Inactivation performance and mechanism of Escherichia coli in aqueous system exposed to iron oxide loaded graphene nanocomposites

Graphene-based metal/metal oxide nanocomposites as potential antibacterial agents: a mini-review

Antimicrobial resistance (AMR) is a rising issue worldwide, which is increasing prolonged illness and mortality rates in the population. Similarly, bacteria have generated multidrug resistance (MDR) by developing various mechanisms to cope with existing antibiotics and therefore, there is a need to develop new antibacterial and antimicrobial agents. Biocompatible nanomaterials like graphene and its derivatives, graphene oxide (GO), and reduced graphene oxide (rGO) loaded with metal/metal oxide nanoparticles have been explored as potential antibacterial agents. It is observed that nanocomposites of GO/rGO and metal/metal oxide nanoparticles can result in the synthesis of less toxic, more stable, controlled size, uniformly distributed, and cost-effective nanomaterials compared to pure metal nanoparticles. Antibacterial studies of these nanocomposites show their considerable potential as antibacterial and antimicrobial agents, however, issues like the mechanism of antimicrobial action and their cytotoxicity need to be explored in detail. This review highlights a comparative analysis of graphene-based metal and metal oxide nanoparticles as potential antibacterial agents against AMR and MDR.

Construction of Graphene@Ag-MLF composite structure SERS platform and its differentiating performance for different foodborne bacterial spores

A new surface-enhanced Raman spectroscopy (SERS) biosensor of Graphene@Ag-MLF composite structure has been fabricated by loading AgNPs on graphene films. The response of the biosensor is  based on plasmonic sensing. The results showed that the enhancement factor of three different spores reached 107 based on the Graphene@Ag-MLF substrate. In addition, the SERS performance was stable, with good reproducibility (RSD<3%). Multivariate statistical analysis and chemometrics were used to distinguish different spores. The accumulated variance contribution rate was up to 96.35% for the top three PCs, while HCA results revealed that the spectra were differentiated completely. Based on optimal principal components, chemometrics of KNN and LS-SVM were applied to construct a model for rapid qualitative identification of different spores, of which the prediction set and training set of LS-SVM achieved 100%. Finally, based on the Graphene@Ag-MLF substrate, the LOD of three different spores was lower than 102 CFU/mL. Hence, this novel Graphene@Ag-MLF SERS substrate sensor was rapid, sensitive, and stable in detecting spores, providing strong technical support for the application of SERS technology in food safety.

Two-dimensional-Ti3C2 magnetic nanocomposite for targeted cancer chemotherapy

Introduction: Cervical cancer is the leading cause of cancer-related death in women, so novel therapeutic approaches are needed to improve the effectiveness of current therapies or extend their activity. In recent decades, graphene analogs, such as Mxene, an emerging class of two-dimensional (2D) graphene analogs, have been drawing considerable attention based on their intrinsic physicochemical properties and performance as potential candidates for tumor therapy, particularly for therapeutic purposes. Here we explored the targeted drug delivery in cervical cancer in in vivo model. Mxene-based nanocarriers are not able to be precisely controlled in cancer treatment. Method: To solve this problem, the titanium carbide-magnetic core-shell nanocarrier (Ti₃C₂-Fe₃O₄@SiO₂-FA) is also developed to provide synergetic anticancer with magnetic controlling ability along with pH-responsive drug release. A xenograft model of the cervix was used to investigate the effects of Cisplatin alone, or in combination with Ti₃C₂@FA and Ti₃C₂@ Fe₃O₄@SiO₂-FA, on tumor growth following histological staining for evaluation of necrosis. Result and Discussion: A significant tumor-growth suppression effect is shown when the Ti₃C₂-Fe₃O₄@SiO₂-FA nanocarrier is magnetically controlled Cisplatin drug release. It reveals a synergistic therapeutic efficacy used in conjunction with pharmaceuticals (p < .001). According to the in vivo study, the Ti₃C₂@FA@Cisplatin nanocomposite exhibits less tumor growth than the drug alone or Ti₃C₂@FA@Cisplatin via increasing necrosis effect (p < .001). Through this study, Mxene nanosheets are expanded for biomedical applications, not only through the fabrication of biocompatible magnetic Mxene nanocomposite but also through the development of functionalization strategies that enable the magnetic Ti₃C₂ nanocomposite to load high levels of Cisplatin for cervical cancer treatment (242.5%). Hence, Ti₃C₂-Fe₃O₄@SiO₂-FA nanocarriers would be promising candidates to improve cancer treatment efficiency.

Combinatorial effects of non-thermal plasma oxidation processes and photocatalytic activity on the inactivation of bacteria and degradation of toxic compounds in wastewater

The simultaneous presence of hazardous chemicals and pathogenic microorganisms in wastewater is tremendously endangering the environment and human health. Therefore, developing a mitigation strategy for adequately degrading toxic compounds and inactivating/killing microorganisms is urgently needed to protect ecosystems. In this paper, the synergetic effects of the photocatalytic activity of TiO₂ and Cu–TiO₂ nanoparticles (NPs) and the oxidation processes of non-thermal atmospheric pressure plasma (NTAPP) were comprehensively investigated for both the inactivation/killing of common water contaminating bacteria (Escherichia coli (E. coli)) and the degradation of direct textile wastewater (DTW). The photocatalytic NPs were synthesized using the hydrothermal method and further characterized employing field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), ultraviolet-visible diffuse reflection spectroscopy (UV-Vis DRS) and photoluminescence (PL). Results revealed the predominant presence of the typical anatase phase for both the flower-like TiO₂ and the multipod-like Cu–TiO₂ structures. UV-Vis DRS and PL analyses showed that the addition of Cu dopants reduced the bandgap and increased oxygen defect vacancies of TiO₂. The inactivation of E. coli in suspension and degradation of DTW were then examined upon treating the aqueous media with various plasma alone and plasma/NPs conditions (Ar plasma, Ar + O₂ plasma and Ar + N₂ plasma, Ar plasma + TiO₂ NPs and Ar plasma + Cu–TiO₂ NPs). Primary and secondary excited species such as OH˙, O, H and N₂* generated in plasma during the processes were recognized by in situ optical emission spectrometry (OES) measurements. Several other spectroscopic analyses were further employed to quantify some reactive oxygen species (ROS) such as OH, H₂O₂ and O₃ generated during the processes. Moreover, the changes in the pH and electrical conductivity (EC) of the solutions were also assessed. The inactivation of bacteria was examined by the colony-forming unit (CFU) method after plating the treated suspensions on agar, and the degradation of organic compounds in DTW was further validated by measuring the total organic carbon (TOC) removal efficiency. All results collectively revealed that the combinatorial plasma-photocatalysis strategy involving Cu–TiO₂ NPs and argon plasma jet produced higher concentrations of ROS and proved to be a promising one-step wastewater treatment effectively killing microorganisms and degrading toxic organic compounds.

Contamination of water is a serious issue across the world. The proposed plasma synergetic treat has great potential to treat contaminated water in an environmentally friendly way.

Nanopesticide Formulation from Pyraclostrobin and Graphene Oxide as a Nanocarrier and Application in Controlling Plant Fungal Pathogens

Efficient and environment-friendly nanopesticide delivery systems are critical for the sustainable development of agriculture. In this study, a graphene oxide nanocomposite was developed for pesticide delivery and plant protection with pyraclostrobin as the model pesticide. First, graphene oxide-pyraclostrobin nanocomposite was prepared through fast adsorption of pyraclostrobin onto graphene oxide with a maximum loading of 87.04%. The as-prepared graphene oxide-pyraclostrobin nanocomposite exhibited high stability during two years of storage, suggesting its high potential in practical application. The graphene oxide-pyraclostrobin nanocomposite could achieve temperature (25 °C, 30 °C and 35 °C) and pH (5, 7 and 9) slow-release behavior, which overcomes the burst release of conventional pyraclostrobin formulation. Furthermore, graphene oxide-pyraclostrobin nanocomposite exhibited considerable antifungal activities against Fusarium graminearum and Sclerotinia sclerotiorum both in vitro and in vivo. The cotoxicity factor assay revealed that there was a synergistic interaction when graphene oxide and pyraclostrobin were combined at the ratio of 1:1 against the mycelial growth of Fusarium graminearum and Sclerotinia sclerotiorum with co-toxicity coefficient values exceeding 100 in vitro. The control efficacy of graphene oxide-pyraclostrobin nanocomposite was 71.35% and 62.32% against Fusarium graminearum and Sclerotinia sclerotiorum in greenhouse, respectively, which was higher than that of single graphene oxide and pyraclostrobin. In general, the present study provides a candidate nanoformulation for pathogenic fungal control in plants, and may also expand the application of graphene oxide materials in controlling plant fungal pathogens and sustainable agriculture.

Mixed-Matrix Membrane Fabrication for Water Treatment

In recent years, technology for the fabrication of mixed-matrix membranes has received significant research interest due to the widespread use of mixed-matrix membranes (MMMs) for various separation processes, as well as biomedical applications. MMMs possess a wide range of properties, including selectivity, good permeability of desired liquid or gas, antifouling behavior, and desired mechanical strength, which makes them preferable for research nowadays. However, these properties of MMMs are due to their tailored and designed structure, which is possible due to a fabrication process with controlled fabrication parameters and a choice of appropriate materials, such as a polymer matrix with dispersed nanoparticulates based on a typical application. Therefore, several conventional fabrication methods such as a phase-inversion process, interfacial polymerization, co-casting, coating, electrospinning, etc., have been implemented for MMM preparation, and there is a drive for continuous modification of advanced, easy, and economic MMM fabrication technology for industrial-, small-, and bulk-scale production. This review focuses on different MMM fabrication processes and the importance of various parameter controls and membrane efficiency, as well as tackling membrane fouling with the use of nanomaterials in MMMs. Finally, future challenges and outlooks are highlighted.

Chromium and cerium co-doped magnetite/reduced graphene oxide nanocomposite as a potent antibacterial agent against S. aureus

The development of innovative antibacterial samples with high efficacy has received a great deal of interest. Herein, we synthesized magnetite modified by Cr and co-modified by Cr and Ce, along with their reduced graphene oxide (rGO)-based nanocomposites via facile hydrothermal and co-precipitation methods. The rGO-based samples showed proper magnetic behavior, high porosity, and vast specific surface area. The high specific surface area provided more adsorptive active sites with higher potentials for the decomposition of Staphylococcus aureus (S. aureus) cells. The antibacterial performance of the samples against S. aureus was evaluated at 50 and 100 μg mL^-1 through the colony-forming unit (CFU) method and the minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) values were subsequently determined. As per results, not only chromium cations could effectively damage the DNA of bacteria, but also the antibacterial efficacy was further enhanced by co-doping of cerium and the integration with rGO nanosheets. The antibacterial results were confirmed through the changes observed in the morphology and topology of the bacteria before and after the treatment using SEM and AFM analyses. Ultimately, the plausible S. aureus inactivation mechanism of the samples was disclosed.

Impact of bovine serum albumin - A protein corona on toxicity of ZnO NPs in environmental model systems of plant, bacteria, algae and crustaceans

Zinc oxide nanoparticles (ZnO NPs) are widely applied in industrial, household and medical areas that lead to its discharge and accumulation in ecosystem. Here, the toxic effect of ZnO NPs in presence and absence of bovine serum albumin (BSA) was analyzed. The difference in toxicity of bare ZnO and BSA interacted ZnO was studied with different environmental models. P. aeruginosa and S. aureus were used as model bacterial systems. Toxicity against bacteria was determined by employing plate count method. C. pyrenoidsa was used as algal system for evaluating toxicity and it was determined by chlorophyll estimation assay. Daphnia sp. was chosen as crustacean system model. A. cepa root cells were chosen as plant model. ZnO NPs increased the ROS formation, lipid peroxidation and oxidative stress and it reduced in the presence of BSA. The cytotoxicity, chromosomal aberrations and micronuclei (MN) index of A. cepa were increased after ZnO NPs treatment. Same time the toxic effect was decreased in case of BSA coated ZnO NPs. The NPs toxic potential on the organisms decreased in the order of P. aeruginosa (LC₅₀-0.092 mg/L) > S. aureus (LC₅₀-0.33 mg/L) > Daphnia sp (LC₅₀-0.35 mg/L) > C. pyrenoidosa (LC₅₀-8.17 mg/L). LC₅₀ in presence of BSA was determined to be 18.45, 26.24, 17.27 and 53.97 mg/L for P. aeruginosa, S. aureus, Daphnia sp and C. pyrenoidosa respectively. Therefore, the report suggests that BSA stabilized ZnO NPs could be more amenable towards applications in biotechnology and bioengineering.

Antibacterial properties and mechanism of biopolymer-based films functionalized by CuO/ZnO nanoparticles against Escherichia coli and Staphylococcus aureus

In this study, the nanocomposite film (SA-CS@CuO/ZnO) composed of sodium alginate (SA) and chitosan (CS) functionalized by copper oxide nanoparticles (CuONPs) and zinc oxide nanoparticles (ZnONPs) was fabricated, then its antibacterial mechanisms against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were systematically investigated. When the contents of CuONPs and ZnONPs reached 1.5 % (w/w) and 0.5 % (w/w), respectively, the SA-CS@CuO/ZnO exhibited great mechanical, barrier, and optical properties. Moreover, the incorporation of ZnONPs enhanced the photocatalytic ability of SA-CS@CuO/ZnO, producing a high level of reactive oxygen species under light irradiation. Further, antibacterial results showed that SA-CS@CuO/ZnO treatment inhibited the growth of E. coli and S. aureus higher than 60 % in the dark and exceeded 90 % under light irradiation. This was also manifested in the incompleteness of bacterial cell structure, accompanied by unstable cellular redox balance and DNA disruption. The functions of differentially expressed genes screened by transcriptome analysis were mainly involved in membrane transport, cell wall and membrane synthesis, cellular antioxidant defense system, cell membrane and DNA repair system. The changes in bacterial transcriptional regulation reflected the disturbance in the physiological activities and loss of cell integrity, leading to damage of bacterial cells or death.

A review on advances in graphene-derivative/polysaccharide bionanocomposites: Therapeutics, pharmacogenomics and toxicity

Graphene-based bionanocomposites are employed in several ailments, such as cancers and infectious diseases, due to their large surface area (to carry drugs), photothermal properties, and ease of their functionalization (owing to their active groups). Modification of graphene-derivatives with polysaccharides is a promising strategy to decrease their toxicity and improve target ability, which consequently enhances their biotherapeutic efficacy. Herein, functionalization of graphene-based materials with carbohydrate polymers (e.g., chitosan, starch, alginate, hyaluronic acid, and cellulose) are presented. Subsequently, recent advances in graphene nanomaterial/polysaccharide-based bionanocomposites in infection treatment and cancer therapy are comprehensively discussed. Pharmacogenomic and toxicity assessments for these bionanocomposites are also highlighted to provide insight for future optimized and smart investigations and researches.

Antibacterial Action of Nanoparticle Loaded Nanocomposites Based on Graphene and Its Derivatives: A Mini-Review

Bacterial infections constitute a severe problem in various areas of everyday life, causing pain and death, and adding enormous costs to healthcare worldwide. Besides, they cause important concerns in other industries, such as cloth, food packaging, and biomedicine, among others. Despite the intensive efforts of academics and researchers, there is lack of a general solutions to restrict bacterial growth. Among the various approaches, the use of antibacterial nanomaterials is a very promising way to fight the microorganisms due to their high specific surface area and intrinsic or chemically incorporated antibacterial action. Graphene, a 2D carbon-based ultra-thin biocompatible nanomaterial with excellent mechanical, thermal, and electrical properties, and its derivatives, graphene oxide (GO) and reduced graphene oxide (rGO), are highly suitable candidates for restricting microbial infections. However, the mechanisms of antimicrobial action, their cytotoxicity, and other issues remain unclear. This mini-review provides select examples on the leading advances in the development of antimicrobial nanocomposites incorporating inorganic nanoparticles and graphene or its derivatives, with the aim of providing a better understanding of the antibacterial properties of graphene-based nanomaterials.

Adsorption of Salmonella in Clay Minerals and Clay-Based Materials

A series of clay minerals and clay-based materials have been tested to eliminate one of the most dangerous bacteria we can find in the water: Salmonella. It has been proven that the use of clays and their PCH materials can be a suitable method for removing Salmonella from water. The results of this initial study show that all the materials analyzed have great salmonella adsorption capacities ranging from the lowest value observed in the mont-PCH sample (0.29 × 1010 CFU g−1) to the highest value observed in the natural palygorskite sample (1.52 × 1010 CFU g−1). Macroporosity, accessible external surface area, and the presence of silanol groups in the external surface of the particles appears to be the controlling factors for Salmonella adsorption capacity while it seems that the structural characteristics of the clay minerals and their respective PCH does not affect the adsorption capacity.

A robust host-guest interaction controlled probe immobilization strategy for the ultrasensitive detection of HBV DNA using hollow HP5-Au/CoS nanobox as biosensing platform

The combination of supramolecular chemistry and nanotechnology has potentially applied in the construction of biosensors, and thus improves the analytical performance and robustness of electron devices. Herein, a new sandwich-type DNA sensor was constructed for ultrasensitive determination of hepatitis B virus (HBV) DNA, a recognized marker for chronic hepatitis B. The water-soluble pillar[5]arene stabilized Pd NPs combined with reduced graphene oxide nanosheet (WP5-Pd/RGO) was synthesized and employed as supporting material for the modification of electrode surface. The probe DNA was immobilized onto the electrode surface through a new strategy based on the host-guest interaction between WP5 and methylene blue labeled DNA (MB-DNA). Moreover, MOF-derived cobalt sulfide nanobox was prepared to anchor the hydroxylatopillar[5]arene stabilized Au NPs (HP5-Au/CoS), which had superior electrocatalytic performance towards H₂O₂ reduction to achieve signal amplification. Under the optimized conditions, the proposed sensor displayed a linear relationship between amperometric currents and the logarithm of tDNA solution from 1 × 10^-15 mol/L to 1 × 10^-9 mol/L, and a low detection limit of 0.32 fmol/L. What's more, the DNA sensor had remarkable behaviors of stability, reproducibility, specificity, and accuracy, which provided a potential and promising prospect for clinical diagnosis and analysis.

Medium-Dependent Antibacterial Properties and Bacterial Filtration Ability of Reduced Graphene Oxide

Toxicity of reduced graphene oxide (rGO) has been a topic of multiple studies and was shown to depend on a variety of characteristics of rGO and biological objects of interest. In this paper, we demonstrate that when studying the same dispersions of rGO and fluorescent Escherichia coli (E. coli) bacteria, the outcome of nanotoxicity experiments also depends on the type of culture medium. We show that rGO inhibits the growth of bacteria in a nutrition medium but shows little effect on the behavior of E. coli in a physiological saline solution. The observed effects of rGO on E. coli in different media could be at least partially rationalized through the adsorption of bacteria and nutrients on the dispersed rGO sheets, which is likely mediated via hydrogen bonding. We also found that the interaction between rGO and E. coli is medium-dependent, and in physiological saline solutions they form stable flocculate structures that were not observed in nutrition media. Furthermore, the aggregation of rGO and E. coli in saline media was observed regardless of whether the bacteria were alive or dead. Filtration of the aggregate suspensions led to nearly complete removal of bacteria from filtered liquids, which highlights the potential of rGO for the filtration and separation of biological contaminants, regardless of whether they include live or dead microorganisms.

Combining micelle-clay sorption to solar photo-Fenton processes for domestic wastewater treatment

A tertiary treatment of effluent from a biological domestic wastewater treatment plant was tested by combining filtration and solar photocatalysis. Adsorption was carried out by a sequence of two column filters, the first one filled with granular activated carbon (GAC) and the second one with granulated nano-composite of micelle-montmorillonite mixed with sand (20:100, w/w). The applied solar advanced oxidation process was homogeneous photo-Fenton photocatalysis using peroxymonosulfate (PMS) as oxidant agent. This combination of simple, robust, and low-cost technologies aimed to ensure water disinfection and emerging contaminants (ECs, mainly pharmaceuticals) removal. The filtration step showed good performances in removing dissolved organic matter and practically removing all bacteria such as Escherichia coli and Enterococcus faecalis from the secondary treated water. Solar advanced oxidation processes were efficient in elimination of trace levels of ECs. The final effluent presented an improved sanitary level with acceptable chemical and biological characteristics for irrigation.

Nanocarbon materials in water disinfection: state-of-the-art and future directions

Water disinfection practices are critical for supplying safe drinking water. Existing water disinfection methods come with various drawbacks, calling for alternative or complementary solutions. Nanocarbon materials (NCMs) offer unique advantages for water disinfection owing to their high antimicrobial activity, often low environmental/human toxicity, and tunable physicochemical properties. Nevertheless, it is a challenge to assess the research progress made so far due to the structure and property diversity in NCMs as well as their different targeted applications. Because of these, here we provide a broad outline of this emerging field in three parts. First, we introduce the antimicrobial activities of the different types of NCMs, including fullerenes, nanodiamonds, carbon (nano)dots, carbon nanotubes, and graphene-family materials. Next, we discuss the current status in applying these NCMs for different water disinfection problems, especially as hydrogel filters, filtration membranes, recyclable aggregates, and electrochemical devices. We also introduce the use of NCMs in photocatalysts for photocatalytic water disinfection. Lastly, we put forward the key hurdles of the field that hamper the realization of the practical applications and propose possible directions for future investigations to address those. We hope that this minireview will encourage researchers to tackle these challenges and innovate NCM-based water disinfection platforms in the near future.

Antibacterial Properties of Graphene-Based Nanomaterials

Bacteria mediated infections may cause various acute or chronic illnesses and antibiotic resistance in pathogenic bacteria has become a serious health problem around the world due to their excessive use or misuse. Replacement of existing antibacterial agents with a novel and efficient alternative is the immediate demand to alleviate this problem. Graphene-based materials have been exquisitely studied because of their remarkable bactericidal activity on a wide range of bacteria. Graphene-based materials provide advantages of easy preparation, renewable, unique catalytic properties, and exceptional physical properties such as a large specific surface area and mechanical strength. However, several queries related to the mechanism of action, significance of size and composition toward bacterial activity, toxicity criteria, and other issues are needed to be addressed. This review summarizes the recent efforts that have been made so far toward the development of graphene-based antibacterial materials to face current challenges to combat against the bacterial targets. This review describes the inherent antibacterial activity of graphene-family and recent advances that have been made on graphene-based antibacterial materials covering the functionalization with silver nanoparticles, other metal ions/oxides nanoparticles, polymers, antibiotics, and enzymes along with their multicomponent functionalization. Furthermore, the review describes the biosafety of the graphene-based antibacterial materials. It is hoped that this review will provide valuable current insight and excite new ideas for the further development of safe and efficient graphene-based antibacterial materials.

Development of α- and γ-Fe2O3 decorated graphene oxides for glyphosate removal from water

In this study, the proposed adsorbent composed of graphene oxide (GO) functionalized by magnetic nanoparticles of iron oxide (α-γ-Fe2O3) was obtained by a simple ultrasonication process. This new material was used for the removal of glyphosate in water. The nanoparticulated iron oxide used was synthesized by means of a modified sol-gel method, which does not use organic solvents. The adsorbent material (GO-α-γ-Fe2O3) obtained was characterized by magnetic measurements, and it can be proved that it has superparamagnetic properties, allowing fast and efficient magnetic separation. The equilibrium time for the adsorption of glyphosate when using GO-α-γ-Fe2O3 was 2 hours and the maximum removal was 92% at 15°C, with a maximum adsorption capacity of 46.8 mg g-1. Langmuir model and pseudo-second-order kinetic model correlated satisfactorily to the experimental data. The thermodynamic parameters showed that the adsorption of glyphosate on GO-α-γ-Fe2O3 was spontaneous, exothermic and thermodynamically favorable at temperature of 15-45°C. Thus the adsorbent material GO-α-γ-Fe2O3 proposed in this study is considered a good candidate to be used in the removal of glyphosate from aqueous solutions, presenting high adsorption capacity, low cost and magnetic properties that facilitate the separation of the adsorbent material.

A Review on Graphene-Based Nanomaterials in Biomedical Applications and Risks in Environment and Health

Graphene-based nanomaterials (GBNs) have attracted increasing interests of the scientific community due to their unique physicochemical properties and their applications in biotechnology, biomedicine, bioengineering, disease diagnosis and therapy. Although a large amount of researches have been conducted on these novel nanomaterials, limited comprehensive reviews are published on their biomedical applications and potential environmental and human health effects. The present research aimed at addressing this knowledge gap by examining and discussing: (1) the history, synthesis, structural properties and recent developments of GBNs for biomedical applications; (2) GBNs uses as therapeutics, drug/gene delivery and antibacterial materials; (3) GBNs applications in tissue engineering and in research as biosensors and bioimaging materials; and (4) GBNs potential environmental effects and human health risks. It also discussed the perspectives and challenges associated with the biomedical applications of GBNs.

Graphene sponge decorated with copper nanoparticles as a novel bactericidal filter for inactivation of Escherichia coli

Nanotechnology has great potential in water purification. However, the limitations such as aggregation and toxicity of nanomaterials have blocked their practical application. In this work, a novel copper nanoparticles-decorated graphene sponge (Cu-GS) was synthesized using a facile hydrothermal method. Cu-GS consisting of three-dimensional (3D) porous graphene network and well-dispersed Cu nanoparticles exhibited high antibacterial efficiency against Esherichia coli when used as a bactericidal filter. The morphological changes determined by scanning electron microscope and fluorescence images measured by flow cytometry confirmed the involvement of membrane damage induced by Cu-GS in their antibacterial process. The oxidative ability of Cu-GS and intercellular reactive oxygen species (ROS) were also determined to elucidate the possible antibacterial mechanism of Cu-GS. Moreover, the concentration of released copper ions from Cu-GS was far below the drinking water standard, and the copper ions also have an effect on the antibacterial activity of Cu-GS. Results suggested that Cu-GS as a novel bactericidal filter possessed a potential application of water disinfection.

Versatile graphene-based photothermal nanocomposites for effectively capturing and killing bacteria, and for destroying bacterial biofilms

Bacterial infection is a worldwide health problem. Finding new potential antibacterial materials and developing advanced treatment strategies are becoming increasingly important and urgent. Herein, a versatile graphene-based photothermal nanocomposite was prepared for rapidly capturing and effectively eliminating both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli), and for destroying bacterial biofilms with near-infrared (NIR) irradiation. In this work, chitosan-functionalized magnetic graphene oxide (GO-IO-CS) was synthesized as a multifunctional therapy agent through a hydrothermal method. Chitosan could efficiently contact and capture bacteria by its positively charged surface functional groups, and graphene oxide could act as an effective photothermal killer to convert NIR light into local heat to enhance antibacterial activity. The super-paramagnetic properties of GO-IO-CS made it easy to separate and aggregate the bacteria, so improving the photothermal sterilization efficiency. GO-IO-CS was demonstrated to eliminate bacteria effectively after 10 min of NIR irradiation and to destroy bacterial biofilms. Furthermore, this antibiotic agent could be regenerated with an external magnet and reused in a subsequent antibacterial application.

Highly efficient inactivation of bacteria found in drinking water using chitosan-bentonite composites: Modelling and breakthrough curve analysis

Disinfection of bacterially-contaminated drinking water requires a robust and effective technique and can be achieved by using an appropriate disinfectant material. The advanced use of nanomaterials is observed as an alternative and effective way for the disinfection process and water treatment as a whole. Hence, the inactivation of Escherichia coli (E. coli) using chitosan-Bentonite (Cts-Bent) composites was studied in a fixed bed column. Cts-Bent composites were synthesized using in situ cross-linking method using Bent-supported silver and zinc oxide nanoparticles. These composites were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy. The effect of the composite bed mass, initial concentration of bacteria, and flow rate on the bacterial inactivation was investigated. The characterization results revealed that the composites were successfully prepared and confirmed the presence of both silver and zinc oxide nanoparticles in the chitosan matrix. The growth curves of E. coli were expressed as breakthrough curves, based on the logistic, Gompertz, and Boltzmann models. The breakthrough time and processed volume of treated water at breakthrough were used as performance indicators, which revealed that the composites performed best at low bacterial concentration and flow rate and with substantial bed mass. The chitosan composites were found to be highly effective, which was demonstrated when no bacteria were observed in the effluent sample within the first 27 h of analysing river water. All the models were suitable for adequately describing and reproducing the experimental data with a sigmoidal pattern. Therefore, the prepared composite is showing potential to work as a disinfectant and provide an alternative solution for water disinfection; hence this study should propel further research of the same or similar materials.

Environmental implications and applications of engineered nanoscale magnetite and its hybrid nanocomposites: A review of recent literature

This review focuses on environmental implications and applications of engineered magnetite (Fe3O4) nanoparticles (MNPs) as a single phase or a component of a hybrid nanocomposite that exhibits superparamagnetism and high surface area. MNPs are synthesized via co-precipitation, thermal decomposition and combustion, hydrothermal process, emulsion, microbial process, and green approaches. Aggregation/sedimentation and transport of MNPs depend on surface charge of MNPs and geochemical parameters such as pH, ionic strength, and organic matter. MNPs generally have low toxicity to humans and ecosystem. MNPs are used for constructing chemical/biosensors and for catalyzing a variety of chemical reactions. MNPs are used for air cleanup and carbon sequestration. MNP nanocomposites are designed as antimicrobial agents for water disinfection and flocculants for water treatment. Conjugated MNPs are widely used for adsorptive/separative removal of organics, dyes, oil, arsenic, phosphate, molybdate, fluoride, selenium, Cr(VI), heavy metal cations, radionuclides, and rare earth elements. MNPs can degrade organic/inorganic contaminants via chemical reduction or catalyze chemical oxidation in water, sediment, and soil. Future studies should further explore mechanisms of MNP interactions with other nanomaterials and contaminants, economic and green approaches of MNP synthesis, and field scale demonstration of MNP utilization.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Fe2O3 nanoparticles anchored on 2D kaolinite with enhanced antibacterial activity

Fe₂O₃ nanoparticles with different dispersion states on the surface of modified kaolinite were controlled for enhancing antibacterial activity.

Synthesis and absorption performance of core–shell magnetic polymers for solid phase extraction and detection of glibenclamide in hypoglycemic health products

Synthesis of GO-modified magnetic polymers for fast separation and effective enrichment of trace glibenclamide in hypoglycemic health products.

Synthesis, Characterization, and Bactericidal Evaluation of Chitosan/Guanidine Functionalized Graphene Oxide Composites

In response to the wide spread of microbial contamination induced by bacterial pathogens, the development of novel materials with excellent antibacterial activity is of great interest. In this study, novel antibacterial chitosan (CS) and polyhexamethylene guanidine hydrochloride (PHGC) dual-polymer-functionalized graphene oxide (GO) (GO-CS-PHGC) composites were designed and easily fabricated. The as-prepared materials were characterized by Fourier transform infrared (FTIR), X-ray photoelectron spectrometer (XPS), field emission scanning electron microscopy (FE-SEM), transmission electron microscope (TEM), thermogravimetric analysis (TGA) and Raman spectroscopy. Their antibacterial capability towards bacterial strains was also studied by incubating both Gram-negative bacteria and Gram-positive bacteria in their presence. More significantly, the synergistic antibacterial action of the three components was assayed, and the findings implied that the as-prepared GO-CS-PHGC shows enhanced antibacterial activity when compared to its single components (GO, CS, PHGC or CS-PHGC) and the mixture of individual components. Not only Gram-negative bacteria but also Gram-positive bacteria are greatly inhibited by GO-CS-PHGC composites. The minimum inhibitory concentration (MIC) value of GO-CS-PHGC against E. coli was 32 μg/mL. With the powerful antibacterial activity as well as its low cost and facile preparation, GO-CS-PHGC has potential applications as a novel antibacterial agent in a wide range of biomedical uses.

Antibacterial applications of graphene-based nanomaterials: Recent achievements and challenges

Graphene has emerged as a novel green broad-spectrum antibacterial material, with little bacterial resistance and tolerable cytotoxic effect on mammalian cells. It exerts its antibacterial action via physical damages such as direct contact of its sharp edges with bacterial membranes and destructive extraction of lipid molecules. These damages also include wrapping and photothermal ablation mechanisms. Alternatively, chemical damage of bacteria is caused by oxidative stress with the generation of reactive oxygen species and charge transfer. Furthermore, graphene has been used as a support to disperse and stabilize various nanomaterials, such as metals, metal oxides, and polymers, with high antibacterial efficiency due to the synergistic effect. In addition, graphene-based antibiotic drug delivery platforms have been constructed. Due to the superior antibacterial properties and good biocompatibility, graphene-based nanocomposites have a wide range of applications, such as antibacterial packaging, wound dressing, and water disinfection. In this review, we highlight the antibacterial mechanism of graphene and summarize recent advances related to the antibacterial activity of graphene-based materials. Many of the recent application examples are further discussed. We hope that this review provides valuable insight, stimulates broader concerns, and spurs further developments in this promising field.

Antibacterial activity of graphene-based materials

Complications related to infectious diseases have significantly decreased due to the availability and use of a wide variety of antibiotics and antimicrobial agents. However, excessive use of antibiotics and antimicrobial agents over years has increased the number of drug resistant pathogens. Microbial multidrug resistance poses serious risks and consequently research attention has refocused on finding alternatives for antimicrobial treatment. Among the various approaches, the use of engineered nanostructures is currently the most promising strategy to overcome microbial drug resistance by improving the remedial efficiency due to their high surface-to-volume ratio and their intrinsic or chemically incorporated antibacterial activity. Graphene, a two-dimensional ultra-thin nanomaterial, possesses excellent biocompatibility, putting it in the forefront for different applications in biosensing, drug delivery, biomedical device development, diagnostics and therapeutics. Graphene-based nanostructures also hold great promise for combating microbial infections. Yet, several questions remain unanswered such as the mechanism of action with the microbial entities, the importance of size and chemical composition in the inhibition of bacterial proliferation and adhesion, cytotoxicity, and other issues when considering future clinical implementation. This review summarizes the current efforts in the formulation of graphene-based nanocomposites with antimicrobial and antibiofilm activities as new tools to tackle the current challenges in fighting against bacterial targets. Furthermore, the review describes the features of graphene-bacterial interactions, with the hope to shed light on the range of possible mode of actions, serving the goal to develop a better understanding of the antibacterial capabilities of graphene-based nanostructures.

The Antibacterial Applications of Graphene and Its Derivatives

Graphene materials have unique structures and outstanding thermal, optical, mechanical and electronic properties. In the last decade, these materials have attracted substantial interest in the field of nanomaterials, with applications ranging from biosensors to biomedicine. Among these applications, great advances have been made in the field of antibacterial agents. Here, recent advancements in the use of graphene and its derivatives as antibacterial agents are reviewed. Graphene is used in three forms: the pristine form; mixed with other antibacterial agents, such as Ag and chitosan; or with a base material, such as poly (N-vinylcarbazole) (PVK) and poly (lactic acid) (PLA). The main mechanisms proposed to explain the antibacterial behaviors of graphene and its derivatives are the membrane stress hypothesis, the oxidative stress hypothesis, the entrapment hypothesis, the electron transfer hypothesis and the photothermal hypothesis. This review describes contributions to improving these promising materials for antibacterial applications.

Antibacterial properties and mechanism of graphene oxide-silver nanocomposites as bactericidal agents for water disinfection

Providing clean and affordable drinking water without harmful disinfection byproducts generated by conventional chemical disinfectants gives rise to the need for technological innovation. Nanotechnology has great potential in purifying water and wastewater treatment. A graphene oxide-silver (GO-Ag) nanocomposite with excellent antibacterial activity was prepared and characterized by transmission electron microscope and X-ray photoelectron spectroscopy. The tests were carried out using Escherichia coli and Staphylococcus aureus as model strains of Gram-negative and Gram-positive bacteria, respectively. The effect of bactericide dosage and pH on antibacterial activity of GO-Ag was examined. Morphological observation of bacterial cells by scanning electron microscope showed that GO-Ag was much more destructive to cell membrane of Escherichia coli than that of Staphylococcus aureus. Experiments were carried out using catalase, superoxide dismutase and sodium thioglycollate to investigate the formation of reactive oxygen species and free silver ions in the bactericidal process. The activity of intracellular antioxidant enzymes was measured to investigate the potential role of oxidative stress. According to the consequence, synergetic mechanism including destruction of cell membranes and oxidative stress accounted for the antibacterial activity of GO-Ag nanocomposites. All the results suggested that GO-Ag nanocomposites displayed a good potential for application in water disinfection.

Comparative in vitro toxicity of a graphene oxide-silver nanocomposite and the pristine counterparts toward macrophages

BACKGROUND

Graphene oxide (GO) is a highly oxidized graphene form with oxygen functional groups on its surface. GO is an excellent platform to support and stabilize silver nanoparticles (AgNP), which gives rise to the graphene oxide-silver nanoparticle (GOAg) nanocomposite. Understanding how this nanocomposite interacts with cells is a toxicological challenge of great importance for future biomedical applications, and macrophage cells can provide information concerning the biocompatibility of these nanomaterials. The cytotoxicity of the GOAg nanocomposite, pristine GO, and pristine AgNP was compared toward two representative murine macrophages: a tumoral lineage (J774) and peritoneal macrophages collected from Balb/c mouse. The production of reactive oxygen species (ROS) by J774 macrophages was also monitored. We investigated the internalization of nanomaterials by transmission electron microscopy (TEM). The quantification of internalized silver was carried out by inductively coupled plasma mass spectrometry (ICP-MS). Nanomaterial stability in the cell media was investigated overtime by visual observation, inductively coupled plasma optical emission spectrometry (ICP OES), and dynamic light scattering (DLS).

RESULTS

The GOAg nanocomposite was more toxic than pristine GO and pristine AgNP for both macrophages, and it significantly induced more ROS production compared to pristine AgNP. TEM analysis showed that GOAg was internalized by tumoral J774 macrophages. However, macrophages internalized approximately 60 % less GOAg than did pristine AgNP. The images also showed the degradation of nanocomposite inside cells.

CONCLUSIONS

Although the GOAg nanocomposite was less internalized by the macrophage cells, it was more toxic than the pristine counterparts and induced remarkable oxidative stress. Our findings strongly reveal a synergistic toxicity effect of the GOAg nanocomposite. The toxicity and fate of nanocomposites in cells are some of the major concerns in the development of novel biocompatible materials and must be carefully evaluated.