Coumarin-modified microporous-mesoporous Zn-MOF-74 showing ultra-high uptake capacity and photo-switched storage/release of U(VI) ions

Decorating Channel Walls in Metal-Organic Frameworks with Crown Ethers for Efficient and Selective Separation of Radioactive Strontium(II)

Nuclear accidents and the improper disposal of nuclear wastes have led to serious environmental radioactive pollutions. The rational design of adsorbents for the highly efficient separation of strontium(II) is essential in treating nuclear waste and recovering radioactive strontium resources. Metal-organic frameworks (MOFs) are potential materials for the separation of aqueous metal ions owing to their designable structure and tunable functionality. Herein, a novel 3D MOF material MOF-18Cr6, in which 1D channels are formed using 18-crown-6-ether-containing ligands as channel walls, is fabricated for strontium(II) separation. In contrast to traditional MOFs designed by grafting functional groups in the framework pores, MOF-18Cr6 possesses regular 18-crown-6-ether cavities on the channel walls, which not only can transport and intake strontium(II) via the channels, but also prevent blockage of the channels after the binding of strontium(II). Consequently, the functional sites are fully utilized to achieve a high strontium(II) removal rate of 99.73 % in simulated nuclear wastewater. This study fabricates a highly promising adsorbent for the separation of aqueous radioactive strontium(II), and more importantly, can provide a new strategy for the rational design of high-performance MOF adsorbents for separating target substances from complex aqueous environments.

Significance of MOF adsorbents in uranium remediation from water

Uranium is considered as one of the most perilous radioactive contaminants in the aqueous environment. It has shown detrimental effects on both flora and fauna and because of its toxicities on human beings, therefore its exclusion from the aqueous environment is very essential. The utilization of metal-organic frameworks (MOFs) as an adsorbent for the removal of uranium from the aqueous environment could be a good approach. MOFs possess unique properties like high surface area, high porosity, adjustable pore size, etc. This makes them promising adsorbents for the removal of uranium from contaminated water. In this paper, sources of uranium in the water environment, human health disorders, and application of the different types of MOFs as well as the mechanisms of uranium removal have been discussed meticulously.

Stimuli-Responsive Ion Adsorbents for Sustainable Separation Applications

Stimuli-responsive ion absorbents (SRIAs) with reversible ion adsorption and desorption properties have recently attracted immense attention due to their outstanding functionalities for sustainable separation applications. Over the past decade, a series of SRIAs that respond to single or multiple external stimuli (e.g., pH, gas, temperature, light, magnetic, and voltage) have been reported to achieve excellent ion adsorption capacity and selectivity while simultaneously allowing for their reusability. In contrast to traditional adsorbents that are mainly regenerated through chemical additives, SRIAs allow for reduced chemical and even chemical-free regeneration capacities, thereby enabling environmentally friendly and energy-efficient separation technologies. In this review, we systematically summarize the materials and strategies reported to date for synthesizing single-, dual-, and multiresponsive ion adsorbents. Following a discourse on the fundamental mechanisms that govern their adsorption and desorption under various external stimuli, we provide a concise discussion of the regeneration capacity and application of these responsive ion adsorbents for sustainable water desalination, toxic ion removal, and valuable ion extract and recovery. Finally, we discuss the challenges in developing and deploying these promising multifunctional responsive ion adsorbents together with strategies to overcome these limitations and provide prospects for their future.

Recent progress in high-performance environmental impacts of the removal of radionuclides from wastewater based on metal-organic frameworks: a review

The nuclear industry is rapidly developing and the effective management of nuclear waste and monitoring the nuclear fuel cycle are crucial. The presence of various radionuclides such as uranium (U), europium (Eu), technetium (Tc), iodine (I), thorium (Th), cesium (Cs), and strontium (Sr) in the environment is a major concern, and the development of materials with high adsorption capacity and selectivity is essential for their effective removal. Metal-organic frameworks (MOFs) have recently emerged as promising materials for removing radioactive elements from water resources due to their unique properties such as tunable pore size, high surface area, and chemical structure. This review provides an extensive analysis of the potential of MOFs as adsorbents for purifying various radionuclides rather than using different techniques such as precipitation, filtration, ion exchange, electrolysis, solvent extraction, and flotation. This review discusses various MOF fabrication methods, focusing on minimizing environmental impacts when using organic solvents and solvent-free methods, and covers the mechanism of MOF adsorption towards radionuclides, including macroscopic and microscopic views. It also examines the effectiveness of MOFs in removing radionuclides from wastewater, their behavior on exposure to high radiation, and their renewability and reusability. We conclude by emphasizing the need for further research to optimize the performance of MOFs and expand their use in real-world applications. Overall, this review provides valuable insights into the potential of MOFs as efficient and durable materials for removing radioactive elements from water resources, addressing a critical issue in the nuclear industry.

Photoinduced movement: how photoirradiation induced the movements of matter

Pioneered by the success on active transport of ions across membranes in 1980 using the regulation of the binding properties of crown ethers with covalently linked photoisomerizable units, extensive studies on the movements by using varied interactions between moving objects and environments have been reported. Photoinduced movements of various objects ranging from molecules, polymers to microscopic particles were discussed from the aspects of the driving for the movements, materials design to achieve the movements and systems design to see and to utilize the movements are summarized in this review.

Metal-Organic Frameworks and Their Composites for Environmental Applications

From the point of view of the ecological environment, contaminants such as heavy metal ions or toxic gases have caused harmful impacts on the environment and human health, and overcoming these adverse effects remains a serious and important task. Very recent, highly crystalline porous metal-organic frameworks (MOFs), with tailorable chemistry and excellent chemical stability, have shown promising properties in the field of removing various hazardous pollutants. This review concentrates on the recent progress of MOFs and MOF-based materials and their exploit in environmental applications, mainly including water treatment and gas storage and separation. Finally, challenges and trends of MOFs and MOF-based materials for future developments are discussed and explored.

Metal-Organic Framework-Based Materials for Adsorption and Detection of Uranium(VI) from Aqueous Solution

The steady supply of uranium resources and the reduction or elimination of the ecological and human health hazards of wastewater containing uranium make the recovery and detection of uranium in water greatly important. Thus, the development of effective adsorbents and sensors has received growing attention. Metal-organic frameworks (MOFs) possessing fascinating characteristics such as high surface area, high porosity, adjustable pore size, and luminescence have been widely used for either uranium adsorption or sensing. Now pertinent research has transited slowly into simultaneous uranium adsorption and detection. In this review, the progress on the research of MOF-based materials used for both adsorption and detection of uranium in water is first summarized. The adsorption mechanisms between uranium species in aqueous solution and MOF-based materials are elaborated by macroscopic batch experiments combined with microscopic spectral technology. Moreover, the application of MOF-based materials as uranium sensors is focused on their typical structures, sensing mechanisms, and the representative examples. Furthermore, the bifunctional MOF-based materials used for simultaneous detection and adsorption of U(VI) from aqueous solution are introduced. Finally, we also discuss the challenges and perspectives of MOF-based materials for uranium adsorption and detection to provide a useful inspiration and significant reference for further developing better adsorbents and sensors for uranium containment and detection.

Application of hybrid MOF composite in extraction of f-block elements: Experimental and computational investigation

An attempt was made to understand the sorption behaviour of UO₂²⁺, Th⁴⁺ and Eu³⁺ on novel hybrid metal-organic framework composites, FeBDC@CoBDC. The XRD pattern revealed the composite nature of the hybrid MOF materials, while FTIR and Raman spectroscopic analyses evidenced the presence of different functional moieties. The thermal stability of the hybrid MOF composites was investigated through thermogravimetric analysis. The sorption predominantly followed Langmuir isotherm with sorption capacity of 189 mg g^-1, 224 mg g^-1 and 205 mg g^-1 for UO₂²⁺, Th⁴⁺ and Eu³⁺ respectively. The sorption proceeded through chemisorption following pseudo 2^nd order rate kinetics. The processes were found to be thermodynamically favourable and endothermic in nature. However, they were entropically driven. Multiple contacts of complexing agents were necessary for quantitative elution of f-elements from loaded MOF. The MOF showed moderate stability towards radiation exposure. DFT calculation was used for the optimization of structures, estimation of bond length and estimation of binding energy. In hybrid MOF composites, the Fe atom was having six coordination with 4 O atoms of BDC moieties and 2 O atoms of -OH groups. The O atoms of BDC and -OH groups were coordinated to Eu, Th and U atoms during their sorption.

Applications of water-stable metal-organic frameworks in the removal of water pollutants: A review

Because the pollutants produced by human activities have destroyed the ecological balance of natural water environment, and caused severe impact on human life safety and environmental security. Hence the task of water environment restoration is imminent. Metal-organic frameworks (MOFs), structured from organic ligands and inorganic metal ions, are notable for their outstanding crystallinity, diverse structures, large surface areas, adsorption performance, and excellent component tunability. The water stability of MOFs is a key requisite for their possible actual applications in separation, catalysis, adsorption, and other water environment remediation areas because it is necessary to safeguard the integrity of the material structure during utilization. In this article, we comprehensively review state-of-the-art research progress on the promising potential of MOFs as excellent nanomaterials to remove contaminants from the water environment. Firstly, the fundamental characteristics and preparation methods of several typical water-stable MOFs include UiO, MIL, and ZIF are introduced. Then, the removal property and mechanism of heavy metal ions, radionuclide contaminants, drugs, and organic dyes by different MOFs were compared. Finally, the application prospect of MOFs in pollutant remediation prospected. In this review, the synthesis methods and application in water pollutant removal are explored, which provide ways toward the effective use of water-stable MOFs in materials design and environmental remediation.

High-performance removal of radionuclides by porous organic frameworks from the aquatic environment: A review

Dealing with unwanted nuclear waste is still a serious issue from the point of view of humans and the environment because of its harmful and dangerous effects. Recently, porous organic frameworks (POFs) have gained an increasing concern as effective materials in the removal of various types of hazardous metal ions, especially radioactive metal ions. POFs are a unique class that included covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) with strong covalent bonds, large surface area, high adsorption capacity, tunable porosity, and a porous structure with more efficient than conventional adsorbents. This review highlights the recent developments of POFs for the rapid elimination of radionuclide. The unique characteristics, adsorption properties, and interaction mechanisms between radioactive metal ions and the POF-based materials are summarized. Also, prospects for enhancing the performance of POFs to capture radioactive metal ions are discussed.

Metal-organic frameworks as superior porous adsorbents for radionuclide sequestration: Current status and perspectives

Efficient separation of hazardous radionuclides from radioactive waste remains a challenge to the global acceptance of nuclear power due to complex nature of the waste, high radiotoxicities and presence of large number of interfering elements. Sorption of radioactive elements from liquid phase, gas phase or their solid particulates on various synthetic organic, inorganic or biological sorbents is looked as one of the options for their remediation. In this context, highly porous materials, termed as metal-organic frameworks (MOFs), have shown promise for efficient capturing of various types of radioactive elements. Major advantages that have been advocated for the application of MOFs in radionuclide sorption are their excellent chemical stability, and their large surface area due to abundant functional groups, and porosity. In this review, recent developments on the application of MOFs for radionuclide sequestration are briefly discussed. Focus has been devoted to address the separation of few crucial radioactive elements such as Th, U, Tc, Re, Se, Sr and Cs from aqueous solutions, which are important for liquid radioactive waste management. Apart from these radioactive metal ions, removal of radionuclide bearing gases such as I₂, Xe, and Kr are also discussed. Aspects related to the interaction of MOFs with the radionuclides are also discussed. Finally, a perspective for comprehensive investigation of MOFs for their applications in radioactive waste management has been outlined.

Synthesis of phosphorylated hyper-cross-linked polymers and their efficient uranium adsorption in water

Uranium (U) is hazardous and radioactive, wastewater containing U(VI) should be treated before being discharged. Here, two novel uranium adsorbents, phosphorylated hyper-cross-linked bisphenol A (PHCP-1) and fluorene-9-bisphenol (PHCP-2) were separately synthesized via Friedel-Crafts reaction followed by phosphorylation using phosphorus oxychloride. PHCPs had a BET surface area (up to 564 m²/g) with pore sizes of 2.2-2.8 nm. These adsorbents were used for the first time for uranium adsorption from water and demonstrated outstanding adsorption performance. PHCP-2 had a great uranium adsorption capacity (297.14 mg/g) and a very fast sorption rate (85% removal rate within 5 min). The adsorption data were well fitted with Freundlich isotherm and the pseudo-second-order kinetic model. PHCPs displayed selective adsorption capacity for U(VI) from solution that including a variety of competing metal ions. The reusability was confirmed through three regeneration cycles. Based on a series of spectroscopic analyses, the mechanism of action between PHCPs and U(VI) is primarily derived from the complex between phosphate functional groups and U (VI). The sorption performance of PHCPs is attributed to their huge specific surface area and the strong complex between phosphate groups and U(VI). These findings suggest that PHCPs could be useful in the effective adsorption of uranium from water.

Metal-Organic-Framework Based Functional Materials for Uranium Recovery: Performance Optimization and Structure/Functionality-Activity Relationships

Uranium recovery has profound significance in both uranium resource acquisition and pollution treatment. In recent years, metal-organic frameworks (MOFs) have attracted much attention as potential uranium adsorbents owing to their tunable structural topology and designable functionalities. This review explores the research progress in representative classic MOFs (MIL-101, UiO-66, ZIF-8/ZIF-67) and other advanced MOF-based materials for efficient uranium extraction in aqueous or seawater environments. The uranium uptake mechanism of the MOF-based materials is refined, and the structure/functionality-property relationship is further systematically elucidated. By summarizing the typical functionalization and structure design methods, the performance improvement strategies for MOF-based adsorbents are emphasized. Finally, the present challenges and potential opportunities are proposed for the breakthrough of high-performance MOF-based materials in uranium extraction.

An anionic potassium-organic framework for selective removal of uranyl ions

Effective and selective removal of radioactive metal ions from aqueous solutions is of great importance due to their harmful effects on humans and other living species. However, it is a big challenge for researchers to develop effective adsorbents with high selectivity and a wide pH application range even if some progress has been achieved. Herein, we report an anionic potassium organic framework (UPC-K1) with protonated dimethylamine (Me2NH2+) residing inside the rhomboid channels. The unique 3D firm structure of UPC-K1 is constructed by the cross-linking of the 2D arrangement using weak K-O bonds (2.9270 Å) and strong hydrogen bonds (1.6498 Å), which endows it with excellent chemical stability in organic solvents, boiling water, and aqueous solution in the pH range 3-10. Based on the cation exchange, depending on pore size selectivity, UPC-K1 shows excellent adsorption performance towards UO22+ in aqueous solutions at 298 K with the following characteristics: (1) effective removal in the pH range 3-10; (2) high selectivity over other metal cations; (3) a high adsorption capacity of 551.4 mg g-1; (4) a rapid adsorption equilibrium within 3 hours under stirring; and (5) effective adsorption at low concentrations, with a residual concentration of 0.69 ppm even at an initial concentration of 10.3 ppm after stirring for 24 hours. These results indicate the great potential of UPC-K1 in the treatment of uranium-containing nuclear wastewater.

Rapid Room-Temperature Preparation of Hierarchically Porous Metal-Organic Frameworks for Efficient Uranium Removal from Aqueous Solutions

The effective removal of uranium from an aqueous solution is a highly valuable process for the environment and health. In this study, we developed a facile and rapid method to synthesize hierarchically porous Cu-BTC (RT-Cu-BTC) using a cooperative template strategy. The as-synthesized RT-Cu-BTC exhibited hierarchically porous structure and excellent thermostability, as revealed by X-ray powder diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. Compared with conventional metal-organic frameworks (MOFs) and zeolites, the obtained RT-Cu-BTC exhibited enhanced adsorption capacity (839.7 mg·g-1) and high removal efficiency (99.8%) in the capture of uranium (VI) from aqueous solutions. Furthermore, the conditions such as adsorbent dose, contact time, and temperature in adsorption of uranium (VI) by RT-Cu-BTC were investigated in detail. The thermodynamics data demonstrated the spontaneous and endothermic nature of the uranium (VI) adsorption process. The Langmuir isotherm and pseudo-second-order models could better reflect the adsorption process of uranium (VI) onto RT-Cu-BTC. In addition, the as-synthesized RT-Cu-BTC showed excellent stability in removing uranium (VI) from an aqueous solution. This work provides a facile and rapid approach for fabricating hierarchically porous MOFs to realize a highly efficient removal of uranium (VI) from aqueous systems.

Preparation of UiO-66-NH2 and UiO-66-NH2/sponge for adsorption of 2,4-dichlorophenoxyacetic acid in water

MOFs are usually used as efficient adsorbents to remove specific pollutants in water. However, because of their poor water stability relatively small particle size, their application in adsorbing and removing pollutants from water is limited. In this paper, with nitrile rubber sponge as the substrate, UiO-66-NH₂/sponge composites were firstly in-situ synthesized and systematically evaluated UiO-66-NH₂ as an adsorbent to remove 2,4-dichlorophenoxyacetic acid from water. This composite could not only remain the adsorption capacity for 2,4-dichlorophenoxyacetic acid of UiO-66-NH₂, but also was much more convenient for separation after the adsorption compared to UiO-66-NH₂. In addition, the mechanism of the adsorption of UiO-66-NH₂ for 2,4-dichlorophenoxyacetic acid were discussed in detail. Electrostatic interaction between UiO-66-NH₂ and 2,4-dichlorophenoxyacetic acid was the main adsorption mechanism. The adsorption was mainly suitable for Langmuir isotherm models, and its maximum adsorption capacity of 2,4-dichlorophenoxyacetic acid was 72.99 mg g^-1.

Rational Construction of Porous Metal-Organic Frameworks for Uranium(VI) Extraction: The Strong Periodic Tendency with a Metal Node

Although metal-organic frameworks (MOFs) have been reported as important porous materials for the potential utility in metal ion separation, coordinating the functionality, structure, and component of MOFs remains a great challenge. Herein, a series of anionic rare earth MOFs (RE-MOFs) were synthesized via a solvothermal template reaction and for the first time explored for uranium(VI) capture from an acidic medium. The unusually high extraction capacity of UO₂²⁺ (e.g., 538 mg U per g of Y-MOF) was achieved through ion-exchange with the concomitant release of Me₂NH₂⁺, during which the uranium(VI) extraction in the series of isostructural RE-MOFs was found to be highly sensitive to the ionic radii of the metal nodes. That is, the uranium(VI) adsorption capacities continuously increased as the ionic radii decreased. In-depth mechanism insight was obtained from molecular dynamics simulations, suggesting that both the accessible pore volume of the MOFs and hydrogen-bonding interactions contribute to the strong periodic tendency of uranium(VI) extraction.

Ammoniated MOF-74(Zn) derivatives as luminescent sensor for highly selective detection of tetrabromobisphenol A

In this study, a porous framework MOF-74(Zn) (Zn₂ (DHBDC)(DMF)(H₂O)₂, H₄dondc = 1, 5-dioxido-2, 6-naphthalenedicarboxylic acid) with open metal sites was successful synthesized. MOF-74(Zn) as a template was grafted on the open metal sites with ethylenediamine (en) named MOF-74(Zn)-en to develop a highly selective and sensitive fluorescence detector for rapid determination of tetrabromobisphenol A (TBBPA). The obtained MOF-74(Zn)-en was well characterized by Fourier Transform Infrared (FT-IR), Scanning Electron Microscopy (SEM) and showed ideal properties of photoluminescence. The fluorescence enhancement showed a good linear relationship with the concentrations of TBBPA in the range of 50-400 μg/L, and its limit of detection could reach to 0.75 μg/L. Furthermore, the possible sensing mechanism of the fluorescence enhancement could be attributed to Förster resonance energy transfer (FRET). The results will provide a convenient and quick method for detection of TBBPA. To the best of my knowledge, this is the first case to detect TBBPA by fluorescence enhancement with MOF derivatives.

Grafting functional groups in metal–organic frameworks for U(vi) sorption from aqueous solutions

Recent highlights of the organic groups-functionalized MOFs for uranium extraction from aqueous solution are discussed.

Graphitic carbon nitride-based materials for photocatalytic reduction of U(vi)

This work reports the photocatalytic reduction of U(vi) using g-C₃N₄-based materials and discusses the factors affecting the photocatalytic reduction of U(vi).

Assorted functionality-appended UiO-66-NH2 for highly efficient uranium(vi) sorption at acidic/neutral/basic pH

Eight assorted functionalities were anchored on UiO-66-NH₂via PSM strategy displaying MOFs with similar framework but variable uranyl binding affinities. The excellent sorption capacity of UiO-66-PO-Ph makes it efficient uranium sorbent material.

Radioactive Uranium Preconcentration via Self-Propelled Autonomous Microrobots Based on Metal-Organic Frameworks

Self-propelled micromachines have recently attracted attention for environmental remediation, yet their use for radioactive waste management has not been addressed. Engineered micromotors that are able to combine highly adsorptive capabilities together with fast autonomous motion in liquid media are promising tools for the removal of nuclear waste, which is one of the most difficult types to manage. Herein, we fabricate self-propelled micromotors based on metal-organic frameworks (MOFs) via template-based interfacial synthesis and show their potential for efficient removal of radioactive uranium. A crucial challenge of the MOF-based motors is their stability in the presence of fuel (hydrogen peroxide) and acidic media. We have ensured their structural stability by Fe doping of zeolitic imidazolate framework-8 (ZIF-8). The implementation of magnetic ferroferric oxide nanoparticles (Fe₃O₄ NPs) and catalytic platinum nanoparticles (Pt NPs) results in the magnetically responsive and bubble-propelled micromotors. In the presence of 5 wt % H₂O₂, these micromotors are propelled at a high speed of ca. 860 ± 230 μm·s^-1 (i.e., >60 body lengths per second), which is significantly faster than that of other microrod-based motors in the literature. These micromotors demonstrate a highly efficient removal of uranium (96%) from aqueous solution within 1 h, with the subsequent recovery under magnetic control, as well as stable recycling ability and high selectivity. Such self-propelled magnetically recoverable micromotors could find a role in the management and remediation of radioactive waste.

Ammoniating Covalent Organic Framework (COF) for High-Performance and Selective Extraction of Toxic and Radioactive Uranium Ions

An ideal porous adsorbent toward uranium with not only large adsorption capacity and high selectivity but also broad applicability even under rigorous conditions is highly desirable but still extremely scarce. In this work, a porous adsorbent, namely [NH4]+[COF-SO3 -], prepared by ammoniating a SO3H-decorated covalent organic framework (COF) enables remarkable performance for uranium extraction. Relative to the pristine SO3H-decorated COF (COF-SO3H) with uranium adsorption capacity of 360 mg g-1, the ammoniated counterpart of [NH4]+[COF-SO3 -] affords ultrahigh uranium uptake up to 851 mg g-1, creating a 2.4-fold enhancement. Such a value is the highest among all reported porous adsorbents for uranium. Most importantly, a large distribution coefficient, K d U, up to 9.8 × 106 mL g-1 is observed, implying extremely strong affinity toward uranium. Consequently, [NH4]+[COF-SO3 -] affords highly selective adsorption of uranium over a broad range of metal ions such as SU/Cs = 821, SU/Na = 277, and SU/Sr = 124, making it as effective uranium adsorbent from seawater, resulting in amazing uranium adsorption capacity of 17.8 mg g-1. Moreover, its excellent chemostability also make it an effective uranium adsorbent even under rigorous conditions (pH = 1, 8, and 3 m acidity).

Metal organic framework (La-PDA) as an effective adsorbent for the removal of uranium(VI) from aqueous solution

A two-dimensional lanthanum(III) porous coordination polymer was prepared, characterized and applied as an efficient adsorbent for the removal of uranium from aqueous solution. Lanthanum(III) was the metal center of MOFs, and the deprotonated anions of pyridine-2,6-dicarboxylic acid (H2PDA), PDA2− was the organic ligand, this MOF was name as La-PDA, which was synthesized by hydrothermal reaction method. Scanning electron microscope (SEM), Fourier transform infrared (FTIR), powder X-ray diffraction (PXRD) and thermal gravimetric (TG) analysis were used for characterization, and the results indicated that the La-PDA composites were successfully prepared. Compared with traditional adsorbents of uranium, La-PDA showed excellent adsorption properties. The adsorption capacity was 247.6 mg g−1 at 298 K and pH 4.0. The adsorption equilibrium achieved within 120 min, and the adsorption process was exothermic and spontaneous. The absorption mechanism of La-PDA was also explored, from the XPS spectra, the pyridine-like nitrogen atoms (C=N–C) and carboxyl oxygen atoms (–COO–) contributed to the adsorption of uranium. The results suggested that PDA2− was a potential ligand of uranium adsorption, La-PDA composites were effective adsorbents for the removal of uranium from aqueous solution.

Two-dimensional copper-based metal-organic frameworks nano-sheets composites: One-step synthesis and highly efficient U(VI) immobilization

In this study, a new kind of thin 2D MOFs nano-sheets (MNS) was successfully prepared through complexation between 2-methylimidazole and Cu(II) by a one-step, and cost-effective route. The structural morphologies can be tuned by adjusting the ratio of MeOH/H₂O. The synthesized MNS (MNS-1, MNS-2, MNS-3 and MNS-4) were fully characterized and the results indicated that the synthesized MNS were freestanding and possess micro-sized lateral dimensions and nanoscale thickness of sub-25 nm. All the obtained MNS display great performance with the adsorption capacity hierarchy of MNS-2 (591.79 mg·g^-1) > MNS-3 (409.49 mg·g^-1) > MNS-4 (387.07 mg·g^-1) > MNS-1 (384.84 mg·g^-1) at pH ˜ 6.0, and 298 K. The thermodynamic parameters indicated the exothermic and spontaneous nature of U(VI) immobilization. The U(VI) immobilization mechanism was achieved through the complexation between U(VI) and C-N(H) /-OH groups. This work supplies a facile and purposeful approach for developing 2D MOFs nano-sheets toward a highly efficient immobilization of U(VI), and it also promotes the preparation of structure-based design of nanomaterials for radionuclide-containing-medium pretreatment.