Polyolefin-based interpenetrating polymer network absorbent for crude oil entrapment and recovery in aqueous system

Ultrafast and on-demand oil/water separation with vertically aligned cellulosic smart sponge

Slow oil sorption speed of commercial non-woven polypropylene (PP) sorbent remains a major challenge for efficient clean-up of oil spillage. Adsorption-based polymeric sponge oil removing offers an appealing way to solve this challenge by increasing surface area. However, the tortuous oil sorption path and plastic waste after oil uptake are two long-standing bottlenecks for realizing efficient oil spill removal. Here, we report a vertically aligned-biomass fiber junctioned sorbents (a-BFJS), by confining delignified biomass with carbon nanotube (CNT), polyvinyl alcohol (PVA), and methyltrimethoxysilane (MTMS). The sorbent shows an excellent performance towards xylene sorption capacity with uptake about 50 g g^-1 within 10 s. This is due to the wide and short pathway of their aligned channels, which improves the capillary effect and fast oil transport in the oriented channels. Moreover, the sponge exhibits fast oil sorption-desorption kinetics enabled by simple mechanical squeezing. We further engineered a scalable rapid continuous oil skimming with simple peristaltic pump. The oil recovering using a-BFJS realized high oil selectivity from xylene/water emulsion. Our demonstration of the high-performance aligned channel sorbent and scalable oil removing sponge offers an eco-friendly and promising strategy for efficiently removing oil from oil spills from water.

Electrospinning fabrication of magnetic nanoparticles-embedded polycaprolactone (PCL) sorbent with enhanced sorption capacity and recovery speed for spilled oil removal

The use of oil-soaked sorbents in the recovery and cleaning of oil spills presents challenges due to disposal. Recently, magnetic nanoparticle (MNP) based collection has been gaining interest as a new technique to lower the amount of labor required to treat oil spills. In this study, we devised a new method for the preparation of a magnetic nanoparticle (MNP) embedded polycaprolactone (PCL) sorbent with oleophilic and environmentally friendly features, capable of bring easily collected under a magnetic field. Compared with conventional polypropylene sorbents, the MNP embedded PCL sorbent (MNP/PCL) displayed excellent Arabian light (AL) crude oil sorption capacity (45.7 g g^-1) and decreased the absorption time of the oil-soaked sorbent due to its electrospun structure and efficient distribution of hydrophobic MNPs. Furthermore, the MNP/PCL based sorbent became fully pyrolyzed under certain temperatures and conditions. The MNP embedded PCL-based sorbent demonstrated broad applicability and utility in large scale oil spill projects.

Polyolefin-based electrospun fibrous matrices embedded with magnetic nanoparticles for effective removal of viscous oils

In this work, we present a poly (ethylene-co-1-octene)-based fibrous matrix prepared via electrospinning for highly efficient removal of viscous oils. The sorbent consisting of linear low density polyethylene (LLDPE) allows selective absorption of crude oil spills at the water surface without the need for additional isolation of the matrix prior to the refining process. Moreover, the high specific pore volume of the LLDPE sorbent with uniform fibrous morphology was shown to enable the sorbent reach 81.5 ± 5.9% of its equilibrium absorption capacity within 5 min. Furthermore, magnetic nanoparticles (MNP) are incorporated into each fiber comprising the matrix to facilitate the recovery process via external magnetic field without altering the intrinsic absorption capacity. We envision that these sorbents offer a sustainable route for the quick and thorough clean-up of spilled oil due to their high absorption capacity, fast absorption rate, ease of recovery, and absence of secondary waste.

Superhydrophobic polypropylene sorbent derived from discarded face masks: A highly efficient adsorbent for oil spill sorbent

Globally, an estimated 130 billion face masks are used and disposed of every month. Thus, recycling or upcycling discarded face masks has attracted significant attention due to economic benefits and environmental concerns. To reduce the amount of used face masks going to waste, this study features a superhydrophobic face mask prepared by simple chemical modification with environmentally preferable alkane solvents (n-hexane, n-heptane, and n-decane), that is effective as a sorbent for oil spill cleanup. All alkanes examined increased the surface roughness of the face masks and improved face mask hydrophobicity. The heptane treated face mask (at 90 °C for 1 h), can adsorbed Arabian light crude oil up to 21 times of their weight on the water surface. In addition, chloroform, toluene, gasoline, and diesel were adsorbed 18, 13, 8 and 16 times, respectively. More importantly, heptane has a high recycling efficiency as a treatment solvent and is reusable for at least 10 cycles of mask surface treatment. Consequently, this inexpensive and easily fabricated material is a promising development in waste face mask (WFM) upcycling.

Plastic-containing food waste conversion to biomethane, syngas, and biochar via anaerobic digestion and gasification: Focusing on reactor performance, microbial community analysis, and energy balance assessment

To manage the mixture of food waste and plastic waste, a hybrid biological and thermal system was investigated for converting plastic-containing food waste (PCFW) into renewable energy, focusing on performance evaluation, microbial community analysis, and energy balance assessment. The results showed that anaerobic digestion (AD) of food waste, polyethylene (PE)-containing food waste, polystyrene (PS)-containing food waste, and polypropylene (PP)-containing food waste generated a methane yield of 520.8, 395.6, 504.2, and 479.8 mL CH₄/gVS, respectively. CO₂ gasification of all the plastic-containing digestate produced more syngas than pure digestate gasification. Syngas from PS-digestate reached the maximum yield of 20.78 mol/kg. During the digestate-derived-biochar-amended AD of PCFW, the methane yields in the biochars-amended digesters were 6-30% higher than those of the control digesters. Bioinformatic analysis of microbial communities confirmed the significant difference between control and biochar-amended digesters in terms of bacterial and methanogenic compositions. The enhanced methane yields in biochars-amended digesters could be partially ascribed to the selective enrichment of genus Methanosarcina, leading to an improved equilibrium between hydrogenotrophic and acetoclastic methanogenesis pathways. Moreover, energy balance assessment demonstrated that the hybrid biological and thermal conversion system can be a promising technical option for the treatment of PCFW and recovery of renewable biofuels (i.e., biogas and syngas) and bioresource (i.e., biochar) on an industrial scale.

Highly efficient and recyclable polyolefin-based magnetic sorbent for oils and organic solvents spill cleanup

The oil dispersants have been applied in a broad oil pollution area, but the dispersed oil caused environmental problems during sedimentation. Unlike oil dispersants, flake type polyolefin-based oil absorbent (PA) is not emulsified and shows excellent swelling characteristic for oil removal. However, the sprayed PA flakes cannot be fully collected due to its tiny architectures, the uncollected flakes can cause unintentional secondary pollution. In this study, we develop a kind of flake type polyolefin-based magnetic absorbent (PMA) hybridized with magnetic nanoparticle, to facilitate the collection process. The magnetic nanoparticle is uniformly dispersed in PMA due to the hydrophobic functionalization of iron oxide nanoparticle. This enables the convenient collection of isolated sorbent flakes even when they were placed in the marine system and show a desirable oil recovery performance up to about 37 times for organic solvent. Moreover, oil-soaked PMA flakes can be fully converted into refined oil via a pyrolysis process. After pyrolysis, the thermally undecomposed compounds, which comprise of carbon residue and magnetic nanoparticle, can be also separated by a magnet. The as-prepared flake type PMA possesses good oil recovery performance, fast magnetic response, and efficient oil recycling, thus representing an environmentally promising method for oil spill cleanup.

Preparation of hydrophobic macroinimer-based novel hybrid sorbents for efficient removal of organic liquids from wastewater

Herein, the synthesis of hydrophobic macroinimer-based hybrid sorbents and their use in the removal of organic solvents from wastewater is explored. Polydimethylsiloxane (PDMS), 4,-4'-azobis-4-cyanopentanoyl chloride (ACPC), and methacryloyl chloride were reacted via bulk condensation polymerization to synthesize the macroinimer. The organogel systems were then prepared with macroinimer using different acrylic monomers of methyl acrylate, ethyl acrylate, and butyl acrylate without any additional crosslinker and initiator. The structural properties of the obtained final products were characterized by FT-IR, ¹H-NMR, and TGA. The effect of alkyl chain length and macroinimer moieties in the organogel networks, as well as the swelling capacities of the prepared gels, was evaluated for different organic solvents and oils. The maximum solvent absorbencies of macroinimer-based organogels were determined as 85.3%, 100.9%, 1422.1%, 1660.0%, 3809.3%, and 5032.2% for diesel oil, gasoline, acetone, benzene, tetrahydrofuran (THF), and dichloromethane (DCM), respectively. Furthermore, adsorption-desorption kinetics, selective absorption from oil/water mixtures, temperature effect on the absorption capacity, and reusability tests were investigated. Obtained results showed that the prepared organogels possessed high swelling, efficient absorption capacity, and good oil separation performance in the removal of organic solvents from wastewater. The temperature-dependent absorption study shows no significant change in absorption capacity. Thus, the prepared macroinimer-based organogels in the present study demonstrate potential as prospective sorbents for organic pollutant cleanup from wastewater.

Carboxylated wood-based sponges with underoil superhydrophilicity for deep dehydration of crude oil

Carboxylated wood-based sponges with underoil superhydrophilicity are elegantly developed via a top-down strategy from natural woods and demonstrated outstanding performances in the deep dehydration of water cut crude oil.

Enhanced fluoride uptake by bimetallic hydroxides anchored in cotton cellulose/graphene oxide composites

A novel hybrid nanomaterial was synthesized by embedding the bimetallic Zr and La (hydro)xides onto the cotton cellulose/graphene oxide composites (CC/GO composites), forming the Zr-La-CC/GO nanocomposites. Selective uptake of fluoride onto the Zr-La /GO hybrids in multiple competitive environments were evaluated. Morphological characteristics of Zr-La-CC/GO nanocomposites reflected the well distributions of embedded Zr and La hydroxides in the nanocomposites. Results also indicated that the encapsulated bimetallic hydroxides in Zr-La-CC/GO hybrids exhibited extremely high fluoride adsorption capacity and stability. XPS investigation exhibited the strong ZrF and LaF bonds in spent Zr-La-CC/GO nanocomposites, and the bonds were weakened at higher pH, which was consistent with the adsorption results. In addition, CC/GO composites using as the host could also exert the strong shielding effect to improve the stability of embedded La and Zr species so as only a low La dissolution (<4.2%) and almost no Zr leaching (0.1%) were observed in high HA concentration. What's more, the Zr-La-CC/GO nanocomposites have also shown great potential application for defluoridation in field.

Improved ATR-FTIR detection of hydrocarbons in water with semi-crystalline polyolefin coatings on ATR elements

In situ detection of hydrocarbons in water using ATR-FTIR with LLDPE film.