Poly (vinyl alcohol)/gum karaya electrospun plasma treated membrane for the removal of nanoparticles (Au, Ag, Pt, CuO and Fe3O4) from aqueous solutions

Ammonia hydroxide and citric acid modified wheat straw-biochars: Preparation, characterization, and environmental applications

This study presents an assessment of inorganic and organic modification of biochar on physicochemical properties, dissolved organic carbon (DOC) release, sorption efficiency towards enrofloxacin (E) and silver nanoparticles (Ag-NPs), as well as an evaluation of addition of prepared materials on hydro-physical properties and adsorption capacity of montmorillonite (M). The biochar was derived from wheat straw at 650 °C. An inorganic modification was performed using ammonia hydroxide, whereas an organic modification, using citric acid. The ammonia hydroxide and citric acid changed the biochar nature and surface chemistry by introducing amino and ester groups. The lowest DOC release was from ammonia-biochar (BCN) and the highest, from citric acid-biochar (BCC). The adsorption data were better described by pseudo-II order equation and Marczewski-Jaroniec isotherm. Results showed that BCN exhibited the highest efficiency in adsorption of E and Ag-NPs. It also improved the adsorptive abilities and saturated hydraulic conductivity of M. This provides the chemically modified biochars have an excellent potential to improve pollution removal from aqueous media and hydro-physical/sorption properties of soil sorption complex. They can be used with advantageous in environmental applications.

Natural gums and their derivatives based hydrogels: in biomedical, environment, agriculture, and food industry

The hydrogels based on natural gums and chemically derivatized natural gums have great interest in pharmaceutical, food, cosmetics, and environmental remediation, due to their: economic viability, sustainability, nontoxicity, biodegradability, and biocompatibility. Since these natural gems are from plants, microorganisms, and seaweeds, they offer a great opportunity to chemically derivatize and modify into novel, innovative biomaterials as scaffolds for tissue engineering and drug delivery. Derivatization improves swelling properties, thereby developing interest in agriculture and separating technologies. This review highlights the work done over the past three and a half decades and the possibility of developing novel materials and technologies in a cost-effective and sustainable manner. This review has compiled various natural gums, their source, chemical composition, and chemically derivatized gums, various methods to synthesize hydrogel, and their applications in biomedical, food and agriculture, textile, cosmetics, water purification, remediation, and separation fields.

Adsorptive removal of Ag/Au quantum dots onto covalent organic frameworks@magnetic zeolite@arabic gum hydrogel and their catalytic microwave-Fenton oxidative degradation of Rifampicin antibiotic

Recent progress in nanotechnology via incorporation of small particle size as quantum dots (QDs) (1-10 nm) in many industrial activities and commercial products has led to significant undesired environmental impacts. Therefore, QDs removal from wastewater represents an interesting research topic with a lot of challenges for scientists and engineers nowadays. In this work, the coagulative removal of metal quantum dots as silver and gold from industrial water samples is explored. A novel biosorbent was assembled via binding of covalent organic frameworks (COFs) with magnetic zeolite and Arabic gum hydrogel (COFs@MagZ@AGH) as a promising removal material for Ag-QDs and Au-QDs. This was fully characterized by EDX, SEM, TEM, FT-IR, XPS, XRD and surface area and applied in coagulative removal of Au-QDs and Ag-QDs in presence of several experimental factors as pH, presence of other electrolytes, stirring time, initial QDs concentration, coagulant dosage, and temperature in order to optimize the removal processes. At optimum conditions, COFs@MagZ@AGH was able to recover 99.19% and 87.57% of Ag-QDs and Au-QDs QDs, respectively via chemical adsorption mechanism with perfect fitting to pseudo-second order model. Reuse of the recovered Ag/Au-QDs@COFs@MagZ@AGH as efficient catalysts in catalytic degradation of Rifampicin antibiotic (Rf) from water was additionally investigated and optimized via microwave-Fenton catalysts with excellent oxidative degradation efficiency (100%). Reusability and applicability of the biosorbent (COFs@MagZ@AGH) and catalysts (Ag/Au-QDs@COFs@MagZ@AGH) in real industrial water samples were also explored and successfully accomplished.

Recent developments in the removal of metal-based engineered nanoparticles from the aquatic environments by adsorption

Nowadays, metal-based engineered nanoparticles (m-ENPs) are ubiquitous in aquatic environments for their wide applications in all walks of life. m-ENPs have been demonstrated to exert ecotoxicity, cytotoxicity and genotoxicity towards organisms and even humans. Therefore, the removal of m-ENPs from water has recently become a hot global concerned issue. Adsorption is widely investigated for this purpose, owing to its advantages of low cost, easy operation, high removal efficiency and potential recycling use of both the adsorbents and adsorbates. As the adsorption and related technologies were hardly comprehensively overviewed for the removal of m-ENPs, herein, the present review particularly focuses on this topic. The fundamentals to the technology, including adsorption isotherm, adsorption dynamics, the adsorption process with the special emphasis on the relationship between surface area and porosity of the adsorbent and the adsorption capacity, etc., are fully discussed. As the kernel of the adsorption method, adsorbents with diversified chemical and physical properties in different types are comprehensively elaborated. The primary factors affecting the adsorption, and adsorption mechanisms are well summarized. Particularly, the regeneration of the adsorbents and the reuse of adsorbed m-ENPs are highlighted for the sustainability. Finally, challenges and prospects in this field are outlined. Overall, this review aims to provide valuable references for the development of new adsorbents with more efficient and practical applications to remove m-ENPs and direct the future study.

Adsorption behavior of silver quantum dots by a novel super magnetic CoFe2O4-biochar-polymeric nanocomposite

Recent industrial development and research progress in nanotechnology have led to the release of a number of nanomaterials with particle sizes (1-10 nm) which are categorized as quantum dots (QDs) in aquatic system. Disposal away of such QDs will cause potential pollution to the environment. Therefore, removal of disposed QDs from wastewater represents a challenging research subject for scientists and engineers. Hence, the objective of this study is devoted to assess the process of coagulative removal of silver quantum dots (Ag-QDs), as an example, from water by a novel super magnetic nanocomposite. Such material was aimed to prepare from the chemical combination and reaction of a generated Citrus sinensis and Citrus reticulata peels biochar (SMCsr-B) with spinel cobalt ferrite (CoFe₂O₄) as a super-magnetic source. The produced (SMCsr-B) was then crosslinked with polyurea-formaldehyde polymer (PUF) using EDA in only two minutes via microwave irradiation to produce (SMCsr-B/PUF). The SEM, EDX, FT-IR, XRD, and XPS analyses of the assembled (SMCsr-B/PUF) nanocomposite were acquired to confirm surface morphology and chemical structure. Controlling experimental factors were investigated as pH, time, and Ag-QDs pollutant concentration using microwave irradiative removal technique to establish the efficiency of coagulative adsorption of Ag-QDs onto (SMCsr-B/PUF). The solution (pH 5) was proved to exhibit the higher removal percentages of Ag-QDs in 15-25 s. SMCsr-B/PUF nanocomposite exhibited high removal efficiency as 93.12%, 92.39% and 92.48% upon using 20, 40 and 60 mg L^-1 of Ag-QDs, respectively in presence of 10 mM NaCl. The kinetic and equilibrium adsorption data were best fitted to Freundlich model. The prepared SMCsr-B/PUF was successfully utilized as an efficient super magnetic nanocomposite for removal and recovery of Ag-QDs from aqueous environment.

Plasma-enhanced modification of polysaccharides for wastewater treatment: A review

In this work, novel polysaccharide-based sorbents modified with plasma technologies are discussed. Plasma selectively modifies the surface properties by generating specific moieties, enhancing adsorption performance, and the physical-chemical properties of the material without modifying its bulk properties. Among plasma technologies, cold plasma is more suitable and energy-efficient, since thermal-sensitive materials could be modified using this technology. Besides, atmospheric-pressure plasma systems possess the required features to scale-up plasma technologies for surface modification of sorbents. Moreover, a big challenge is the semi-continuous operation to modify sorbents as it would decrease overall process costs. Due to its low-cost and extensive availability, polysaccharide-based sorbents are promising substrates for plasma-enhanced modification to develop highly efficient adsorbents. The development of polysaccharide-based materials includes modified cellulose, chitosan, or lignocellulosic materials with functionalities that increase adsorption capacity and selectivity towards a specific organic or inorganic pollutant.

An Overview of Biopolymeric Electrospun Nanofibers Based on Polysaccharides for Wound Healing Management

Currently, despite the thoroughgoing scientific research carried out in the area of wound healing management, the treatment of skin injuries, regardless of etiology remains a big provocation for health care professionals. An optimal wound dressing should be nontoxic, non-adherent, non-allergenic, should also maintain a humid medium at the wound interfacing, and be easily removed without trauma. For the development of functional and bioactive dressings, they must meet different conditions such as: The ability to remove excess exudates, to allow gaseous interchange, to behave as a barrier to microbes and to external physical or chemical aggressions, and at the same time to have the capacity of promoting the process of healing by stimulating other intricate processes such as differentiation, cell adhesion, and proliferation. Over the past several years, various types of wound dressings including hydrogels, hydrocolloids, films, foams, sponges, and micro/nanofibers have been formulated, and among them, the electrospun nanofibrous mats received an increased interest from researchers due to the numerous advantages and their intrinsic properties. The drug-embedded nanofibers are the potential candidates for wound dressing application by virtue of: Superior surface area-to volume ratio, enormous porosity (can allow oxy-permeability) or reticular nano-porosity (can inhibit the microorganisms'adhesion), structural similitude to the skin extracellular matrix, and progressive electrospinning methodology, which promotes a prolonged drug release. The reason that we chose to review the formulation of electrospun nanofibers based on polysaccharides as dressings useful in wound healing was based on the ever-growing research in this field, research that highlighted many advantages of the nanofibrillary network, but also a marked versatility in terms of numerous active substances that can be incorporated for rapid and infection-free tissue regeneration. In this review, we have extensively discussed the recent advancements performed on electrospun nanofibers (eNFs) formulation methodology as wound dressings, and we focused as well on the entrapment of different active biomolecules that have been incorporated on polysaccharides-based nanofibers, highlighting those bioagents capable of improving the healing process. In addition, in vivo tests performed to support their increased efficacy were also listed, and the advantages of the polysaccharide nanofiber-based wound dressings compared to the traditional ones were emphasized.

Removal and recovery of silver nanoparticles by hierarchical mesoporous calcite: Performance, mechanism, and sustainable application

The widespread use of silver nanoparticles (AgNPs) inevitably leads to the environmental release of AgNPs. The released AgNPs can pose ecological risks because of their specific toxicity. However, they can also be used as secondary sources of silver metal. Herein, hierarchical mesoporous calcite (HMC) was prepared and used to remove and recover AgNPs from an aqueous solution. The batch experiments show that the HMC has high removal percentages for polyvinylpyrrolidone- and poly (vinyl alcohol)-coated AgNPs (PVP- and PVA-AgNPs) over a wide pH range of 6-10. The adsorption isotherms indicate that the maximum removal capacities are 55 and 19 mg g^-1 for PVP-AgNPs and PVA-AgNPs, respectively, corresponding to partition coefficients (PCs) of 0.55 and 0.77 mg g^-1 μM^-1. Furthermore, the removal performance is also not impaired by coexisting anions, such as Cl^-, NO₃^-, SO₄^2-, and CO₃^2-. Their removal mechanisms can be ascribed to the electrostatic attraction and chemical adsorption between the HMC and polymer-coated AgNPs. Calcium ions on the HMC surface serve as active sites for coordination with the oxygen-bearing functional groups of AgNP coatings. Moreover, the AgNPs adsorbed onto HMC show high catalytic activity and good reusability for the reduction of the organic pollutant 4-nitrophenol. This work may pave the way not only to remove metal nanopollutants from waters but also to convert them into functional materials.

Electrospun fibers based on carbohydrate gum polymers and their multifaceted applications

Electrospinning has garnered significant attention in view of its many advantages such as feasibility for various polymers, scalability required for mass production, and ease of processing. Extensive studies have been devoted to the use of electrospinning to fabricate various electrospun nanofibers derived from carbohydrate gum polymers in combination with synthetic polymers and/or additives of inorganic or organic materials with gums. In view of the versatility and the widespread choice of precursors that can be deployed for electrospinning, various gums from both, the plants and microbial-based gum carbohydrates are holistically and/or partially included in the electrospinning solution for the preparation of functional composite nanofibers. Moreover, our strategy encompasses a combination of natural gums with other polymers/inorganic or nanoparticles to ensue distinct properties. This early established milestone in functional carbohydrate gum polymer-based composite nanofibers may be deployed by specialized researchers in the field of nanoscience and technology, and especially for exploiting electrospinning of natural gums composites for diverse applications.

Microfiltration Membranes Modified with Silver Oxide by Plasma Treatment

Microfiltration (MF) membranes have been widely used for the separation and concentration of various components in food processing, biotechnology and wastewater treatment. The deposition of components from the feed solution and accumulation of bacteria on the surface and in the membrane matrix greatly reduce the effectiveness of MF. This is due to a decrease in the separation efficiency of the membrane, which contributes to a significant increase in operating costs and the cost of exploitative parts. In recent years, significant interest has arisen in the field of membrane modifications to make their surfaces resistant to the deposition of components from the feed solution and the accumulation of bacteria. The aim of this work was to develop appropriate process parameters for the plasma surface deposition of silver oxide (AgO) on MF polyamide membranes, which enables the fabrication of filtration materials with high permeability and antibacterial properties.

Hierarchically porous poly(ethylenimine) modified poly(styrene-co-divinylbenzene) microspheres for the adsorption of gold nanoparticles and simultaneously being transformed as the nanoparticles immobilized catalyst

With the extensive applications of gold nanoparticles (AuNPs) and the confirmation of their toxicity on human health and environment, it was urgent to remove AuNPs from environment. The hierarchically porous poly(ethylenimine) modified poly(styrene-co-divinylbenzene) microsphere (PEI-PS-DVB) was prepared and characterized by scanning electron microscopy, X-ray diffraction, transform infrared spectrometry, energy dispersive X-ray spectrometry, elemental analysis, contact angle, zeta potential analysis, N₂ adsorption-desorption and mercury intrusion porosimetry. PEI-PS-DVB possessed abundant flow-through pores (70-120 nm) and meso/micropores (<50 nm); the former pores enabled full availability of the adsorbent to relatively large adsorbate, i.e. AuNPs, with fast mass transfer, while the latter ones ensured large surface area for high adsorption capacity. Thanks to its plentiful nitrogen and special hierarchical pores, PEI-PS-DVB was suitable for the adsorption of AuNPs by electrostatic interaction and special affinity between nitrogen and Au. The adsorption obeyed the pseudo-first-order kinetic and Langmuir isotherm models. The maximum adsorption capacity based on Langmuir model was 806.5 mg/g. Moreover, PEI-PS-DVB adsorbing AuNPs could be the efficient catalyst for the reduction of 4-nitrophenol with satisfactory reusability. The developed hierarchically porous PEI-PS-DVB was a promising adsorbent for AuNPs with high adsorption capacity, and recycling usage of waste AuNPs conformed to the green and sustainable concept.

In Situ Polyphosphate Nanoparticle Formation in Hybrid Poly(vinyl alcohol)/Karaya Gum Hydrogels: A Porous Scaffold Inducing Infiltration of Mesenchymal Stem Cells

The preparation and characterization of a porous hybrid cryogel based on the two organic polymers, poly(vinyl alcohol) (PVA) and karaya gum (KG), into which polyphosphate (polyP) nanoparticles have been incorporated, are described. The PVA/KG cryogel is prepared by intermolecular cross-linking of PVA via freeze-thawing and Ca2+-mediated ionic gelation of KG to form stable salt bridges. The incorporation of polyP as amorphous nanoparticles with Ca2+ ions (Ca-polyP-NP) is achieved using an in situ approach. The polyP constituent does not significantly affect the viscoelastic properties of the PVA/KG cryogel that are comparable to natural soft tissue. The exposure of the Ca-polyP-NP within the cryogel to medium/serum allows the formation of a biologically active polyP coacervate/protein matrix that stimulates the growth of human mesenchymal stem cells in vitro and provides the cells a suitable matrix for infiltration superior to the polyP-free cryogel. In vivo biocompatibility studies in rats reveal that already two to four weeks after implantation into muscle, the implant regions containing the polyP-KG/PVA material become replaced by initial granulation tissue, whereas the controls are free of any cells. It is proposed that the polyP-KG/PVA cryogel has the potential to become a promising implant material for soft tissue engineering/repair.

Tree gum-based renewable materials: Sustainable applications in nanotechnology, biomedical and environmental fields

The prospective uses of tree gum polysaccharides and their nanostructures in various aspects of food, water, energy, biotechnology, environment and medicine industries, have garnered a great deal of attention recently. In addition to extensive applications of tree gums in food, there are substantial non-food applications of these commercial gums, which have gained widespread attention due to their availability, structural diversity and remarkable properties as 'green' bio-based renewable materials. Tree gums are obtainable as natural polysaccharides from various tree genera possessing exceptional properties, including their renewable, biocompatible, biodegradable, and non-toxic nature and their ability to undergo easy chemical modifications. This review focuses on non-food applications of several important commercially available gums (arabic, karaya, tragacanth, ghatti and kondagogu) for the greener synthesis and stabilization of metal/metal oxide NPs, production of electrospun fibers, environmental bioremediation, bio-catalysis, biosensors, coordination complexes of metal-hydrogels, and for antimicrobial and biomedical applications. Furthermore, polysaccharides acquired from botanical, seaweed, animal, and microbial origins are briefly compared with the characteristics of tree gum exudates.

Green Synthesis of Metal and Metal Oxide Nanoparticles and Their Effect on the Unicellular Alga Chlamydomonas reinhardtii

Recently, the green synthesis of metal nanoparticles has attracted wide attention due to its feasibility and very low environmental impact. This approach was applied in this study to synthesise nanoscale gold (Au), platinum (Pt), palladium (Pd), silver (Ag) and copper oxide (CuO) materials in simple aqueous media using the natural polymer gum karaya as a reducing and stabilising agent. The nanoparticles' (NPs) zeta-potential, stability and size were characterised by Zetasizer Nano, UV-Vis spectroscopy and by electron microscopy. Moreover, the biological effect of the NPs (concentration range 1.0-20.0 mg/L) on a unicellular green alga (Chlamydomonas reinhardtii) was investigated by assessing algal growth, membrane integrity, oxidative stress, chlorophyll (Chl) fluorescence and photosystem II photosynthetic efficiency. The resulting NPs had a mean size of 42 (Au), 12 (Pt), 1.5 (Pd), 5 (Ag) and 180 (CuO) nm and showed high stability over 6 months. At concentrations of 5 mg/L, Au and Pt NPs only slightly reduced algal growth, while Pd, Ag and CuO NPs completely inhibited growth. Ag, Pd and CuO NPs showed strong biocidal properties and can be used for algae prevention in swimming pools (CuO) or in other antimicrobial applications (Pd, Ag), whereas Au and Pt lack these properties and can be ranked as harmless to green alga.

Nitrogen rich core-shell magnetic mesoporous silica as an effective adsorbent for removal of silver nanoparticles from water

The production and increasing use of silver nanoparticles (AgNPs) obviously results in their release into the environment, leading to a risk to the environment due to their toxic effects. Thus, the removal of AgNPs from water is highly needed. Here, we demonstrate that nitrogen rich (∼10% nitrogen content) core-shell magnetic mesoporous silica is a promising adsorbent for the removal of AgNPs. For this, the poly(ethylenimine) functionalized core-shell magnetic mesoporous silica composites (Fe₃O₄@SiO₂-PEI) were prepared, and characterized by TEM, FT-IR, XRD, TG and N₂ adsorption-desorption. The removal of AgNPs by Fe₃O₄@SiO₂-PEI as a function of contact time, concentration of AgNPs, solution pH and ionic strength were studied. The adsorption kinetic data could be described by the pseudo-second-order rate model. Both Langmuir and Freundlich models fitted the adsorption data well. The adsorption capacity for AgNPs is 909.1mg/g, which is 5-181 times higher than that of the previously reported adsorbents for AgNPs. Interestingly, the silver adsorbed onto Fe₃O₄@SiO₂-PEI exhibits highly catalytic activity for 4-nitropheol (4-NP) reduction with a rate constant of 0.072min^-1, which is much higher than those by other AgNPs reported before. The silver-loaded Fe₃O₄@SiO₂-PEI promises good recyclability for at least five cycles, showing great potential in practical applications.

Removal of silver nanoparticles by mussel-inspired Fe3O4@ polydopamine core-shell microspheres and its use as efficient catalyst for methylene blue reduction

The removal of silver nanoparticles (AgNPs) from water is highly needed because of their increasing use and potential risk to the environment due to their toxic effects. Catalysis over AgNPs has received significant attention because of their highly catalytic performance. However, their use in practical applications is limited due to high cost and limited resources. Here, we present for the first time that the mussel-inspired Fe3O4@polydopamine (Fe3O4@PDA) nanocomposite can be used for efficient removal and recovery of AgNPs. Adsorption of AgNPs over Fe3O4@PDA was confirmed by TEM, FT-IR, XRD, TGA and magnetic property. The adsorption efficiency of AgNPs by Fe3O4@PDA was investigated as a function of pH, contact time, ionic strength and concentration of AgNPs. The kinetic data were well fitted to a pseudo-second order kinetic model. The isotherm data were well described by Langmuir model with a maximum adsorption capacity of 169.5 mg/g, which was higher than those by other adsorbents. Notably, the obtained AgNPs-Fe3O4@PDA exhibited highly catalytic activity for methylene blue reduction by NaBH4 with a rate constant of 1.44 × 10-3/s, which was much higher than those by other AgNPs catalysts. The AgNPs-Fe3O4@PDA promised good recyclability for at least 8 cycles and acid resistant with good stability.

Gum karaya (Sterculia urens) stabilized zero-valent iron nanoparticles: characterization and applications for the removal of chromium and volatile organic pollutants from water

This paper illustrates a method for the stabilization of nanoscale zerovalent iron (NZVI) suspensions with a “green” biopolymer, Gum Karaya (GK).

Fabrication of electrospun almond gum/PVA nanofibers as a thermostable delivery system for vanillin

In this study, the fabrication of vanillin incorporated almond gum/polyvinyl alcohol (PVA) nanofibers through electrospinning has been investigated. Electrospinning of only almond gum was proved impossible. It was found that the aqueous solution of almond gum/PVA (80:20, concentration=7% (w/w)) containing 3% (w/w) vanillin could have successfully electrospun to uniform nanofibers with diameters as low as 77nm. According to the thermal analysis, incorporated vanillin in almond gum/PVA nanofibers showed higher thermal stability than free vanillin, making this composite especially suitable for high temperature applications. XRD and FTIR analyses proved the presence of vanillin in the almond gum/PVA nanofibers. It was also found that vanillin was dispersed as big crystallites in the matrix of almond gum/PVA nanofibers. FTIR analysis showed almond gum and PVA had chemical cross-linking by etheric bonds between COH groups of almond gum and OH groups of PVA. Also, in the nanofibers, there were no major interaction between vanillin and either almond gum or PVA.

Electrospun fibers based on Arabic, karaya and kondagogu gums

Nanofibers of natural tree polysaccharides based on three gums namely Arabic (GA), karaya (GK) and kondagogu (KG) have been prepared for the first time using electrospinning. Electrospinning solutions were prepared by mixing gum solutions of GA, GK & KG with eco-friendly polymers such as polyvinyl alcohol (PVA) or polyethylene oxide (PEO). The present study focuses on the effect of electrospinning blended solutions of GA, GK or KG with PVA or PEO, additives which influence system parameters and process parameters. This has important effects on the electrospinning process and the resulting fibers whose morphology and physicochemical properties were evaluated. The mass ratios of 70:30 to 90:10 for PVA: GA, PVA: GK and PVA: KG were observed to establish an optimum blend solution ratio in order to fabricate uniform beadless nanofibers with an average diameter of 240±50, 220±40 and 210±30nm, respectively. Various structural and physicochemical properties of the electrospun fibers were investigated. Furthermore, the comparisons of various functionalities of the untreated and plasma treated electrospun fibers were assessed. The methane plasma treated nanofibers were shown to be of extremely specific surface area, improved water contact angle, high surface porosity and roughness and superior hydrophobic properties compared to untreated fibers.

Polyacrylonitrile-based fiber modified with thiosemicarbazide by microwave irradiation and its adsorption behavior for Cd(II) and Pb(II)

A novel thiosemicarbazide modified adsorbent (PAN(MW)-TSC) based on polyacrylonitrile fiber was successfully synthesized under microwave irradiation, which was applied for the uptake of Cd(II) and Pb(II) from aqueous solution subsequently. Microwave irradiation method is a new approach to achieve the modification and it turns out that just a 30min process is enough for the anchoring of functional groups in the fiber matrix. The surface characterization was performed by fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) elemental analysis (EA) and thermogravimetric analysis (TGA), indicating that the modification was successfully accomplished. Batch adsorption experiments including equilibrium isotherms, kinetics and the effects of pH and temperature on the adsorption of Cd(II) and Pb(II) were systematically studied. Among three kinetic models, the pseudo-second-order kinetic model provides the best correlation for the process. The nonlinear resolution of the Langmuir isotherm equation has been found to show the closest fit to the equilibrium date. Thermodynamic parameters, involving △G, △H and △S were also calculated from graphical interpretation of the experimental data, which suggest that metal ions adsorption onto PAN(MW)-TSC fibers is spontaneous and exothermic. Regeneration of PAN(MW)-TSC fibers loaded with metal ions was efficiently done with 0.5M HNO3, by which the investigated adsorbent could be used reproductively for five times with a small decrease in sorption capacity. The feasible preparation of PAN(MW)-TSC fibers with high adsorption capacities opens a new perspective in the potential application for wastewater treatment.