Comparison of three combined sequencing batch reactor followed by enhanced Fenton process for an azo dye degradation: Bio-decolorization kinetics study

Anaerobic-aerobic treatment of high-strength and recalcitrant textile dyeing effluents

Eco-friendly treatment of complex textile and dyeing wastewaters poses a pressing environmental concern. An approach adopting different treatment paths and integrated anaerobic-aerobic processes for high-strength and recalcitrant textile dyeing wastewater was examined. The study demonstrated that over 97% of suspended solids (SS) and more than 70% of chemical oxygen demand (COD) were removed by polyaluminum chloride pre-coagulation of suede fabric dyeing stream. Up to 58% of COD and 83% of SS were removed through hydrolysis pretreatment of other low-strength streams. Notable COD removal of up to 99% from a feed of 20,862 mg COD/L was achieved by integrated anaerobic-aerobic treatment of high strength stream. Besides achieving high COD removal of 97%, the anaerobic granular sludge process demonstrated multi-faceted attributes, including high feed loading, smaller footprint, little sludge production, and good stability. The integrated anaerobic-aerobic treatment offers a robust and viable option for highly contaminated and recalcitrant textile dyeing wastewater.

Evaluation of energy and electrode consumption of Acid Red 18 removal using electrocoagulation process through RSM: alternating and direct current

This study aims to evaluate energy and electrode consumption for Acid Red 18 (AR18) removal and the operating costs employing alternating current (AC) and direct current (DC) in an electrocoagulation (EC) system. As the novelty of this study, the effects of AC/DC mode and electrode type were scrutinized through a series of designed experiments in a batch EC reactor to remove a globally used Azo dye from wastewater. In this regard, by designing the experiments with response surface methodology (RSM), four series of 30 experiments were separately conducted employing DC and AC for iron (Fe) and aluminum (Al) electrodes. In each series, quadratic models were achieved for the removal efficiency and operating costs; by confirming the accuracy of the models, two responses were simultaneously optimized accordingly. As a result, the AR18 removal efficiency with Al electrodes had no significant difference using AC and DC (on average 0.2% difference); however, for Fe electrode, the EC performance in DC was more significant than AC (on average 13.8% difference). Also, the operating costs of Fe electrode were more economical in comparison with the Al; on average, the operating costs in the case of applying DC for Fe and Al were achieved 14.6 and 39.8 (US$/kg dye removed), respectively; whereas, for AC, this amount was calculated 9.3 and 36.0 (US$/kg dye removed) for Fe and Al, respectively.

Advanced treatment of chicken farm flushing wastewater by integrating Fenton oxidation and algal cultivation process for algal growth and nutrients removal

Algae based wastewater treatment has been considered as the most promising win-win strategy for nutrients removal and biomass accumulation. However, the poor linking between traditional wastewater treatment and algal cultivation limits the achievement of this goal. In this study, a novel combination of Fenton oxidation and algal cultivation (CFOAC) system was investigated for the treatment of chicken farm flushing wastewater (CFFW). Fenton oxidation (FO) was adopted to reduce the excessive ammonia nitrogen, which might inhibit the algal growth. The results showed that single FO pretreatment removed 70.5 %, 96.7 %, 86.1 %, and 96.2 % of TN, TAN, TP, and COD, respectively. The highest biomass (235.8 mg/L/d) and lipid (77.3 mg/L/d) productivities were achieved on optimized CFOAC system after 7 days batch cultivation. Accordingly, the nutrients removal efficiencies increased to almost 100 %. Further fatty acid profile analysis showed that algae grown on optimal CFOAC system accumulated a high level of total lipids (32.8 %) with C16-C18 fatty acid as the most abundant compositions (accounting for over 60.6 %), which were propitious to biodiesel production. In addition, this CFOAC system was magnified from 1 L flask to 50 L horizontal pipe photobioreactor (HPPB) in semi-continuously culture under optimal conditions. The average biomass and lipid productivities were 995.7 mg/L/d and 320.6 mg/L/d, respectively, when cultured at 6 days hydraulic retention time with 1/3 substitution every two days. These findings proved that the novel CFOAC system is efficient in nutrients removal, algal cultivation, and biomass production for advanced treatment of CFFW.

Blue dye degradation in an aqueous medium by a combined photocatalytic and bacterial biodegradation process

This paper aimed at implementing a treatment system for polluted water with textile dyes, starting with a photocatalytic decomposition process using sunlight as a source of energy and continuing with a bacterial biodegradation process, in order to reach degradation percentages higher than those obtained using only one of the processes mentioned above. When water treatment with the dye in the combined system was over, an acute ecotoxicity test was performed to make sure that toxic metabolites were not produced due to biodegradation. Solophenyl Blue azoic dye, and Erionyl Blue and Terasil Blue anthraquinone dye-colored solutions were treated with the Pd/Al ₈₀ Ce ₁₀ Zr ₁₀ catalyst in a solar collector for the photocatalytic process. On the other hand, the waste dye, which was obtained from photocatalysis with a bacterial consortium from polluted areas by metals and hydrocarbons in aerobic conditions, was inoculated for biodegradation. Biodegradation was obtained for the dyes after both processes as 90.91% for the Solophenyl Blue azoic dye, and 87.80% and 87.94%, respectively, for the Erionyl Blue and Terasil Blue anthraquinone dyes. After the degradation processes, it was proven, via an ecotoxicity test with Daphnia magna , that toxic metabolites had not been produced.

A comprehensive review on the integration of advanced oxidation processes with biodegradation for the treatment of textile wastewater containing azo dyes

The threat of dye contamination has achieved an unsurpassed abnormal state lately due to their massive consumption in several enterprises including textile, leather, cosmetic, plastic, and paper industries. This review focuses on the integrations of various advanced oxidation processes (AOPs), such as Fenton, photocatalysis, and ozonation, with biodegradation for the treatment of textile azo dyes. Such integrations have been explored lately by researchers to bring down the processing cost and improve the degree of mineralization of the treated dyeing wastewater. The review refers to the basic mechanisms, the influence of various process parameters, outcomes of recent works, and future research directions. All the three AOPs, independently, demonstrated substantial color reduction of 54–100%. The ozonation process, stand-alone, showed the most efficient decolorization (of 88–100%) consistently in all reviewed research works. In contrast, all three AOPs independently offered varied and inadequate COD reduction in the range of 16–80%. The AOPs, after getting integrated with biodegradation, yielded an additional reduction (of 11–70%) in the COD-levels and (of 16–80%) in the TOC-levels. Further, the integration of AOPs with biodegradation has potential to significantly reduce the treatment costs. The review suggests further research efforts in the direction of sequencing chemical and biological routes such that their synergistic utilization yield complete detoxification of the textile azo dyes economically at large-scale.

Effective removal of polymer quaternary ammonium salt by biodegradation and a subsequent Fenton oxidation process

In this paper, a process combining biodegradation and Fenton oxidation was proposed for the removal of polydiallyldimethylammonium chloride-acrylic-acrylamide-hydroxyethyl acrylate (PDM) in aqueous phase. Biodegradation of PDM was investigated in activated sludge systems, and the effects of the solution pH, mixed liquid suspended solids (MLSS), salinity, co-substrate, and initial substrate concentration, were studied. The biodegradation process was well-described with the Monod model and the values of the kinetics parameters v_max, k_s were 0.05 h^-1 and 333 mg/L. The optimal biodegradation conditions in the experimental range were determined to be: pH = 7.0, 0%-0.01% (w/v) NaCl, 4000 mg/L of MLSS, and 500 mg/L of glucose as co-substrate. FT-IR analysis indicated that PDM molecules biodegradation partly. The microbial community structures and dehydrogenase activity analysis revealed that PDM showed some toxicity to microorganisms in activated sludge. The effects of several parameters, including the pH and chemical doses, were investigated for removing PDM in Fenton oxidation process. The optimal Fenton oxidation process conditions in the experimental range were pH = 2.0, Fe²⁺ concentration of 40 mg/L, and H₂O₂ dosage of 23 mL/L. PDM was treated by biodegradation and subsequent Fenton oxidation under the optimal operating conditions. The removal efficiency was 44.5% after the biodegradation process and further increased to 85.5% after Fenton oxidation. The combined process was revealed to be a promising solution for achieving effective and economical removal of PDM.

Recent development of advanced biotechnology for wastewater treatment

The importance of highly efficient wastewater treatment is evident from aggravated water crises. With the development of green technology, wastewater treatment is required in an eco-friendly manner. Biotechnology is a promising solution to address this problem, including treatment and monitoring processes. The main directions and differences in biotreatment process are related to the surrounding environmental conditions, biological processes, and the type of microorganisms. It is significant to find suitable biotreatment methods to meet the specific requirements for practical situations. In this review, we first provide a comprehensive overview of optimized biotreatment processes for treating wastewater during different conditions. Both the advantages and disadvantages of these biotechnologies are discussed at length, along with their application scope. Then, we elaborated on recent developments of advanced biosensors (i.e. optical, electrochemical, and other biosensors) for monitoring processes. Finally, we discuss the limitations and perspectives of biological methods and biosensors applied in wastewater treatment. Overall, this review aims to project a rapid developmental path showing a broad vision of recent biotechnologies, applications, challenges, and opportunities for scholars in biotechnological fields for "green" wastewater treatment.

Combined photocatalytic and biological process for textile wastewater treatments

Azo dyes, common in textile wastewater, have high photolytic and chemical stabilities, which make them difficult to be removed using conventional treatments. This study aims to evaluate a combined process using heterogeneous photocatalysis, with ZnO/UV or TiO₂ /UV (0.6 g catalyst L^-1 solution/2-hr UV radiation), and a biological process for textile wastewater treatment. After the proposed treatments, the color and organic matter removals from synthetic wastewater (SW) and industrial wastewater (IW) were evaluated. For SW, the coupled photocatalytic (ZnO/UV or TiO₂ /UV)-biological system promoted a high extent of color removal (98%) and total organic carbon (TOC) reduction (>80%). Promising results were obtained with IW using combined photocatalytic (TiO₂ /UV)-biological treatments, reaching 97% and 63% of color and TOC removal, respectively. This process, coupling heterogeneous photocatalysis and a bioprocess, has proved to be a good alternative for the treatment of textile wastewater, not only for color removal but also for dye mineralization purposes. PRACTITIONER POINTS: A combined process using heterogeneous photocatalysis (ZnO/UV or TiO₂ /UV) and biological process was evaluated for synthetic (SW) and industrial (IW) textile wastewaters treatment. For SW, coupled process promoted high extent of colour and organic matter removals. For IW, promising results were obtained with TiO₂ /UV-biological treatment (97% of colour and 63% of organic matter removals).

Application of response surface methodology in physicochemical removal of dyes from wastewater: A critical review

Response surface methodology (RSM) is a powerful tool in designing the experiments and optimizing different environmental processes. However, when it comes to wastewater treatment and specifically dye-containing wastewater, two questions arise; "Is RSM being used correctly?" and "Are all capabilities of RSM being exploited properly?". The current review paper aims to answer these questions by scrutinizing different physicochemical processes that utilized RSM in dye removal. The literature that applied RSM to adsorption, advanced oxidation processes, coagulation/flocculation and electrocoagulation processes were critically reviewed in this paper. The common errors in applying RSM to physicochemical removal of dyes are identified and some suggestions are made for future studies.

Microwave hydrothermal-assisted preparation of novel spinel-NiFe2O4/natural mineral composites as microwave catalysts for degradation of aquatic organic pollutants

In this study, novel spinel-NiFe₂O₄/natural mineral (sepiolite, diatomite and kaolinite) composites were developed using microwave (MW) hydrothermal method, and applied in MW-induced catalytic degradation (NiFe₂O₄/natural mineral/MW) of organic pollutants such as sodium dodecyl benzene sulfonate (SDBS), azo fuchsine (AF), methyl parathion (MP), and crystal violet (CVL) in solution. Catalytic activities of three NiFe₂O₄/natural mineral composites were compared. The effects of material synthesis process parameters such as molar ratios of NiFe₂O₄ and natural mineral, and pH of precursor solutions for synthesizing catalysts, and degradation parameters such as MW irradiation time and catalyst reuse cycles were also investigated. The principle on NiFe₂O₄/natural mineral/MW degradation was provided. The results reveal that organic pollutants in wastewater can be removed completely using NiFe₂O₄/natural mineral/MW within minutes. NiFe₂O₄/sepiolite shows higher catalytic activity than the others. The calculated degradation rate constants are 1.865, 0.672, 0.472, and 0.329 min^-1 for SDBS, AF, MP, and CVL, respectively, using NiFe₂O₄/sepiolite/MW system. The performance of NiFe₂O₄/natural mineral can be maintained for three reuse cycles. Active species OH, O₂^-, and h⁺ play main roles in NiFe₂O₄/sepiolite/MW degradation. Hence, NiFe₂O₄/sepiolite/MW technology with rapid and cost-effective degradation, magnetic separation, and no secondary pollution, demonstrates to be promising in treating organic contaminants in wastewater.

Spatial variation of electrode position in bioelectrochemical treatment system: Design consideration for azo dye remediation

In the present study, three bio-electrochemical treatment systems (BET) were designed with variations in cathode electrode placement [air exposed (BET1), partially submerged (BET2) and fully submerged (BET3)] to evaluate azo-dye based wastewater treatment at three dye loading concentrations (50, 250 and 500 mg L^-1). Highest dye decolorization (94.5 ± 0.4%) and COD removal (62.2 ± 0.8%) efficiencies were observed in BET3 (fully submerged electrodes) followed by BET1 and BET2, while bioelectrogenic activity was highest in BET1 followed by BET2 and BET3. It was observed that competition among electron acceptors (electrode, dye molecules and intermediates) critically regulated the fate of bio-electrogenesis to be higher in BET1 and dye removal higher in BET3. Maximum half-cell potentials in BET3 depict higher electron acceptance by electrodes utilized for dye degradation. Study infers that spatial positioning of electrodes in BET3 is more suitable towards dye remediation, which can be considered for scaling-up/designing a treatment plant for large-scale industrial applications.

Application of magnetic OMS-2 in sequencing batch reactor for treating dye wastewater as a modulator of microbial community

The potential and mechanism of synthesized magnetic octahedral molecular sieve (Fe₃O₄@OMS-2) nanoparticles in enhancing the aerobic microbial ability of sequencing batch reactor (SBR) for treating dye wastewater have been revealed in this study. The addition of Fe₃O₄@OMS-2 of 0.25g/L enhanced the decolorization of SBRs with an operation cycle of 24h by more than 20%. The 16S rRNA gene high-throughput sequencing indicated Fe₃O₄@OMS-2 increased the microbial richness and diversity of SBRs, and more importantly, promoted the potential dye-degrading bacteria. After a series of enriching and screening, four bacterial strains with the considerable decolorizing ability were isolated from SBRs, designating Alcaligenes faecalis FP-G1, Bacillus aryabhattai FP-F1, Escherichia fergusonii FP-D1 and Rhodococcus ruber FP-E1, respectively. The growth and decolorization of these pure strains were promoted in the presence of Fe₃O₄@OMS-2, which agrees with the result of high-throughput sequencing. Monitoring dissolved Fe/Mn ions and investigating the change of oxidation states of Fe/Mn species discovered OMS-2 composition played the critical role in modulating the microbial community. The significant enhancement of Mn-oxidizing/-reducing bacteria suggested microbial Mn redox may be the key action mechanism of Fe₃O₄@OMS-2, which can provide numerous benefits for the microbial community and decolorization of SBRs.

Combination of Fenton processes and biotreatment for wastewater treatment and soil remediation

There is a continuously increasing worldwide concern for the development of wastewater and contaminated soil treatment technologies. Fenton processes and biological treatments have long been used as common technologies for treating wastewater and polluted soil but they still need to be modified because of some defects (high costs of Fenton process and long remediation time of biotreatments). This work first briefly introduced the Fenton technology and biotreatment, and then discussed the main considerations in the construction of a combined system. This review shows a critical overview of recent researches combining Fenton processes (as pre-treatment or post-treatment) with bioremediation for treatment of wastewater or polluted soil. We concluded that the combined treatment can be regarded as a novel and competitive technology. Furthermore, the outlook for potential applications of this combination in different polluted soil and wastewater, as well as the mechanism of combination was also discussed.

Functional behavior of bio-electrochemical treatment system with increasing azo dye concentrations: Synergistic interactions of biocatalyst and electrode assembly

Treatment of dye bearing wastewater through biological machinery is particularly challenging due to its recalcitrant and inhibitory nature. In this study, functional behavior and treatment efficiency of bio-electrochemical treatment (BET) system was evaluated with increasing azo dye concentrations (100, 200, 300 and 500mg dye/l). Maximum dye removal was observed at 300mg dye/l (75%) followed by 200mg dye/l (65%), 100mg dye/l (62%) and 500mg dye/l (58%). Concurrent increment in dye load resulted in enhanced azo reductase and dehydrogenase activities respectively (300mg dye/l: 39.6U; 4.96μg/ml). Derivatives of cyclic voltammograms also supported the involvement of various membrane bound redox shuttlers, viz., cytochrome-c, cytochrome-bc1 and flavoproteins during the electron transfer. Bacterial respiration during BET operation utilized various electron acceptors such as electrodes and dye intermediates with simultaneous bioelectricity generation. This study illustrates the synergistic interaction of biocatalyst with electrode assembly for efficient treatment of azo dye wastewater.

Heterogeneous UV-Fenton photodegradation of azocarmine B over [FeEDTA]− intercalated ZnAl-LDH at circumneutral pH

Under optimized operating conditions by RSM, the EDTA–Fe–LDH catalyst exhibited high photocatalytic activity, furthermore, the possible reaction mechanisms were proposed.