Preparation of a bioflocculant by using acetonitrile as sole nitrogen source and its application in heavy metals removal

Removal of Pb (II) and Zn (II) in the mineral beneficiation wastewater by using cross-linked carboxymethyl starch-g-methacrylic acid as an effective flocculant

The cross-linked carboxymethyl starch-g-methacrylic acid (CCMS-g-MAA) was prepared by using grafting and micro-cross-linking in the one-pot preparation process. CCMS-g-MAA presented high removal capacity of Pb (II) of 57.13 mg/g at pH = 4 and high removal capacity of Zn (II) of 51.41 mg/g at pH = 5 by using a sample dosage of 0.68 g/L. Characterization results of FTIR, TG, and XRD illustrate that methacrylic acid and sodium tri-metaphosphate were successfully introduced into the structure of carboxymethyl starch. SEM characterization presented that the sample particles were amorphous aggregates with surface voids, which was favorable for the adsorption of heavy metal ions from wastewater. Adsorption isotherm results indicated that Freundlich equation could be better used to describe the adsorption process of metal ions on CCMS-g-MAA. The adsorption kinetic results indicated that the pseudo-second-order model is more suitable to describe this removal process. XPS results indicated that metal ions interacted with functional groups on the surface of flocculant, especially carboxyl groups. The removal process may be purposed that metal ions were adsorbed by porous material, and then combined with surface functional groups of the flocculant via electrostatic interaction, chelation or ion exchange. Subsequently, metal ions were separated from the wastewater with flocs precipitated in the bottom of solution via bridging and patching. The obtained results illustrated that CCMS-g-MAA was an effective material for the treatment of wastewater containing polymetallic ions besides mineral beneficiation wastewater supported by its excellent regeneration.

Performance and mechanism of different pretreatment methods for inoculated sludge in biohydrogen production

A comparison was conducted between pre-culture bacteria (PCB) and heat treatment anaerobic granular sludge (HTAGS) for hydrogen production, and it was found that hydrogen molar yield (HMY) of PCB was 21-35% higher than that of HTAGS. The addition of biochar increased hydrogen production in both cultivation methods by acting as an electron shuttle to enhance extracellular electron transfers of Clostridium and Enterobacter. On the other hand, Fe₃O₄ did not promote hydrogen production in PCB experiments but had a positive effect on HTAGS experiments. This was due to the fact that PCB was mainly composed of Clostridium butyricum, which could not reduce extracellular iron oxide, resulting in a lack of respiratory driving force. In contrast, HTAGS retained a significant amount of Enterobacter, which possess the ability of extracellular anaerobic respiration. Different pretreatment methods of inoculum resulted in significant changes in the sludge community, thus exerting a noticeable impact on biohydrogen production.

Hyperproduction of extracellular polymeric substance in Pseudomonas fluorescens for efficient chromium (VI) absorption

A novel extracellular polymeric substance (EPS) with flocculating activity produced by Pseudomonas fluorescein isolated from soil was studied in this paper. Firstly, atmospheric and room temperature plasma (ARTP) was applied to get a mutant of P. fluorescein with higher EPS production. A mutant T4-2 exhibited a 106.48% increase in flocculating activity compared to the original strain. The maximum EPS yield from T4-2 was enhanced up to 6.42 g/L, nearly 10 times higher than the original strain on a 3.6-L bioreactor with optimized fermentation conditions. Moreover, the flocculating activity of the mutant reached 3023.4 U/mL, 10.96-fold higher than that of T4. Further identification showed that EPS from mutant T4-2 was mainly composed of polysaccharide (76.67%) and protein (15.8%) with a molecular weight of 1.17 × 105 Da. The EPS showed excellent adsorption capacities of 80.13 mg/g for chromium (VI), which was much higher than many reported adsorbents such as chitosan and cellulose. The adsorption results were described by Langmuir isotherm and pseudo-second-order kinetic model. The thermodynamic parameters (ΔG0, ΔH0 and ΔS0) revealed that the adsorption process was spontaneous and exothermic. Adsorption mechanisms were speculated to be electrostatic interaction, reduction, and chelation.

A bioflocculant from Corynebacterium glutamicum and its application in acid mine wastewater treatment

Although many microorganisms have been found to produce bioflocculants, and bioflocculants have been considered as attractive alternatives to chemical flocculants in wastewater treatment, there are few reports on bioflocculants from the safe strain C. glutamicum, and the application of bioflocculants in acid wastewater treatment is also rare attributed to the high content of metal ions and high acidity of the water. In this study, a novel bioflocculant produced by Corynebacterium glutamicum Cg1-P30 was investigated. An optimal production of this bioflocculant with a yield of 0.52 g/L was achieved by Box-Behnken design, using 12.20 g/L glucose, 4.00 g/L corn steep liquor and 3.60 g/L urea as carbon and nitrogen source. The structural characterization revealed that the bioflocculant was mainly composed of 37.50% neutral sugar, 10.03% uronic acid, 6.32% aminosugar and 16.51% protein. Carboxyl, amine and hydroxyl groups were the functional groups in flocculation. The biofocculant was thermally stable and dependent on metal ions and acidic pH, showing a good flocculating activity of 91.92% at the dosage of 25 mg/L by aid of 1.0 mM Fe³⁺ at pH 2.0. Due to these unique properties, the bioflocculant could efficiently remove metal ions such as Fe, Al, Zn, and Pb from the real acid mine wastewater sample without pH adjustment, and meanwhile made the acid mine wastewater solution become clear with an increased neutral pH. These findings suggested the great potential application of the non-toxic bioflocculant from C. glutamicum Cg1-P30 in acid mine wastewater treatment.

Efficacy of simultaneous hexavalent chromium biosorption and nitrogen removal by the aerobic denitrifying bacterium Pseudomonas stutzeri YC-34 from chromium-rich wastewater

The impact of high concentrations of heavy metals and the loss of functional microorganisms usually affect the nitrogen removal process in wastewater treatment systems. In the study, a unique auto-aggregating aerobic denitrifier (Pseudomonas stutzeri strain YC-34) was isolated with potential applications for Cr(VI) biosorption and reduction. The nitrogen removal efficiency and denitrification pathway of the strain were determined by measuring the concentration changes of inorganic nitrogen during the culture of the strain and amplifying key denitrification functional genes. The changes in auto-aggregation index, hydrophobicity index, and extracellular polymeric substances (EPS) characteristic index were used to evaluate the auto-aggregation capacity of the strain. Further studies on the biosorption ability and mechanism of cadmium in the process of denitrification were carried out. The changes in tolerance and adsorption index of cadmium were measured and the micro-characteristic changes on the cell surface were analyzed. The strain exhibited excellent denitrification ability, achieving 90.58% nitrogen removal efficiency with 54 mg/L nitrate-nitrogen as the initial nitrogen source and no accumulation of ammonia and nitrite-nitrogen. Thirty percentage of the initial nitrate-nitrogen was converted to N₂, and only a small amount of N₂O was produced. The successful amplification of the denitrification functional genes, norS, norB, norR, and nosZ, further suggested a complete denitrification pathway from nitrate to nitrogen. Furthermore, the strain showed efficient aggregation capacity, with the auto-aggregation and hydrophobicity indices reaching 78.4 and 75.5%, respectively. A large amount of protein-containing EPS was produced. In addition, the strain effectively removed 48.75, 46.67, 44.53, and 39.84% of Cr(VI) with the initial concentrations of 3, 5, 7, and 10 mg/L, respectively, from the nitrogen-containing synthetic wastewater. It also could reduce Cr(VI) to the less toxic Cr(III). FTIR measurements and characteristic peak deconvolution analysis demonstrated that the strain had a robust hydrogen-bonded structure with strong intermolecular forces under the stress of high Cr(VI) concentrations. The current results confirm that the novel denitrifier can simultaneously remove nitrogen and chromium and has potential applications in advanced wastewater treatment for the removal of multiple pollutants from sewage.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Optimal production of bioflocculant from Pseudomonas sp. GO2 and its removal characteristics of heavy metals

Bioflocculant may be a promising bioactivator for heavy metal removal duo to its eco-friendly properties and remarkable ability to adsorb heavy metals. In this study, bioflocculant production from a bacterium, Pseudomonas sp. GO2, was optimized and its removal efficiency for two heavy metal ions was evaluated. Results demonstrated that the maximal flocculation efficiency was achieved with concentration levels of 5 g/L glucose, 3 g/L casein, and 5 g/L NaCl, with an initial pH of 9.0, and a fermentation time of 48 h. Bioflocculant produced by GO2 had a stronger removal efficiency for Cd²⁺ than that of Pb²⁺, with highest removal efficiencies of 85.38% and 80.87%, respectively. The adsorption process was mainly dependent on the monolayer and chemisorption based on the adsorption isotherm and kinetic models. This study demonstrated that bioflocculant produced by the GO2 strain has the potential to be used in heavy metal treatment from industrial wastewater.

Preparation of a bacterial flocculant by using caprolactam as a sole substrate and its application in amoxicillin removal

High cost is one of the limiting factors in the industrial production of bioflocculant. Simultaneous preparation of bioflocculant from the contaminants in wastewater was considered as a potential approach to reduce the production cost. In this study, caprolactam was verified as sole feedstock for the growth of strain Alcaligenes faecalis subsp. phenolicus ZY-16 in batch experiments. Chemical analysis showed that the as-prepared MBF-16 consisted of heteropolysaccharides (88.3%) and peptides (9.4%). XPS result indicated the plentiful acylamino, hydroxyl and amino groups in MBF-16, which have an indispensable role in amoxicillin flocculation. The flocculation of amoxicillin can be well stimulated by Freundlich isotherm equation, and the Kf was up to 178.6524 for amoxicillin. The kinetic fitting results proved that the flocculation of amoxicillin by MBF-16 was chemisorbed. This contribution may develop a novel technology for the preparation of bacterial flocculants that can consume toxic substrates (caprolactam) and have potential applications in amoxicillin removal.

Adsorption characteristics of methylene blue by a dye-degrading and extracellular polymeric substance -producing strain

Biosorption of dye by microbes and the extracellular polymeric substances (EPS) were of great environmental significance, especially for the dye-degrading and EPS-producing strain. Previous studies were mainly focused on the adsorption capacities and regeneration properties of pure culture, few were on the biosorption of dyes by the dye-degraders and the contributions of EPS on adsorption. In this study, a dye-degrading and EPS-producing strain i.e., Klebsiella oxytoca was used to evaluate its removal capacity to methylene blue. The maximum adsorption capacity (q_e) by the strain was calculated as 145 mg g^-1, which is superior to many reported bio-adsorbents and some synthetic materials. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy results suggested that CO, -NH₂ and P-OH groups were involved in the adsorption. High pressure steam sterilization (HPSS) increased the hydrophilicity of cell wall but did not significantly change the cell structure. Compared with the dead resting cell (DRC), the relative higher q_e obtained by live resting cell (LRC) possibly due to the loss of some cell structure during the HPSS process. Adsorption experiments by EPS-free LRC, confocal laser microscope and three-dimensional excitation-emission matrix fluorescence spectroscopy results confirmed that the EPS played a role in the adsorption of MB dye. The adsorption characteristics of the dye-degrader and the contributions of EPS on adsorption were investigated in detail in this study. The results were benefit for better understanding of the interaction mechanisms between the dye molecules and cells that before the biodegradation process, which were of great significance for the practical usage of residual sludge on removal of dyes.

Recent advances and perspectives in efforts to reduce the production and application cost of microbial flocculants

Microbial flocculants are macromolecular substances produced by microorganisms. Due to its non-toxic, harmless, and biodegradable advantages, microbial flocculants have been widely used in various industrial fields, such as wastewater treatment, microalgae harvest, activated sludge dewatering, heavy metal ion adsorption, and nanoparticle synthesis, especially in the post-treatment process of fermentation with high safety requirement. However, compared with the traditional inorganic flocculants and organic polymeric flocculants, the high production cost is the main bottleneck that restricts the large-scale production and application of microbial flocculants. To reduce the production cost of microbial flocculant, a series of efforts have been carried out and some exciting research progresses have been achieved. This paper summarized the research advances in the last decade, including the screening of high-yield strains and the construction of genetically engineered strains, search of cheap alternative medium, the extraction and preservation methods, microbial flocculants production as an incidental product of other biological processes, combined use of traditional flocculant and microbial flocculant, and the production of microbial flocculant promoted by inducer. Moreover, this paper prospects the future research directions to further reduce the production cost of microbial flocculants, thereby promoting the industrial production and large-scale application of microbial flocculants.

Wastewater treatment using plant-derived bioflocculants: green chemistry approach for safe environment

The rapid expansion of global trade and human activities has resulted in a massive increase in wastewater pollution into the atmosphere. Suspended solids, organic and inorganic particles, dissolved solids, heavy metals, dyes, and other impurities contained in wastewater from various sources are toxic to the atmosphere and pose serious health risks to humans and animals. Coagulation-flocculation technology is commonly used in wastewater treatment to remove cell debris, colloids, and contaminants in a comfortable and effective manner. Flocculants, both organic and inorganic, have long been used in wastewater treatment. However, because of their low performance, non-biodegradability, and associated health risks, their use has been limited. The use of eco-friendly bioflocculants in wastewater treatment has become essential due to the health implications of chemical flocculants. Because of their availability, biodegradability, and protection, plant-derived coagulants/flocculants and plant-based grafted bioflocculants have recently made significant progress in wastewater treatment. This study will undoubtedly provide a clearer understanding of the current state, challenges, and solutions for bioflocculation in wastewater remediation using green materials for the sake of a cleaner climate.

Energy-saving preparation of a bioflocculant under high-salt condition by using strain Bacillus sp. and the interaction mechanism towards heavy metals

A highly efficient bioflocculant, i.e., Na-Bsp was successfully prepared by using a tolerant strain-Bacillus sp. under high-salt condition without sterilization. Salt-containing medium was not infected by other strains throughout the whole incubation period in 168 h. The as-prepared Na-Bsp was found to be cation-dependent, exhibiting high flocculant efficiency (FE) i.e., 97.69 ± 0.61%, towards kaolin particles by aid of Fe³⁺. High FE values were well maintained under a wide pH range and/or boiled water treatment, likely because of the main constituent of polysaccharide. The presence of hydroxyl, carboxyl, and amine groups on the bioflocculant surface were possibly responsible for strong interactions with heavy metals. The adsorption capacities of Pb²⁺, Cu²⁺ and Cr⁶⁺ were 1000.0, 434.8 and 384.6 mg g^-1, respectively. The changing of structure and configuration of bioflocculant during the metal adsorption were explored by the scanning electron microscope with electron energy loss spectroscopy and three-dimensional excitation-emission fluorescence spectrometry. This study provided a novel production method, whereby the conventional sterilization could be avoided, which is of great environmental significance for steam-saving. Furthermore, the as-prepared Na-Bsp exhibited high adsorption capacities toward heavy metals, which sheds lights on its potential usage as an alternative adsorbent.

Efficient Biodegradation of Azo Dyes Catalyzed by the Anthraquinone-2-sulfonate and Reduced Graphene Oxide Nanocomposite

An anthraquinone-2-sulfonate and reduced graphene oxide nanocomposite (AQS@rGO) was prepared and the improvement on the biotic reduction of a pollutant, i.e., azo dye, was demonstrated. Electron paramagnetic resonance signal of the semi-quinone radical in the well-dispersed solid AQS@rGO solution was detected. Although the as-prepared AQS@rGO has a negligible adsorption capacity toward methyl orange (MO) dye, the decolorization efficiencies in both flask experiments and sequencing operation reactors in the presence of AQS@rGO were increased by more than 1.5 times as compared to that with graphene oxide, and an efficient and continuable catalytic effect on the decolorization of azo dyes in seven operation periods was maintained. The catalytic effect on reduction was caused by the formation of a space-charge layer, which facilitates the efficient e- transfer from the conductive rGO sheets to the C=O of the AQS molecule. The results suggested that the AQS@rGO may act as an efficient insoluble redox mediator, which is important for the pollution control by accelerating the extracellular electron transfer.

Capability of Bacillus Subtilis to remove Pb2+ via producing lipopeptides

Lead contamination is widely found in soil and waters, which makes great threat to animal and human health. Environmentally friendly, efficient, and economical methods for the removal of Pb²⁺ pose significant challenges for environmental protection. Bacillus subtilis lipopeptide was firstly used to remove Pb²⁺ from water. In mechanisms, the lipopeptides formed complexes and chelated with Pb²⁺ via OH, CO, OCO, and NH. In kinetics, the Pb²⁺ removal process closely followed a pseudo-first-order model, and the equilibrium Pb²⁺ adsorption capacity ranged from 112.6 to 113.7 mg/g within a temperature range of 293.13-313.13 K. The Pb²⁺ removal process could be well described by a Langmuir isotherm. The maximum Pb²⁺ removal capability of lipopeptides was 164.4 mg/g in manually metal contaminated water and 130.4 mg/g in actual wastewater. Furthermore, the lipopeptides can not only decrease the amount of lead in oats grown, but also promote oat growth under Pb²⁺ stress. The results showed that lipopeptides can be used as a highly efficient adsorbent to remove Pb²⁺ from water, which means the great potential of lipopeptides in practical environments.

Production of bioflocculant using feather waste as nitrogen source and its use in recycling of straw ash-washing wastewater with low-density and high pH property

Straw ash-washing wastewater is generated in the process of straw combustion power generation and potash fertilizer production. The suspended solid particles in straw ash-washing wastewater are hard to be settled down due to its low-density and high pH properties which inhibit the application of traditional chemical flocculants. Bioflocculant has good advantages in flocculating activity, biodegradability and adaptability of wastewater pH fluctuation. However, high production cost limited the large-scale applications of bioflocculant in wastewater treatment. In this study, the feasibility of using feather waste as cheap alternative nitrogen source of alkaliphilic Bacillus agaradhaerens C9 to produce bioflocculant was investigated. The results showed that strain C9 could simultaneously produce keratinase and bioflocculant, and thereby producing bioflocculant (named as BFF) using feather waste as cheap nitrogen source. The optimal fermentation conditions for enzymatic hydrolysis of feather waste and BFF production was 40 g/L feather wastes, 16 g/L glucose, 37 °C and pH 9.5, and the highest yield of 2.5 g/L was obtained. Moreover, BFF was used to flocculate straw ash-washing wastewater which exhibits low-density and high pH properties, and the highest flocculating rate of 93.1% was achieved when 6.0 mg/L BFF was added. This study reported for the first time that feather waste was used as inexpensive alternative nitrogen source for producing bioflocculant which could treat straw ash-washing wastewater, thereby promoting the resourceful utilization of feather waste and the reuse of straw ash-washing wastewater.

Bioflocculant production using palm oil mill and sago mill effluent as a fermentation feedstock: Characterization and mechanism of flocculation

This study was conducted to examine the production of bioflocculants using agricultural wastewater as a fermentation feedstock under different temperatures and incubation times. The mechanism of flocculation was studied to gain a detailed understanding of the flocculation activity. The highest bioflocculant yield (2.03 g/L) at a temperature of 40 °C was produced in a palm oil mill effluent medium (BioF-POME). Bioflocculant produced from a fermented SME medium (BioF-SME) showed the highest activity. The flocculation tests for colour and turbidity removal from lake water indicated that BioF-SME and BioF-POME performed comparably to commercial alum. Analyses of the bioflocculants using liquid chromatography-mass spectrometry (LC-MS) found that the bioflocculants contained xylose and glucose. The mechanism study showed that flocculation occurred through charge neutralization and interparticle bridging between the bioflocculant polymer and the particles in the lake water. Thus, agricultural wastewater can be used as a fermentation feedstock for high-quality bioflocculants.

Simultaneous nitriles degradation and bioflocculant production by immobilized K. oxytoca strain in a continuous flow reactor

High cost is one of the limiting factors in the industrial production of bioflocculant. Simultaneous preparation of bioflocculant from the contaminants in wastewater was considered as a potential approach to reduce the production cost. In this study, butyronitrile and succinonitrile were verified as sole nitrogen sources for the growth of strain K. oxytoca GS-4-08 in batch experiments. Moreover, more than 90 % of the mixed nitriles could be degraded in a continuous flow reactor, and the bioflocculant could be prepared simultaneously in the effluent. All the as-prepared bioflocculants exhibited high flocculation efficiencies of over 90 % toward Kaolin solution. FTIR and XPS results further unveiled that, the bioflocculant samples with abundance of carboxyl, amine and hydroxyl groups may play an important role on adsorption of Pd²⁺. The adsorption process could be well simulated by Freundlich model, and the K_f values were as high as 452.8 mg^1-1/n l^1/n g^-1. The results obtained in this study not only confirm the technical feasibility for preparation of bioflocculant from various single nitrile and/or mixed nitriles, but also promise its economic feasibility.

Comparison and modeling of leachate transportation dominated by the field permeability with an anisotropic characteristic based on a large-scale field trial study

Permeability significantly affects leachate transportation. Yet, there often exists a gap for its measurements between laboratory and the field. To predict the fate and transport of heavy metals from IBA leaching, a large-scale field trial study was performed using a big column (d × h = 3 m × 5.5 m) packed with 1-m thickness of IBA (approx. 10.6 tons) overlaid by 4-m sand layer. The determined field permeability (k_F) was compared with that achieved from the laboratory, demonstrating a large disparity as much as 4 orders of magnitude likely due to IBA self-compaction. Indeed, back calculation using Blake-Kozeny's equation unveiled that, the "effective" diameters were significantly reduced by 21-46%. k_F also demonstrated an anisotropic characteristic associated with fingered flows, trapped bubbles and heterogeneous consolidation/cementation efficiencies. To quantify the effects by k_F, we ran a mechanistic model to simulate the transport of 11 heavy metals under advection (d_h/d_x  = 0.05 m/m), indicating dramatically prolonged breakthrough time from days to centuries. Interestingly, breakthrough time was comparable among various metal ions (0-16.6% of RSD), suggesting their synchronous movements. Metal flux under k_F was predicted in the end to address its toxicity potential, demonstrating limited environmental impacts in presence of the USEPA criterion.

Bioconversion of kitchen wastes into bioflocculant and its pilot-scale application in treating iron mineral processing wastewater

In this study, the feasibility of converting kitchen waste into bioflocculant using Bacillus agaradhaerens C9 was analyzed. The result showed that strain C9 could secrete various degrading enzymes, including amylase, protease, lipase, cellulase, xylanase and pectinase, promoting the hydrolysis of kitchen waste. Strong alkaline fermentation condition was able to induce the bioflocculant production, and inhibit the growth of contaminated bacteria, which avoids the sterilization process of kitchen waste. The optimum fermentation condition for enzymatic hydrolysis and bioflocculant production was 40 g/L kitchen waste, 37 °C, pH 9.5, and the highest bioflocculant yield of 6.92 g/L was achieved. Furthermore, bioflocculant was applied to treat pilot-scale (30 L) of mineral processing wastewater for the first time, and the removal rate of 92.35% was observed when 9 mg/L bioflocculant was added into wastewater. Therefore, this study could promote the resource utilization of kitchen waste and recycling of mineral processing wastewater.

Enhanced decolorization of methyl orange by Bacillus sp. strain with magnetic humic acid nanoparticles under high salt conditions

In this study, magnetic humic acid (MHA) nanoparticle was prepared and confirmed the enhancement on reduction of azo dyes under high salt concentration. The anaerobic growth of the strain Bacillus sp. on quinones makes the biogenic hydroquinone feasible, and the latter was proven to reduce the azo dyes stoichiometrically. This in-situ reversibly oxidation and reduction of MHA acts as electron shuttle to catalyze the biotic reduction of the azo dyes. The biodegradation efficiencies in batch experiments and sequencing batch reactor with MHA were increased by 1.5-2.5 times as compared to that of control without the catalyzer. Moreover, the negligible leaching of HA under various environmental conditions suggests the robustness of the coating of HA on Fe/O surface. These results indicated that the as-prepared MHA could be used as redox mediator to accelerate the extracellular electron transfer, which is of great environmental significance for the removal of hazardous compounds.