Leaf-like Co-ZIF-L derivatives embedded on Co2AlO4/Ni foam from hydrotalcites as monolithic catalysts for toluene abatement

Efficacious destruction of typical aromatic hydrocarbons over CoMn/Ni foam monolithic catalysts with boosted activity and water resistance

Developing cost-effective monolith catalyst with superior low-temperature activity is critical for oxidative efficacious removal of industrial volatile organic compounds (VOCs). However, the complexity of the industrial flue gas conditions demands the need for high moisture tolerance, which is challenging. Herein, CoMn-Metal Organic Framework (CoMn-MOF) was in situ grown on Ni foam (NiF) at room temperature to synthesize the cost-effective monolith catalyst. The optimized catalyst, Co1Mn1/NiF, exhibited excellent performance in toluene oxidation (T90 = 239 °C) due to the substitution of manganese into the cobalt lattice. This substitution weakened the Co-O bond strength, creating more oxygen vacancies and increasing the active oxygen species content. Additionally, experimentally and computationally evidence revealed that the mutual inhibiting effect of three typical aromatic hydrocarbons (benzene, toluene and m-xylene) over the Co1Mn1/NiF catalyst was attributed to the competitive adsorption occurring on the active site. Furthermore, the Co1Mn1/NiF catalyst also presents outstanding water resistance, particularly at a concentration of 3 vol%, where the activity is even enhanced. This was attributed to the lower water adsorption and dissociation energy derived from the interaction between the bimetals. Results demonstrate that the dissociation of water vapor enables more reactive oxygen species to participate in the reaction which reduces the formation of intermediates and facilitates the reaction. This investigation provides new insights into the preparation of oxygen vacancy-rich monolith catalysts with high water resistance for practical applications.

An MgO passivation layer and hydrotalcite derived spinel Co2AlO4 synergically promote photoelectrochemical water oxidation conducted using BiVO4-based photoanodes

MxCo3-xO4 co-catalysed photoanodes with high potential for improvement in PEC water-oxidizing properties are reported. However, it is difficult to control the recombination of photogenerated carriers at the interface between the catalyst and cocatalyst. Here, an ultra-thin MgO passivation layer was introduced into the MxCo3-xO4/BiVO4 coupling system to construct a ternary composite photoanode Co2AlO4/MgO/BiVO4. The photocurrent density of the electrode is 3.52 mA cm-2, which is 3.2 times that of BiVO4 (at 1.23 V vs. RHE). The photocurrent is practically increased by 0.86 mA cm-2 and 1.56 mA cm-2 in comparison with that of Co2AlO4/BiVO4 and MgO/BiVO4 electrodes, respectively. Meanwhile, the Co2AlO4/MgO/BiVO4 electrode has the highest charge separation efficiency, the lowest charge transfer resistance (Rct) and best stability. The excellent PEC performance could be attributed to the inhibitive effect provided by the MgO passivation layer that efficaciously suppresses the electron-hole recombination at the interface and drives the hole transfer outward, which is induced by Co2AlO4 to capture the electrode/electrolyte interface for efficient water oxidation reaction. In order to understand the origin of this improvement, first-principles calculations with density functional theory (DFT) were performed. The theoretical investigation converges to our experimental results. This work proposes a novel idea for restraining the recombination of photogenerated carriers between interfaces and the rational design of efficient photoanodes.

Superadsorbent aerogel based on sunflower stem pith cellulose and layered double hydroxides modified montmorillonite for methylene blue removal from water solution

Sunflower stem pith, an agricultural residue, was used as a starting material for the preparation of bio-based products. Sunflower stem pith nanocellulose (SSP-C) was prepared by sodium hydroxide/urea from the SSP cellulose. The prepared SSP-C was typical of cellulose II. To improve the adsorption capacity of the SSP-C, a bio-based aerogel (SSP-MH) with adsorbed methylene blue (MB) was prepared by compounding layered double hydroxides modified montmorillonite (MH) with SSP-C-based adsorbent, and the chemical characteristics and topology of the adsorbent were determined. The removal performance of SSP-MH in different MB concentrations was examined. Adsorption tests showed that hydrogels containing the same content of MH had higher removal efficiency. The removal rate of MB by SSP-MH was >87.5 % in MB solution (1 g/L), and its maximum adsorption capacity was 263.3 mg/g. The kinetics studies of MB removal were well by quasi-secondary adsorption kinetic model and Langmuir isotherm model. Moreover, the standard free Gibbs energy change of adsorption (ΔG0) was <0, which was favorable for adsorption of MB. The adsorption efficiency of SSP-MH on MB was still above 95 % by the five cycles of the adsorption/desorption experiment. The prepared samples were conducive to the high-value utilization of SSP.

Monolithic Catalyst of Ni Foam-Supported MnOx for Boosting Magnetocaloric Oxidation of Toluene

Catalytic oxidation has been considered an effective technique for volatile organic compound degradation. Development of metal foam-based monolithic catalysts coupling electromagnetic induction heating (EMIH) with efficiency and low energy is critical yet challenging in industrial applications. Herein, a Mn18.2-NF monolithic catalyst prepared by electrodeposition exhibited superior toluene catalytic activity under EMIH conditions, and the temperature of 90% toluene conversion decreased by 89 °C compared to that in resistance furnace heating. Relevant characterizations proved that the skin effect induced by EMIH encouraged activation of gaseous oxygen, leading to superior low-temperature redox properties of Mn18.2-NF under the EMIH condition. In situ Fourier transform infrared spectroscopy results showed that skin effect-induced activation of oxidizing species further accelerated the conversion of intermediates. As a result, the Mn18.2-NF monolithic catalyst under EMIH demonstrated remarkable performance for the toluene oxidation, surpassing the conventional nonprecious metal catalyst and other reported monolithic catalysts.

Pd-Doped Co3 O4 Nanoarray for Efficient Eight-Electron Nitrate Electrocatalytic Reduction to Ammonia Synthesis

Ammonia (NH3 ) is an indispensable feedstock for fertilizer production and one of the most ideal green hydrogen rich fuel. Electrochemical nitrate (NO3 - ) reduction reaction (NO3 - RR) is being explored as a promising strategy for green to synthesize industrial-scale NH3 , which has nonetheless involved complex multi-reaction process. This work presents a Pd-doped Co3 O4 nanoarray on titanium mesh (Pd-Co3 O4 /TM) electrode for highly efficient and selective electrocatalytic NO3 - RR to NH3 at low onset potential. The well-designed Pd-Co3 O4 /TM delivers a large NH3 yield of 745.6 µmol h-1 cm-2 and an extremely high Faradaic efficiency (FE) of 98.7% at -0.3 V with strong stability. These calculations further indicate that the doping Co3 O4 with Pd improves the adsorption characteristic of Pd-Co3 O4 and optimizes the free energies for intermediates, thereby facilitating the kinetics of the reaction. Furthermore, assembling this catalyst in a Zn-NO3 - battery realizes a power density of 3.9 mW cm-2 and an excellent FE of 98.8% for NH3 .

δ-MnO2 decorated layered double oxides in-situ grown on nickel foam towards electrothermal catalysis of n-heptane

Energy-saving and efficient monolithic catalysts are hotspots of catalytic purification of industrial gaseous pollutants. Here, we have developed an electrothermal catalytic mode, in which the ignition temperature required for the reaction is provided by Joule heat generated when the current flows through the catalyst. In this paper, Mn/NiAl/NF, Mn/NiFe/NF and Mn/NF metal-based monolithic catalysts were prepared using nickel foam (NF) as the carrier for thermal and electrothermal catalysis of n-heptane. The results indicated that Mn-based monolithic catalysts exhibit high activity in thermal and electrothermal catalysis. Mn/NiFe/NF achieve conversion of n-heptane more than 99% in electrothermal catalysis under a direct-current (DC) power of 6 W, and energy-saving is 54% compared with thermal catalysis. In addition, the results indicated that the introduction of NiAl (or NiFe) greatly enhanced the catalytic activity of Mn/NF, which attributed to the higher specific surface area, Mn³⁺/Mn⁴⁺, Ni³⁺/Ni²⁺, adsorbed oxygen species (O_ads)/lattice oxygen species (O_latt), redox performance of the catalyst. Electrothermal catalytic activity was significantly higher than thermal catalytic activity before complete conversion, which may be related to electronic effects. Besides, Mn/NiFe/NF has good cyclic and long-term stability in electrothermal catalysis. This paper provided a theoretical basis for applying electrothermal catalysis in the field of VOCs elimination.

Remediation of Cu and As contaminated water and soil utilizing biochar supported layered double hydroxide: Mechanisms and soil environment altering

Preparing materials for simultaneous remediation of anionic and cationic heavy metals contamination has always been the focus of research. Herein a biochar supported FeMnMg layered double hydroxide (LDH) composites (LB) for simultaneous remediation of copper and arsenic contamination in water and soil has been assembled by a facile co-precipitation approach. Both adsorption isotherm and kinetics studies of heavy metals removal by LB were applied to look into the adsorption performance of adsorbents in water. Moreover, the adsorption mechanisms of Cu and As by LB were investigated, showing that Cu in aqueous solution was removed by the isomorphic substitution, precipitation and electrostatic adsorption while As was removed by complexation. In addition, the availability of Cu and As in the soil incubation experiments was reduced by 35.54%-63.00% and 8.39%-29.04%, respectively by using LB. Meanwhile, the addition of LB increased the activities of urease and sucrase by 93.78%-374.35% and 84.35%-520.04%, respectively, of which 1% of the dosage was the best. A phenomenon was found that the richness and structure of microbial community became vigorous within 1% dosage of LB, which indirectly enhanced the passivation and stabilization of heavy metals. These results indicated that the soil environment was significantly improved by LB. This research demonstrates that LB would be an imaginably forceful material for the remediation of anionic and cationic heavy metals in contaminated water and soil.

Novel monolithic catalysts for VOCs removal: A review on preparation, carrier and energy supply

Volatile organic compounds (VOCs) are considered the culprit of secondary air pollution such as ozone, secondary organic aerosols, and photochemical smog. Among various technologies, catalytic oxidation is considered a promising method for the post-treatment of VOCs. Researchers are sparing no effort to develop novel catalysts to meet the requirements of the catalytic process. Compared with the powdered or granular catalysts, the monolithic catalysts have the advantages of low pressure drop, high utilization of active phases, and excellent mechanical properties. This review summarized the new design of monolithic catalysts (including new preparation methods, new supports, and new energy supply methods) for the post-treatment of VOCs. It addressed the advantages of the new designs in detail, and the scope of applicability for each new monolithic catalyst was also highlighted. Finally, the highly required future development trends of monolithic catalysts for VOCs catalytic oxidation are recommended. We expect this work can inspire and guide researchers from both academic and industrial communities, and help pave the way for breakthroughs in fundamental research and industrial applications in this field.

High-Efficiency Electrochemical Nitrate Reduction to Ammonia on a Co3O4 Nanoarray Catalyst with Cobalt Vacancies

Electrocatalytic nitrate reduction reaction (NO₃RR) affords a bifunctional character in the carbon-free ammonia synthesis and remission of nitrate pollution in water. Here, we fabricated the Co₃O₄ nanosheet array with cobalt vacancies on carbon cloth (v_Co-Co₃O₄/CC) by in situ etching aluminum-doped Co₃O₄/CC, which exhibits an excellent Faradaic efficiency of 97.2% and a large NH₃ yield as high as 517.5 μmol h^-1 cm^-2, better than the pristine Co₃O₄/CC. Theoretical calculative results imply that the cobalt vacancies can tune the local electronic environment around Co sites of Co₃O₄, increasing the charge and reducing the electron cloud density of Co sites, which is thus conducive to adsorption of NO₃^- on Co sites for greatly enhanced nitrate reduction. Furthermore, the v_Co-Co₃O₄ (311) facet presents excellent NO₃RR activity with a low energy barrier of about 0.63 eV on a potential-determining step, which is much smaller than pristine Co₃O₄ (1.3 eV).

Rational Design and Construction of Monolithic Ordered Mesoporous Co3O4@SiO2 Catalyst by a Novel 3D Printed Technology for Catalytic Oxidation of Toluene

Here, we report a novel 3D printed layered ordered mesoporous template that can encapsulate active Co-MOFs species in a confined way to achieve the goal of monolithic catalyst. The monolithic OM-Co₃O₄@SiO₂-S catalyst can maintain a macroscopic porous layered structure and a microscopic ordered mesoporous structure. This monolithic OM-Co₃O₄@SiO₂-S catalyst has excellent catalytic performance (T₉₀ = 236 °C), water resistance, and thermal stability in the catalytic combustion of toluene. The catalytic performance of the monolithic OM-Co₃O₄@SiO₂-S catalyst is much better than that of many monolithic catalysts reported in the former. Among them, the introduction of binder aluminum phosphate (AP) can effectively enhance the rheological properties of the printing ink, achieve the purpose of ink writing monolithic layered porous material, enrich the acidic point of the monolithic catalyst, and increase the number of reactive oxygen species. This work reveals a novel monolithic catalyst forming strategy that can combine the advantages of ordered mesoporous materials with active species to form macro-layered porous materials and provide ideas and an experimental basis for the elimination of VOCs in industrial applications.

High performance ozone decomposition over MnAl-based mixed oxide catalysts derived from layered double hydroxides

Mesoporous and dispersed MnAl-based mixed metal oxide catalysts (Mn_xAlO) were fabricated via the calcination of layered double hydroxide (LDH) precursors prepared by the coprecipitation method. Their physiochemical properties were characterized and their catalytic activities for ozone decomposition were evaluated. The results indicate that the prepared Mn_xAlO catalysts have excellent catalytic activity owing to their large specific surface area, abundant surface oxygen vacancies and lower average Mn oxidation states. The Mn/Al atomic ratio and calcination temperature are found to significantly affect the textural properties and catalytic activity for ozone decomposition. The Mn₂AlO-400 catalyst (Mn/Al = 2, calcined at 400 °C) exhibited 84.8% ozone conversion after 8 h reaction under an initial ozone concentration of 45 ± 2 ppm, 30 ± 1 °C, a relative humidity of 50% ± 3%, and a space velocity of 550 000 h⁻¹. The results also show that the catalytic activity of Mn₂AlO-400, which was deactivated owing to the accumulation of oxygen-related intermediates, was recovered by calcination at 400 °C under a N₂ atmosphere for 1 h. A possible reason for catalyst deactivation and regeneration is proposed. This work provides a facile method for fabricating Mn_xAlO catalysts with excellent characteristics to achieve better catalytic activity, which are promising candidates for practical ozone decomposition.

Mesoporous and highly dispersed MnAl-based mixed metal oxide catalysts (Mn_xAlO) were fabricated via the calcination of layered double hydroxides (LDHs), which presented excellent catalytic activity for ozone decomposition.

Metal-organic frameworks-derived hierarchical Co3O4/CoNi-layered double oxides nanocages with the enhanced catalytic activity for toluene oxidation

The development of active transition-metal oxide (TMO) catalysts for the abatement of volatile organic compounds (VOCs) remains a great challenge. Controllable synthesis of TMOs with specific morphology and suitable composition is a promising way for acquiring efficient oxidation catalysts. Herein, a series of hierarchical Co₃O₄/CoNi-layered double oxides (CoNi-LDO) nanocages covered by interlaced nanosheets were synthesized using a cobalt metal-organic framework (Co-MOF)-based strategy. The textural properties, morphology, surface chemical state, and reducibility of the CoNi-LDO catalysts were systematically characterized by various techniques. The catalytic activity toward toluene oxidation and the stability performance was investigated. Results demonstrated that the morphology, composition, and textual properties can be controlled by tuning the post-synthetic etching reaction conditions. Benefiting from the structural and compositional merits, as well as the superior low-temperature reducibility, the CoNi-LDO-1 catalyst (Ni/Co molar ratio was 0.39) with core-shell structure exhibited excellent activity toward toluene oxidation. Our work offers a new strategy for the design of high-performance oxidation catalysts for the abatement of VOCs.

Amorphous cobalt oxide decorated halloysite nanotubes for efficient sulfamethoxazole degradation activated by peroxymonosulfate

In this study, a new hollow nanotube material, 30% Co-CHNTs was prepared by the impregnation-chemical reduction-calcination method. This material can be used as a peroxymonosulfate (PMS) activator to catalyse the degradation of sulfamethoxazole (SMX). The best reaction conditions that correspond to the degradation rate of SMX, up to 97.5%, are as follows: the concentration of SMX is 10 mg L^-1, the amount of catalyst is 0.20 g L^-1, the dosage is 1.625 mM, and the solution pH is 6.00. X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma optical emission spectrometry (ICP-OES) show that the calcined composites mainly stimulate an increase in the content of bivalent cobalt in PMS and reduce the leaching of cobalt ions after the reaction. Additionally, the 30% Co-CHNTs + PMS reaction system exhibits a reasonable SMX degradation rate in a natural organic matter solution and excellent stability after three repeated experiments. Furthermore, the possible degradation mechanism in the 30% Co-CHNTs + PMS reaction system was analysed through electron paramagnetic resonance (EPR) and free-radical capture experiments, and it was observed that the non-radical degradation of ¹O₂ plays a leading role in SMX degradation. Finally, according to the nine degradation intermediates detected by liquid chromatography-mass spectrometry (LC-MS), four possible SMX degradation routes were proposed. This study proved that a 30% Co-CHNTs heterogeneous catalyst is easily prepared, inexpensive, and environmentally friendly and has potential application in antibiotic wastewater treatment.

Design and Fabrication of the Evolved Zeolitic Imidazolate Framework-Modified Polylactic Acid Nonwoven Fabric for Efficient Oil/Water Separation

Design of durable and recyclable superhydrophobic materials for oil/water separation is a major concern in the field of wastewater treatment. Functionalization of a biodegradable matrix with controllable grown crystals brings out a new research perspective. In this study, multiscale zeolitic imidazolate frameworks (ZIFs) were grown and decorated on a polylactic acid (PLA) nonwoven fabric (NWF) to construct a superhydrophobic material by an in situ growth method and a spraying process. The stable superhydrophobic layer contains two kinds of ZIF crystals showing microscale flake-like structures and nanoscale particles. The morphology and surface energy of such a hierarchically structured ZIF-modified PLA_NWF is controllable by the adjustment of experimental parameters. The as-prepared PLA hybrid materials exhibit high separation efficiency and recyclability as for water-nitromethane and water-toluene mixtures. Based on the wetting envelopes of the ZIF-modified PLA material, its separation performance for various oil/water mixtures can be preliminarily assessed before the application.

Cobalt vacancies assisted ion diffusion in Co2AlO4 carbon nanofibers for enhancing lithium battery performance

The rational design of one-dimensional nanofibers, concentrating on the compositions, morphology, structure and defects, has emerging importance in the preparation of anode materials with desired performance for lithium-ion batteries. In the present work, we prepared cobalt vacancies enriched Co₂AlO₄/carbon nanofibers coated with Co₂AlO₄ nanosheets by using electrospinning and multi-step sintering processes. As the anode of the lithium-ion battery, the as-prepared nanofibers show excellent cycling stability, and particularly the discharge capacity can remain at 627.4 mA h g^-1 after 500 cycles under 500 mA g^-1. We contributed the improved performances to the carbon-based networks, the presence of cobalt vacancy on Co₂AlO₄ and the larger specific surface area of the present species. Moreover, density functional theory (DFT) calculations have implied that introducing Co vacancies could reduce the energy barrier of ion diffusion, leading to a faster diffusion rate of lithium ions during cycling. Apparently, the present approach could afford many essential advantages for anode material preparation, such as carbon-based matrix, larger specific surface area and cation vacancy, and more importantly, it can be extended to other spinel mixed transition metal oxides.

On the Activity and Selectivity of CoAl and CoAlCe Mixed Oxides in Formaldehyde Production from Pulp Mill Emissions

Contaminated methanol has very good potential for being utilized in formaldehyde production instead of its destructive abatement. The activities, selectivities and stabilities of cobalt–alumina and cobalt–alumina–ceria catalysts prepared by the hydrotalcite-method were investigated in formaldehyde production from emissions of methanol and methanethiol. Catalysts were thoroughly characterized and the relationships between the characterization results and the catalytic performances were drawn. The preparation method used led to the formation of spinel-type structures in the form of Co2AlO4 based on x-ray diffraction (XRD) and Raman spectroscopy. Ceria seems to be present as CeO2, even though interaction with alumina is possible in the fresh catalyst. The same structure is maintained after pelletizing the cobalt–alumina–ceria catalyst. The cobalt–alumina–ceria catalyst was slightly better in formaldehyde production, probably due to lower redox temperatures and higher amounts of acidity and basicity. Methanol conversion is negatively affected by the presence of methanethiol; however, formaldehyde yields are improved. The stability of the pelletized catalyst was promising based on a 16 h experiment. During the experiment, cobalt was oxidized (Co2+ → Co3+), cerium was reduced (Ce4+ → Ce3+) and sulfates were formed, especially on the outer surface of the pellet. These changes affected the low temperature performance of the catalyst; however, the formaldehyde yield was unchanged.

An efficient polymer coating for highly acid-stable zeolitic imidazolate frameworks based composite sponges

Zeolitic imidazolate frameworks (ZIFs) possess tremendous potential in various adsorption and catalysis areas for their particular structures. However, the dispersibility and acid stability of ZIFs are important issues hindering their applications. To address these challenges, a transparent polydimethysiloxane (PDMS) coating was constructed to heterogeneously anchor the Cu doped ZIF-67 (Cu/ZIF-67) nanoparticles on melamine sponge surface, achieving a PDMS-coated ZIF three-dimensional composite sponge. Thus PDMS coating could also effectively protect ZIFs from acid damage to prolong the service life of photocatalyticity. It was demonstrated that the composite sponges were able to repeatedly (over 40 cycles) degrade Sudan I dyes with remarkable photocatalytic efficiency (>97%). More importantly, the ion impenetrability of PDMS coating made the ZIFs based composite a longer term catalytic life than unprotected Cu/ZIF-67 under acid condition. Incidentally, due to the introduction of rough ZIFs and hydrophobic PDMS coating, the obtained sponge also exhibits super-hydrophobicity (158.5°), great compressibility and excellent oil/acid water separation performance. We expect that such a polymer coating strategy could act as a novel inspiration for extending the applications and life span of ZIF-based composites.

Preparation of a Series of Pd@UIO-66 by a Double-Solvent Method and Its Catalytic Performance for Toluene Oxidation

This paper reports on the preparation, characterization, and catalytic properties of the Pd@UIO-66 for toluene oxidation. The samples are prepared by the double-solvent method to form catalysts with large specific surface area, highly dispersed Pd⁰ (Elemental palladium) and abundant adsorbed oxygen, which are characterized by X-ray Photoelectron Spectroscopy (XPS), Brunauer-Emmett-Teller (BET) and Transmission Electron Microscopy (TEM). The results show that as the Pd content increases, the adsorbed oxygen content further increases, but at the same time Pd⁰ will agglomerate and lose some active sites, which will affect its catalytic performance. While 0.2%Pd@UIO-66 has the highest concentration of Pd⁰, the result shows it has the best catalytic activity and the T₉₀ temperature is 210 °C.

In situ DRIFT spectroscopy insights into the reaction mechanism of CO and toluene co-oxidation over Pt-based catalysts

The Pt–CeO₂ catalyst with adsorption sites and oxygen-rich vacancies exhibited outstanding activity towards CO and toluene co-oxidation.