In-situ synthesis of rGO-ZnO nanocomposite for demonstration of sunlight driven enhanced photocatalytic and self-cleaning of organic dyes and tea stains of cotton fabrics

Recent advances in cotton fabric-based photocatalytic composites for the degradation of organic contaminants

Cotton is one of the oldest and most widely used natural fibers in the world. It enables a wide range of applications due to its excellent moisture absorption, thermal insulation, heat resistance, and durability. Benefiting from current developments in textile technology and materials science, people are constantly seeking more comfortable, more beautiful and more versatile cotton fabrics. As the second skin of body, clothing not only provides the basic needs of wear but also increases the protection of body against different environmental stimuli. In this article, a comprehensive review is proposed regarding research activities of systematically summarise the development and research of cotton fabric-based photocatalytic composites for the degradation of organic contaminants in the area of self-cleaning, degradation of gaseous contaminants, pathogenic bacteria or viruses, and chemical warfare agents. Specifically, we begin with a brief exposition of the background and significance of cotton fabric-based photocatalytic composites. Next, a systematical review on cotton fabric-based photocatalytic composites is provided according to their mechanisms and advanced applications. Finally, a simple summary and analysis concludes the current limitations and future directions in these composites for the degradation of organic contaminants.

Bioinspired graphene-based metal oxide nanocomposites for photocatalytic and electrochemical performances: an updated review

Considering the rapidly increasing population, the development of new resources, skills, and devices that can provide safe potable water and clean energy remains one of the vital research topics for the scientific community. Owing to this, scientific community discovered such material for tackle this issue of environment benign, the new materials with graphene functionalized derivatives show significant advantages for application in multifunctional catalysis and energy storage systems. Herein, we highlight the recent methods reported for the preparation of graphene-based materials by focusing on the following aspects: (i) transformation of graphite/graphite oxide into graphene/graphene oxide via exfoliation and reduction; (ii) bioinspired fabrication or modification of graphene with various metal oxides and its applications in photocatalysis and storage systems. The kinetics of photocatalysis and the effects of different parameters (such as photocatalyst dose and charge-carrier scavengers) for the optimization of the degradation efficiency of organic dyes, phenol compounds, antibiotics, and pharmaceutical drugs are discussed. Further, we present a brief introduction on different graphene-based metal oxides and a systematic survey of the recently published research literature on electrode materials for lithium-ion batteries (LIBs), supercapacitors, and fuel cells. Subsequently, the power density, stability, pseudocapacitance charge/discharge process, capacity and electrochemical reaction mechanisms of intercalation, and conversion- and alloying-type anode materials are summarized in detail. Furthermore, we thoroughly distinguish the intrinsic differences among underpotential deposition, intercalation, and conventional pseudocapacitance of electrode materials. This review offers a meaningful reference for the construction and fabrication of graphene-based metal oxides as effective photocatalysts for photodegradation study and high-performance optimization of anode materials for LIBs, supercapacitors, and fuel cells.

UV-blocking and photocatalytic properties of Ag-coated cotton fabrics with Si binders for photo-degradation of recalcitrant dyes in aqueous solutions under sunlight

Textile wastewater laden with dyes has emerged as a source of water pollution. This possesses a challenge in its effective treatment using a single functional material. In respond to this technological constraint, this work presents multifunctional cotton fabrics (CFs) within a single, streamlined preparation process. This approach utilizes the adherence of Ag NPs (nanoparticles) using Si binder on the surface of CFs, resulting in Ag-coated CFs through a pad dry method. The prepared samples were characterized using scanning electron microscope-energy dispersive X-ray electroscopy (SEM-EDS), thermal gravimetric analysis (TGA), Fourier transformation infrared (FT-IR). It was found that the FT-IR spectra of Ag NPs-coated CFs had peaks appear at 3400, 2900, and 1200 cm-1, implying the stretching vibrations of O-H, C-H, and C-O, respectively. Based on the EDX analysis, the presence of C, O, and Ag related to the coated CFs were detected. After coating the CFs with varying concentrations of Ag NPs (1%, 2% and 3% (w/w)), they were used to remove dyes. Under the same concentration of 10 mg/L and optimized pH 7.5 and 2 h of reaction time, 3% (w/w) Ag-coated CFs exhibited a substantial MB degradation of 98 %, while removing 95% of methyl orange, 85% of rhodamine B, and 96% of Congo red, respectively, following 2 h of Vis exposure. Ag NPs had a strong absorption at 420 nm with 2.51 eV of energy band gap. Under UV irradiation, electrons excited and produced free radicals that promoted dyes photodegradation. The oxidation by-products included p-dihydroxybenzene and succinic acid. Spent Ag-coated CFs attained 98% of regeneration efficiency. The utilization of Ag-coated CFs as a photocatalyst facilitated treated effluents to meet the required discharge standard of lower than 1 mg/L mandated by national legislation. The integration of multifunctional CFs in the treatment system presents a new option for tackling water pollution due to dyes.

Green Synthesis of ZnO and Black TiO2 Materials and Their Application in Photodegradation of Organic Pollutants

ZnO and black TiO2 have been selected as the most efficient materials for organic pollution abatement due to their increased efficiency when compared to other materials. However, the concept of green chemistry makes it desirable to design green synthesis approaches for their production. In this study, black TiO2 was synthesized using an environmentally safe synthetic technique with glycerol as a reductant. ZnO was prepared by using ionic-liquid-based microwave-assisted extracts of Polygonum minus. To investigate the materials' potential to photodegrade organic pollutants, methylene blue (MB) and phenol were chosen as model organic pollutants. Both materials were found to exhibit spherical morphologies and a mesoporous structure and were efficient absorbers of visible light. ZnO exhibited electron-hole pair recombination lower than that of black TiO2. Black TiO2 was discovered to be an anatase phase, whereas ZnO was found to have a hexagonal wurtzite structure. In contrast to black TiO2, which had a surface area of 239.99 m2/g and a particle size of 28 nm, ZnO had a surface area of 353.11 m2/g and a particle size of 32 nm. With a degradation time of 60 min, ZnO was able to eliminate 97.50% of the 40 mg/L MB. Black TiO2, on the other hand, could reduce 90.0% of the same amount of MB in 60 min. When tested for phenol degradation, ZnO and black TiO2 activities were reduced by nearly 15 and 25%, respectively. A detailed examination of both ZnO and black TiO2 materials revealed that ZnO has more potential and versatility for the degradation of organic pollutants under visible light irradiation.

Novel photo and bio-active greyish-black cotton fabric through air- and nitrogen- carbonized zinc-based MOF for developing durable functional textiles

This study explores the potential of using the carbonization of Zn-based metal-organic frameworks (Zn-MOF-5) under N2 and air to modify zinc oxide (ZnO) nanoparticle for the production of various photo and bio-active greyish-black cotton fabrics. The MOF-derived ZnO under N2 demonstrated a significantly higher specific surface area (259 m2g-1) compared to ZnO (12 m2g-1) and MOF-derived ZnO under air (41.6 m2 g-1). The products were characterized using various techniques, including FTIR, XRD, XPS, FE-SEM, TEM, HRTEM, TGA, DLS, and EDS. The tensile strength and dye degradation properties of the treated fabrics were also investigated. The results indicate that the high dye degradation capability of MOF-derived ZnO under N2 is likely due to the lower ZnO band gap energy and improvement in electron-hole pair stability. Additionally, the antibacterial activities of the treated fabrics against Staphylococcus and Pseudomonas aeruginosa were investigated. The cytotoxicity of the fabrics was studied on human fibroblast cell lines using an MTT assay. The study findings demonstrate that the cotton fabric covered with carbonized Zn-MOF under N2 is human-cell compatible while showing high antibacterial activities and stability against washing, highlighting its potential for use in developing functional textiles with enhanced properties.

Suppression of Visible Emission in Low-Temperature Synthesized Cobalt-Doped ZnO Nanoparticles and Their Photosensing Applications

Cobalt (Co)-doped ZnO nanoparticles have been synthesized at 100 °C using a simple chemical technique, without post-deposition annealing. These nanoparticles are of excellent crystallinity and show a significant reduction in defect density upon Co-doping. By varying the Co solution concentration, it is observed that oxygen-vacancy-related defects are suppressed at lower Co-doping, while the defect density shows an increasing trend at higher doping densities. This suggests that mild doping can significantly suppress the defects in ZnO for electronic and optoelectronic applications. The effect of Co-doping is studied using X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), electrical conductivity, and Mott-Schottky plots. Photodetectors fabricated using pure and Co-doped ZnO nanoparticles show a noticeable reduction in the response time upon Co-doping, which again affirms the reduction in the defect density after Co-doping.

Improved cotton fabrics properties using zinc oxide-based nanomaterials: A review

Zinc oxide nanoparticles (ZnO NPs) have gained significant attention in the textile industry for their ability to enhance the physicochemical properties of fabrics. In recent years, there has been a growing focus on the development of ZnO-based nanomaterials and their applications for cotton and other fabrics. This review paper provides an overview of the synthesis and diverse applications of ZnO-based nanomaterials for textile fabrics, including protection against UV irradiation, bacteria, fungi, microwave, electromagnetic radiation, water, and fire. Furthermore, the study offers the potential of these materials in energy harvesting applications, such as wearable pressure sensors, piezoelectric nanogenerators, supercapacitors, and human energy harvesting. Additionally, we discuss the potential of ZnO-based nanomaterials for environmental cleaning, including water, oil, and solid cleaning. The current research in this area has focused on various materials used to prepare ZnO-based nanocomposites, such as metals/nonmetals, semiconductors, metal oxides, carbon materials, polymers, MXene, metal-organic frameworks, and layered double hydroxides. The findings of this review highlight the potential of ZnO-based nanomaterials to improve the performance of textile fabrics in a range of applications, and the importance of continued research in this field to further advance the development and use of ZnO-based nanomaterials in the textile industry.

Dimensionality effects of g-C3N4 from wettability to solar light assisted self-cleaning and electrocatalytic oxygen evolution reaction

Unique interfacial properties of 2D materials make them more functional than their bulk counterparts in a catalytic application. In the present study, bulk and 2D graphitic carbon nitride nanosheet (bulk g-C₃N₄ and 2D-g-C₃N₄ NS) coated cotton fabrics and nickel foam electrode interfaces have been applied for solar light-driven self-cleaning of methyl orange (MO) dye and electrocatalytic oxygen evolution reaction (OER), respectively. Compared to bulk, 2D-g-C₃N₄ coated interfaces show higher surface roughness (1.094 > 0.803) and enhanced hydrophilicity (θ ∼ 32° < 62° for cotton fabric and θ ∼ 25° < 54° for Ni foam substrate) due to oxygen defect induction as confirmed from morphological (HR-TEM and AFM) and interfacial (XPS) characterizations. The self-remediation efficiencies for blank and bulk/2D-g-C₃N₄ coated cotton fabrics are estimated through colorimetric absorbance and average intensity changes. The self-cleaning efficiency for 2D-g-C₃N₄ NS coated cotton fabric is 87%, whereas the blank and bulk-coated fabric show 31% and 52% efficiency. Liquid Chromatography-Mass Spectrometry (LC-MS) analysis determines the reaction intermediates for MO cleaning. 2D-g-C₃N₄ shows lower overpotential (108 mV) and onset potential (1.30 V) vs. RHE for 10 mA cm^-2 OER current density in 0.1 M KOH. Also, the decreased charge transfer resistance (R_CT = 12 Ω) and lower Tafel's slope (24 mV dec^-1) of 2D-g-C₃N₄ make it the most efficient OER catalyst over bulk-g-C₃N₄ and state-of-the-art material RuO₂. The pseudocapacitance behavior of OER governs the kinetics of electrode-electrolyte interaction through the electrical double layer (EDL) mechanism. The 2D electrocatalyst demonstrates long-term stability (retention ∼94%) and efficacy compared to commercial electrocatalysts.

One-Step Fabrication of the ZnO/g-C3N4 Composite for Visible Light-Responsive Photocatalytic Degradation of Bisphenol E in Aqueous Solution

The ZnO/g-C₃N₄ composite was successfully synthesized by a simple one-step calcination of a urea and zinc acetate mixture. The photocatalytic activity of the synthesized composite was evaluated in the degradation of bisphenol E (BPE). The morphology, crystallinity, optical properties, and composition of the synthesized composite were characterized by using various analytical techniques such as scanning electron microscopy (SEM), transmitted electron microscopy (TEM), field emission-electron probe microanalysis (FE-EPMA), nitrogen adsorption and desorption isotherm measurement, Fourier-transform infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD), diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy, electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The degradation rate of BPE with the ZnO/g-C₃N₄ composite was 8 times larger than that obtained with pure g-C₃N₄ at the optimal conditions. The excellent photocatalytic activity was attributed to the synergistic effect between the g-C₃N₄ and ZnO, which enhanced the efficiency of charge separations, reduced the e^-/h⁺ pairs recombination, and increased the visible light absorption ability. The radical scavenger studies indicated that the ^•O₂ ^- and h⁺ species were mainly responsible for the degradation of BPE. The stability test suggested the chemical and photostability of the synthesized composite. Two possible photocatalytical mechanisms have been suggested.

Fabrication of Naturally Derived Chitosan and Ilmenite Sand-Based TiO2/Fe2O3/Fe-N-Doped Graphitic Carbon Composite for Photocatalytic Degradation of Methylene Blue under Sunlight

Fabrication of chitosan and ilmenite sand-based novel photocatalysts through the catalytic graphitization of chitosan is reported. Nanocomposites consisted of TiO2, Fe2O3 and Fe nanoparticles dispersed on a nitrogen-doped graphitic carbon framework. The surface area, pore volume and macropore structure of the carbon matrix is disturbed by the heterogeneously distributed nanoparticles. The extent of graphitization expanded with increasing metal loading as indicated by variation in the ID/IG ratio. The nanomaterial’s surface consists of Fe3+ and Ti4+, and graphitic, pyridinic and pyrrolic nitrogen were found in the carbon matrix. The band gap values of the composites varied in the 2.06–2.26 eV range. The photocatalytic activity of the synthesized nanomaterials was determined, and the highest rate constant for the photodegradation of methylene blue under sunlight was 4.4 × 10−3 min−1, which resulted with 10 mg/L MB and 25 mg of the best-performing catalyst. The rate constant rose with increasing concentrations of persulfate added to the medium. The rate constant greatly diminished with the addition of isopropyl alcohol as it scavenged hydroxyl radicals. The presence of co-pollutants including Pb2+, rhodamine B, PO43− and Cl− curtailed the rate of reaction. The activity reduced with an increasing number of uses of the catalyst.

The Role of the Ferroelectric Polarization in the Enhancement of the Photocatalytic Response of Copper-Doped Graphene Oxide-TiO2 Nanotubes through the Addition of Strontium

To evaluate the potential role of in situ formed Sr-Ti-O species as a ferroelectric component able to enhance the photocatalytic properties of an adjacent TiO₂ semiconductor, Cu-doped/graphene oxide (GO)/TiO₂ nanotubes (TiNTs) composites (with 0.5 wt % Cu and 1.0 wt % GO) have been synthesized while progressive amounts of strontium (up to 1.0 wt %) were incorporated at the surface of the composite through incipient wetness impregnation followed by post-thermal treatment at 400 °C. The different resulting photocatalytic systems were then first deeply characterized by means of N₂ adsorption-desorption measurements, X-ray diffraction (XRD), UV-vis diffuse reflectance (UV-vis DR), Raman and photoluminescence (PL) spectroscopies, and scanning electron microscopy (SEM) (with energy-dispersive X-ray (EDX) spectroscopy and Z-mapping). In a second step, optimization of the kinetic response of the Sr-containing composites was performed for the formic acid photodegradation under UV irradiation. The Sr-containing Cu/GO/TiNT composites were then fully characterized by electrochemical impedance spectroscopy (EIS) for their dielectric properties showing clearly the implication of polarization induced by the Sr addition onto the stabilization of photogenerated charges. Finally, a perfect correlation between the photocatalytic kinetic evaluation and dielectric properties undoubtedly emphasizes the role of ferroelectric polarization as a very valuable approach to enhance the photocatalytic properties in an adjacent semiconductor.

Comparative Studies on Synthesis, Characterization and Photocatalytic Activity of Ag Doped ZnO Nanoparticles

In this work, silver (Ag) doped zinc oxide (ZnO) nanoparticles were synthesized using zinc chloride, zinc nitrate, and zinc acetate precursors with (0 to 10) wt % Ag doping by a simple reflux chemical method. The nanoparticles were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, ultraviolet visible spectroscopy, and photoluminescence spectroscopy. The nanoparticles are studied as a photocatalyst for visible light driven annihilation of methylene blue and rose bengal dyes. The 5 wt % Ag doped ZnO displayed optimum photocatalytic activity toward methylene blue and rose bengal dye degradation at the rate of 13 × 10^-2 min^-1 and 10 × 10^-2 min^-1, respectively. Here we report antifungal activity for the first time using Ag doped ZnO nanoparticles against Bipolaris sorokiniana, displaying 45% efficiency for 7 wt % Ag doped ZnO.

Eco-Friendly Reduction of Graphene Oxide by Aqueous Extracts for Photocatalysis Applications

In the present work, reduced graphene oxide was obtained by green synthesis, using extracts of Larrea tridentata (gobernadora) and Capsicum Chinense (habanero). Graphene oxide was synthesized by the modified Hummers' method and subsequently reduced using natural extracts to obtain a stable and environmentally friendly graphene precursor. Consequently, the gobernadora aqueous extract was found to have a better reducing power than the habanero aqueous extract. This opportunity for green synthesis allows the application of RGO in photocatalysis for the degradation of the methylene blue dye. Degradation efficiencies of 60% and 90% were obtained with these materials.

An Update on Graphene Oxide: Applications and Toxicity

Graphene oxide (GO) has attracted much attention in the past few years because of its interesting and promising electrical, thermal, mechanical, and structural properties. These properties can be altered, as GO can be readily functionalized. Brodie synthesized the GO in 1859 by reacting graphite with KClO3 in the presence of fuming HNO3; the reaction took 3-4 days to complete at 333 K. Since then, various schemes have been developed to reduce the reaction time, increase the yield, and minimize the release of toxic byproducts (NO2 and N2O4). The modified Hummers method has been widely accepted to produce GO in bulk. Due to its versatile characteristics, GO has a wide range of applications in different fields like tissue engineering, photocatalysis, catalysis, and biomedical applications. Its porous structure is considered appropriate for tissue and organ regeneration. Various branches of tissue engineering are being extensively explored, such as bone, neural, dentistry, cartilage, and skin tissue engineering. The band gap of GO can be easily tuned, and therefore it has a wide range of photocatalytic applications as well: the degradation of organic contaminants, hydrogen generation, and CO2 reduction, etc. GO could be a potential nanocarrier in drug delivery systems, gene delivery, biological sensing, and antibacterial nanocomposites due to its large surface area and high density, as it is highly functionalized with oxygen-containing functional groups. GO or its composites are found to be toxic to various biological species and as also discussed in this review. It has been observed that superoxide dismutase (SOD) and reactive oxygen species (ROS) levels gradually increase over a period after GO is introduced in the biological systems. Hence, GO at specific concentrations is toxic for various species like earthworms, Chironomus riparius, Zebrafish, etc.

Efficient Visible-Light Photocatalysis and Antibacterial Activity of TiO2-Fe3C-Fe-Fe3O4/Graphitic Carbon Composites Fabricated by Catalytic Graphitization of Sucrose Using Natural Ilmenite

Dyes in wastewater are a serious problem that needs to be resolved. Adsorption coupled photocatalysis is an innovative technique used to remove dyes from contaminated water. Novel composites of TiO₂-Fe₃C-Fe-Fe₃O₄ dispersed on graphitic carbon were fabricated using natural ilmenite sand as the source of iron and titanium, and sucrose as the carbon source, which were available at no cost. Synthesized composites were characterized by X-ray diffractometry (XRD), Raman spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray fluorescence spectroscopy (XRF), and diffuse reflectance UV-visible spectroscopy (DRS). Arrangement of nanoribbons of graphitic carbon with respect to the nanomaterials was observed in TEM images, revealing the occurrence of catalytic graphitization. Variations in the intensity ratio (I _D/I _G), L _a and L _D, calculated from data obtained from Raman spectroscopy suggested that the level of graphitization increased with an increased loading of the catalysts. SEM images show the immobilization of nanoplate microballs and nanoparticles on the graphitic carbon matrix. The catalyst surface consists of Fe³⁺ and Ti⁴⁺ as the metal species, with V, Mn, and Zr being the main impurities. According to DRS spectra, the synthesized composites absorb light in the visible region efficiently. Fabricated composites effectively adsorb methylene blue via π-π interactions, with the absorption capacities ranging from 21.18 to 45.87 mg/g. They were effective in photodegrading methylene blue under sunlight, where the rate constants varied in the 0.003-0.007 min^-1 range. Photogenerated electrons produced by photocatalysts captured by graphitic carbon produce O₂ ^•- radicals, while holes generate OH^• radicals, which effectively degrade methylene blue molecules. TiO₂-Fe₃C-Fe-Fe₃O₄/graphitic carbon composites inhibited the growth of Escherichia coli (69%) and Staphylococcus aureus (92%) under visible light. Synthesized novel composites using natural materials comprise an ecofriendly, cost-effective solution to remove dyes, and they were effective in inhibiting the growth of Gram-negative and Gram-positive bacteria.

Syntheses of flower and tube-like MoSe2 nanostructures for ultrafast piezocatalytic degradation of organic dyes on cotton fabrics

The synthesis of few-layered transition metal dichalcogenides (TMDCs) with abundant exposure of the active site, viz., is an important key to achieve excellent dye degradation performance. Here, we have reported synthesis and ultrafast dye degradation performance of flowers-like MoSe₂ nanostructure (FMN) with ~230 nm in diameter and its transformation to tube-like MoSe₂ microstructure (~1 μm in length) by tuning the solvothermal reaction time. The piezoelectric devices are developed using the FMNs delivers the highest open-circuit voltage of ~ 2.12 V, which is ~21 times higher than that of the developed device with the tube-like MoSe₂ microstructure. The piezoelectric property of the synthesized samples has been judiciously utilized further for ultrafast degradation of organic dyes within 60-120 s only under the low-frequency (40 kHz) ultrasonication vibration in the dark. The estimated dye degradation efficiencies of the FMNs-based piezocatalyst are found to be ∼86% and 85% for degradation of Rhodamine B (RhB) and methylene blue (MB) dye within the 60 s, respectively. Also, the FMN has exhibited an excellent piezocatalytic dye degradation capability for RhB-MB dye mixture and dye loaded on a cotton fabric with an efficiency of ~98% (60 s) and 84% (120 s), respectively. The piezocatalytic dye degradation mechanism of FMNs has also been explained theoretically.

Photocatalytic, self-cleaning and antibacterial properties of Cu(II) doped TiO2

In the study, sol-gel based TiO₂ nanoparticles (NPs) were doped by Cu(II), and the surface of cotton fabric was coated with Cu-doped TiO₂ NPs to develop self-cleaning and antibacterial properties. Coffee stains were introduced on the modified cotton fabric and under suntest illumination; a decrease in the color of coffee stain was followed over time via K/S value to determine self-cleaning performance. The photocurrent in a photoelectrocatalytic reactor was measured to evaluate the photocatalytic effect of Cu(II) doping. TiO₂ NPs showed self-cleaning and antibacterial effects under UV-illuminated conditions. However, no effects were observed under dark (non-illuminated) conditions. The modified textiles with Cu(II) doped TiO₂ NPs showed antibacterial activity against E. coli under light and dark conditions. Under the 2 h illumination period, fluctuating color changes were observed on the raw cotton fabric, and stains remained on the fabric while 78% and 100% color removals were achieved in the cotton fabrics coated by Cu doped TiO₂ NPs in 1 h and 2 h, respectively.

Synthesis and characterization of ZnO decorated reduced graphene oxide (ZnO-rGO) and evaluation of its photocatalytic activity toward photodegradation of methylene blue

Photocatalytic treatment is one of the techniques used for the treatment of dyes-contaminated wastewater. It is important to develop an effective visible-light-driven catalyst for the treatment of dyes-contaminated wastewater. This study reports the synthesis of ZnO-reduced graphene oxide catalyst for the degradation of methylene blue. Graphene oxide was prepared by Hammer and Offeman process, while ZnO-rGO (1:1) was prepared by the chemical reduction method. The prepared ZnO-rGO composite was characterized by XRD, TEM, SEM, UV-Vis, DRS, N₂ adsorption-desorption, FTIR, and XPS analyses. The photocatalytic activity was evaluated by photodegradation of methylene blue solution under irradiation. It was found that ZnO-rGO is capable of removing the dye from water and achieved the highest dye degradation efficiency of ~99% within 60 min. Furthermore, the ZnO-rGO was recycled in degradation experiments without any loss in its catalytic performance. The reaction kinetics was described in terms of the Langmuir-Hinshelwood mechanism, one of the kinetics mechanisms of surface catalyzed reaction. 36.2 and 13.1 kJ/mol were calculated as the apparent and true activation energy for photodegradation of methylene blue respectively.

Synthesis and characterization of MoxFe1−xO nanocomposites for the ultra-fast degradation of methylene blue via a Fenton-like process: a green approach

A detailed degradation study of methylene blue within 22 minutes by the green synthesis of MoxFe1−xO nanocomposites using Punica granatum peel extract.

CoS2-decorated CdS nanorods for efficient degradation of organic pollutants

The heterostructure between CoS2 and CdS can improve the charge separation efficiency during photocatalysis and promote the generation of more OH and O2− radicals under light irradiation.

Quantifying instant water cleaning efficiency using zinc oxide decorated complex 3D printed porous architectures

Industrialization harms the quality of water; therefore, cleaning and monitoring water sources are essential for sustainable human health and aquatic life. An increase in active surface area and porosity can result in quick and efficient cleaning activity. 3D printing can build porous architecture with controlled porosity and active surface area. Here, catalytically active ZnO nanosheets were grown on the surface of 3D printed architecture (Schwarzites and Weissmuller) with different porosity and surface area. The Weissmuller structure along with ZnO, has shown better catalytic performance due to its higher porosity (~69%) and high active surface area, compared to Schwarzites structure. Synergistic effect of adsorption and photodegradation has resulted in ~95% removal efficiency of mixed dye within 10 min by Weissmuller structure. The dye degradation efficiency was determined using colorimetric measurements with a regular smartphone for real-time quantitative investigation of dye removal efficiency. Most importantly, decorated 3D printed structures exhibit high structural stability without residuals (ZnO nanosheets) in water after performing the recycling experiment. Therefore, the decorated 3D printing structures and colorimetric detection method will offer a user-friendly versatile technique for analysis of removal efficiency of toxic components in different polluted water sources without using high-end sophisticated instruments and complicated procedures.

UV Photochromism in Transition Metal Oxides and Hybrid Materials

Limited levels of UV exposure can be beneficial to the human body. However, the UV radiation present in the atmosphere can be damaging if levels of exposure exceed safe limits which depend on the individual the skin color. Hence, UV photochromic materials that respond to UV light by changing their color are powerful tools to sense radiation safety limits. Photochromic materials comprise either organic materials, inorganic transition metal oxides, or a hybrid combination of both. The photochromic behavior largely relies on charge transfer mechanisms and electronic band structures. These factors can be influenced by the structure and morphology, fabrication, composition, hybridization, and preparation of the photochromic materials, among others. Significant challenges are involved in realizing rapid photochromic change, which is repeatable, reversible with low fatigue, and behaving according to the desired application requirements. These challenges also relate to finding the right synergy between the photochromic materials used, the environment it is being used for, and the objectives that need to be achieved. In this review, the principles and applications of photochromic processes for transition metal oxides and hybrid materials, photocatalytic applications, and the outlook in the context of commercialized sensors in this field are presented.

Biologically reduced graphene oxide as a green and easily available photocatalyst for degradation of organic dyes

The disposal of untreated textile industrial wastewater having unmanageable pollutants is a global issue. Eco-friendly remediation technology is needed for the removal of environmental contaminants. In this study, a simple hydrothermal method is adapted to synthesis reduced graphene oxide (PErGO) using Phyllanthus emblica fruits extract and used as a photocatalyst for the degradation of synthetic toxic dyes. The physicochemical properties of green synthesized PErGO are confirmed using UV-Vis spectroscopy, Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction. The I_D/I_G ratio is found as 1.02 for GO which is improved to 1.15 for PErGO, which confirms the existence of unrepaired defects after the elimination of negatively charged O₂ moieties from the surface of GO. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analysis show well-exploited PErGO morphology. The photocatalytic removal of methylene blue (MB) and methyl orange (MO) dyes is confirmed using UV-vis spectrophotometer. PErGO shows about 92% of MO and 91% of MB degradation within 90 min of sunlight exposure while carried out as a mixed dye degradation. The sustainability of this catalyst is confirmed by testing it for five subsequent degradation cycles and noticed a stable and significant degradation activity. Outcomes from this study suggest that eco-friendly PErGO can be used as an alternate sustainable material to treat a large volume of wastewater from various dye industries.

Biocide mechanism of highly efficient and stable antimicrobial surfaces based on zinc oxide-reduced graphene oxide photocatalytic coatings

Highly efficient photoactive antimicrobial coatings were obtained using zinc oxide-reduced graphene oxide nanocomposites (ZnO-rGO). Their remarkable antibacterial activity and high stability demonstrated their potential use for photoactive biocide surfaces. The ZnO-rGO nanocomposites were prepared by the sol-gel technique to create photocatalytic surfaces by spin-coating. The coatings were deeply characterised and several tests were performed to assess the antibacterial mechanisms. rGO was homogeneously distributed as thin sheets decorated with ZnO nanoparticles. The surface roughness and the hydrophobicity increased with the incorporation of graphene. The ZnO-rGO coatings exhibited high activity against the Gram-positive bacterium Staphylococcus aureus. The 1 wt% rGO coated surfaces showed the highest antibacterial effect in only a few minutes of illumination with up to 5-log reduction in colony forming units, which remained essentially free of bacterial colonization and biofilm formation. We demonstrated that these coatings impaired the bacterial cells due to cell membrane damage and intracellular oxidative stress produced by the photogenerated reactive-oxygen species (ROS). The enhancement of the ZnO photocatalytic performance upon rGO incorporation is due to the increased detected generation of hydroxyl radicals, attributed to the reduction of electron-hole pair recombination. This intimate contact between both components also conveyed stability against zinc leaching and improved the coating adhesion.

Core–shell hybrid structured rGO decorated ZnO nanorods synthesized via a facile chemical route with photosensitive properties

Two-dimensional graphene-based nanocomposites have gained much attention due to their promising applications in electronic and optoelectronic devices.

ZnO nanoparticles as photodegradation agent controlled by morphology and boron doping

ZnO nanoparticles with different morphology and doping possess different atomic planes at their interfaces. This changed their catalytic efficiency during degradation experiments with dyes, significantly dependent also on used dopant concentrations.

Plasmonic ZnO/Au/g-C3N4 nanocomposites as solar light active photocatalysts for degradation of organic contaminants in wastewater

In the present study, novel ZnO/Au/graphitic carbon nitride (g-C₃N₄) nanocomposites were fabricated via a facile and eco-friendly liquid phase pulsed laser process followed by calcination. Notably, the approach did not necessitate the use of any capping agents or surfactants. The as-prepared photocatalysts were evaluated by various electron microscopy and spectroscopy techniques. The obtained results confirmed good dispersion of the Au nanoparticles (NPs) on the surface of spherical ZnO particles deposited on the g-C₃N₄ nanosheets. The ZnO/Au/g-C₃N₄ nanocomposite exhibited substantially enhanced catalytic activity toward the degradation of methylene blue (MB) under simulated solar light irradiation. In particular, the ZnO/Au15/g-C₃N₄ composite containing 15 wt% Au displayed a rate constant, which was approximately 3 and 5 times greater than those of pristine g-C₃N₄ and ZnO, respectively. This improved photocatalytic activity of ZnO/Au15/g-C₃N₄ was attributed to the surface plasmon resonance of Au NPs and the synergistic effects between ZnO and g-C₃N₄. The boundary between ZnO/Au and g-C₃N₄ enabled direct migration of the photogenerated electrons from g-C₃N₄ to ZnO/Au, which hindered the recombination of electron-hole pairs and enhanced the carrier separation efficiency. Additionally, a plausible MB degradation mechanism over the ZnO/Au/g-C₃N₄ photocatalyst is proposed based on the results of the conducted scavenger study.

Mesopourous Fe3O4@SiO2-hydroxyapatite nanocomposite: Green sonochemical synthesis using strawberry fruit extract as a capping agent, characterization and their application in sulfasalazine delivery and cytotoxicity

The present study introduces a simple, biocompatible and effective drug delivery system by using mesoporous nanocomposite-based platform. To achieve this goal, mesopourous Fe₃O₄@SiO₂-hydroxyapatite nanocomposite (mFSH) was synthesized by sonochemical process in presence of strawberry fruit extract as capping agent (mFSH-SW). The impact of various factors such as sonication time (5, 15, 30 and 45 min), capping agent (cherry (CH), strawberry (SW), malus domestica (MD), andean blackberry (AB)), pH (10, 11 and 12) and sonication power (30, 60 and 80 W) were investigated to reach optimum condition. To reach high efficiency of drug loading, mFSH was grafted with 3-aminopropyl triethoxysilane (APTES). Uniform, regular and spherical morphology of nanocomposite were specified by field emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), vibrating sample magnetometer (VSM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive x-ray spectroscopy (EDX), dynamic light scattering (DLS), nitrogen adsorption/desorption isotherm and Fourier-transform infrared spectroscopy (FT-IR) techniques. The mean pore size, surface area, and pore volume of mFSH-SW were 63.2 m² g^-1, 14.1 nm and 0.24 cm³ g^-1, respectively. Sulfasalazine (SLN) loading and release were carried out by various products. The functionalized mFSH-SW showed high adsorption capacity (approximately 59.1 %) for SLN that possesses amino functional groups. The results showed that 100 % of SLN-loaded nanocomposite could be released after 36 h at intestinal conditions (pH = 6.8). In addition, in-vitro and in-vivo toxicity investigations of product were performed with apoptosis/necrosis, XTT and pathology assay, respectively. All in all, unique properties of the nanocomposite including low toxicity, high drug loading, slow release and biodegradable showed that it can be used in biomedical sciences.

Acrylic acid functionalized graphene oxide: High-efficient removal of cationic dyes from wastewater and exploration on adsorption mechanism

A novel p(AA)-g-GO material was prepared by grafting polymerization of acrylic acid (AA) onto graphene oxide (GO) skeleton, presenting efficient removal of dyes from wastewater, because the layer spacing of GO is expanded and successfully introduced numerous polar carboxyl groups. The study revealed a rapid adsorption kinetic process and the adsorption capacity for methylene blue (MB) increases with pH, contact time, initial dye concentration and temperature. The maximum adsorption capacity is about 1448.2 mg/g at 25 °C for MB according to the Langmuir isotherm. More importantly, the adsorbent maintains excellent adsorption capacity after five cycles of adsorption-desorption and has remarkable selective separability for methylene blue/methyl orange mixed solution at pH = 10. Furthermore, the equilibrium adsorption capacities for other cationic dyes as malachite green (MG), basic fuchsin (BF) and rhodamine B (RhB) reached 582.1, 571.7 and 437.1 mg/g, respectively. Additionally, the mechanism analysis indicated that electrostatic interactions, π-π conjugation and hydrogen bonding are the predominant forces for adsorbing cationic dyes. Therefore, p(AA)-g-GO is an outstanding adsorbent and has a potential application prospect in the treatment of dye wastewater.

Fabrication and investigation on Ag nanowires/TiO2 nanosheets/graphene hybrid nanocomposite and its water treatment performance

In this paper, a novel Ag nanowires/TiO₂ nanosheets/graphene nanocomposite was fabricated via a facile method of hydrothermal and calcination, and then the water treatment performance of it was evaluated for methylene blue (MB) and Escherichia coli removal. The as-prepared Ag nanowires/TiO₂ nanosheets/graphene nanocomposite was characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), UV-visible diffuse reflection spectroscopy (DRS), molecular dynamics simulation, and gas chromatography-mass spectrometry (GC-MS). All data revealed that the Ag/TiO₂/graphene nanocomposite showed a rich cell structure. The photocatalytic activity of Ag/TiO₂/graphene nanocomposite is higher than those of pristine TiO₂ nanosheets and TiO₂/graphene nanocomposite. Under optimized conditions, the degradation efficiency was 100% and 71% for MB (30 mg/L) and with 10 mg Ag/TiO₂/graphene nanocomposite under UV and visible light irradiation for 2 h, respectively. Ag/TiO₂/graphene also showed excellent bacteria-killing activity. Meanwhile, the Ag/TiO₂/graphene nanocomposite exhibited microstructure stability and cyclic stability. The water treatment performance was enhanced mainly attributed to the excellent adsorption performance of graphene and the high efficiency in separation of electron-hole pairs induced by the remarkable synergistic effects of TiO₂, Ag, and graphene. On the basis of the experimental results, the photocatalytic mechanism and MB degradation mechanism were proposed. It is hoped that our work could avert the misleading message to the readership, hence offering a valuable source of reference on fabricating composite photocatalyst with stable microstructure and excellent performance for their application in the environment clean-up. Graphical abstract.

The Spinning Voltage Influence on the Growth of ZnO-rGO Nanorods for Photocatalytic Degradation of Methyl Orange Dye

In this work, well-designed zinc oxide-reduced graphene oxide (ZnO-rGO) nanorods (NRs) were synthesized by a hydrothermal method using electrospun ZnO-rGO seed layers. The ZnO-rGO seed layers were fabricated on fluorine-doped tin oxide (FTO) glass substrates through calcined of electrospun nanofibers at 400 °C in the air for 1 h. The nanofibers were prepared by electrospinning different spinning voltages and a spinning solution containing zinc acetate, polyvinyl pyrrolidone, and 0.2 wt% rGO. From a detailed characterization using various analytical techniques, for instance, X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), Raman spectroscopy, photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS), the dependence of the structure, morphology, and optical properties of the ZnO-rGO NRs was demonstrated. The photocatalytic activities of ZnO-rGO nanorods were evaluated through the degradation of dye methyl orange (MO). The results show that the change of spinning voltages and the coupling of rGO with ZnO improved photodecomposition efficiency as compared to pure ZnO. The highest photocatalytic efficiency was obtained for the ZnO-rGO NRs prepared with a spinning voltage of 40 kV.

Green synthesis of zinc oxide particles with apple-derived compounds and their application as catalysts in the transesterification of methyl benzoates

ZnO nanoparticles (ZnONPs) were successfully synthesized using bravo-de-esmolfe apple extract in aqueous medium at room temperature. ZnO microparticles, prepared with a pure apple phytochemical, quercetin (ZnOq), or without phytochemicals (ZnO) were studied for comparative purposes. The re-use of apple waste for highly efficient catalyst production, based on green synthetic routes, can be added to the concept of a circular economy. The synthesized ZnO particles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2 adsorption/desorption Brunauer-Emmett-Teller (BET) theory. The XRD patterns indicated the formation of a hexagonal wurtzite phase with high purity and SEM and TEM analyses revealed the morphology of the particles. The apple extract produced spherical ZnONPs composed of round lamina-like structures, similar to the micro sized lamina-like shape of ZnOq and dissimilar to the flower-like shape of ZnO. The green synthesized ZnO nanoparticles (ZnONPs) led to a high product yield of ca. 96% within 24 h of reaction time in the transesterification reaction of different carboxylic esters.

Zinc Oxide for Functional Textile Coatings: Recent Advances

The use of ZnO for the functionalization of textile substrates is growing rapidly, since it can provide unique multifunctional properties, such as photocatalytic self-cleaning, antimicrobial activity, UV protection, flame retardancy, thermal insulation and moisture management, hydrophobicity, and electrical conductivity. This paper aims to review the recent progress in the fabrication of ZnO-functionalized textiles, with an emphasis on understanding the specificity and mechanisms of ZnO action that impart individual properties to the textile fibers. The most common synthesis and application processes of ZnO to textile substrates are summarized. The influence of ZnO concentration, particle size and shape on ZnO functionality is presented. The importance of doping and coupling procedures to enhance ZnO performance is highlighted. The need to use binding and seeding agents to increase the durability of ZnO coatings is expressed. In addition to functional properties, the cytotoxicity of ZnO coatings is also discussed. Future directions in the use of ZnO for textile functionalization are identified as well.

In situ synthesis of ZnO–GO/CGH composites for visible light photocatalytic degradation of methylene blue

A novel ZnO–GO/CGH composite was prepared using an in situ synthesis process for photodegradation of methylene blue under visible light illumination. The chitin–graphene composite hydrogel (CGH) was used to provide uniform binding of the nano ZnO–GO composite to the hydrogel surface and prevent their agglomeration. GO provides multi-dimensional protons and electron transport channels for ZnO with a flower-like structure, which possessed improved photo-catalytic activity. SEM analysis indicates that the hydrogel has good adsorption properties with rougher surfaces and porous microstructure, which enables it to adsorb the dyes effectively. Under synergetic enhancement of adsorption and photo-catalysis, catalytic activity and nano ZnO–GO/CGH recycling improved greatly. Synthesized nano ZnO–GO/CGH showed high dye removal efficiency of 99%, about 2.2 times that of the pure chitin gel under the same condition. This suggests the potential application of the new photocatalytic composites to remove organic dyes from wastewater.

A novel ZnO–GO/CGH composite was prepared using an in situ synthesis process for photodegradation of methylene blue under visible light illumination.

Spatially separated cocatalysts for efficient charge separation: a hollow Pt/CdS/N–ZnO/CoOx graphene microtubule with high stability for photocatalytic reactions and sustainable recycling

The spatially separated Pt/CdS/N–ZnO/CoO_x graphene microtubule (PCNZCo-GM) with double cocatalysts is prepared by a capillary action assisted hydrothermal method for enhancing charge separation efficiency and photocatalytic oxidation ability.

Multi-shelled ZnO decorated with nitrogen and phosphorus co-doped carbon quantum dots: synthesis and enhanced photodegradation activity of methylene blue in aqueous solutions

The presence of organic dyes in wastewater has posed a huge threat to aquatic life and human health.