m³ in this study. The results also indicated that the average nighttime PM_2.5 and PM₁₀ particulate concentrations were occurred in June and they were 38.19 and 45.79 µg/m³ in this study. The average PM_2.5/PM₁₀ ratios were 0.7 for daytime, nighttime and 24-h sampling periods in the summer for this study. This value was ranked as the lowest ratios when compared to the other seasons in previous study. Noteworthy, the results further indicated that the metallic element Pb has the mean highest concentrations for 24-h, daytime and nighttime sampling periods when compared to those of the other metallic elements (Ni, Cu, Zn and Cd). The average mean highest metallic Pb concentrations in PM10 were 110.7, 203.0 and 207.2 ng/m³ for 24-h, daytime and nighttime sampling periods in this study. And there were 59.53, 105.2 and 106.6 ng/m³ for Pb in PM2.5 for 24-h, daytime and nighttime sampling periods, respectively. Moreover, the results further indicated that mean metallic element Pb concentrations on PM_2.5 and PM₁₀ were all higher than those of the other elements for 24 h, day and nighttime.

Exploring social dimensions of municipal solid waste management around the globe - A systematic literature review

Currently, municipal solid waste (MSW) is experiencing a massive increase in both the amount and composition throughout the world. Effective and efficient MSW management has been widely accepted as an emergent factor for future social development, which requires not only technical innovation, but also the involvement of all stakeholders as well as social, economic, and psychological components. On account of this reality, there is an urgent need for research related to the social dimensions of MSW management. In this paper, a systematic literature review was carried out to characterize and critically evaluate the published literature on the social dimensions of MSW management from 1980 to 2014 in terms of vulnerability, public participation, public attitude and behavior, and policy. A keyword search was first performed by using the Institute for Scientific Information (ISI) Web of Science, which retrieves 1843 documents. After removing the papers that were not closely related to the topic, 200 articles were retained for an in-depth review. In each category, major research issues and observations were summarized, and important insights were obtained. Besides compiling a related list of key references, the analysis results indicate that the global distribution of social dimensions reports on MSW management is inequitable and the research on the social dimensions of MSW management is insufficient, which may attract increased research interest and attention.

Substance flow analysis and assessment of environmental exposure potential for triclosan in mainland China

Triclosan (TCS) is a widely-used antimicrobial agent in many consumer products around the world, and China is a major producer and consumer of TCS. In this study substance flow analysis (SFA) was used to construct a static model of anthropogenic TCS metabolism in China in 2008. The systematic SFA results were used to determine possible exposure pathways and trends in environmental exposure potential through different pathways. TCS discharged in wastewater mainly flowed into surface water sediment, ocean, and soil, where it accumulates in aquatic and agricultural products that may pose a higher risk to human health than brief exposure during consumption. Only 22% of TCS discharged was removed in the built environment with the remainder discharged into the natural environment, indicating that anthropogenic TCS metabolism in China is unsustainable. Per capita TCS consumption increased 209% from 2003 to 2012, resulting in increased discharge and accumulation in the environment. If current trends continue, it will increase to 713 mg capita(-1) yr(-1) in 2015 and 957 mg capita(-1) yr(-1) in 2020. Accordingly, annual environmental exposure potential will increase from 388 mg capita(-1) in 2008 to 557 mg capita(-1) in 2015 and 747 mg capita(-1) in 2020, indicating an increasing trend of exposure to environmental TCS. Results of Pearson correlation analysis suggested that feasible countermeasures to reduce environmental exposure potential for triclosan would include encouraging the development of small cities, raising awareness of health risks, nurturing environmentally-friendly consumer values, and improving the environmental performance of TCS-containing products.