Decision-making framework for the application of in-situ activated carbon amendment to sediment

Granular activated carbon-supported titanium dioxide nanoparticles as an amendment for amending copper-contaminated sediments: Effect on the pH in sediments and enzymatic activities

The problem of heavy metal pollution in sediments attracts increasing attention with the process of industrialization. In this study, a novel sediments amendment granular activated carbon (GAC)-supported titanium dioxide nanoparticles (GATN) was synthesized to amend copper (Cu)-contaminated sediments. The effect of the amendments on the potential mobility and bioavailability of Cu was evaluated by the concentration of Cu in the overlying water and the chemical speciations of Cu in sediments. After 35 days of incubation, GATN and GAC were separated from the GATN-amended sediments and the GAC-amended sediments. The European Community Bureau of Reference (BCR) sequence extraction procedure was performed on the separated sediments. Compared with the control group, the addition of 20% GATN amended sediments for 35 days, the Cu concentration in the overlying water decreased by 90.75%. Compared with original sediments, the exchangeable fraction and reducible fraction of Cu decreased from 42.30% to 17.36%-3.63% and 6.57%, respectively, and the oxidizable fraction and residual fraction of Cu increased from 13.57% to 26.77%-33.21% and 56.58%, respectively. The potential mobility and bioavailability of Cu were significantly reduced. According to the BCR sequence extraction results of the remaining sediments after the separation of the GATN, the Cu adsorbed on the GATN surface is mainly an oxidizable fraction, which is generated by the complexation reaction of hydroxyl (-OH) and Cu²⁺. Meanwhile, the present of GATN also can enhance the remediation capacity of sediments, which plays an important role during the amendment process. The pH was measured after GATN-amended sediments adding. Results showed that GATN improved their remediation capacity of sediments by optimizing the pH in sediments. The enzyme activity-experiment indicated that GATN effectively reduces the biological toxicity of Cu in Cu-contaminated sediments. Results verified that GATN, as a sediments amendment, has good application potential.

Impact of application mode on the control of phosphorus release from sediments using zirconium-modified bentonite as geo-engineering material

In this study, the influence of zirconium-modified bentonite (ZMBT) addition, capping, and addition/capping on the transport and transformation of phosphorus (P) in sediments were comparatively investigated using incubation experiments to determine the effect of ZMBT application mode on the controlling efficiency. Results showed that the release of soluble reactive P (SRP) from sediment to the overlying water was effectively intercepted by all the ZMBT treatments. The inactivation of pore-water SRP, diffusive gradients in thin films-labile P (DGT-LP) and mobile P (Mob-IP) in sediment played a pivotal role in the regulation of SRP liberation from the sediment to the overlying water by ZMBT. An application mode change from capping and addition/capping to addition resulted in a decline of the reduction efficiency of overlying water SRP by the ZMBT treatment to some extent. The variation in the reduction efficiency of pore-water SRP and DGT-LP in the uppermost sediment were responsible for the change of the reduction efficiency of overlying water SRP by the ZMBT treatment. A change in application mode from capping to addition/capping and addition caused an obvious increase in the immobilization efficiency of pore-water SRP, DGT-LP and Mob-IP in the lower sediment by the ZMBT treatment. Results of this work indicate that, when the ZMBT capping layer on the top of sediment was completely mixed with the sediment, although the stability of P in the lower sediment obviously increases, the controlling efficiency of SRP liberating from the sediment to the overlying water decreases to some extent. Thus, the repeated addition of ZMBT to form a covering layer on the ZMBT-amended sediment is very necessary for the effective control of sediment-P release to the overlying water.

Using raw and sulfur-impregnated activated carbon as active cap for leaching inhibition of mercury and methylmercury from contaminated sediment

Sulfur-impregnated activated carbon (SAC) has been reported with a high affinity to Hg, but little research has done on understanding its potential as active cap for inhibition of Hg release from contaminated sediments. In this study, high-quality coconut-shell activated carbon (AC) and its derived SAC were examined and shown to have great affinity to both aqueous Hg²⁺ and methylmercury (MeHg). SAC had greater partitioning coefficients for Hg²⁺ (K_D = 9.42 × 10⁴) and MeHg (K_D = 7.661 × 10⁵) as compared to those for AC (K_D = 3.69 × 10⁴ and 2.25 × 10⁵, respectively). However, AC appeared to have greater inhibition in total Hg (THg) leaching from sediment (14.2-235.8 mg-Hg/kg-sediment) to porewater phase as compared to SAC. 3 wt% AC amendment in sediment (235.8 mg/kg Hg) was the optimum dosage causing the porewater THg reduction by 99.88%. Moreover, significant inhibition in both THg and MeHg releases within the 83-d trial microcosm tests was demonstrated with active caps composed of SAC + bentonite, SAC + clean sediment, and AC + bentonite. While both AC and SAC successfully reduce the porewater Hg in sediment environment, the smaller inhibition in Hg release by SAC as compared to that by raw AC may suggest that possibly formed HgS nanoparticles could be released into the porewater that elevates the porewater Hg concentration.

In situ remediation of contaminated marinesediment: an overview

Sediment tends to accumulate inorganic and persistent hydrophobic organic contaminants representing one of the main sinks and sources of pollution. Generally, contaminated sediment poses medium- and long-term risks to humans and ecosystem health; dredging activities or natural resuspension phenomena (i.e., strongly adverse weather conditions) can remobilize pollution releasing it into the water column. Thus, ex situ traditional remediation activities (i.e., dredging) can be hazardous compared to in situ techniques that try to keep to a minimum sediment mobilization, unless dredging is compulsory to reach a desired bathymetric level. We reviewed in situ physico-chemical (i.e., active mixing and thin capping, solidification/stabilization, chemical oxidation, dechlorination, electrokinetic separation, and sediment flushing) and bio-assisted treatments, including hybrid solutions (i.e., nanocomposite reactive capping, bioreactive capping, microbial electrochemical technologies). We found that significant gaps still remain into the knowledge about the application of in situ contaminated sediment remediation techniques from the technical and the practical viewpoint. Only activated carbon-based technologies are well developed and currently applied with several available case studies. The environmental implication of in situ remediation technologies was only shortly investigated on a long-term basis after its application, so it is not clear how they can really perform.