Filtration of chlorine and hydrogen chloride gas by engineered UiO-66-NH2 metal-organic framework

In situ synthesis of porous metal-organic frameworks NH2-UiO-66 on tea stem biochar and application in odours adsorption

Multiple odour nuisance in livestock farming is a notorious problem that has a significant impact on the living environment of surrounding communities. Adsorbents based on metal-organic framework (MOF) materials show great promise for controlling odour pollution, as they offer a high specific surface area, a controllable structure and an abundance of active sites. However, the MOF formation process is prone to problems such as pore clogging or collapse and reduced porosity, which limits its further application. In this study, a series of odour adsorbents were prepared by in situ growth of NH2-UiO-66 on tea stem biochar (TSBC) using a hydrothermal method and named UiO (Zr)-TSBCx. The physical and chemical properties and composition of UiO (Zr)-TSBCx have been systematically characterized using SEM, TEM, XRD, FT-IR, N2 adsorption-desorption and XPS. The release of odours from the pig farm effluent was monitored using in-situ continuous Proton-Transfer-Reaction Mass Spectrometry (PTR-MS), and the obtained primary compositions were tested for further adsorption. In dynamic adsorption experiments focused on butyric acid, UiO (Zr)-TSBC2 showed a high adsorption capacity of 3.99 × 105 μg/g and exceptional structural stability. UiO (Zr)-TSBC2 showed variable adsorption efficiencies for different odorous gases, with the best performance for the removal of ammonia, toluene and butyric acid. It also demonstrated the ability to rapidly mitigate instantaneous high concentrations of hydrogen sulfide (H2S), methanethiol and toluene resulting from agitation. Additionally, based on the relationship between the adsorption amount and the structural characteristics of the adsorbent as well as the nature of the odours, a possible adsorption mechanism of UiO (Zr)-TSBC2 for a variety of odours released from pig farm effluent was proposed. This work demonstrates a novel approach to promote deodorization applications in livestock and poultry farming environments by the in-situ growth of NH2-UiO-66 on biochar prepared from tea stem.

Tandem Efficient Bromine Removal and Silver Recovery by Resorcinol-Formaldehyde Resin Nanoparticles

Halogen wastewater greatly threatens the health of human beings and aquatic organisms due to its severe toxicity, corrosiveness, and volatility. Efficient bromine removal is therefore urgently required, while existing Br₂-capture materials often face challenges from limited water stability and possible halogen leaking. We report a facile and efficient aqueous Br₂ removal method using submicron resorcinol-formaldehyde (RF) resin nanoparticles (NPs). The abundant aromatic groups dominate the Br₂ removal by substitution reactions. An excellent Br₂ conversion capacity of 7441 mg g_RF^-1 was achieved by RF NPs that outperform state-of-the-art materials by ∼2-fold, along with advantages including good water stability, low cost, and easy fabrication. Two recycling-coupled (electrochemical or H₂O₂-involved) Br₂ removal routes further reveal the feasibility of in-depth halogen removal by RF NPs. The brominated resin can be downstream upcycled for silver recovery, realizing the harvesting of precious metal, reducing of heavy-metal pollution, and resource utilization of brominated resin.

Facile synthesis of direct Z-scheme UiO-66-NH2/PhC2Cu heterojunction with ultrahigh redox potential for enhanced photocatalytic Cr(VI) reduction and NOR degradation

Z-scheme heterojunction-based photocatalysts typically have robust removal efficiencies for water contaminants. Herein, we employed p-type PhC₂Cu and n-type UiO-66-NH₂ to develop a direct Z-scheme UiO-66-NH₂/PhC₂Cu photocatalyst with an ultrahigh redox potential for Cr(VI) photoreduction and norfloxacin (NOR) photodegradation. Moreover, UV-vis diffuse reflectance, photoelectrochemical measurements, photoluminescence (PL) spectra and electron spin resonance (ESR) technique revealed that the UiO-66-NH₂/PhC₂Cu composite boosted light capturing capacities to promote photocatalytic efficiencies. Strikingly, the optimized UiO-66-NH₂/PhC₂Cu50 wt% rapidly reduced Cr(VI) (96.2%, 15 min) and degraded NOR (97.9%, 60 min) under low-power blue LED light. In addition, the UiO-66-NH₂/PhC₂Cu photocatalyst also exhibited favorable mineralization capacity (78.4%, 120 min). Benefitting from the enhanced interfacial electron transfer and ultrahigh redox potential of the Z-scheme heterojunction, the UiO-66-NH₂/PhC₂Cu photocatalyst greatly enhanced the separation efficacies of photogenerated carriers. This resulting abundance of active species (e.g., e^-, h⁺, O₂^•-, and •OH) were generated to photo-reduce Cr(VI) and photo-oxidize NOR. Base on the identified intermediates, four degradation pathways of NOR were proposed. Finally, the Z-scheme mechanism were systematically confirmed through X-ray photoelectron spectroscopy (XPS), ESR, cyclic voltammetry (CV) tests, and photodeposition techniques.

Reactive Chlorine Capture by Dichlorination of Alkene Linkers in Metal-Organic Frameworks

Chlorine (Cl₂) is a toxic and corrosive gas that is both an essential reagent in industry and a potent chemical warfare agent. Materials that can strongly bind Cl₂ at low pressures are essential for industrial and civilian personal protective equipment (PPE). Herein, we report the first examples of irreversible Cl₂ capture via the dichlorination of alkene linkages in Zr-based metal-organic frameworks. Frameworks constructed from fumarate (Zr-fum) and stilbene (Zr-stilbene) linkers retain long-range order and accessible porosity after alkene dichlorination. In addition, energy-dispersive X-ray spectroscopy reveals an even distribution of Cl throughout both materials after Cl₂ capture. Cl₂ uptake experiments reveal high irreversible uptake of Cl₂ (>10 wt %) at low partial pressures (<100 mbar), particularly in Zr-fum. In contrast, traditional porous carbons mostly display reversible Cl₂ capture, representing a continued risk to users after exposure. Overall, our results support that alkene dichlorination represents a new pathway for reactive Cl₂ capture, opening new opportunities for binding this gas irreversibly in PPE.

Surface, Interface and Structure Optimization of Metal-Organic Frameworks: Towards Efficient Resourceful Conversion of Industrial Waste Gases

Industrial waste gas emissions from fossil fuel over-exploitation have aroused great attention in modern society. Recently, metal-organic frameworks (MOFs) have been developed in the capture and catalytic conversion of industrial exhaust gases such as SO₂ , H₂ S, NO_x , CO₂ , CO, etc. Based on these resourceful conversion applications, in this review, we summarize the crucial role of the surface, interface, and structure optimization of MOFs for performance enhancement. The main points include (1) adsorption enhancement of target molecules by surface functional modification, (2) promotion of catalytic reaction kinetics through enhanced coupling in interfaces, and (3) adaptive matching of guest molecules by structural and pore size modulation. We expect that this review will provide valuable references and illumination for the design and development of MOF and related materials with excellent exhaust gas treatment performance.

Extrusion-Spheronization of UiO-66 and UiO-66_NH2 into Robust-Shaped Solids and Their Use for Gaseous Molecular Iodine, Xenon, and Krypton Adsorption

The use of an extrusion-spheronization process was investigated to prepare robust and highly porous extrudates and granules starting from UiO-66 and UiO-66_NH₂ metal-organic framework powders. As-produced materials were applied to the capture of gaseous iodine and the adsorption of xenon and krypton. In this study, biosourced chitosan and hydroxyethyl cellulose (HEC) are used as binders, added in low amounts (less than 5 wt % of the dried solids), as well as a colloidal silica as a co-binder when required. Characterizations of the final shaped materials reveal that most physicochemical properties are retained, except the textural properties, which are impacted by the process and the proportion of binders (BET surface area reduction from 5 to 33%). On the other hand, the mechanical resistance of the shaped materials toward compression is greatly improved by the presence of binders and their respective contents, from 0.5 N for binderless UiO-66 granules to 17 N for UiO-66@HEC granules. UiO-66_NH₂-based granules demonstrated consequent iodine capture after 48 h, up to 527 mg/g, in line with the pristine UiO-66_NH₂ powder (565 mg/g) and proportionally to the retaining BET surface area (-5% after shaping). Analogously, the shaped materials presented xenon and krypton sorption isotherms correlated to their BET surface area and high predicted xenon/krypton selectivity, from 7.1 to 9.0. Therefore, binder-aided extrusion-spheronization is an adapted method to produce shaped solids with adequate mechanical resistance and retained functional properties.

Enhanced Adsorption and Mass Transfer of Hierarchically Porous Zr-MOF Nanoarchitectures toward Toxic Chemical Removal

Zirconium-based metal-organic frameworks (Zr-MOFs) have shown tremendous prospects as highly efficient adsorbents against toxic chemicals under ambient conditions. Here, we report for the first time the enhanced toxic chemical adsorption and mass transfer properties of hierarchically porous Zr-MOF nanoarchitectures. A general and scalable sol-gel-based strategy combined with facile ambient pressure drying (APD) was utilized to construct MOF-808, MOF-808-NH₂, and UiO-66-NH₂ xerogel monoliths, denoted as G808, G808-NH₂, and G66-NH₂, respectively. The resulting Zr-MOF xerogels demonstrated 3D porous networks assembled by nanocrystal aggregates, with substantially higher mesoporosities than the precipitate analogues. Microbreakthrough tests on powders and tube breakthrough experiments on engineered granules were conducted at different relative humidities to comprehensively evaluate the NO₂ adsorption capabilities. The Zr-MOF xerogels showed considerably better NO₂ removal abilities than the precipitates, whether intrinsically or under simulated respirator canister/protection filter environment conditions. Multiple physicochemical characterizations were conducted to illuminate the NO₂ filtration mechanisms. Analysis on adsorption kinetics and mass transfer patterns in Zr-MOF xerogels was further performed to visualize the underlying structure-activity relationship using the gravimetric uptake and zero length column methods with cyclohexane and acetaldehyde as probes. The results revealed that the synergy of hierarchical porosities and nanosized crystals could effectively expedite the intracrystalline diffusion for the G66-NH₂ xerogel as well as alleviate the surface resistance for the G808-NH₂ xerogel, which led to accelerated overall adsorption uptake and thus enhanced performance toward toxic chemical removal.

A hierarchical structured steel mesh decorated with metal organic framework/graphene oxide for high-efficient oil/water separation

A hierarchical structured steel mesh decorated with metal organic framework (UiO-66-NH₂) nanoparticles/graphene oxide (GO) nanosheets was successfully prepared via a simple self-assemble method. Because water molecules tend to build hydrogen bonds with the amine, carboxyl and hydroxyl functional groups of UiO-66-NH₂/GO hierarchical structure, the hierarchical structure can easily capture water and tightly lock the water to build a stable water layer on the steel mesh surface and block oil in contact with the steel mesh. Therefore, the obtained hierarchical structured steel mesh exhibits super-hydrophilicity, underwater super-oleophobicity, excellent oil resistance and outstanding oil/water separation performance with a superior high permeating flux (54,500 L m^-2  h^-1) and rejection (>99.9%) under gravity force, indicating the mesh possesses great potential for treating oily wastewater.

Metal organic frameworks as potent treatment media for odorants and volatiles in air

The presence of odorants/volatiles in the air exerted various types of negative impacts on the surrounding environment. Their concentrations in indoor/outdoor air, if exceeding the threshold level, may not only affect human health but also deteriorate living standards. To maintain and enhance the quality of life, a better tool for the removal of these molecules is in great demand. Metal-organic frameworks (MOFs) and their associated materials offer an excellent platform for the treatment of odorants/volatiles in air (and water) systems. The diversity of ligands and metal ions in their frame imparts large loading capacities and excellent selectivity for a variety of targetable VOCs and/or odorants. This review discusses the use of MOFs and their composites to treat odorants/volatile molecules in gaseous media, with extensive discussion of their adsorptive uptakes, along with methods for their synthesis and regeneration. Moreover, the progression of odorant/volatile removal by MOFs is considered, with a special note on future directions in this emerging research field.

Adsorption and Detection of Hazardous Trace Gases by Metal-Organic Frameworks

The quest for advanced designer adsorbents for air filtration and monitoring hazardous trace gases has recently been more and more driven by the need to ensure clean air in indoor, outdoor, and industrial environments. How to increase safety with regard to personal protection in the event of hazardous gas exposure is a critical question for an ever-growing population spending most of their lifetime indoors, but is also crucial for the chemical industry in order to protect future generations of employees from potential hazards. Metal-organic frameworks (MOFs) are already quite advanced and promising in terms of capacity and specific affinity to overcome limitations of current adsorbent materials for trace and toxic gas adsorption. Due to their advantageous features (e.g., high specific surface area, catalytic activity, tailorable pore sizes, structural diversity, and range of chemical and physical properties), MOFs offer a high potential as adsorbents for air filtration and monitoring of hazardous trace gases. Three advanced topics are considered here, in applying MOFs for selective adsorption: (i) toxic gas adsorption toward filtration for respiratory protection as well as indoor and cabin air, (ii) enrichment of hazardous gases using MOFs, and (iii) MOFs as sensors for toxic trace gases and explosives.

Tailoring the Adsorption and Reaction Chemistry of the Metal-Organic Frameworks UiO-66, UiO-66-NH2, and HKUST-1 via the Incorporation of Molecular Guests

Metal-organic frameworks (MOFs) are versatile materials highly regarded for their porous nature. Depending on the synthetic method, various guest molecules may remain in the pores or can be systematically loaded for various reasons. Herein, we present a study that explores the effect of guest molecules on the adsorption and reactivity of the MOF in both the gas phase and solution. The differences between guest molecule interactions and the subsequent effects on their activity are described for each system. Interestingly, different effects are observed and described in detail for each class of guest molecules studied. We determine that there is a strong effect of alcohols with the secondary building unit of UiO MOFs, while Lewis bases have an effect on the reactivity of the -NH₂ group in UiO-66-NH₂ and adsorption by the coordinatively unsaturated copper sites in HKUST-1. These effects must be considered when determining synthesis and activation methods of MOFs toward various applications.