Enhanced visible-light photocatalytic activity of active Al₂O₃/g-C₃N₄ heterojunctions synthesized via surface hydroxyl modification

Organic-inorganic hybrid leather fatliquoring agent with fluidity: Enhanced flame retardancy and physical-mechanical properties for leather collagen fibers

Solving the flammability problem of the neutral oils component of fatliquoring agent is critical to enhance the fire safety of leather. Although the incorporation of flame retardants represents an effective strategy, the ongoing presence of neutral oils also accelerates the combustion of collagen and fats in leather, thus often limiting the efficacy of this method. Herein, a solvent-free nanofluid fatliquoring agent without neutral oil provided by the layered double hydroxide (LDH) and polyether amine is prepared, endows the leather fire-resistant performances and physical-mechanical properties. Solvent-free LDH nanofluid fatliquoring agent (LDH-K-M2070) presents favorable liquid characteristics and achieves uniform dispersion of LDH inside the leather. The limit oxygen index value of 12 % LDH-K-M2070 fatliquored leather reached 28.8 %, and the vertical combustion test showed that LDH-K-M2070 fatliquored leather could self-extinguish only 15 s after ignition. Meanwhile, compared with modified castor oil fatliquored leather, the peak of heat release rate and total smoke production of 12 % LDH-K-M2070 fatliquored leather are reduced by 28.2 % and 69.4 %, respectively. More importantly, LDH-K-M2070 fatliquored leather exhibit significantly improved softness, compared to unfatliquored leather. This work provides a new insight into developing oil-free fatliquoring agent with flame retardancy and lubricating function.

Versatile g-C3N4/AlOOH nanocomposites: Efficient photocatalyst for dye removal, algae inactivation, and glucose detection

Visible light photocatalysts hold great promise for water purification, yet research on highly efficient, non-toxic photocatalysts is limited. This study synthesized novel g-C3N4/AlOOH photocatalytic nanocomposites via thermal condensation, enhancing adsorption and visible light degradation by 36-fold and 11-fold, respectively, compared to g-C3N4 alone. The nanocomposites achieved a 98% removal rate of methyl orange under xenon lamp irradiation (>400 nm) for 1 h. This study marked the first demonstration of using a low-power LED (0.6W) for photocatalytic algae inactivation in an aquarium ecosystem. Fluorescence spectroscopy showed a 98.9% removal efficiency of chlorophyll a after 12 h of photocatalyzing by g-C3N4/AlOOH, doubling that of g-C3N4 alone. Algae inactivation was attributed to rupture, dehydration, and changes in dissolved organic matter. Hole (h+) trapping experiments identified them as the primary active species for degrading methyl orange and algae. Materials analyses confirmed the formation of g-C3N4-AlOOH heterostructures, high surface potential, and Type II heterojunctions, which reduce electron-hole pair recombination. Furthermore, g-C3N4/AlOOH demonstrated selective non-enzymatic fluorescence detection of glucose, showing a linear relationship in 0∼4 mM, suitable for tears glucose detection. This study offers crucial insights and strategies for designing novel, non-toxic, high-performance visible light photocatalytic materials, efficient dye degradation, algae inactivation, and selective glucose detection.

A focused review on photocatalytic potential of graphitic carbon nitride (g-C3N4) based metal oxide-nanostructures for effective remediation of most overused antibiotics

Researchers in the field of photocatalysis are interested in finding a solution to the problem of charge transfer and recombination in photodegradation mechanisms. The ideal photoactive catalyst would be inexpensive, environmentally friendly, easily manufactured, and highly efficient. Graphitic carbon nitride (g-C3N4) and metal oxide (MOx) based nanocomposites (g-CN/MOx) are among the photocatalysts that provide the best results in terms of charge transfer capacity, redox capabilities, and charge recombination inhibition. This article provides a comprehensive overview of the latest research on antibiotic removal from wastewater using photocatalysts based on g-C3N4 and metal oxides nanocomposites. Amoxicillin (AMX), Azithromycin (AZM), Cefixime (CFM), Ciprofloxacin (CIP), and Tetracycline (TC) are some of the common antibiotics that are the focus of this review article's examination of the photocatalytic behavior of various g-C3N4/metal oxide-based photocatalysts. A research gap demonstrates that many studies are required to use these nanocomposites for photodegradation of antibiotics. By providing a better grasp of the photocatalysis process, this review encourages scientists and researchers to develop an accurate and appropriate photocatalyst to reduce environmental risks. The main findings of this review article suggest that the cost-effective g-C3N4/MOx-based nanocomposites exhibit excellent photodegradation properties, high charge transfer, broadening light response, and charge separation. They promote enhanced charge transportation, superior electron conductivity, high redox capability, and suppressing charge recombination rate. The photodegradation mechanism involves various reactive oxygen species (ROSs), including superoxide radicals, hydroxyl radicals, and holes which promotes the photocatalysis process. The exact transportation mechanism of electrons and holes is unclear, but a rapid charge-carrier transit can significantly increase and speed up the photooxidation process.

Photocatalytic CO2 Reduction to Ethanol by ZnCo2O4/ZnO Janus Hollow Nanofibers

Photocatalytic carbon dioxide (CO2) reduction for high-value hydrocarbon fuel production is a promising strategy to tackle global energy demand and climate change. However, this technology faces formidable challenges, primarily stemming from low yield and poor selectivity of C2 products of the desired hydrocarbon fuels. This study reported ZnO/ZnCo2O4 Janus hollow nanofibers (ZnO/ZCO JHNFs) prepared by electrospinning and atomic layer deposition. Photocatalytic tests revealed an ethanol yield of 4.99 μmol g-1 h-1 for ZnO/ZnCo2O4 JHNFs, surpassing mixed ZnO/ZnCo2O4 nanofibers (ZnO/ZCO NFs) by 4.35 times and pure ZnO by 12.7 times. The selectivity of 58.8% is 2.38 and 4.49 times higher than those of ZnO/ZnCo2O4 NFs and ZnO, respectively. These enhancements are attributed to efficient carrier separation facilitated by the ordered internal electric field of the Z-scheme heterojunction interface, validated by the energy band evaluations from experimentation and density functional theory (DFT) simulations and charge separation characterizations of photocurrent, impedance, and photoluminescence spectra. The Janus structure also effectively exposes the surface of ZnCo2O4 to CO2 molecules, increasing the active site availability, as confirmed by BET nitrogen adsorption/desorption, temperature-programmed desorption tests, and DFT adsorption energy calculations. This study proposes a novel approach for efficient photocatalytic hydrocarbon fuel production, with potential applications in energy and climate crisis mitigation.

A g-C3N4/rGO/Cs3Bi2Br9 mediated Z-scheme heterojunction for enhanced photocatalytic CO2 reduction

Photocatalytic CO2 reduction plays a crucial role in advancing solar fuels, and enhancing the efficiency of the chosen photocatalysts is essential for sustainable energy production. This study demonstrates advancements in the performance of g-C3N4 as a photocatalyst achieved through surface modifications such as exfoliation to increase surface area and surface oxidation for improved charge separation. We also introduce reduced graphene oxide (rGO) in various ratios to both bulk and exfoliated g-C3N4, which effectively mitigates charge recombination and establishes an optimal ratio for enhanced efficiency. g-C3N4/rGO serves to fabricate a hybrid organic/inorganic heterojunction with Cs3Bi2Br9, resulting in a g-C3N4/rGO/Cs3Bi2Br9 composite. This leads to a remarkable increase in photocatalytic conversion of CO2 and H2O to CO, H2 and CH4 at rates of 54.3 (±2.0) μmole- g-1 h-1, surpassing that of pure Cs3Bi2Br9 (11.2 ± 0.4 μmole- g-1 h-1) and bulk g-C3N4 (5.5 ± 0.5 μmole- g-1 h-1). The experimentally determined energy diagram indicates that rGO acts as a solid redox mediator between g-C3N4 and Cs3Bi2Br9 in a Z-scheme heterojunction configuration, ensuring that the semiconductor (Cs3Bi2Br9) with the shallowest conduction band drives the reduction and the one with the deepest valence band (g-C3N4) drives the oxidation. The successful formation of this high-performance heterojunction underscores the potential of the developed composite as a photocatalyst for CO2 reduction, offering promising prospects for advancing the field of solar fuels and achieving sustainable energy goals.

Hollow structured CdS@ZnIn2S4 Z-scheme heterojunction for bifunctional photocatalytic hydrogen evolution and selective benzylamine oxidation

Photocatalytic hydrogen evolution (PHE) is frequently constrained by inadequate light utilization and the rapid combination rate of the photogenerated electron-hole pairs. Additionally, conventional PHE processes are often facilitated by the addition of sacrificial reagents to consume photo-induced holes, which makes this approach economically unfavorable. Herein, we designed a spatially separated bifunctional cocatalyst decorated Z-scheme heterojunction of hollow structured CdS (HCdS) @ZnIn2S4 (ZIS), which was prepared by a sacrificial hard template method followed by photo-deposition. Consequently, PdOx@HCdS@ZIS@Pt exhibited efficient PHE (86.38 mmol·g-1·h-1) and benzylamine (BA) oxidation coupling (164.75 mmol·g-1·h-1) with high selectivity (97.34 %). The unique hollow core-shelled morphology and bifunctional cocatalyst loading in this work hold great potential for the design and synthesis of bifunctional Z-scheme photocatalysts.

Fabrication of next-generation multifunctional LBG-s-AgNPs@ g-C3N4 NS hybrid nanostructures for environmental applications

Toxic industrial wastes and microbial pathogens in water pose a continuous threat to aquatic life as well as alarming situations for humans. Developing advanced materials with an environmentally friendly approach is always preferable for heterogeneous visible light photocatalysis. As a green reducing tool, LBG-s-AgNPs@ g-C3N4 NS hybrid nanostructures were anchored onto graphitic carbon nitride (g-C3N4) using an environmentally friendly approach of anchoring/decorating AgNPs onto g-C3N4. With the help of advanced techniques, the fabricated hybrid nanostructures were characterized. Using a sheet like matrix of g-C3N4, nanosized and well-defined uniform AgNPs displayed good antibacterial activity as well as superior photodegradation of hazardous dyes, including methylene blue (MB) and Rhodamine B (RhB). Based on the disc diffusion method, three pathogenic microorganisms of clinical significance can be identified by showing the magnitude of their susceptibility. As a result, the following antimicrobial potency was obtained: E. coli ≥ M. luteus ≥ S. aureus. In this study, green synthesized (biogenic) AgNPs decorated with g-C3N4 were found to be more potent antimicrobials than traditional AgNPs. Under visible light irradiation, LBG-s-AgNPs@g-C3N4 NS (0.01 M) demonstrated superior photocatalytic performance: ∼100% RhB degradation and ∼99% of MB degradation in 160 min. LBG-s-AgNPs@g-C3N4 NS showed the highest kinetic rate, 3.44 × 10-2 min-1, which is 27.74 times for the control activity in case of MB dye. While in case of RhB dye LBG-s-AgNPs@g-C3N4 NS showed the highest kinetic rate, 2.26 × 10-2 min-1, which is 17.51 times for the control activity. Due to the surface plasmon resonance (SPR) and reduction in recombination of the electrons and holes generated during photocatalysis, anchoring AgNPs to g-C3N4 further enhanced the photocatalytic degradation of dyes. Using this photocatalyst, hazardous dyes can be efficiently and rapidly degraded, allowing it to be applied for wastewater treatment contaminated with dyes. It also showed remarkable antimicrobial activity towards Gram-ve/Gram + ve pathogens.

Silica wastes derived multifunctional coatings for formaldehyde photodegradation and autonomous indoor humidity buffering

To maintain a comfortable and healthy indoor environment without large amounts of energy consumption is of great importance. The progress of multifunctional indoor coatings with formaldehyde photodegradation and humidity buffering capability is necessary. From the viewpoints of circular economy, the preparation of effective photocatalysts (denoted as sFCC/GCN-x and ESF/GCN-y) via the decoration of recycling industrial wastes (i.e., spent fluid catalytic cracking catalysts (sFCC) and enhancement silica fume (ESF)) onto graphitic carbon nitride (GCN) by using a simple route is reported. The obtained results show that the prepared sFCC/GCN-0.15 and ESF/GCN-0.15 photocatalysts have the rate constants of formaldehyde degradation of 0.0075 and 0.0082 min-1, respectively, which are superior to that of pristine GCN (0.0044 min-1) under visible-light irradiation. The enhanced transfer kinetics of photogenerated electrons and declined recombination of electron-hole pairs may account for the surpassing photocatalytic performance. Results obtained from electron paramagnetic resonance spectra and Mott-Schottky plots indicate that the formation of ･O2- via the reaction of O2 with electrons generated on the conduction band is the major reaction pathway to photodegrade formaldehyde under visible light. To further assess the real applications of prepared photocatalysts, the sFCC/GCN-0.15 and ESF/GCN-0.15 are used to fabricate the multifunctional coatings (denoted as s- and E-coatings) with sFCC and ESF as the main compositions. Experimentally, the E-coatings could reach the formaldehyde degradation efficiency of ca. 84.5% after 3 h of visible light irradiation and excellent humidity buffering ability (293.8 g m-2) which is at least 10-folds higher than commercial coatings (28.9 g m-2). This notable progress of humidity buffering capacity on E-coatings can be attributed to their surface textural properties. Most importantly, this study exemplifies the valorization of inorganic silica wastes to produce sustainable and multifunctional coatings which may offer the practical and cost-effective applications in the indoor living space.

Preparation of dual-use GPTES@ZnO photocatalyst from waste warm filter cake and evaluation of its synergic photocatalytic degradation for air-water purification

Organic pollutants are the most critical threats to the health of air and water resources. On this basis, fabricating a photocatalytic acrylic film with dual-use (i.e. removing benzene from air and MB/MO dyes from water) was aimed in this research. For this purpose, waste warm filter cake (WWFC) was used to extract zinc from it. Zinc element was separated from WWFC by a basic leaching method and acidified to prepare zinc oxide nanoparticles. In the following, a simple hydrothermal method was used to increase the surface functionality of the extracted ZnO nanoparticles in order to establish active reaction sites for reaction to silane coupling agent and increase in the holes that were prepared during photo-excitation. Thereafter, the nanoparticles were modified with 3-glycidoxypropyltriethoxysilane (GPTES) at different concentrations. The band gap of the modified nanoparticles decreased from 3.25 to 3.1 eV by surface modification. The photocatalytic performance of ZnO nanoparticles was assessed by degradation of MB and MO aqueous solution (50 ppm) under simulated UV/Visible irradiations. MB and MO were degraded 91 and 60% under UV light and 65 and 50% under visible light after 150 min of irradiation. The photo degradation rate increased after adding carboxy methyl cellulose (CMC) surfactant to methylene blue and adding cocamide-dea (CDE-G) surfactant to methyl orange. The results confirmed that the green surfactants improve the dispersion and surface interaction of the modified nanoparticles in the dyes solution and cause more electron charge transfer which creates effective photocatalytic sites. The prepared nanocomposite films were placed in a photo-reactor to remove gaseous benzene from air under UV/visible irradiation. Gas chromatography (GC) results showed that the modified nanoparticles removed up to 35.25 and 20.34% of benzene from air. Colorimetric analysis (ΔE*) showed that the acrylic film contained modified nanoparticles degraded 91 and 82% of MB, and 85 and 76% of MO under UV/visible lights, respectively. In the end, it can be said that these photocatalytic films are able to remove environmental pollution in air and water.

Ir-CoO Active Centers Supported on Porous Al2 O3 Nanosheets as Efficient and Durable Photo-Thermal Catalysts for CO2 Conversion

Photo-thermal catalytic CO₂ hydrogenation is currently extensively studied as one of the most promising approaches for the conversion of CO₂ into value-added chemicals under mild conditions; however, achieving desirable conversion efficiency and target product selectivity remains challenging. Herein, the fabrication of Ir-CoO/Al₂ O₃ catalysts derived from Ir/CoAl LDH composites is reported for photo-thermal CO₂ methanation, which consist of Ir-CoO ensembles as active centers that are evenly anchored on amorphous Al₂ O₃ nanosheets. A CH₄ production rate of 128.9 mmol g_cat⁻ ¹ h⁻¹  is achieved at 250 °C under ambient pressure and visible light irradiation, outperforming most reported metal-based catalysts. Mechanism studies based on density functional theory (DFT) calculations and numerical simulations reveal that the CoO nanoparticles function as photocatalysts to donate electrons for Ir nanoparticles and meanwhile act as "nanoheaters" to effectively elevate the local temperature around Ir active sites, thus promoting the adsorption, activation, and conversion of reactant molecules. In situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) demonstrates that illumination also efficiently boosts the conversion of formate intermediates. The mechanism of dual functions of photothermal semiconductors as photocatalysts for electron donation and as nano-heaters for local temperature enhancement provides new insight in the exploration for efficient photo-thermal catalysts.

Inactivation mechanism of E. coli in water by enhanced photocatalysis under visible light irradiation

Developing efficient and economical technologies for drinking water disinfection remains a challenge. We synthesized Ag/AgBr/LDH doped with various silver mass concentrations and explored its ability to inactivate E. coli under visible light irradiation (λ ≥ 400 nm). Our results indicated a total inactivation of E. coli (10⁷ CFU·mL^-1) within 80 min using 2 % Ag/AgBr/LDH in a laboratory-scale test. The method was evaluated for disinfecting three effluent samples collected from one drinking water treatment plant, covering representative water treatment processes. After five consecutive runs, the inactivation efficiency decreased slightly to 89 % in CFU·mL^-1, indicating that the photocatalysts had excellent stability and reusability. The mechanisms were analyzed by combining chemical and biological methods. It was verified that singlet oxygen (¹O₂), hydrogen peroxide (H₂O₂), and photo-generated electrons (e^-) were significant contributors to the inactivation process. Scanning electron microscopy images analysis showed the disruption of the membrane integrity of E. coli by photocatalytic oxidation. Internal component leakage and reduced enzyme activity were also observed in terms of K⁺ leakage, β-galactosidase activity, and antioxidant enzyme activity. The results by the transcriptomic analysis implied that Ag/AgBr/LDH regulating the oxidative stress response and cell membrane damage related genes was the main inactivation mechanism.

Enhancing Photocatalytic Antibiotics Mineralization and Water Oxidation via Constructing Interfacial Electric Field in Plate-on-Plate BiOCl/WO3 Photocatalysts

Two-dimensional materials and related plate-on-plate interfacial heterostructures offer great flexibility for integrating different atomic layers, providing an attractive scheme for the construction of built-in electric fields in photocatalysts. Here, we developed an interfacial engineering strategy to construct well-interfaced plate-on-plate BiOCl/WO₃ heterojunctions for general enhanced photocatalytic oxidation reactions. BiOCl/WO₃ heterojunctions exhibited significant enhancements in oxygen evolution and antibiotic degradation, with a rate of 9.5 times and 14.7 times higher than that of WO₃. This enhancement is attributed to the well lattice matching contact surface of WO₃ {020} plane with BiOCl {001} plane, which integrates a strong built-in electric field induced by Bi-O chemically bonds, providing atomically fast transport channels for electrons. These findings offer new guidelines for designing interfacial structures for high-performance oxidative photocatalysts and provide insights into the underlying interfacial carrier transport mechanisms.

High-efficiency adsorption removal of CR and MG dyes using AlOOH fibers embedded with porous CoFe2O4 nanoparticles

Owing to the toxicity and difficulty in degradation, how to the effective separation for the residual dyes in the aqueous solution is still an issue with great challenge in the area of environmental protection. Now, to high-efficiency removal of organic dyes from the aqueous solution, we design a unique AlOOH/CoFe₂O₄ adsorbent with porous CoFe₂O₄ nanoparticles embedded on the AlOOH fibers using a simple hydrothermal technique and calcination process. The structural properties and surface characteristics of the AlOOH/CoFe₂O₄ composites are detailedly analyzed by XRD, FTIR, XPS, TEM and SEM. Here, the high S_BET and specific porous structure are beneficial to improve the adsorption performance of AlOOH/CoFe₂O₄ adsorbents. Especially, when the molar ratio of AlOOH to CoFe₂O₄ in the AlOOH/CoFe₂O₄ fibers is 1:1, an optimal performance on adsorbing anionic Congo red (CR) and cationic methyl green (MG) dyes can be obtained at pH = 6.29, where the corresponding maximum adsorption capacities reach up to 565.0 and 423.7 mg g^-1, respectively. Factors leading to the change in the ability of adsorbing CR and MG dyes are systematically discussed, including contact time, temperature, initial concentrations, and pH values of the solutions. Meanwhile, the uptake of CR and MG dyes can best conform to Langmuir isotherm model and pseudo-second-order adsorption kinetics. The thermodynamic analysis verifies that the dye adsorption process is spontaneous and endothermic. Moreover, from the point view of practical application, the good reusability further makes the as-synthesized magnetic AlOOH/CoFe₂O₄ composite be a perfect adsorbent with efficiently removing both anionic and cationic dyes from aqueous solutions.

A Comprehensive Review on Graphitic Carbon Nitride for Carbon Dioxide Photoreduction

Inspired by natural photosynthesis, harnessing the wide range of natural solar energy and utilizing appropriate semiconductor-based catalysts to convert carbon dioxide into beneficial energy species, for example, CO, CH₄ , HCOOH, and CH₃ COH have been shown to be a sustainable and more environmentally friendly approach. Graphitic carbon nitride (g-C₃ N₄ ) has been regarded as a highly effective photocatalyst for the CO₂ reduction reaction, owing to its cost-effectiveness, high thermal and chemical stability, visible light absorption capability, and low toxicity. However, weaker electrical conductivity, fast recombination rate, smaller visible light absorption window, and reduced surface area make this catalytic material unsuitable for commercial photocatalytic applications. Therefore, certain procedures, including elemental doping, structural modulation, functional group adjustment of g-C₃ N₄ , the addition of metal complex motif, and others, may be used to improve its photocatalytic activity towards effective CO₂ reduction. This review has investigated the scientific community's perspectives on synthetic pathways and material optimization approaches used to increase the selectivity and efficiency of the g-C₃ N₄ -based hybrid structures, as well as their benefits and drawbacks on photocatalytic CO₂ reduction. Finally, the review concludes a comparative discussion and presents a promising picture of the future scope of the improvements.

Promoted Activity of Surface Hydroxyls on γ-Al2O3 Mineral Dust with the Coexistence of SO2 and NH3

Sulfate and ammonium formed on mineral dust can be mutually accelerated through the heterogeneous reactions of coexisting SO₂ and NH₃. However, little is known about the underlying mechanism, especially the pivotal reactive sites. Using combined Born-Oppenheimer molecular dynamics simulations and density functional theory calculations, the results show that, compared to that of SO₂ or NH₃ alone on the γ-Al₂O₃ surface, the increased level of formation of sulfate and ammonium can be attributed to the promoted activity of the surface-bridged hydroxyl with the coexistence of SO₂ and NH₃. In the specific mechanism, the O and H of the surface-bridged hydroxyl group are attacked by the adjacent SO₂ and NH₃, respectively, which directly enhances the formation of absorbed sulfite and ammonium, and indirectly facilitates the production of sulfate by oxidation of atmospheric O₂. The proposed mechanisms can be broadly applied to other aluminum-based suspended dust particles, such as kaolinite, montmorillonite, and clay dust.

Development of γ-Al2O3 with oxygen vacancies induced by amorphous structures for photocatalytic reduction of CO2

Inducing amorphous components into Al₂O₃ leads to elongation of the Al-O bond and the formation of oxygen vacancies, which makes Al₂O₃ an independent photocatalyst for CO₂ adsorption and reduction. The generation rate of CO can reach 36.5 μmol g^-1 h^-1, which is 6.5 times that of P25 TiO₂.

Facile Synthesis of Porous g-C3N4 with Enhanced Visible-Light Photoactivity

Porous graphitic carbon nitride (g-C₃N₄) was prepared by dicyandiamide and urea via the pyrolysis method, which possessed enhanced visible-light-driven photocatalytic performance. Its surface area was increased from 17.12 to 48.00 m²/g. The porous structure not only enhanced the light capture capacity, but also accelerated the mass transfer ability. The Di (Dicyandiamide)/Ur (Urea) composite possessed better photocatalytic activity for Rhodamine B in visible light than that of g-C₃N₄. Moreover, the Di/Ur-4:5 composite showed the best photoactivity, which was almost 5.8 times that of g-C₃N₄. The enhanced photocatalytic activity showed that holes and superoxide radical played a key role in the process of photodegradation, which was ascribed to the enhanced separation of photogenerated carriers. The efficient separation of photogenerated electron-hole pairs may be owing to the higher surface area, O dopant, and pore volumes, which can not only improve the trapping opportunities of charge carriers but also the retarded charge carrier recombination. Therefore, it is expected that the composite would be a promising candidate material for organic pollutant degradation.

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)-Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4-metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4-metal-oxide-based heterojunctions.

The synergistic effect of PMS activation by LaCoO3/g-C3N4 for degradation of tetracycline hydrochloride: performance, mechanism and phytotoxicity evaluation

A LaCoO3/g-C3N4 catalyst with high stability was designed and used for PMS activation to degrade TC.

Degradation of hexavalent chromium and methyl orange by the synergistic system of graphitic carbon nitride and electron beam irradiation

Hexavalent chromium (Cr(VI)) and methyl orange (MO) are highly toxic and difficult to treat. Electron beam irradiation (EB) can produce ·OH, H·, ·O₂^-, hydrated electron (e_aq^-) and other active substances, which have strong redox ability to pollutants. However, the penetration capacity of EB is limited (the penetration depth of water is 10 cm). Therefore, the photocatalytic method of graphitic carbon nitride (CN) was used as the synergistic method of EB in this project to degrade Cr(VI) and MO. The results showed that the maximum treatment efficiency of 100 mg L^-1 Cr(VI) and 50 mg L^-1 MO with liquid surface height of 5 cm was 95.0% and 99.1%, respectively, which was much higher than that of single photocatalytic method (39.5%, 23.4%) and EB (79.6%, 92.1%), and the efficiency of synergistic treatment was higher under acidic condition. When the liquid depth increased to 30 cm, the efficiency of synergistic system decreased by 14.7% and 15.2% for the degradation of Cr(VI) and MO, respectively, less than the single EB treatment (47.2%, 45.7%). Additionally, the performance of the morphology, the light absorption performance, and the separation of photogenerated electron-hole pairs of the CN were evaluated before and after the synergistic system. Lastly, the mechanism illustrates that the electron and thermal effects of EB, e_aq^-, photogenerated electrons played key roles for the Cr(VI) reduction, and the electron and thermal effects of EB, ·O₂^-, photogenerated holes played key roles for the MO degradation. This study provides a new opportunity for the synergistic system of photocatalyst and EB in the treatment of pollutants.

An Interface Optimization Strategy for g-C3N4-Based S-Scheme Heterojunction Photocatalysts

Graphitic carbon nitride (CN) has attracted much attention in photocatalytic fields due to its unique electronic band structure. However, the rapid recombination of photogenerated carriers severely inhibits its catalytic activity. The heterojunction structure has been widely confirmed to significantly improve the photocatalytic activity of CN through the formed interface structure. However, researchers often give attention to the band matching and conductivity of the cocatalyst, while the importance of the interface as a migration channel for photogenerated carriers is often overlooked. In this work, we adopt the strategy of morphology engineering to regulate the morphology of the CN photoactive component so as to achieve the interface optimization of the traditional heterojunction structure. The photocatalytic degradation experiment of rhodamine B shows that compared with the traditional CeO₂@CN heterojunction structure, the photocatalytic activity of the interface-optimized CeO₂/CN is increased by more than 20%. The following points could be used to explain the improvement of photocatalytic activity: (I) the formed S-scheme heterojunction structure, which inhibits the recombination of useful electrons and holes but expedites the recombination of relatively useless electrons and holes, (II) the increased interface area, which provides more carrier migration channels, and (III) the reduced interface contact resistance, which facilitates the separation and migration of photogenerated carriers. Furthermore, the interface optimization of the traditional Al₂O₃@CN and Fe₂O₃@CN heterojunction structures also achieved consistent results. This shows that the strategy in this work is a universal method for interface optimization, which provides potential alternative for further improving the catalytic activity of other heterojunction composites.

Dark formation of reactive oxygen species by bifunctional copper doped sodium bismuthate: Direct oxidation vs catalytic oxidation of organic pollutants

Sustained generation of reactive oxygen species for aquatic decontamination is desired, but the strategies aiming at this goal usually involve tremendous input of chemicals or energy, which for practical purpose have hindered their implementation. Here we propose a very simple approach for degrading organic pollutants based on copper doped sodium bismuthate (CSB), in which reactive oxygen species can be continuously generated requiring no irradiation or other chemicals. The material was easily prepared by coprecipitation of NaBiO₃·nH₂O and Cu(NO₃)₂. Two stages of cyclic degradation of organic pollutant in sequence by the same CSB powder, alone with series of characterization measurements and control experiments were designed. CSB mediated reaction proceeds via two distinct mechanisms viz. direct oxidation and catalytic oxidation, each involving different primary reactive species and resulting in different product profiles. Direct oxidation occurs accompanied by the structural transformation of CSB involving singlet oxygen, originated from lattice oxygen, as the responsible species, while catalytic oxidation employs dissolved oxygen to primarily yield superoxide radical owing to the presence of oxygen vacancy. Our findings provide novel insights into the direct and catalytic oxidative activity of CSB, and suggest a based-on approach for simple, efficient and sustained generation of reactive species for water treatment.

Design of 3D alumina-doped magnesium oxide aerogels with a high efficiency removal of uranium(vi) from wastewater

3D alumina-doped magnesium oxide (Al₂O₃/MgO) aerogels with remarkable adsorption properties for U(vi) were prepared via a simple lyophilization–calcination method.

The preparation of Al2O3/g-C3N4 composites in aluminum–water self-assembly system and its improved photocatalytic properties

The aluminum alloy is used as the aluminum source, together with melamine and cyanuric acid, in a water reaction system to obtain the precursor of Al2O3/g-C3N4 through self-assembly in one step, and then calcined to obtain the Al2O3/g-C3N4 composite photocatalytic material.

Recent advances in surface and interface design of photocatalysts for the degradation of volatile organic compounds

Photocatalysis has attracted wide attention in eliminating volatile organic compounds (VOCs). This paper pays attention to the relationship between structure and performance of photocatalysts based on the fact that catalytic reactions arise on the surface of catalysts and the interface structure of photocatalysts plays key role in transfer efficiency of charges carriers. This review summarizes various surface/interface designs including unsaturated coordination such as oxygen vacancies, surface halogenations, and heterojunctions, homojunctions, facets, etc., as well as the application in photocatalytic degradation of VOCs. This paper reviews the influence of surface and interface properties of materials on VOCs molecules, effective strategies to promote the decomposition of VOCs from the perspectives of VOCs activation, reaction barrier etc., and presents various methods of photocatalyst design appropriately. The degradation path of highly toxic benzene VOCs are also summarized. In addition, the possible problems and suggestions for photocatalytic degradation of VOCs are proposed.

The Preparation of Amorphous Aluminum Oxide Modified g-C3N4 to Improve Photocatalytic Performance in Contaminant Degradation Applications

For the first time, aluminum alloy was used as the main source to prepare aluminum oxide-modified carbon nitride with a melamine–cyanuric acid supramolecular complex. The introduction of amorphous aluminum oxide confers macroporosity to the skeletons of g-C3N4-AlOx. Its surface area increased to 75.5 m2g−1, about 1.5 times that of single g-C3N4. After modification, the visible light response range was expanded, especially at 450~500 nm, while the band structure could be adjusted. Compared with g-C3N4, g-C3N4-AlOx has better photocatalytic performance, the adsorption rate for the dye rhodamine B (RhB) is about 2.1 times that of g-C3N4, and the RhB removal rate is 1.2 times that of g-C3N4.

Promoting the photogeneration of hydrochar reactive oxygen species based on FeAl layered double hydroxide for diethyl phthalate degradation

Improving the photocatalytic capacity of hydrochar to apply in wastewater treatment is of great significance. In this study, a novel heterogeneous photocatalytic material was prepared by compounding hydrochar with FeAl layered double hydroxide (FeAl-LDH). Furthermore, hydrochar was separated into hydrochar carbon matrix (HCM) and dissolved organic matter (DOM) to analyse their contribution in the reactive oxygen species (ROS) generation. The characterization and photocatalytic property of three composites (hydrochar-LDH, HCM-LDH and DOM-LDH) were investigated. The results showed that three composites were successfully synthesized with the formation of nano-sized LDH, graphitic carbon and oxygen vacancies. Persistent free radicals (PFRs) existed in hydrochar and the amount of them increased distinctly with the presence of FeAl-LDH. The degradation efficiency of DEP by hydrochar-LDH, HCM-LDH and DOM-LDH was 5.0, 4.2 and 1.5 times than that of hydrochar within 180 min, respectively. The reasons were proposed as: (i) Both HCM-LDH and DOM-LDH could induce the formation of OH, O₂^- and ¹O₂, while HCM-LDH was the main contributor to generate O₂^- and OH; (ii) HCM-LDH possessed many oxygenated functional groups, which were key factors affecting the formation of ROS; (iii) Fe could enhance the electron transfer process during the photoreaction, promoting the formation of ROS.

Photocatalytic Applications of Heterostructure Graphitic Carbon Nitride: Pollutant Degradation, Hydrogen Gas Production (water splitting), and CO2 Reduction

Fabrication of the heterojunction composites photocatalyst has attained much attention for solar energy conversion due to their high optimization of reduction-oxidation potential as a result of effective separation of photogenerated electrons-holes pairs. In this review, the background of photocatalysis, mechanism of photocatalysis, and the several researches on the heterostructure graphitic carbon nitride (g-C3N4) semiconductor are discussed. The advantages of the heterostructure g-C3N4 over their precursors are also discussed. The conclusion and future perspectives on this emerging research direction are given. This paper gives a useful knowledge on the heterostructure g-C3N4 and their photocatalytic mechanisms and applications. IMPACT STATEMENTS: The paper on g-C3N4 Nano-based photocatalysts is expected to enlighten scientists on precise management and evaluating the environment, which may merit prospect research into developing suitable mechanism for energy, wastewater treatment and environmental purification.

Accurate K-edge X-ray photoelectron and absorption spectra of g-C3N4 nanosheets by first-principles simulations and reinterpretations

Accurate N1s and C1s XPS spectra of g-C₃N₄ were obtained by a combined cluster-periodic approach and we make new assignments.