Functionalization of cubic mesoporous silica SBA-16 with carboxylic acid via one-pot synthesis route for effective removal of cationic dyes

Quantitative determination of the intracellular uptake of silica nanoparticles using asymmetric flow field flow fractionation coupled with ICP mass spectrometry and their cytotoxicity in HepG2 cells

We established a size separation method for silica nanoparticles (SiNPs) measuring 10, 30, 50, 70, and 100 nm in diameter using asymmetric flow field flow fractionation hyphenated with inductively coupled plasma mass spectrometry (AF4-ICP-MS), and evaluated the cytotoxicity of SiNPs in human hepatoma HepG2 cells. Analysis of the mixture sample revealed that nanoparticles of different sizes were eluted at approximately 2-min intervals, with no effect on each elution time or percentage recovery. Compared with larger SiNPs, smaller SiNPs exhibited high cytotoxicity when the volume of SiNPs exposed to the cells was the same. We measured SiNPs in culture medium and inside cells by AF4-ICP-MS and found that approximately 17% of SiNPs in the mixture of five differently sized particles were absorbed by the cells. Transmission electron microscopy revealed that 10 nm SiNPs formed aggregates and accumulated in the cells. Based on AF4-ICP-MS analysis, there is no clear difference in the particle volume absorbed by the cells among different sizes. Therefore, the high toxicity of small SiNPs can be explained by the fact that their large surface area relative to particle volume efficiently induces toxicological influences. Indeed, the large surface area of 10 nm SiNPs significantly contributed to the production of reactive oxygen species.

Metal Oxides Nanoparticles: General Structural Description, Chemical, Physical, and Biological Synthesis Methods, Role in Pesticides and Heavy Metal Removal through Wastewater Treatment

Nanotechnology (NT) is now firmly established in both the private home and commercial markets. Due to its unique properties, NT has been fully applied within multiple sectors like pharmacy and medicine, as well as industries like chemical, electrical, food manufacturing, and military, besides other economic sectors. With the growing demand for environmental resources from an ever-growing world population, NT application is a very advanced new area in the environmental sector and offers several advantages. A novel template synthesis approach is being used for the promising metal oxide nanostructures preparation. Synthesis of template-assisted nanomaterials promotes a greener and more promising protocol compared to traditional synthesis methods such as sol-gel and hydrothermal synthesis, and endows products with desirable properties and applications. It provides a comprehensive general view of current developments in the areas of drinking water treatment, wastewater treatment, agriculture, and remediation. In the field of wastewater treatment, we focus on the adsorption of heavy metals and persistent substances and the improved photocatalytic decomposition of the most common wastewater pollutants. The drinking water treatment section covers enhanced pathogen disinfection and heavy metal removal, point-of-use treatment, and organic removal applications, including the latest advances in pesticide removal.

Revisiting carboxylic group functionalization of silica sol-gel materials

The carboxylic chemical group is a ubiquitous moiety present in amino acids, a ligand for transition metals, a colloidal stabilizer, and a weak acidic ion-exchanger in polymeric resins and given this property, it is attractive for responsive materials or nanopore-based gating applications. As the number of uses increases, subtle requirements are imposed on this molecular group when anchored to various platforms for the functioning of an integrated chemical system. In this context, silica stands as an inert and multipurpose platform that enables the anchoring of multiple chemical entities combined through several orthogonal synthesis methods on the interface. Surface chemical modification relies on the use of organoalkoxysilanes that must meet the demand of tuned chemical properties; this, in turn, urges for innovative approaches for having an improved, but simple, organic toolbox. Starting from commonly available molecular precursors, several approaches have emerged: hydrosilylation, click thiol-ene additions, the use of carbodiimides or the reaction between cyclic anhydrides and anchored amines. In this review, we analyze the importance of the COOH groups in the area of materials science and the commercial availability of COOH-based silanes and present new approaches for obtaining COOH-based organoalkoxide precursors. Undoubtedly, this will attract widespread interest for the ultimate design of highly integrated chemical platforms.

Adsorption of persistent organic pollutants (POPs) from the aqueous environment by nano-adsorbents: A review

The intensification of urbanisation and industrial activities significantly exacerbates the distribution of toxic contaminations into the aqueous environment. Persistent organic pollutants (POPs) have received considerable attention in the past few decades because of their persistence, long-distance migration, potential bioaccumulation, latent toxicity for humans and wildlife. There is no doubt that POPs cause serious effects on the global ecosystem. Therefore, it is necessary to develop a simple, safe and sustainable approach to remove POPs from water bodies. Among other conventional techniques, the adsorption process has proven to be a more effective method for eliminating POPs and to a larger extent meet discharge regulations. Nanomaterials can effectively adsorb POPs from aqueous solutions. For most POPs, a >70% adsorptive removal efficiency was achieved. The major mechanisms for POPS uptake by nano-adsorbents includes electrostatic interaction, hydrophobic (van der Waals, π-π and electron donor-acceptor) interaction and hydrogen bonding. Nano-adsorbent can sustain a >90% POPs adsorptive removal for about 3 cycles and reuseable for up to 10 cycles. Challenges around adsorbent ecotoxicity and safe disposal were also discussed. The present review evaluated recent research outcomes on nanomaterials that are employed to remove POPs in water systems.

Design and preparation of functional azo linked polymers for the adsorptive removal of bisphenol A from water: Performance and analysis of the mechanism

In order to effectively remove refractory bisphenol A (BPA) from water, a novel nitrogen doped organic porous functional azo linked polymer (ALP-p) was designed and prepared according to the physicochemical characteristics of propane linked to two phenol hydroxyl groups. This ALP-p was synthesized with 98.5% yield, from pararosaniline and phloroglucinol, via the diazo coupling reaction to produce multiple adsorption functional groups of benzene ring, hydroxyl group and azo group. This functional material showed high adsorption capacity of 357.8 mg/g for 50 mg/L BPA, at 20 °C. The adsorption kinetics and isotherms were described by the pseudo-second-order and Langmuir model, respectively. The major adsorption mechanisms were attributed to the high specific surface area (259.8 m²/g) and pore volume (0.56 cm³/g) related surface adsorption and pore diffusion through porous stereoscopic stacking cavity anchorage. The functional group from the three-dimensional skeleton structures of ALP-p for BPA anchoring endowed chemisorption via π-π interaction between benzene rings and hydrogen-bonding (O-H⋯O, C-H⋯N, C-H⋯O and C-H⋯C) with the hydrogen atom of benzene ring, -OH from BPA and -OH, NN from ALP-p, respectively. The coexisting organic pollutants and alkali environment posed a negative effect on adsorption, while salinity had no significant effect on the process. The adsorption capacity and recovery of ALP-p were >93.5% and 81.6% after five cycles of operation.

Role of Nanoparticles in Environmental Remediation: An Insight into Heavy Metal Pollution from Dentistry

Environmental damage is without a doubt one of the most serious issues confronting society today. As dental professionals, we must recognize that some of the procedures and techniques we have been using may pose environmental risks. The usage and discharge of heavy metals from dental set-ups pollute the environment and pose a serious threat to the ecosystem. Due to the exclusive properties of nanosized particles, nanotechnology is a booming field that is being extensively studied for the remediation of pollutants. Given that the nanoparticles have a high surface area to volume ratio and significantly greater reactivity, they have been greatly considered for environmental remediation. This review aims at identifying the heavy metal sources and their environmental impact in dentistry and provides insights into the usage of nanoparticles in environmental remediation. Although the literature on various functions of inorganic nanoparticles in environmental remediation was reviewed, the research is still confined to laboratory set-ups and there is a need for more studies on the usage of nanoparticles in environmental remediation.

In-situ, Ex-situ, and nano-remediation strategies to treat polluted soil, water, and air - A review

Nanotechnology, as an emerging science, has taken over all fields of life including industries, health and medicine, environmental issues, agriculture, biotechnology etc. The use of nanostructure molecules has revolutionized all sectors. Environmental pollution is a great concern now a days, in all industrial and developing as well as some developed countries. A number of remedies are in practice to overcome this problem. The application of nanotechnology in the bioremediation of environmental pollutants is a step towards revolution. The use of various types of nanoparticles (TiO₂ based NPs, dendrimers, Fe based NPs, Silica and carbon nanomaterials, Graphene based NPs, nanotubes, polymers, micelles, nanomembranes etc.) is in practice to diminish environmental hazards. For this many In-situ (bioventing, bioslurping, biosparging, phytoremediation, permeable reactive barrier etc.) and Ex-situ (biopile, windrows, bioreactors, land farming etc.) methodologies are employed. Improved properties like nanoscale size, less time utilization, high adaptability for In-situ and Ex-situ use, undeniable degree of surface-region to-volume proportion for possible reactivity, and protection from ecological elements make nanoparticles ideal for natural applications. There are distinctive nanomaterials and nanotools accessible to treat the pollutants. Each of these methods and nanotools depends on the properties of foreign substances and the pollution site. The current designed review highlights the techniques used for bioremediation of environmental pollutants as well as use of various nanoparticles along with proposed In-situ and Ex-situ bioremediation techniques.

Enhanced uranium removal from acidic wastewater by phosphonate-functionalized ordered mesoporous silica: Surface chemistry matters the most

The removal of uranium species from aqueous phases using non-hazardous chemicals is still an open challenge, and remediation by adsorption is a prosperous strategy. Among the most crucial concerns regarding the design of an efficient material as adsorbent are, except the cost and the green character, the feasibility to be stable and effective under acidic pH, and to selectively adsorb the desired metal ion (e.g. uranium). Herein, we present a phosphonate functionalized ordered mesoporous silica (OMS-P), prepared by a one-step co-condensation synthesis. The physicochemical features of the material were determined by HR-TEM, XPS, EDX, N₂ sorption, and solid NMR, while the surface zeta potential was also measured. The removal efficiency was evaluated at two different temperatures (20 and 50 °C) in acidic environment to avoid interferences like solid phase formation or carbonate complexation and the adsorption isotherms, including data fitting with Langmuir and Freundlich models and thermodynamic parameters are presented and discussed. The high and homogeneous dispersion of the phosphonate groups within the entire silica's structure led to the greatest reported up-todays capacity (345 mg/g) at pH = 4, which was achieved in less than 10 min. Additionally, OMS-P showed that the co-presence of other polyvalent cation like Eu(III) did not affect the efficiency of adsorption, which occurs via inner-sphere complex formation. The comparison to the non-functionalized silica (OMS) revealed that the key feature towards an efficient, stable, and selective removal of the U(VI) species is the specific surface chemistry rather than the textural and structural features. Based on all the results and spectroscopic validations of surface adsorbed U(VI), the main interactions responsible for the elevated uranium removal were proposed.

Investigating Methylene Blue Removal from Aqueous Solution by Cysteine-Functionalized Mesoporous Silica

In this study, mesoporous silica nanoparticles (MSNs) were synthesised using the Stober method and functionalised with cysteine (MSN-Cys) for removal of Methylene Blue (MB) from aqueous solution using the batch method. The adsorbent nanoparticles were characterised by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), FTIR, BET, and TGA. Several influential factors on the adsorption of MB onto the surface of MSN-Cys particles were investigated, including pH, initial concentration, and contact time. The adsorption capacity of MB from aqueous solution increased from circa 70 mg/g MSN-Cys in acidic media to circa 140 mg/g MSN-Cys in basic media. Adsorption isotherms and kinetic models of adsorption were used to clarify the adsorption process. The measured adsorption isotherm was fitted with a Freundlich model for all solutions, and the kinetic model was determined to be pseudo-second-order.

Effective multi-functional biosorbent derived from corn stalk pith for dyes and oils removal

In this study, malic acid-modified corn stalk pith (MA-CSP) was prepared as an environmentally friendly multi-functional bio-sorbent for adsorbing of dyes and oils. The sorption capacity of the MA-CSP for single and binary dyes is 328.46 mg/g - 566.27 mg/g. In addition, the MA-CSP also had good sorption for lubricating oil, soybean oil, diesel oil, and isopropyl alcohol, which were 37.2 g/g, 44.1 g/g, 33.8 g/g, and 29.3 g/g, respectively. Physical and statistical models were used to analyze the adsorption behavior of methylene blue (MB) and crystal violet (CV). And its sorption behavior for dyes was also affected by the co-existing salts in water. The sorption mechanism of the dye was mainly electrostatic attraction and hydrogen bonding action. The sorption of oil was primarily via the role of van der Waals force and hydrophobic interaction. The MA-CSP, as an eco-friendly, economical and efficient multi-functional sorbent, holds promise for effective dyes and oil removal from contaminated water, and its application in other fields is also highly anticipated.

New insights into the degradation of synthetic pollutants in contaminated environments

The environment is contaminated by synthetic contaminants owing to their extensive applications globally. Hence, the removal of synthetic pollutants (SPs) from the environment has received widespread attention. Different remediation technologies have been investigated for their abilities to eliminate SPs from the ecosystem; these include photocatalysis, sonochemical techniques, nanoremediation, and bioremediation. SPs, which can be organic or inorganic, can be degraded by microbial metabolism at contaminated sites. Owing to their diverse metabolisms, microbes can adapt to a wide variety of environments. Several microbial strains have been reported for their bioremediation potential concerning synthetic chemical compounds. The selection of potential strains for large-scale removal of organic pollutants is an important research priority. Additionally, novel microbial consortia have been found to be capable of efficient degradation owing to their combined and co-metabolic activities. Microbial engineering is one of the most prominent and promising techniques for providing new opportunities to develop proficient microorganisms for various biological processes; here, we have targeted the SP-degrading mechanisms of microorganisms. This review provides an in-depth discussion of microbial engineering techniques that are used to enhance the removal of both organic and inorganic pollutants from different contaminated environments and under different conditions. The degradation of these pollutants is investigated using abiotic and biotic approaches; interestingly, biotic approaches based on microbial methods are preferable owing to their high potential for pollutant removal and cost-effectiveness.

Mesoporous silica synthesized from natural local kaolin as an effective adsorbent for removing of Acid Red 337 and its application in the treatment of real industrial textile effluent

This paper presents a synthesis of mesoporous silica (MS) from natural clay as a silica source using Pluronic L35 (EO11PO16EO11) as a structure-directing agent. The prepared material was characterized by XRD, X-ray fluorescence, thermogravimetric analysis, SEM, TEM, and N2 adsorption-desorption analyses. Then, mesoporous material was used for the removal of Acid Red 337 (AR337) from aqueous solution, and the treatment of real textile effluent. The effect of pH, contact time, weight of adsorbent, and initial concentration was studied in batch adsorption. The synthesized mesoporous material showed good discoloration efficiency with a 62% percentage. Experiment with real textile wastewater showed that 39%, 40%, and 31.5% of the color, TOC, and chemical oxygen demand respectively were eliminated by using 1 g of MS per liter of wastewater.

Anionic dye uptake via composite using chitosan-polyacrylamide hydrogel as matrix containing TiO2 nanoparticles; comprehensive adsorption studies

In the present study, TiO₂ nanoparticles dispersed in chitosan grafted polyacrylamide matrix (TiO₂-PAM-CS) was synthesized using in situ technique, and applied for the uptake of Sirius yellow K-CF dye from aqueous solution. The synthesized nano-composite was characterized by FE-SEM, TEM, XRD and FT-IR analysis. The effect of significant parameters such as pH, dose, time and temperature in batch adsorption experiments were investigated. The adsorption process was pH dependent and the optimum value of pH was obtained 2 with 96.81% dye removal at 40 °C. The equilibrium data were compatible well with the Langmuir isotherm having q_m value of 1000 mg/g. The Dubinin-Radushkevich (D-R) isotherm and thermodynamic studies prove that the adsorption is physical, endothermic and spontaneous. Kinetic study also verifies that pseudo second order kinetic model is the predominant model. The interactions between amin groups of polyacrylamide-chitosan (PAM-CS) composite in from of NH₃⁺ and molecules of anionic dye via hydrogen bond formation (Dye-NH₃⁺), also electrostatic interactions between Ti⁺⁴ available in PAM-CS composite and anionic dye (free energy of 1.66 kJ/mol calculated from D-R model) govern the adsorption mechanism. The reusability test showe that TiO₂-PAM-CS composite can be renewed easily with HCl solution as an efficient adsorbent for practical wastewater treatment.

Interfacial separation of concentrated dye mixtures from solution with environmentally compatible nitrogenous-silane nanoparticles modified with Helianthus annuus husk extract

The capacity of an adsorbent to bind and remove dye from solution greatly depends on the type of functionalization present on the nanoparticles surface, and its interaction with the dye molecules. Within this study, nitrogenous silane nanoparticles were hydrothermally synthesized resulting in the formation of rapid and highly efficient adsorbents for concentrated mixed dyes. The amorphous silane nanoparticles exhibited a monolayer based mechanism of mixed dye adsorption with removal capacities between 416.67 and 714.29 mg/g of adsorbent. Dye removal was predominantly due to the electrostatic attraction between the positively charged silane nanoparticles (13.22-8.20 mV) and the negatively charged dye molecules (-54.23 mV). Addition of H. annuus extract during synthesis resulted in three times the surface area and 10 times increased pore volume compared to the positive control. XPS analysis showed that silane treatments had various nitrogen containing functionalities at their surface responsible for binding dye. The weak colloidal stability of silane particles (13.22-8.20 mV) was disrupted following dye binding, resulting in their rapid coagulation and flocculation which facilitated the separation of bound dye molecules from solution. The suitability for environmental applications using these treatments was supported by a bacterial viability assay showing >90% cell viability in treated dye supernatants.

Ultrafine bimetallic Ag-doped Ni nanoparticles embedded in cage-type mesoporous silica SBA-16 as superior catalysts for conversion of toxic nitroaromatic compounds

Highly active Ag-doped Ni nanoparticles are successfully fabricated within carboxylic acid (-COOH) functionalized mesoporous silica SBA-16 by a facile wet incipient technique for catalytic conversion of toxic nitroaromatics. The -COOH groups on SBA-16 play a crucial role by enhancing the electrostatic interactions with Ag(I)/Ni(II) cations, that control the crystal growth during the thermal reduction. Systematic characterizations of SBA-16C and Ag_x%Ni@SBA-16C are performed by different techniques including solid state ¹³C and ²⁹Si nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), N₂ sorption, X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HRTEM) and superconducting quantum interference device (SQUID). The highly dispersed ultrafine Ag-doped Ni NPs (∼3 nm) are well-confined within SBA-16C and exhibit magnetic properties that are extremely beneficial for recycling. The bimetallic Ag_2.4%Ni@SBA-16C shows exceptionally high catalytic activity during catalytic conversion of toxic nitroaromatics to environmentally friendly amino-aromatics. The enhanced catalytic activity could be ascribed to the combined effects of unique electronic properties, synergistic effects of Ag-doped Ni, ultra-small size, metal loading, and favorable textural properties. These magnetically separable nanocatalysts show excellent durability.

The Effect of SBA-15 Surface Modification on the Process of 18β-Glycyrrhetinic Acid Adsorption: Modeling of Experimental Adsorption Isotherm Data

This study aimed at the adsorption of 18β-glycyrrhetinic acid (18β-GA), a pentacyclic triterpenoid derivative of oleanane type, onto functionalized mesoporous SBA-15 silica and non-porous silica (Aerosil^®) as the reference adsorbent. Although 18β-GA possesses various beneficial pharmacological properties including antitumor, anti-inflammatory, and antioxidant activity, it occurs is small amounts in plant materials. Thus, the efficient methods of this bioactive compound enrichment from vegetable raw materials are currently studied. Siliceous adsorbents were functionalized while using various alkoxysilane derivatives, such as (3-aminopropyl)trimethoxysilane (APTMS), [3-(methylamino)propyl]trimethoxysilane (MAPTMS), (N,N-dimethylaminopropyl)trimethoxysilane (DMAPTMS), and [3-(2-aminothylamino)propyl] trimethoxysilane (AEAPTMS). The effect of silica surface modification with agents differing in the structure and the order of amine groups on the adsorption capacity of the adsorbent and adsorption efficiency were thoroughly examined. The equilibrium adsorption data were analyzed while using the Langmuir, Freundlich, Redlich-Peterson, Temkin, Dubinin-Radushkevich, and Dubinin-Astakhov isotherms. Both linear regression and nonlinear fitting analysis were employed in order to find the best-fitted model. The adsorption isotherms of 18β-GA onto silicas functionalized with APTMS, MAPTMS, and AEAPTMS indicate the Langmuir-type adsorption, whereas sorbents modified with DMAPTMS show the constant distribution of the adsorbate between the adsorbent and the solution regardless of silica type. The Dubinin-Astakhov, Dubinin-Radushkevich, and Redlich-Peterson equations described the best the process of 18β-GA adsorption onto SBA-15 and Aerosil^® silicas that were functionalized with APTMS, MAPTMS, and AEAPTMS, regardless of the method that was used for the estimation of isotherm parameters. Based on nonlinear fitting analysis (Dubinin-Astakhov model), it can be concluded that SBA-15 sorbent that was modified with APTMS, MAPTMS, and AEAPTMS is characterized by twice the adsorption capacity (202.8–237.3 mg/g) as compared to functionalized non-porous silica (118.2–144.2 mg/g).

Confinement of Cu nanoparticles in the nanocages of large pore SBA-16 functionalized with carboxylic acid: enhanced activity and improved durability for 4-nitrophenol reduction

Fabrication of a highly active mesoporous silica SBA-16 supported Cu nanocatalyst with superb durability for the reduction of 4-nitrophenol into 4-aminophenol.

Facile one-pot synthesis of a porphyrin-based hydrophilic porous organic polymer and application as recyclable absorbent for selective separation of methylene blue

With the development of dye production and printing industry, dyes wastewater has increased dramatically. The resulting environmental pollution problem is increasing seriously. In the present work, a porphyrin-based porous organic polymer (PPOPs-OH) was synthesized by using pyrrole and 2,6-dihydroxynaphthalene-1,5-dicarbaldehyde (DHNDA) as basic building block in situ. This method was cost- and time-efficient, without the participation of metal catalysts. Further reaction of PPOPs-OH with chlorosulfonic acid, a new sulfonic acid functional material (PPOPs-SO₃H) was obtained with the increasing electronegativity and hydrophilicity. PPOPs-SO₃H exhibit good adsorption capacity for methylene blue (MB) from water (980.4 mg g^-1) and excellent selectivity for MB in the present of rhodamine B (RhB) and methyl orange (MO). Mechanism investigation revealed that electrostatic in comparison with π-π interaction is the prominent force in the absorption process. Recycling experiments found the absorption properties of PPOPs-SO₃H did not reduce significantly after several cycles. As a consequence, our findings highlight an appealing opportunities for covalent organic polymers with their potential application as high-efficiency and robust adsorbents for pollutants removal and environmental protection.

Speciation analysis of chromium by carboxylic group functionalized mesoporous silica with inductively coupled plasma mass spectrometry

Carboxyl-group functionalized mesoporous silica (CFMS) prepared by one-pot co-condensation method was employed for the solid phase extraction (SPE) of chromium species for the first time. A new approach of SPE coupled to inductively coupled plasma mass spectrometry (ICP-MS) was thus established for the speciation of chromium in environmental water samples. The influences of pH, volume of sample, extraction time, amount of adsorbent, elution conditions, co-existing ions and adsorption capacity were investigated on adsorption or elution of chromium species. Cr(VI) was not retained on the CFMS material in the pH range of 1.0-9.0, while Cr(III) was quantitatively adsorbed at pH 5.0-9.0. The captured Cr(III) was enriched by using 1.5 mol L^-1 HNO₃ as elution solvent and detected by ICP-MS. Under the optimized SPE conditions, the maximum adsorption capacity of the CFMS for Cr(III) was 57.67 mg g^-1 and the enrichment factor was 25, with the detection limit (LOD) of 0.02 μg L^-1. The proposed protocol has been successfully applied to chromium speciation in rain, lake and river water samples, which exhibited a prospect in field separation and enrichment of chromium species in environmental waters.

Nanotechnology for Environmental Remediation: Materials and Applications

Environmental remediation relies mainly on using various technologies (e.g., adsorption, absorption, chemical reactions, photocatalysis, and filtration) for the removal of contaminants from different environmental media (e.g., soil, water, and air). The enhanced properties and effectiveness of nanotechnology-based materials makes them particularly suitable for such processes given that they have a high surface area-to-volume ratio, which often results in higher reactivity. This review provides an overview of three main categories of nanomaterials (inorganic, carbon-based, and polymeric-based materials) used for environmental remediation. The use of these nanomaterials for the remediation of different environmental contaminants-such as heavy metals, dyes, chlorinated organic compounds, organophosphorus compounds, volatile organic compounds, and halogenated herbicides-is reviewed. Various recent examples are extensively highlighted focusing on the materials and their applications.

Synthesis and Characterization of Modified BiOCl and Their Application in Adsorption of Low-Concentration Dyes from Aqueous Solution

The synthesis and characterization of BiOCl and Fe³⁺-grafted BiOCl (Fe/BiOCl) is reported that are developed as efficient adsorbents for the removal of cationic dyes rhodamine B (RhB) and methylene blue (MB) as well as anionic dyes methyl orange (MO) and acid orange (AO) from aqueous solutions with low concentration of 0.01~0.04 mmol/L. Characterizations by various techniques indicate that Fe³⁺ grafting induced more open porous structure and higher specific surface area. Both BiOCl and Fe/BiOCl with negatively charged surfaces showed excellent adsorption efficiency toward cationic dyes, which could sharply reach 99.6 and nearly 100% within 3 min on BiOCl and 97.0 and 98.0% within 10 min on Fe/BiOCl for removing RhB and MB, respectively. However, Fe/BiOCl showed higher adsorption capacity than BiOCl toward ionic dyes. The influence of initial dye concentration, temperature, and pH value on the adsorption capacity is comprehensively studied. The adsorption process of RhB conforms to Langmuir adsorption isotherm and pseudo-second-order kinetic feature. The excellent adsorption capacities of as-prepared adsorbents toward cationic dyes are rationalized on the basis of electrostatic attraction as well as open porous structure and high specific surface area. In comparison with Fe/BiOCl, BiOCl displays higher selective efficiency toward cationic dyes in mixed dye solutions.

Efficient Removal of Polycyclic Aromatic Hydrocarbons, Dyes, and Heavy Metal Ions by a Homopolymer Vesicle

It is an important challenge to effectively remove environmental pollutants such as polycyclic aromatic hydrocarbons (PAHs), dyes, and heavy metal ions at a low cost. Herein, we present a multifunctional homopolymer vesicle self-assembled from a scalable homopolymer, poly(amic acid) (PAA), at room temperature. The vesicle can efficiently eliminate PAHs, cationic dyes, and heavy metal ions from water based on π-π stacking, hydrophobic effect, and electrostatic interactions with the pollutants. The residual concentrations of PAHs, cationic dyes, and heavy metal ions (such as Ni²⁺) in water are lower than 0.60 and 0.30 parts per billion (ppb) and 0.095 parts per million (ppm), respectively, representing a promising adsorbent for water remediation. Furthermore, precious metal ions such as Ag⁺ can be recovered into silver nanoparticles by in situ reduction on the membrane of PAA vesicles to form a silver nanoparticle/vesicle composite (Ag@vesicle) that can effectively catalyze the reduction of toxic pollutants such as aromatic nitro-compounds and be recycled for more than ten times.

Utilization of modified Dioscorea opposita Thunb. as a novel biosorbent for the adsorption of indigo carmine in aqueous solutions

It is important to identify efficient adsorbents for the removal of dyestuffs from aqueous solutions as this kind of pollution becomes more extensive. In this study, Dioscorea opposita Thunb. (DOT) was modified with polyethylene imine (DOT@PEI) as a novel biosorbent to remove the typical anionic dye indigo carmine (IC) from wastewater. The modified DOT@PEI biosorbent was characterized using BET (Brunauer–Emmett–Teller), SEM (scanning electron microscopy), EDS (energy dispersive spectroscopy), and FTIR (Fourier transform infrared spectroscopy) methods, and the results demonstrated that DOT@PEI is an excellent biosorbent. Batch adsorption studies showed that optimum adsorption parameters were pH 2.0, 1.0 g L⁻¹ dosage, and temperature of 20 °C. The isothermal adsorption data showed good fitting to the Langmuir model, with a maximum adsorption capability of 344.83 mg g⁻¹ for IC. Kinetic experiments showed that the experimental data fitted well to a pseudo-second-order kinetic model and the thermodynamic parameters indicated that adsorption is a spontaneous exothermic process. Adsorption–desorption experiments illustrated the good regeneration capability of DOT@PEI. These results demonstrate that DOT@PEI can be used as an effective biosorbent in water for the removal of anionic dyes such as required for environmental applications.

It is important to identify efficient adsorbents for the removal of dyestuffs from aqueous solutions as this kind of pollution becomes more extensive.

Highly Efficient, Rapid, and Simultaneous Removal of Cationic Dyes from Aqueous Solution Using Monodispersed Mesoporous Silica Nanoparticles as the Adsorbent

In this work, a highly efficient and rapid method for simultaneously removing cationic dyes from aqueous solutions was developed by using monodispersed mesoporous silica nanoparticles (MSNs) as the adsorbents. The MSNs were prepared by a facile one-pot method and characterized by scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, and Brunauer-Emmett-Teller. Experimental results demonstrated that the as-prepared MSNs possessed a large specific surface area (about 585 m²/g), uniform particle size (about 30 nm), large pore volume (1.175 cm³/g), and narrow pore size distribution (1.68 nm). The materials showed highly efficient and rapid adsorption properties for cationic dyes including rhodamine B, methylene blue, methyl violet, malachite green, and basic fuchsin. Under the optimized conditions, the maximum adsorption capacities for the above mentioned cationic dyes were in the range of 14.70 mg/g to 34.23 mg/g, which could be achieved within 2 to 6 min. The probable adsorption mechanism of MSNs for adsorption of cationic dyes is proposed. It could be considered that the adsorption is mainly controlled by electrostatic interactions and hydrogen bonding between the cationic dyes and MSNs. As a low-cost, biocompatible, and environmentally friendly material, MSNs have a potential application in wastewater treatment for removing some environmental cationic contaminants.

Facile preparation of magnetic mesoporous MnFe2O4@SiO2-CTAB composites for Cr(VI) adsorption and reduction

Chromium-contaminated water is regarded as one of the biggest threats to human health. In this study, a novel magnetic mesoporous MnFe₂O₄@SiO₂-CTAB composite was prepared by a facile one-step modification method and applied to remove Cr(VI). X-ray diffraction, scanning electron microscopy, transmission electron microscopy, specific surface area, and vibrating sample magnetometer were used to characterize MnFe₂O₄@SiO₂-CTAB composites. The morphology analysis showed that the composites displayed a core-shell structure. The outer shell was mesoporous silica with CTAB and the core was MnFe₂O₄ nanoparticles, which ensured the easy separation by an external magnetic field. The performance of MnFe₂O₄@SiO₂-CTAB composites in Cr(VI) removal was far better than that of bare MnFe₂O₄ nanoparticles. There were two reasons for the effective removal of Cr(VI) by MnFe₂O₄@SiO₂-CTAB composites: (1) mesoporous silica shell with abundant CTA⁺ significantly enhanced the Cr(VI) adsorption capacity of the composites; (2) a portion of Cr(VI) was reduced to less toxic Cr(III) by MnFe₂O₄, followed by Cr(III) immobilized on MnFe₂O₄@SiO₂-CTAB composites, which had been demonstrated by X-ray photoelectron spectroscopy results. The adsorption of Cr(VI) onto MnFe₂O₄@SiO₂-CTAB followed the Freundlich isotherm model and pseudo-second-order model. Tests on the regeneration and reuse of the composites were performed. The removal efficiency of Cr(VI) still retained 92.4% in the sixth cycle. MnFe₂O₄@SiO₂-CTAB composites exhibited a great potential for the removal of Cr(VI) from water.

Activation of persulfate by MMIOC for highly efficient degradation of rhodamine B

Mesoporous magnetic iron oxide composites (MMIOCs) were successfully prepared by one-step evaporation induced self-assembly using an organic ferrocene surfactant, and innovatively studied as a potential alternative to Co₃O₄ for persulfate activation to generate radicals.

Adsorption behavior of modified Iron stick yam skin with Polyethyleneimine as a potential biosorbent for the removal of anionic dyes in single and ternary systems at low temperature

The skin of Iron stick yam (ISY) was modified with Polyethyleneimine (ISY@PEI) and evaluated for use as a potential biosorbent to remove the anionic dyes Sunset yellow (SY), Lemon yellow (LY), and Carmine (CM) from wastewater under low temperature conditions (5-15°C) in single and ternary dye systems. Both in the single and ternary systems, experimental data showed that adsorption capacity reached the highest value at 5°C, and adsorption capacity decreased when the temperature increased (10-50°C). The equilibrium data fitted very well to the Langmuir model and the extended Langmuir isotherm, for the single and ternary systems, respectively. The maximum adsorption capability was 138.92, 476.31, and 500.13mg/g for LY, SY, and CM, respectively, in a single system and 36.63, 303.31, and 294.12mg/g for LY, SY, and CM, respectively, in a ternary system. The adsorption followed pseudo-second-order kinetics. The thermodynamic parameters indicated that it was a spontaneous and exothermic process.

Ni Nanoparticles Supported on Cage-Type Mesoporous Silica for CO2 Hydrogenation with High CH4 Selectivity

Ni nanoparticles (around 4 nm diameter) were successfully supported on cage-type mesoporous silica SBA-16 (denoted as Ni@SBA-16) via wet impregnation at pH 9, followed by the calcination-reduction process. The Ni@SBA-16 catalyst with a very high Ni loading amount (22.9 wt %) exhibited exceptionally high CH4 selectivity for CO2 hydrogenation. At a nearly identical loading amount, the Ni@SBA-16 catalysts with smaller particle size of Ni NPs surprisingly exhibited a higher catalytic activity of CO2 hydrogenation and also led to a higher selectivity on CH4 formation than the Ni@SiO2 catalysts. This enhanced activity of the Ni@SBA-16 catalyst is suggested to be an accumulative result of the advantageous structural properties of the support SBA-16 and the well confined Ni NPs within the support; both induced a favorable reaction pathway for high selectivity of CH4 in CO2 hydrogenation.

One-step synthesis of SnO2-reduced graphene oxide (SOG) composites for efficient removal of organic dyes from wastewater

In this work, SnO₂ functionalized graphene oxide was shown to possess high adsorption capacities and fast adsorption rates for organic dyes over wide pH ranges. Additionally, the adsorbent could be easily regenerated by washing with ethanol.