Cathodic photoelectrochemical detection of PCB101 in environmental samples with high sensitivity and selectivity

Ultrasensitive monitoring of PCB77 in environmental samples using a visible-driven photoelectrochemical sensing platform coupling with exonuclease I assisted in target recycling

Due to the urgent need for detecting trace amounts of 3,3',4,4'-tetrachlorobiphenyl (PCB77) in the environment, we have developed an efficient and visible-driven photoelectrochemical (PEC) sensing platform based on carbon quantum dots (CQDs) modified titanium dioxide nanorods (TiO2 NRs), coupling with exonuclease I (Exo I) assisted in target recycling for significant signal amplification. CQDs/TiO2 NRs with high visible-light absorption ability and electron-hole separation efficiency is used as photoactive substrate for anchoring anti-PCB77 aptamer and its complementary DNA (cDNA). With the addition of PCB77, the specific interaction between PCB77 and its aptamer forces aptamer to separate from the electrode surface, resulting in an increase in photocurrent density. Adding Exo I in the test system, a self-catalytic target cycle was motivated, which significantly increased the PEC signal by more than twice, achieving signal amplification. The relationship between the photocurrent density changes and the concentrations of PCB77 are utilized to achieve quantitative detection of PCB77. The designed PEC sensing platform has good analytical performance with a detection limit as low as 0.33 pg L-1, high selectivity and stability. Moreover, the PEC sensor is successfully used to evaluate the content of PBC77 in the environment samples. The established sensing platform provides a simple and efficient method for detecting trace amounts of PCB77 in the environment.

A Review on Tetrabromobisphenol A: Human Biomonitoring, Toxicity, Detection and Treatment in the Environment

Tetrabromobisphenol A (TBBPA) is a known endocrine disruptor employed in a range of consumer products and has been predominantly found in different environments through industrial processes and in human samples. In this review, we aimed to summarize published scientific evidence on human biomonitoring, toxic effects and mode of action of TBBPA in humans. Interestingly, an overview of various pretreatment methods, emerging detection methods, and treatment methods was elucidated. Studies on exposure routes in humans, a combination of detection methods, adsorbent-based treatments and degradation of TBBPA are in the preliminary phase and have several limitations. Therefore, in-depth studies on these subjects should be considered to enhance the accurate body load of non-invasive matrix, external exposure levels, optimal design of combined detection techniques, and degrading technology of TBBPA. Overall, this review will improve the scientific comprehension of TBBPA in humans as well as the environment, and the breakthrough for treating waste products containing TBBPA.

P3HT-PbS nanocomposites with mimicking enzyme as bi-enhancer for ultrasensitive photocathodic biosensor

Photocathodic biosensor has great capability in anti-interference from reductive substances, however, the low signal intensity of photoactive species with inferior detection sensitivity restricts its wide application. In this work, the P3HT-PbS nanocomposites were synthesized as signal tags, by integrating with target-trigger generated hemin/G-quadruplex nanotail as bi-enhancer to significantly apmplify the photocurrent, an ultrasensitive photocathodic biosensor was proposed for detection of β2-microglobulin (β2-MG). Impressively, P3HT with cathode signal is an attractive polymer consisted of substantial thiophene groups with high absorption coefficient and mobility of photo-generated holes, which could anchor with the PbS dots as sensitizer, providing a high charge mobility and strong photosensitivity. More importantly, target-trigger generated hemin/G-quadruplexes could accept the electron from illuminated photoactive species through the conversion of Fe(III)/Fe(II) in hemin, effectively reducing charge recombination rate as well as accelerating the generation of electron acceptor O₂ in the assistant of H₂O₂. Moreover, hemin/G-quadruplexes inherited the HRP mimicking catalytic capability that further improved the produce of plentiful O₂. As a result, PEC cathode signal was significantly enhanced for sensitive analysis of β2-MG protein with a good detection range of 0.1 pg/mL to 100 ng/mL. It would provide a path for establishing PEC platform with excellent anti-interference ability and extend the application of photoelectrochemical (PEC) biosensor in bioanalysis and early disease diagnosis.

Ultrasensitive detection of PCB77 based on Exonuclease III-powered DNA walking machine

In view of the urgent need to determine polychlorinated biphenyls (PCBs) in the environment, we report a simple and sensitive electrochemical aptasensor to detect 3,3',4,4'-tetrachlorobiphenyl (PCB77) based on Exonuclease III-powered Deoxyribonucleic Acid (DNA) walking machine using poly (diallyldimethylammonium chloride) (PDDA), which was functionalized hollow porous graphitic carbon nitride/ Ni-Co hollow nanoboxes/ Au-Pd-Pt nanoflowers composite material. Upon the addition of PCB77, the specific binding between PCB77 and the aptamer (Apt) could trigger the Exo III-assisted cyclic amplification process and release unlocking probes to deblock the Swing arm/Blocker duplex. Finally, the hybridized hairpin 3 (HP3), a short oligonucleotide, was left on the electrode via Exo III digestion of hybridized HP2, and thus a strong methylene blue (MB) signal was obtained. As expected, the proposed aptasensor exhibits exceptional PCB77 detection performances with a very low detection limit of 5.13 pg/L and a wide linear range of 0.01-100 ng/L based on the calibration curve. Moreover, the aptasensor presents a high level of selectivity and stability, with an acceptable degree of reproducibility. The results of this study have indicated that the proposed aptasensor has great potential application prospects, as demonstrated by its successful use in real environmental water samples.

Target triggered ultrasensitive electrochemical polychlorinated biphenyl aptasensor based on DNA microcapsules and nonlinear hybridization chain reaction

In this work, we demonstrated an ultrasensitive detection platform for polychlorinated biphenyls (PCBs) based on DNA microcapsules and a nonlinear hybridization chain reaction (NHCR). In the process, first, electrochemical signal molecules (Methylene Blue, MB) were sealed in the prepared DNA microcapsules. In the presence of PCB-72, DNA microcapsules could be dissociated with the conjugation of the aptamer and target, and meanwhile, the released DNA strand could initiate the NHCR and trigger the chain branching growth of DNA dendrimers. Because the released MBs were intercalated into the DNA dendrimer, enhanced electrochemical responses could be detected. This method exhibited ultrahigh sensitivity to PCB-72 with a detection limit of 0.001 ng mL-1. Furthermore, the present aptasensor was also capable of discriminating different PCB congeners. Therefore, the devised label-free and enzyme-free amplification electrochemical aptasensor strategy has great potential for the detection of PCB-72 in real samples, and this strategy may also become an attractive alternative for sensitive and selective small molecule, protein, nucleic acid and nuclease activity detection.

Visible light-activated self-powered photoelectrochemical aptasensor for ultrasensitive chloramphenicol detection based on DFT-proved Z-scheme Ag2CrO4/g-C3N4/graphene oxide

A visible light self-powered photoelectrochemical (PEC) aptasensor based on silver chromate particles, graphitic carbon nitride nanosheets and graphene oxide sheets (Ag₂CrO₄/g-C₃N₄/GO) for the ultrasensitive detection of chloramphenicol (CAP) was reported in this work. g-C₃N₄ was considered to be the fundamental photoelectric material because of its great oxidation ability of photogenerated hole as well as excellent biocompatibility and low toxicity. However, the narrow light absorption range and rapid carrier recombination rate limit the application of pure g-C₃N₄. Herein, Ag₂CrO₄ and GO as photosensitizer were introduced to improve the photoelectric properties of g-C₃N₄. The photocurrent of the developed ternary composite was about 3 times higher than that of pristine g-C₃N₄, which proves it can be used as a suitable photoelectric active material. Moreover, the mechanism of Z-scheme electron transfer path was proved by density functional theory (DFT) calculation. The fabricated PEC aptasensor exhibited high sensitivity toward CAP with a wide liner response of 0.5 pM to 50 nM and a detection limit of 0.29 pM. The specific recognition mechanism and excellent sensing performance indicated this aptasensor could serve as a useful tool for selective and ultrasensitive CAP detection in practical analysis.

A dual mode photoelectrochemical sensor for nitrobenzene and L-cysteine based on 3D flower-like Cu2SnS3@SnS2 double interfacial heterojunction photoelectrode

In this work, 3D hierarchical Cu₂SnS₃@SnS₂ flower assembled from nanopetals with sandwich-like Cu₂SnS₃-SnS₂-Cu₂SnS₃ double interfacial heterojunction was successfully designed and synthesized on fluoride doped tin oxide (FTO) for photoelectrochemical (PEC) sensor by in situ electrodeposition p-type Cu₂SnS₃ nanoparticles on both inner and outer surfaces of n-type SnS₂ nanopetals. The unique double interfacial heterojunction simultaneously combines 3D flower-like architectures to drastically increase the light trapping and absorption in visible-near infrared range (Vis-NIR), and dramatically inhibites the charge carrier recombination, which is crucial for boosting the PEC activity. Benefitting from the shape and compositional merits, the Cu₂SnS₃@SnS₂ heterojunction possess dual-mode signal by controlling the electrodeposition time to manipulate the composition ratio of Cu₂SnS₃ and SnS₂. The Cu₂SnS₃@SnS₂/FTO electrode not only exhibits excellent photoeletro-reduction capacity for ultra-sensitive sensing trace persistent organic pollutant (nitrobenzene, NB), but also presents photoeletro-oxidization activity for high selective detection of L-cysteine (L-Cys) without any auxiliary enzyme under the light illumination. Dual mode sensor displayed superb performance for the detection of NB/L-Cys, showing a wide linear range from 100 pM to 300 μM/10 nM to 100 μM and a low detection limit (3S/N) of 68 pM/8.5 nM, respectively. Such a tunable double interfacial heterojunction design opened up new avenue for constructing multifunction PEC sensing platform.

Enhanced Photoelectrocatalytic Reduction and Removal of Atrazine: Effect of Co-Catalyst and Cathode Potential

Photoelectrocatalytic (PEC) reduction and removal of atrazine, one typical endocrine disruptor chemical, was achieved on Pd quantum dots modified TiO₂ nanotubes (PdQDs@TiO₂NTs) under regulating potentials. Compared with that on TiO₂NTs, the PEC reduction efficiency of atrazine on PdQDs@TiO₂NTs significantly increased, mainly attributed to the reduced electron transfer resistance, longer lifetime of the photogenerated electrons and the faster electron injection from the catalyst to atrazine in the solution. Meanwhile, PdQDs could also function as cocatalyst so that the electrocatalytic activity of PdQDs@TiO₂NTs was evidently improved. Moreover, the investigation indicated that the applied potential not only played important role in accelerating the separation of photogenerated electrons and holes, but also with the increment of the cathodic potential, the PEC reduction mechanism of atrazine underwent the variation of electro-assisted photocatalysis, synergetic photoelectro-catalysis, and photoassisted electro-catalysis. A highest atrazine PEC reduction efficiency was achieved as 99.5% on PdQDs@TiO₂NTs in about 5 h under the potential of -1.3 V vs. SCE, whereas the highest synergetic effect of photo- and electro- catalysis was achieved at a lower potential of -0.9 V vs. SCE.

Design of a simple and novel photoelectrochemical aptasensor for detection of 3,3',4,4'-tetrachlorobiphenyl

In view of the urgent need of determining polychlorinated biphenyls in the environment, we developed a highly sensitive and selective photoelectrochemical (PEC) aptasensor for determination of 3,3',4,4'-tetrachlorobiphenyl (PCB77) by immobilizing aptamer on N-doped TiO₂ nanotubes (N-doped TiO₂ NTs). To improve analytical performance of the PEC sensor, the complementary DNA functionalized CdS quantum dots (DNA-CdS QDs) were introduced onto N-doped TiO₂ NTs by hybridization. In addition of PCB77, owing to high affinity of aptamer to PCB77, PCB77-aptamer complexes were formed by being bound of PCB77 whilst DNA-CdS QDs were released from the sensing surface. The complexes with poor conductivity hindered the interfacial electron transfer, leading to the photocurrent decrease. The more important is the release of DNA-CdS QDs enhanced the photocurrent decrease, playing the role of signal amplification. The photocurrent change was utilized to detect PCB77 quantitatively. The PEC aptasensor exhibited excellent analytical performance for detection of PCB77 with wide linear range of 0.1-100 ng/L and a low detection limit of 0.1 ng/L. It manifested outstanding selectivity for PCB77 in control experiments by employing six interferents which had similar structure or coexisted with PCB77. Besides, the PEC aptasensor was used to detect the content of PBC77 in the environment.