Linear and crosslinked Polyurethanes based catalysts for reduction of methylene blue

Threefold enhanced photodegradation of methylene blue using MgO composite with minimum Nd2O3: finding the sweet spot

Removal of organic dyes like methylene blue (MB) from industrial effluents serves as potential source of potable water. Photocatalytic degradation using sustainable catalyst is deemed to be an affordable solution. In this work, Nd2O3/MgO nanocomposite with different compositions (1, 3, and 5wt% Nd2O3 with MgO) have been achieved using hydrothermal synthesis and characterized extensively. Interestingly, increasing Nd2O3 proportion (1-5%) enhances light absorption, and decreases band gap and electron-hole recombination. The efficacy of the photocatalysts is tested with the degradation of MB dye, through optimizing Nd2O3/MgO proportion, contact time, catalyst dose, and pH. Interestingly, control experiments reveal that 5wt% Nd2O3/MgO achieve 99.6% degradation of MB in 90 min at pH 7, compared to 88.8% with bare MgO under same condition. Kinetic data show that 5wt% Nd2O3/MgO exhibits ca. 3 times higher degradation rate compared to MgO. For the first time, our work enable MgO-based sustainable photocatalyst development with minimum (5 wt%) rare-earth combination to achieve excellent photocatalytic degradation performance.

Chitosan-Grafted Polyacrylic Acid-Doped Copper Oxide Nanoflakes Used as a Potential Dye Degrader and Antibacterial Agent: In Silico Molecular Docking Analysis

This study examined the catalytic and bactericidal properties of polymer-doped copper oxide (CuO). For this purpose, a facile co-precipitation method was used to synthesize CuO nanostructures doped with CS-g-PAA. Various concentrations (2, 4, and 6%) of dopants were systematically incorporated into a fixed amount of CuO. The prepared samples were analyzed by different optical, structural, and morphological characterizations. Field emission scanning electron microscopy and transmission electron microscopy micrographs indicated that doping transformed CuO's agglomerated rod-like surface morphology to form nanoflakes. UV-vis spectroscopy revealed that the optical spectra of the samples exhibit a redshift after doping, leading to a decrease in band gap energy from 3.3 to 2.5 eV. The purpose of the study was to test the catalytic activity of pristine and CS-g-PAA doped CuO for the degradation of methylene blue in acidic, basic, and neutral conditions using NaBH₄ as a reducing agent in an aqueous medium. Furthermore, antibacterial activity was evaluated against Gram-positive and Gram-negative bacteria, namely, Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Overall, enhanced bactericidal performance was observed upon doping CS-g-PAA into CuO, i.e., 4.25-6.15 and 4.40-8.15 mm against S. aureus and 1.35-4.20 and 2.25-5.25 mm against E. coli at the lowest and highest doses, respectively. The relevant catalytic and bactericidal action mechanisms of samples are also proposed in the study. Moreover, in silico molecular docking studies illustrated the role of these prepared nanomaterials as possible inhibitors of FabH and FabI enzymes of the fatty acid biosynthetic pathway.

Ligustrum lucidum Leaf Extract-Assisted Green Synthesis of Silver Nanoparticles and Nano-Adsorbents Having Potential in Ultrasound-Assisted Adsorptive Removal of Methylene Blue Dye from Wastewater and Antimicrobial Activity

Present study was conducted to investigate the adsorption and ultrasound-assisted adsorption potential of silver nanoparticles (AgNPs) and silver nanoparticles loaded on chitosan (AgCS composite) as nano-adsorbents for methylene blue (MB) removal. AgNPs were synthesized using leaf extract of Ligustrum lucidum, which were incorporated on the chitosan’s surface for modification. UV−Vis Spectroscopy, FTIR, XRD, SEM, and EDX techniques were used to confirm the synthesis and characterization of nanomaterials. Batch adsorption and sono-adsorption experiments for the removal of MB were executed under optimal conditions; for fitting the experimental equilibrium data, Langmuir and Freundlich’s isotherm models were adopted. In addition, the antimicrobial potential of the AgNPs and AgCS were examined against selected bacterial and fungal strains. UV−Vis spectroscopy confirmed AgNPs synthesis from the leaf extract of L. lucidum used as a reducer, which was spherical as exposed in the SEM analysis. The FTIR spectrum illustrated phytochemicals in the leaf extract of L. lucidum functioning as stabilizing agents around AgNPs and AgCS. Whereas, corresponding crystalline peaks of nanomaterial, including a signal peak at 3 keV indicating the presence of silver, were confirmed by XRD and EDX. The Langmuir model was chosen as an efficient model for adsorption and sono-adsorption, which exposed that under optimum conditions (pH = 6, dye initial concentration = 5 mg L−1, adsorbents dosage = 0.005 g, time = 120 min, US power 80 W), MB removal efficiency of AgNPs was >70%, using ultrasound-assisted adsorption compared to the non-sonicated adsorption. Furthermore, AgNPs exhibited promising antibacterial potential against Staphylococcus aureus with the maximum zone of inhibition (14.67 ± 0.47 mm). It was concluded that the green synthesis approach for the large-scale production of metallic nanoparticles is quite effective and can be recommended for efficient and cost-effective way to eradicate dyes, particularly from textile wastewater.

Recent advances in the polyurethane-based adsorbents for the decontamination of hazardous wastewater pollutants

The pollution of aquatic systems with noxious organic and inorganic contaminants is a challenging problem faced by most countries. Water bodies are contaminated with diverse inorganic and organic pollutants originating from various diffuse and point sources, including industrial sectors, agricultural practices, and domestic wastes. Such hazardous water pollutants tend to accumulate in the environmental media including living organisms, thereby posing significant environmental health risks. Therefore, the remediation of wastewater pollutants is a priority. Adsorption is considered as the most efficient technique for the removal of pollutants in aqueous systems, and the deployment of suitable adsorbents plays a vital role for the sustainable application of the technique. The present review gives an overview of polyurethane foam (PUF) as an adsorbent, the synthesis approaches of polyurethane, and characterization aspects. Further emphasis is on the preparation of the various forms of polyurethane adsorbents, and their potential application in the removal of various challenging water pollutants. The removal mechanisms, including adsorption kinetics, isotherms, thermodynamics, and electrostatic and hydrophobic interactions between polyurethane adsorbents and pollutants are discussed. In addition, regeneration, recycling and disposal of spent polyurethane adsorbents are reported. Finally, key knowledge gaps on synthesis, characterization, industrial applications, life cycle analysis, and potential health risks of polyurethane adsorbents are discussed.

Green synthesis of zinc oxide nanoparticles using Phoenix dactylifera waste as bioreductant for effective dye degradation and antibacterial performance in wastewater treatment

Production of multi-functional zinc oxide nanoparticles (ZnO-NPs) for wastewater treatment through green-approaches is a desirable alternative for conventional synthesis routes. Biomass waste valorization for nanoparticles synthesis has received increased research attention. The present study reports date pulp waste (DPW) utilization as an effective bio-reductant for green-synthesis of ZnO-NPs. A simple and eco-friendly process with low reaction time and calcination temperature was adopted for DPW mediated ZnO-NPs (DP-ZnO-NPs) synthesis. Microscopic investigations of DP-ZnO-NPs confirmed the non-agglomeration and spherical nature of particles with mean diameter of 30 nm. EDX and XPS analysis defined the chemical composition and product purity of DP-ZnO-NPs. UV and photoluminescence studies exhibited surface plasmonic resonance at 381 nm and fluorescent nature of DP-ZnO-NPs. FTIR studies established a formation mechanism outline for DP-ZnO-NPs. XRD and Raman investigations confirmed the crystalline and hexagonal wurtzite phase of DP-ZnO-NPs. DSC/TG analysis displayed the thermal stability of DP-ZnO-NPs with <10 wt% loss upto 700 °C. Photocatalytic degradation of hazardous methylene blue and eosin yellow dyes using DP-ZnO-NPs, showed rapid decomposition rate with 90 % degradation efficiency. Additionally, DP-ZnO-NPs demonstrated significant antibacterial effects on various pathogenic bacteria in terms of zone-of-inhibition measured by disc-diffusion method. Thus, the as-prepared DP-ZnO-NPs is suitable for industrial wastewater treatment.

Enhancing catalytic potential of gold nanoparticles by linear and cross-linked polyurethane blending

This work describes the synthesis of gold nanoparticles (AuNPs) and their subsequent stabilization using a water-borne polyurethane matrix of micro-particles (Au/PU) by a heating method. Composites were prepared both from linear and cross-linked polyurethane (LPU and CPU). Catalytic activities of synthesized composites exhibiting 226.4 nm size were evaluated for reduction of Congo red dye. More than 90% Congo red degradation was achieved in just 6 minutes with Au/LPU. Under similar conditions, 30% of dye was degraded with Au/CPU composite in 5 minutes. The effects of different variables such as concentration of dye, catalyst dose and concentration of reagents have been optimized. The degradation process followed first order kinetics. The most efficient composite (Au/LPU) was characterized using UV/Vis, FTIR, SEM, XRD and DLS techniques. The excellent catalytic activity can be attributed to the polyurethane matrix making the dye available to catalytic sites (AuNPs).

This work describes the synthesis of gold nanoparticles (AuNPs) and their subsequent stabilization using a water-borne polyurethane matrix of micro-particles (Au/PU).

Simultaneous degradation and reduction of multiple organic compounds by poly(vinyl imidazole) cryogel-templated Co, Ni, and Cu metal nanoparticles

Simultaneous degradation of methylene blue, eosin Y and 4-nitrophenol reduction by p(vinyl imidazole)–Co cryogel composite catalyst in aqueous environments.

Sugar sources as Co-substrates promoting the degradation of refractory dye: A comparative study

Four sugar sources were used as co-substrates to promote the degradation of a selected refractory dye reactive black 5 (RB5) by the natural bacterial flora DDMZ1. The boosting performance of the four sugar sources on RB5 decolorization ranked as: fructose > sucrose > glucose > glucose + fructose. Kinetic results of these four co-metabolism systems agreed well with a first-order kinetic model. Four sugar sources stimulated the extracellular azoreductase secretion causing enhanced enzyme activity. An increased formation of low molecular weight intermediates was caused by the addition of sugar sources. The toxicity of RB5 degradation products was significantly reduced in the presence of sugar sources. The bacterial community structure differed remarkably as a result of sugar sources addition. For a fructose addition, a considerably enriched population of the functional species Burkholderia-Paraburkholderia and Klebsiella was noted. The results enlarge our knowledge of the microkinetic and microbiological mechanisms of co-metabolic degradation of refractory pollutants.

Highly Uniform and Porous Polyurea Microspheres: Clean and Easy Preparation by Interface Polymerization, Palladium Incorporation, and High Catalytic Performance for Dye Degradation

Owing to their high specific surface area and low density, porous polymer materials are of great importance in a vast variety of applications, particularly as supports for enzymes and transition metals. Herein, highly uniform and porous polyurea microspheres (PPM), with size between 200 and 500 μm, are prepared by interfacial polymerization of toluene diisocyanate (TDI) in water through a simple microfluidic device composed of two tube lines, in one of which TDI is flowing and merged to the other with flowing aqueous phase, generating therefore TDI droplets at merging. The polymerization starts in the tube while flowing to the reactor and completed therein. This is a simple, easy and effective process for preparation of uniform PPM. Results demonstrate that the presence of polyvinyl alcohol in the aqueous flow is necessary to obtain uniform PPM. The size of PPM is readily adjustable by changing the polymerization conditions. In addition, palladium is incorporated in PPM to get the composite microspheres Pd@PPM, which are used as catalyst in degradation of methylene blue and rhodamine B. High performance and good reusability are demonstrated. Monodispersity, efficient dye degradation, easy recovery, and remarkable reusability make Pd@PPM a promising catalyst for dye degradation.

Ecofriendly Reduction of Methylene Blue with Polyurethane Catalyst

A number of physical, chemical, and biological technologies have been developed to address the issue of synthetic dyes in wastewater. One of the important chemical methods involves reduction of these stringent pollutants into less hazardous products. In this study, a cross-linked polyurethane foam (CPUF) was prepared from toluene diisocyanate (TDI), tetraethylenepentamine (TEPA), and polycaprolactone diol (PCL; Mw: 1000 g/mole). To avoid harmful reducing agents, ecofriendly reduction of methylene blue (MB) was executed with CPUF as catalyst where ascorbic acid and fresh juice extracts were applied as reducing agents. The FTIR and SEM analysis confirmed the chemical composition and porous morphology of CPUF, respectively. The 100% reduction of MB was recorded in just 15 minutes with ascorbic acid and CPUF, while similar result was obtained in 37 minutes in blank experiment composed of only MB and ascorbic acid. Thus, catalytic role of CPUF in reduction process was proved. Fresh fruit extracts also participated in the reduction process, but rate of reaction was accelerated in the presence of CPUF. The reusability study of the catalyst supported its stability and efficiency. All the successful reduction processes followed 1st-order kinetics with highest apparent rate constant for ascorbic acid. Furthermore, phytotoxicity evaluation proved safe reduction of MB with 60% germination index. Hence, it can be concluded that catalytic role of CPUF has been established with safe and biodegradable reducing agents which can be extended to other redox processes.

Chemical reduction of methylene blue in the presence of nanocatalysts: a critical review

Methylene blue (MB) (3,7-bis (dimethylamino)-phenothiazin-5-ium chloride) is a harmful pollutant and has been long been known for its detrimental effects on human health. Over the recent years, many strategies including reduction, oxidation, biological and photochemical degradation have been reported for converting this harmful dye into commercially useful products. Among the aforementioned strategies, the nanocatalytic reduction of MB into its reduced counterpart, i.e. leucomethylene blue, is considered more preferable because it has been reported to have numerous applications in various industrial fields in the academic literature. The reduction of MB is the kinetically unfavorable reaction. Henceforth, various nanocatalytic systems utilizing different kinds of stabilization mediums have reportedly been used for speeding up this particular reaction. This article attempts to not only describe the fundamental properties of the reduction reaction of MB but also present the classification of the recently reported nanocatalytic assemblies on the basis of the utilized supporting medium. Various techniques used for the characterization of nanocatalytic systems reported for the reduction of MB have been summarized in this review. The thermodynamics, kinetics and mechanistic studies of this nanocatalytic reaction have also been narrated here. This critical review has been written comprehensively to abridge the recent research progress in the assemblage of nanocatalytic systems used for the reduction of MB and to propose some new ideas for further development in this area.