Self-flocculated powdered activated carbon with different oxidation methods and their influence on adsorption behavior

Comparison of four pre-oxidants coupled powdered activated carbon adsorption for odor compounds and algae removal: Kinetics, process optimization, and formation of disinfection byproducts

Pre-oxidation and powdered activate carbon (PAC) are usually used to remove algae and odorants in drinking waterworks. However, the influence of interaction between oxidants and PAC on the treatment performance are scarcely known. This study systematically investigated the combination schemes of four oxidants (KMnO4, NaClO, ClO2, and O3) and PAC on the inactivation of Microcystis aeruginosa cells and removal of four frequently detected odorants in raw water (diethyl disulfide (DEDS), 2,2'-oxybis(1chloropropane) (DCIP), 2-methylisoborneol (2-MIB) and geosmin (GSM)). O3 showed highest pseudo-first-order removal rate for all four compounds and NaClO exhibited highest inactivation rates for the cell viability and Chlorophyll a (Chl-a). The Freundlich model fitted well for the adsorption of DEDS and DCIP by PAC. When treated by combined oxidation/PAC, the removal ratio of algae cells and odorants were lower (at least 1.6 times) than the sum of removal ratios obtained in oxidation or PAC adsorption alone. Among these four oxidants, the highest synchronous control efficiency of odorants (52 %) and algae (66 %) was achieved by NaClO/PAC. Prolonging the dosage time interval promoted the removal rates. The pre-PAC/post-oxidation processes possessed comparable efficiency for the removal of odorants and algae cells comparing with pre-oxidation/post-PAC process, but significantly inhibited formation of disinfection byproducts (DBPs), especially for the formation of C-DBPs (for NaClO and ClO2), bromate (for O3) and chlorate/chlorite (for ClO2). This study could provide a better understanding of improving in-situ operation of the combined pre-treatments of oxidation and PAC for source water.

Efficient removal of bisphenol pollutants on imine-based covalent organic frameworks: adsorption behavior and mechanism

The extensive use of bisphenol analogues in industry has aggravated the contamination of the water environment, and how to effectively remove them has become a research hotspot. This study presents two imine-based covalent organic frameworks with different pore sizes (COFs) [TAPB (1,3,5-tris(4-aminophenyl)benzene)-Dva (2,5-divinylterephthaldehyde)-PDA (terephthalaldehyde) (COF-1), and TAPB (1,3,5-tris(4-aminophenyl)benzene)-Dva (2,5-divinylterephthaldehyde)-BPDA (biphenyl dialdehyde) (COF-2)], which have achieved the efficient adsorption of bisphenol S (BPS) and bisphenol A (BPA). The maximum adsorption capacity of COF-2 for BPS and BPA obtained from Langmuir isotherms were calculated as 200.00 mg g⁻¹ and 149.25 mg g⁻¹. Both hydrogen bonding and π–π interactions might have been responsible for the adsorption of BPS and BPA on the COFs, where the high adsorption capacity of COFs was due to their unique pore dimensions and structures. Different types of pharmaceutical adsorption studies indicated that COF-2 exhibited a higher adsorption performance for different types of pharmaceuticals than COF-1, and the adsorption capacity was ranked as follows: bisphenol pharmaceuticals > anti-inflammatory pharmaceuticals > sulfa pharmaceuticals. These results confirmed that COFs with larger pore sizes were more conducive to the adsorption of pollutants with smaller molecular dimensions. Moreover, COF-1 and COF-2 possessed excellent pH stability and recyclability, which suggested strong potential applications for these novel adsorbents in the remediation of organic pollutants in natural waterways and aqueous ecosystems.

Two imine-based covalent organic frameworks with different pore sizes were synthesized, and can be used as adsorbents for the removal of bisphenol pollutants, showing high affinity toward bisphenol S and bisphenol A.

Unveiling the correlation of Fe3O4 fractions upon the adsorption behavior of sulfamethoxazole on magnetic activated carbon

Magnetic particles (MPs) assisted powdered activated carbon (PAC) is a promising composite material for adsorption removal of micropollutants. The fractional amount of Fe₃O₄ impacts the balance between adsorption capacity and magnetic property of magnetic activated carbons (MPACs), and therefore it affects the extent of sulfamethoxazole (SMX) removal. Here, five MPACs with different mass ratios of Fe₃O₄: PAC (1:1, 1:2, 1:4, 1:6, and 1:8) were prepared using a hydrothermal method and characterized by various spectroscopic methods. The spherical shaped MPs were monolayerly deposited on PAC with fewer pores blocked when the mass ratio of Fe₃O₄ was comparatively low (≤ 20%). MPAC6 (14.3 wt% of Fe₃O₄) had the best overall performance, with good Langmuir adsorption capacities for SMX (173.0 mg g^-1) and excellent magnetic properties (9.0 emu g^-1). Corresponding adsorption kinetics fitted well with the pseudo second-order kinetic model. The negative ΔG⁰ (-25.6 to -27.2 KJ mol^-1) and ΔH⁰ (-9.14 KJ mol^-1), and positive ΔS⁰ (0.55 KJ mol^-1 K^-1) properties indicated the spontaneous and exothermic nature of the adsorption process accompanied by an increase in entropy. The strong cation-assisted electron donor-acceptor and hydrophobic interactions were contributed to a high extent of SMX removal in the pH range of 2-4. Formation of negative charge-assisted H-bonds was responsible for the adsorption of hydrophilic SMX^- on negatively charged MPAC6 in alkaline solution. Desorption and regeneration experiments showed SMX removal was still 92.3% in the 5th cycle. These findings give valuable insights into the interactions between SMX and MPACs and guide for choosing sustainable magnetic adsorbents for environmental applications.

Rapid elimination of trace bisphenol pollutants with porous β-cyclodextrin modified cellulose nanofibrous membrane in water: adsorption behavior and mechanism

A porous β-cyclodextrin modified cellulose nano-fiber membrane (CA-P-CDP) was fabricated and employed to treat the trace bisphenol pollutants (bisphenol A (BPA), bisphenol S (BPS), and bisphenol F (BPF)) in water. The characterization highlighted the porous structure, stable crystal structure, good thermal stability of the obtained CA-P-CDP, as well as abundant functional groups, which could greatly improve the adsorption of bisphenol pollutants and recovery. During the static adsorption process, the adsorbents dosage, temperature and pH showed significant influence on the adsorption performance. At the selected conditions (25 °C, 7.0 of pH and 0.1 g L^-1 of CA-P-CDP dosage), the BPA/BPS/BPF adsorption on CA-P-CDP could rapidly reached the equilibrium in 15 min by following the pseudo-second-order kinetic model, and the maximum adsorption capacities were 50.37, 48.52 and 47.25 mg g^-1, respectively, according to Liu isotherm model. The mechanisms between the bisphenol pollutants and CA-P-CDP mainly involved the synergism of hydrophobic effects, hydrogen-bonding interactions and π-π stacking interactions. Besides, the dynamic adsorption data showed that the volume of treated water for CA-P-CDP (0.58 L) was 14.5 times larger than that of pristine cellulose membrane (0.04 L), revealing satisfactory adsorption performance of trace BPA in water. Furthermore, during the treatment of real water samples (lake water and river water) with trace bisphenol pollutants, the complete removal of the pollutants were evidently observed, which strongly verified the possibility of CA-P-CDP for the practical application.

Surface modification of activated carbon by corona treatment

Surface modification may lead activated carbon (AC) to take on different properties. This study aimed to promote surface modification of activated carbons using corona treatment (electrical discharge). In this study, powdered commercial activated carbon was used. Activated carbons were subjected to corona treatment at different exposure times (2, 5, 8 and 10 min) at 4.5 cm height from the source. To observe differences promoted by treatment, activated carbons were analyzed by acidity, surface functional groups, Fourier Transform Infrared Spectroscopy (FTIR), elemental analysis (CHN), proximate analysis and thermogravimetry. Corona treatment impacted surface chemistry of activated carbons. There was a trend of increasing surface acidity according to exposure time. There were changes in functional groups, increasing carboxyl acid and decreasing lactone and phenol groups. FTIR analysis showed peaks in the bands at 3500, 1650 and 1300 cm-1. Increase of oxygen content and decrease of carbon content were also found. Immediate analysis followed similar tendency for volatile and fixed carbon content. There were also differences in thermogravimetry analysis. Treated activated carbons were different compared to virgin activated carbon. This difference was performed by surface oxidation. Thus, this study showed that corona treatment caused surface modifications and might impact adsorption process.

Biosorbents based on agricultural wastes for ionic liquid removal: An approach to agricultural wastes management

Modified biochars produced from different agricultural wastes were used as low-cost biosorbents to remove hydrophilic ionic liquid, 1-butyl-3-methyl-imidazolium chloride ([BMIM][Cl]). Herein, the biosorbents based on peanut shell, corn stalk and wheat straw (denoted as PB-K-N, CB-K-N and WB-K-N) all exhibited higher [BMIM][Cl] removal than many other carbonaceous adsorbents and the adsorption capacities were as the following: PB-K-N > CB-K-N > WB-K-N. The characterizations of biosorbents indicated that they had great deal of similarity in morphological, textural and surface chemical properties such as possessing simultaneously accessible microporous structure and abundant oxygen-containing functional groups. Additionally, adsorption of [BMIM][Cl] onto PB-K-N, CB-K-N and WB-K-N prepared from the modified process, which was better described by pseudo-second order kinetic and Freundlich isotherm models. Therefore, the viable approach could also be applied in other biomass materials treatment for the efficient removal of ILs from aqueous solutions, as well as recycling agricultural wastes to ease their disposal pressure.