Highly efficient degradation of 2,4-dichlorophenol over CeO2/g-C3N4 composites under visible-light irradiation: Detailed reaction pathway and mechanism

Exploring the twin potential of nanostructured TiO2:SeO2 as a promising visible light photocatalyst and selective fluorosensing platform

The present work describes the development of TiO2/SeO2 nanostructure as a potential candidate for visible light photocatalysis as well as selective fluorophore for the sensing of picric acid. The obtained nanostructure consists of uniform globular nanoparticles having approximate size of 170 nm and possess an optical band gap of 2.33 eV with absorption maxima at 473 nm. The photocatalyst was able to achieve 90.34% degradation efficiency for 2, 4-dichlorophenol (2,4-DCP) with rate constant of 0.0046 min-1 in the visible region. Further the nanostructure was able to serve as a selective fluorophore for sensing of Picric acid portraying more than 95% of fluorescence quenching when the concentration of PA is 10-4 M. Theoretical calculations indicate the interaction of organic pollutants with the nanostructure and reveal that both picric acid (- 66.21 kcal/mol) and 2,4-DCP (- 12.31 kcal/mol) possess more negative binding energy values demonstrating a strong interaction of both with the nanostructure, making it suitable for the degradation as well as sensing of organic pollutants. Thus this study explains the potential of prepared catalyst for waste water treatment.

Building a Charge Transfer Bridge between g-C3N4 and Perovskite with Molecular Engineering to Achieve Efficient Perovskite Solar Cells

Effective defect passivation and efficient charge transfer within polycrystalline perovskite grains and corresponding boundaries are necessary to achieve highly efficient perovskite solar cells (PSCs). Herein, focusing on the boundary location of g-C3N4 during the crystallization modulation on perovskite, molecular engineering of 4-carboxyl-3-fluorophenylboronic acid (BF) on g-C3N4 was designed to obtain a novel additive named BFCN. With the help of the strong bonding ability of BF with both g-C3N4 and perovskite and favorable intramolecular charge transfer within BFCN, not only has the crystal quality of perovskite films been improved due to the effective defects passivation, but the charge transfer has also been greatly accelerated due to the formation of additional charge transfer channels on the grain boundaries. As a result, the champion BFCN-based PSCs achieve the highest photoelectric conversion efficiency (PCE) of 23.71% with good stability.

Coupling MoSe2 with Non-Stoichiometry Ni0.85 Se in Carbon Hollow Nanoflowers for Efficient Electrocatalytic Synergistic Effect on Li-O2 Batteries

Li-O2 batteries could deliver ultra-high theoretical energy density compared to current Li-ion batteries counterpart. The slow cathode reaction kinetics in Li-O2 batteries, however, limits their electrocatalytic performance. To this end, MoSe2 and Ni0.85 Se nanoflakes were decorated in carbon hollow nanoflowers, which were served as the cathode catalysts for Li-O2 batteries. The hexagonal Ni0.85 Se and MoSe2 show good structural compatibility with the same space group, resulting in a stable heterogeneous structure. The synergistic interaction of the unsaturated atoms and the built-in electric fields on the heterogeneous structure exposes abundant catalytically active sites, accelerating ion and charge transport and imparting superior electrochemical activity, including high specific capacities and stable cycling performance. More importantly, the lattice distances of the Ni0.85 Se (101) plane and MoSe2 (100) plane at the heterogeneous interfaces are highly matched to that of Li2 O2 (100) plane, facilitating epitaxial growth of Li2 O2 , as well as the formation and decomposition of discharge products during the cycles. This strategy of employing nonstoichiometric compounds to build heterojunctions and improve Li-O2 battery performance is expected to be applied to other energy storage or conversion systems.

Degradation of 2, 4-dichlorophenol by peroxymonosulfate catalyzed by ZnO/ZnMn2 O4

In this study, a highly efficient peroxymonosulfate (PMS) activator, ZnO/ZnMn2 O4 , was synthesized using a simple one-step hydrothermal method. The resulting bimetallic oxide catalyst demonstrated a homogenous and high-purity composition, showcasing synergistic catalytic activity in activating PMS for degrading 2, 4-dichlorophenol (2, 4-DCP) in aqueous solution. This catalytic performance surpassed that of individual ZnO, Mn2 O3 , and ZnMn2 O4 metal materials. Under the optimized conditions, the removal efficiency of 2, 4-DCP reached approximately 86% within 60 min, and the catalytic ability remained almost constant even after four cycles of recycling. The developed degradation system proved effective in degrading other azo-dye pollutants. Certain inorganic anions such as HPO4 - , HCO3 - , and NO3 - significantly inhibited the degradation of 2, 4-DCP, while Cl- and SO4 2- did not exhibit such interference. Results from electrochemical experiments indicated that the electron transfer ability of ZnO/ZnMn2 O4 surpassed that of individual metals, and electron transfer occurred between ZnO/ZnMn2 O4 and the oxidant. The primary active radicals responsible for degrading 2, 4-DCP were identified as SO4 •- , OH• and O2 •- , generated through the oxidation and reduction of PMS catalyzed by Zn (II) and Mn (III). Furthermore, X-ray photoelectron spectroscopy (XPS) analysis of the fresh and used catalysts revealed that the exceptional electron transfer ability of ZnO facilitated the valence transfer of Mn (III) and the transfer of electrons to the catalyst's oxygen surface, thus enhancing the catalytic efficiency. The analysis of radicals and intermediates indicates that the two main pathways for degrading 2, 4-DCP involve hydroxylation and radical attack on its aromatic ring. PRACTITIONER POINTS: A bimetallic ZnO/ZnMn2 O4 catalyst was synthesized and characterized. ZnO/ZnMn2 O4 can synergistically activate PMS to degrade 2, 4-DCP compared with single metal oxide. Three primary active radicals, O2 •- , • OH, and SO4 •- , were generated to promote the degradation. ZnO promoted electron transfer among the three species of Mn to facilitate oxidizing pollutants. Hydroxylation and radical attack on the aromatic ring of 2, 4-DCP are the two degradation pathways.

Photocatalytic degradation of 2,4-dichlorophenol using nanomaterials silver halide catalysts

In this study, the photocatalytic activity of nanomaterials Ag/AgX (X = Cl, Br, I) is reported. Highly efficient silver halide (Ag/AgX where X = Cl, Br, I) photocatalysts were synthesized through a hydrothermal method. The samples were characterized using a range of techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) to check their structural, morphology, textural and optical properties. In addition, the photocatalytic activity of photocatalysts was evaluated through the degradation of 2,4-dichlorophenol (2,4-DCP) under UV and visible light irradiation. XRD analysis confirmed the presence of a single-phase structure (pure phase) in the synthesized photocatalysts. SEM micrographs showed agglomeration with a non-uniform distribution of particles, which is a characteristic of surfactant-free precipitation reactions in aqueous media. The Ag/AgBr photocatalyst exhibited the best degradation efficiency, resulting in 83.37% and 89.39% photodegradation after 5 h of UV and visible light irradiation, respectively. The effect of catalyst loading, initial solution pH, and 2,4-DCP concentration was investigated for the best-performing Ag/AgBr photocatalyst. The degradation kinetics were best described by the pseudo-first-order Langmuir-Hinshelwood model. The photocatalytic capacity of Ag/AgBr decreased by 50% after five reuse cycles. SEM images revealed heightened levels of photodegradation on the catalyst surface. The study proved the feasibility of using simple synthesis methods to produce visible light active photocatalysts capable of degrading refractory phenolic pollutants in aqueous systems.

Efficient degradation of 2,4-dichlorophenol by heterogeneous electro-Fenton using bulk carbon aerogels modified in situ with FeCo-LDH as cathodes: Operational parameters and mechanism exploration

In this study, an in situ grown FeCo-Layered double hydroxide anchored to the surface of a bulk carbon aerogel (FeCo-LDH/CA) for contaminant degradation during the heterogeneous electro-Fenton (EF) process. The results exhibited that the FeCo-LDH/CA cathode achieved 100% of 2,4-dichlorophenol (2,4-DCP = 20 mg/L) degradation within 120 min at pH = 3, application current 20 mA, and Na2SO4 concentration 0.05 M. Moreover, the degradation efficiency was impressive in the range of pH = 2-9. The coexistence of the Fe (III)/Fe (II) and Co (III)/Co (II) as active sites on the cathode surface promoted the in-situ decomposition of H2O2 to form reactive oxygen species (ROS). •OH and O2- were confirmed to be the major degradation pollutants of ROS. Furthermore, density functional theory (DFT) was used to predict the reaction sites of 2,4-DCP, and its possible degradation pathways were proposed. The toxicity of intermediate products was evaluated and decreased after degradation. In addition, the eight cycle experiments and the degradation of other typical contaminants demonstrated the satisfactory stability and applicability of the synthetic cathode. This study presents the preparation of an efficient and stable EF cathode, further promoting the application of iron-based composites in wastewater treatment.

Enriched photocatalytic and photoelectrochemical activities of a 2D/0D g-C3N4/CeO2 nanostructure

Sunlight-powered photocatalysts made from CeO2 nanosized particles and g-C3N4 nanostructures were produced through a thermal decomposition process with urea and cerium nitrate hexahydrate. The preparation of g-C3N4, CeO2, and a binary nanostructured g-C3N4/CeO2 photocatalyst was done through a facile thermal decomposition method. The structural properties were analyzed using powder X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy (XPS). Photocatalyst properties were characterized by using crystal violet (CV), a UV-Vis spectrophotometer, photocurrent and electron impedance spectroscopy (EIS). The structural and morphological analyses revealed that the g-C3N4/CeO2 nanostructures significantly enhanced the photoactivity for CV dye degradation under simulated sunlight, with a degradation rate of 94.5% after 105 min, compared to 82.5% for pure g-C3N4 and 45% for pure CeO2. This improvement was attributed to the noticeable visible light absorption and remarkable charge separation abilities of the nanostructures. Additionally, the g-C3N4/CeO2 nanostructures showed notable PEC performance under simulated sunlight. This study presents an easy and efficient method for producing g-C3N4 photocatalysts decorated with semiconductor materials and provides insights for designing nanostructures for photocatalytic and energy applications.

Controlled Synthesis of Ag-SnO2/α-Fe2O3 Nanocomposites for Improving Visible-Light Catalytic Activities of Pollutant Degradation and CO2 Reduction

The key to developing highly active α-Fe2O3-based photocatalysts is to improve the charge separation and efficiently utilize the electrons with sufficient thermodynamic energy. Herein, α-Fe2O3 nanosheets (FO) were synthesized using a metal-ion-intervened hydrothermal method and then coupled with SnO2 nanosheets (SO) to obtain SO/FO nanocomposites. Subsequently, nanosized Ag was selectively loaded on SO using the photo-deposition method to result in the ternary Ag-SO/FO nanocomposites. The optimal nanocomposite could realize the efficient aerobic degradation of 2,4-dichlorophenol as a representative organic pollutant under visible-light irradiation (>420 nm), exhibiting nearly six-fold degradation rates of that for FO. Additionally, the Ag-SO/FO photocatalyst is also applicable to the visible-light degradation of other organic pollutants and even CO2 reduction. By using steady-state surface photovoltage spectroscopy, fluorescence spectroscopy, and electrochemical methods, the photoactivity enhancement of Ag-SO/FO is principally attributed to the improved charge separation by introducing SO as an electron platform for the high-energy-level electrons of FO. Moreover, nanosized Ag on SO functions as a cocatalyst to further improve the charge separation and facilitate the catalytic reduction. This work provides a feasible design strategy for narrow-bandgap semiconductor-based photocatalysts by combining an electron platform and a cocatalyst.

Enhanced Photocatalytic H2 Evolution Performance of the Type-II FeTPPCl/Porous g-C3N4 Heterojunction: Experimental and Density Functional Theory Studies

It is of great significance to improve the photocatalytic performance of g-C3N4 by promoting its surface-active sites and engineering more suitable and stable redox couples. Herein, first of all, we fabricated porous g-C3N4 (PCN) via the sulfuric acid-assisted chemical exfoliation method. Then, we modified the porous g-C3N4 with iron(III) meso-tetraphenylporphine chloride (FeTPPCl) porphyrin via the wet-chemical method. The as-fabricated FeTPPCl-PCN composite revealed exceptional performance for photocatalytic water reduction by evolving 253.36 and 8301 μmol g-1 of H2 after visible and UV-visible irradiation for 4 h, respectively. The performance of the FeTPPCl-PCN composite is ∼2.45 and 4.75-fold improved compared to that of the pristine PCN photocatalyst under the same experimental conditions. The calculated quantum efficiencies of the FeTPPCl-PCN composite for H2 evolution at 365 and 420 nm wavelengths are 4.81 and 2.68%, respectively. This exceptional H2 evolution performance is because of improved surface-active sites due to porous architecture and remarkably improved charge carrier separation via the well-aligned type-II band heterostructure. Besides, we also reported the correct theoretical model of our catalyst through density functional theory (DFT) simulations. It is found that the hydrogen evolution reaction (HER) activity of FeTPPCl-PCN arises from the electron transfer from PCN via Cl atom(s) to Fe of the FeTPPCl, which forms a strong electrostatic interaction, leading to a decreased local work function on the surface of the catalyst. We suggest that the resultant composite would be a perfect model for the design and fabrication of high-efficiency heterostructure photocatalysts for energy applications.

Mechanism of nitrogen-doped biochar activated peroxymonosulfate for degradation of 2,4-dichlorophenol

Biochar activated peroxymonosulfate has been widely used to degrade organic pollutants. However, the chemical inertness of the sp2 hybrid conjugated carbon framework and the limited number of active sites on the pristine biochar resulted in the low catalytic activity of the system, restricting its further application. In this study, nitrogen-doped biochar was prepared following a simple one-step synthesis method taking advantage of the similar atomic radius and significant difference in electronegativity of N and C atoms to explore the properties and mechanisms of biochar-mediated peroxymonosulfate activation to degrade 2,4-dichlorophenol. Results from degradation experiments revealed that the catalytic efficiency of the prepared nitrogen-doped biochar was approximately 37.8 times higher than that of the undoped biochar. Quenching experiments combined with Electron paramagnetic resonance (EPR) analysis illustrated that the generated singlet oxygen (¹O₂) and superoxide anion radical (O₂^•-) were the main reactive oxidative species that dominated the target organics removal processes. This work will provide a theoretical basis for expanding the practical application of nitrogen-doped biochar to remediate water pollution via peroxymonosulfate activation.

Recent advances in structural engineering of photocatalysts for environmental remediation

Photocatalysis appears to be an appealing approach for environmental remediation including pollutants degradation in water, air, and/or soil, due to the utilization of renewable and sustainable source of energy, i.e., solar energy. However, their broad applications remain lagging due to the challenges in pollutant degradation efficiency, large-scale catalyst production, and stability. In recent decades, massive efforts have been devoted to advance the photocatalysis technology for improved environmental remediation. In this review, the latest progress in this aspect is overviewed, particularly, the strategies for improved light sensitivity, charge separation, and hybrid approaches. We also emphasize the low efficiency and poor stability issues with the current photocatalytic systems. Finally, we provide future suggestions to further enhance the photocatalyst performance and lower its large-scale production cost. This review aims to provide valuable insights into the fundamental science and technical engineering of photocatalysis in environmental remediation.

Construction of a novel Cu1.8S/NH2-La MOFs decorated Black-TNTs photoanode electrode for high-efficiently photoelectrocatalytic degradation of 2, 4-dichlorophenol

Photoelectrocatalysis (PEC) has long been regarded as an efficient and green method to eliminate various organic pollutants from wastewater. However, the lack of highly photoelectrocatalytic active and stable electrodes limits the development of the PEC technologies. Herein, a novel hierarchical photo-electrode with hollow Cu_1.8S/NH₂-La MOFs decorated black titanium dioxide nanotubes (Cu_1.8S/NH₂-La MOFs/Black TNTs) was fabricated by a two-step water-heating method. The prepared photoelectrode was used to degradation of 2, 4-dichlorophenol (2, 4-DCP). Analysis of photoelectrocatalytic degradation process of 2, 4-DCP was evaluated using UV-Vis absorption spectroscopy and the main degradation paths were analyzed by LC-MS. The results showed that 99.3% of the pollutant could be rapidly degraded within 180 min. Furthermore, the Cu_1.8S/NH₂-La MOFs/Black TNTs photoelectric pole exhibited excellent stability after 15 cycling experiments.

Recyclable Fe/S co-doped nanocarbon derived from metal-organic framework as a peroxymonosulfate activator for efficient removal of 2,4-dichlorophenol

In this study, a recyclable Fe/S co-doped nanocarbon (Fe/S-NC) was successfully prepared by the pyrolysis of ZIF-8 confined with Fe(II) and added S. Characterization showed that a highly graphitized carbon-based material co-doped with sulfur and iron was successfully prepared. This Fe/S-NC can efficiently activate PMS to remove organic pollutants in water. The effect of different synthesis conditions on the degradation efficiency of 2,4-DCP was studied by orthogonal experiments. The optimized Fe/S-NC/PMS system exhibited excellent catalytic performance and could degrade more than 99.7% of 2,4-DCP within 30 min. Even after 5 cycles, the degradation efficiency could still be maintained above 96.3%, which proved that the catalytic system had good cycle performance. In addition, the effect of pH on catalytic performance showed that the degradation rate of 2,4-DCP exceeds 96.7% in the pH range of groundwater (pH = 5-9). We had confirmed that the free radicals that caused 2,4-DCP degradation were SO₄^·-, ·OH, O₂^·-, and ¹O₂, which played important roles in degrading organic pollutants. These research results show that the Fe/S-NC/PMS system can be used as an efficient, stable, and environmentally friendly system to treat organic pollutants in groundwater.

Flat Silk Cocoon-Based Dressing: Daylight-Driven Rechargeable Antibacterial Membranes Accelerate Infected Wound Healing

One of the leading causes of death globally, especially in underdeveloped countries, is bacterial infection. Recently, the prevalence of infections from antibiotic-resistant bacteria has been increasing, which makes the need for innovative antibacterial wound dressings urgent. It is reported that g-C₃ N₄ -based flat silk cocoons (FSCs) with rechargeable antibacterial activity can efficiently generate reactive oxygen species (ROS) under daylight irradiation. The photoactive FSCs store the ROS and then release them in the dark. The engineered FSCs exhibit integrated properties of good biocompatibility, strong mechanical characteristics, robust photoactivity with photostorability, and excellent bactericidal efficiency (99.9% contact killing). In a rat model of infected wounds, the photoactive FSCs induce faster healing and reduce bacterial infections. The successful application of these FSC materials as wound dressings may provide a versatile platform for exploring the use of green photoactive antibacterial materials for accelerated wound healing and prevention of infections.

Photocatalytic degradation of organic pollutants in water by N-doping ZnS with Zn vacancy: enhancement mechanism of visible light response and electron flow promotion

In order to improve the visible light response, N-doping ZnS (N-ZnS) nanospheres with Zn vacancy and porous surface were prepared by a simple one-pot hydrothermal method. Characterizations and density functional theory simulations showed excellent visible light response of N-ZnS. N-doping introduced impurity energy levels, which led to orbital hybridization and changed the original dipole moment. The presence of ortho Zn vacancy (O-Znv) can effectively reduce e--h+ recombination and photocorrosion. Furthermore, O-Znv caused lattice distortion (twisted the -S-Zn-N-(O-Znv)-S-Zn-S- chemical bond chain), resulting in "vacancy effect" to accelerate e- flow. Under visible light, the photocatalytic degradation efficiency of tetracycline (TC) and 2,4-dichlorophenol (2,4-DCP) was 90.31% and 60.84%, respectively. TOC degradation efficiency was 31.4% and 25.6%, respectively. Combined with Fukui index and LC-MS methods, it was found that TC and 2,4-DCP were degraded under the constant attack of active substances such as ·OH. This work can provide a reference for the application of catalytic materials in the field of visible light photocatalysis.

Vertically grown CeO2 and TiO2 nanoparticles over the MIL53Fe MOF as proper band alignments for efficient H2 generation and 2,4-DCP degradation

The design of highly efficient photoca talysts for clean energy production and environmental remediation are the grand challenges of scientific research. Herein, TiO₂@MIL53Fe and CeO₂@MIL53Fe composite photocatalysts are synthesized via solvothermal technique. The SEM and TEM micrographs reveal that TiO₂ and CeO₂ nanoparticles are vertically grown onto the surface of MIL53Fe MOF. Further, HRTEM micrograph confirmed the formation of heterojunction. It has been investigated that the resultant TiO₂@MIL53Fe and CeO₂@MIL53Fe photocatalysts exhibit remarkably improved visible light activities for H₂ production and 2,4-dichlorophenol (2,4-DCP) degradation in comparison to the bare MIL53Fe photocatalyst. The enhanced photoactivities of the fabricated TiO₂@MIL53Fe and CeO₂@MIL53Fe photocatalysts are attributed to significantly promoted charge separation as confirmed via the surface photo voltage (SPV) and photoluminescence (PL) results. Further, the photocatalysts exhibit high stability and reusability as confirmed via the recyclable tests. This work will promote the design of MOF-based efficient photocatalysts for clean energy production and environment purification.

Nanobioremediation: A sustainable approach for the removal of toxic pollutants from the environment

In recent years, the proportion of organic and inorganic contaminants has increased rapidly due to growing human interference and represents a threat to ecosystems. The removal of these toxic pollutants from the environment is a difficult task. Physical, chemical and biological methods are implemented for the degradation of toxic pollutants from the environment. Among existing technologies, bioremediation in combination with nanotechnology is the most promising and cost-effective method for the removal of pollutants. Numerous studies have shown that exceptional characteristics of nanomaterials such as improved catalysis and adsorption properties as well as high reactivity have been subjects of great interest. There is an emerging trend of employing bacterial, fungal and algal cultures and their components, extracts or biomolecules as catalysts for the sustainable production of nanomaterials. They can serve as facilitators in the bioremediation of toxic compounds by immobilizing or inducing the synthesis of remediating microbial enzymes. Understanding the association between microorganisms, contaminants and nanoparticles (NPs) is of crucial importance. In this review, we focus on the removal of toxic pollutants using the cumulative effects of nanoparticles with microbial technology and their applications in different domains. Besides, we discuss how this novel nanobioremediation technique is significant and contributes towards sustainability.

Nitrogen-doping coupled with cerium oxide loading co-modified graphitic carbon nitride for highly enhanced photocatalytic degradation of tetracycline under visible light

The increasingly serious pollution of antibiotics brings an enormous threat to the ecological environment and human health. Graphite phase carbon nitride (g-C₃N₄), as a popular photocatalytic material, is widely used in photocatalytic degradation of antibiotics in water. In order to make up for the shortage of g-C₃N₄ monomer, CeO₂/N-doped g-C₃N₄ (CeNCN) composite photocatalysts co-modified with nitrogen doping and CeO₂ loading were designed and synthesized with the idea of expanding visible light absorption and promoting photogenerated carrier separation. CeNCN exhibits excellent photodegradation performance, the removal rate of tetracycline reached 80.09% within 60 min, which is much higher than that of g-C₃N₄ (CN) and N-doped g-C₃N₄ (NCN); and the quasi-first-order degradation rate constant is 0.0291, which is 7.86 and 2.29 times higher than CN and NCN. Electron spin resonance and free radical trapping experiments confirmed that h⁺, O₂^- and OH are the active substances in the photocatalytic system. After 5 cycles, the degradation efficiency of tetracycline still exceeds 75%, which indicates that CeNCN has good stability. This work proves that N-doping and CeO₂ loading can effectively broaden the photoresponse range of g-C₃N₄, facilitate the separation of photogenerated electron-hole pairs, and provide a reference for the construction of g-C₃N₄-based photocatalyst with high-efficiency photodegradation activity.

Green synthesis of MIL-100(Fe) derivatives and revealing their structure-activity relationship for 2,4-dichlorophenol photodegradation

MIL-100(Fe), a kind of iron-based metal-organic framework materials (MOFs), can be synthesized at room temperature or hydrothermal conditions, which are promising precursor materials for preparing photocatalysts to degrade some recalcitrant chlorophenols in industrial wastewater. However, the relationship between the structural characterization of MIL-100(Fe) derivatives and their photodegradation behavior of chlorophenol pollutants is still unclear. Thus, in this work, a porous Z-scheme α-Fe₂O₃/MIL-100(Fe) composite was successfully fabricated via partial-pyrolysis of MIL-100(Fe) precursor synthesized through green synthesis route, which was further used for degrading high-concentration of 2,4-dichlorophenol under visible-light illumination (λ > 420 nm). The effects of synthesis route and pyrolysis temperature of MIL-100(Fe) on the degradation efficiencies of as-derived materials for 2,4-dichlorophenol were investigated. The structure-activity relationship was illuminated in detail. Otherwise, the influence of several process factors, i.e., initial concentration and pH of the 2,4-dichlorophenol solution, catalyst dosage on the degradation efficiency of 2,4-dichlorophenol has also been performed. The removal efficiency of 2,4-dichlorophenol with the initial concentration of 100 mg L^-1 reached up to 87.65% under optimized conditions. Lastly, the possible mechanism was explored based on trapping experiments and some other characterization results. The study in this paper not only exhibited new insight into the modified α-Fe₂O₃ material with high photocatalytic activity but also provided a promising method for treating wastewater containing 2,4-dichlorophenol or other similar organic pollutants.

A robust biocatalyst based on laccase immobilized superparamagnetic Fe3O4@SiO2-NH2 nanoparticles and its application for degradation of chlorophenols

The presence of chlorophenols in water and wastewater is considered a serious environmental issue. To eliminate these micropollutants, biodegradation of chlorophenols using enzyme-nanoparticle conjugated biocatalyst, is proposed as an economical and eco-friendly method. Herein, amino-functionalized superparamagnetic Fe₃O₄@SiO₂-NH₂ nanoparticles with core-shell structure were constructed as a promising carrier for immobilization of laccase from Trametes versicolor. Compared with free laccase, Fe₃O₄@SiO₂-NH₂-Laccase displayed remarkable outcomes in all major areas such as temperature and storage stabilities, and tolerance to organic solvents and metal ions. The biocatalytic performance and reusability of Fe₃O₄@SiO₂-NH₂-Laccase were evaluated for the degradation of 2,4-dichlorophenol (2,4-DCP) and 2,4,6-trichlorophenol (2,4,6-TCP) in repeated cycles. Even after 10 successive reuses, the degradation rate of 2,4-DCP and 2,4,6-TCP were found to be 54.9% and 68.7%, respectively. The influences of solution pH, initial chlorophenol concentration, and temperature on the degradation rate of these two chlorophenols were evaluated. The degradation intermediate products including dimers, trimers, and tetramers of 2,4-DCP and 2,4,6-TCP were identified. Release of chloride ions was observed during the enzymatic degradation of these two chlorophenols. Based on the determination of intermediate products and released chloride ions, the degradation pathway that was involved in dehydrogenation, reactive radical intermediates formation, dechlorination, self-coupling and oligomers/polymers formation was proposed. The toxicity of these two chlorophenols and their intermediates was substantially reduced during the enzymatic degradation. The results of this study might present an alternative clean biotechnology for the remediation of 2,4-DCP and 2,4,6-TCP contaminated water matrices.

Recent Progress in the Synthesis and Applications of Composite Photocatalysts: A Critical Review

Photocatalysis is an advanced technique that transforms solar energy into sustainable fuels and oxidizes pollutants via the aid of semiconductor photocatalysts. The main scientific and technological challenges for effective photocatalysis are the stability, robustness, and efficiency of semiconductor photocatalysts. For practical applications, researchers are trying to develop highly efficient and stable photocatalysts. Since the literature is highly scattered, it is urgent to write a critical review that summarizes the state-of-the-art progress in the design of a variety of semiconductor composite photocatalysts for energy and environmental applications. Herein, a comprehensive review is presented that summarizes an overview, history, mechanism, advantages, and challenges of semiconductor photocatalysis. Further, the recent advancements in the design of heterostructure photocatalysts including alloy quantum dots based composites, carbon based composites including carbon nanotubes, carbon quantum dots, graphitic carbon nitride, and graphene, covalent-organic frameworks based composites, metal based composites including metal carbides, metal halide perovskites, metal nitrides, metal oxides, metal phosphides, and metal sulfides, metal-organic frameworks based composites, plasmonic materials based composites and single atom based composites for CO₂ conversion, H₂ evolution, and pollutants oxidation are discussed elaborately. Finally, perspectives for further improvement in the design of composite materials for efficient photocatalysis are provided.

Piezoelectric polarization promoted spatial separation of photoexcited electrons and holes in two-dimensional g-C3N4 nanosheets for efficient elimination of chlorophenols

Graphitic carbon nitride (g-C₃N₄) has been proved to be a potential photocatalyst for environment purification, but the high recombination rate of photogenerated carriers leads to the low photocatalytic efficiency. Herein, we report the enhanced degradation of chlorophenols by 2D ultrathin g-C₃N₄ nanosheets with intrinsic piezoelectricity through photopiezocatalysis strategy. Under the simultaneous visible-light irradiation and ultrasonic vibration, the 2D g-C₃N₄ presented improved removal efficiency for elimination of 2,4-dichlorophenol (2,4-DCP) with an apparent rate constant of 6.65 × 10^-2 min^-1, which was 6.7 and 2.2 times of the photocatalysis and piezocatalysis, respectively. The improved removal efficiency was attributed to the sufficient separation of free charges driven by the ultrasound-induced piezoelectric field in the 2D g-C₃N₄, which was demonstrated by the enhanced current response under photopiezocatalysis mode. Additionally, the photopiezocatalysis of 2D g-C₃N₄ was proved to possess well universality for removing different chlorophenols, as well as high durability and dechlorination efficiency. Finally, a possible photopiezocatalytic mechanism for removal of 2,4-DCP was proposed based on the electron paramagnetic resonance (EPR) technique and the determination of intermediates through liquid chromatography-mass spectrometry (LC-MS) analysis. This work provides a promising strategy for the design of energy-conversion materials towards capturing solar and mechanical energy in ambient environment.

A critical review on relationship of CeO2-based photocatalyst towards mechanistic degradation of organic pollutant

Nanostructured photocatalysts commonly offered opportunities to solve issues scrutinized with the environmental challenges caused by steep population growth and rapid urbanization. This photocatalyst is a controllable characteristic, which can provide humans with a clean and sustainable ecosystem. Over the last decades, one of the current thriving research focuses on visible-light-driven CeO₂-based photocatalysts due to their superior characteristics, including unique fluorite-type structure, rigid framework, and facile reducing oxidizing properties of cerium's tetravalent (Ce⁴⁺) and trivalent (Ce³⁺) valence states. Notwithstanding, owing to its inherent wide energy gap, the solar energy utilization efficiency is low, which limits its application in wastewater treatment. Numerous modifications of CeO₂ have been employed to enhance photodegradation performances, such as metals and non-metals doping, adding support materials, and coupling with another semiconductor. Besides, all these doping will form a different heterojunction and show a different way of electron-hole migration. Compared to conventional heterojunction, advanced heterojunction types such as p-n heterojunction, Z-scheme, Schottky junction, and surface plasmon resonance effect exhibit superior performance for degradation owing to their excellent charge carrier separation, and the reaction occurs at a relatively higher redox potential. This review attends to providing deep insights on heterojunction mechanisms and the latest progress on photodegradation of various contaminants in wastewater using CeO₂-based photocatalysts. Hence, making the CeO₂ photocatalyst more foresee and promising to further development and research.

Steered polymorphic nanodomains in TiO2 to boost visible-light photocatalytic oxidation

A breakthrough in enhancing visible-light photocatalysis of wide-bandgap semiconductors such as prototypical titania (TiO₂) via cocatalyst decoration is still challenged by insufficient heterojunctions and inevitable interfacial transport issues. Herein, we report a novel TiO₂-based composite material composed of in situ generated polymorphic nanodomains including carbon nitride (C₃N₄) and (001)/(101)-faceted anatase nanocrystals. The introduction of ultrafine C₃N₄ results in the generation of many oxygen vacancies in the TiO₂ lattice, and simultaneously induces the exposure and growth of anatase TiO₂(001) facets with high surface energy. The photocatalytic performance of C₃N₄-induced TiO₂ for degradation of 2,4-dichlorophenol under visible-light irradiation was tested, its apparent rate being up to 1.49 × 10⁻² min⁻¹, almost 3.8 times as high as that for the pure TiO₂ nanofibers. More significantly, even under low operation temperature and after a long-term photocatalytic process, the composite still exhibits exceptional degradation efficiency and stability. The normalized degradation efficiency and effective lifespan of the composite photocatalyst are far superior to other reported modified photocatalysts.

A novel TiO₂-based composite material composed of in situ generated biomimetic polymorphic nanodomains including carbon nitride (C₃N₄) and (001)-/(101)-faceted anatase nanocrystals is reported.

A novel S-scheme heterojunction based on 0D/3D CeO2/Bi2O2CO3 for photocatalytic degradation of organic pollutants

A distinct S-scheme heterojunction of 0D/3D CeO2/Bi2O2CO3 photocatalyst was successfully synthesized via hydrothermal method employing for photocatalytic degradation of methylene blue (MB), tetracycline (TC) and aureomycin (AM). Compared with bare...

Advanced photocatalytic performance of PVP-modified BiOBr materials for the removal of 2,4-DCP and mechanism insight

The BiOBr material is induced by PVP at room temperature to form an efficient visible light catalyst for removing non-dye organic pollutants from wastewater.

Removal of chlorophenols in the aquatic environment by activation of peroxymonosulfate with nMnOx@Biochar hybrid composites: Performance and mechanism

Functional nMnOx@RBC composites were synthesized via a simple co-precipitation method. The nanomaterials have efficient activity in activating peroxymonosulfate (PMS) for removal of chlorophenols (CPs). Rice husk biochar (RBC) could support nMnOx, and acted as an electron shuttle to mediate electron transfer reaction. nMnOx@RBC had superior catalytic and adsorption properties and exhibited remarkable synergistic effects. This led to complete degradation of 4-chloro-3-methyl phenol (CMP) in 60 min at the natural pH (7.0). Reactive oxygen species (ROS) were also identified via the corresponding scavengers. The results indicated that singlet oxygen (¹O₂) played a dominant role in the degradation of CMP within nMnOx@RBC system. Moreover, the mechanism of CMP decomposition was rationally proposed, and possible intermediate products were deduced. The high degradation performances of diverse CPs were also observed in nMnOx@RBC/PMS system. This research aims to offer novel insights into carbon-metal nanomaterials for the elimination of emerging pollutants.

Plasmon Assisted Highly Efficient Visible Light Catalytic CO2 Reduction Over the Noble Metal Decorated Sr-Incorporated g-C3N4

The photocatalytic performance of g-C₃N₄ for CO₂ conversion is still inadequate by several shortfalls including the instability, insufficient solar light absorption and rapid charge carrier's recombination rate. To solve these problems, herein, noble metals (Pt and Au) decorated Sr-incorporated g-C₃N₄ photocatalysts are fabricated via the simple calcination and photo-deposition methods. The Sr-incorporation remarkably reduced the g-C₃N₄ band gap from 2.7 to 2.54 eV, as evidenced by the UV-visible absorption spectra and the density functional theory results. The CO₂ conversion performance of the catalysts was evaluated under visible light irradiation. The Pt/0.15Sr-CN sample produced 48.55 and 74.54 µmol h^-1 g^-1 of CH₄ and CO, respectively. These amounts are far greater than that produced by the Au/0.15Sr-CN, 0.15Sr-CN, and CN samples. A high quantum efficiency of 2.92% is predicted for the Pt/0.15Sr-CN sample. Further, the stability of the photocatalyst is confirmed via the photocatalytic recyclable test. The improved CO₂ conversion performance of the catalyst is accredited to the promoted light absorption and remarkably enhanced charge separation via the Sr-incorporated mid gap states and the localized surface plasmon resonance effect induced by noble metal nanoparticles. This work will provide a new approach for promoting the catalytic efficiency of g-C₃N₄ for efficient solar fuel production.

A Comparative Study of Cerium- and Ytterbium-Based GO/g-C3N4/Fe2O3 Composites for Electrochemical and Photocatalytic Applications

The design of sustainable and efficient materials for efficient energy storage and degradation of environmental pollutants (specifically organic dyes) is a matter of major interest these days. For this purpose, cerium- and ytterbium-based GO/g-C3N4/Fe2O3 composites have been synthesized to explore their properties, especially in charge storage devices such as supercapacitors, and also as photocatalysts for the degradation of carcinogenic dyes from the environment. Physicochemical studies have been carried out using XRD, FTIR, SEM, and BET techniques. Electrochemical techniques (cyclic voltammetry, galvanic charge discharge, and electrochemical impedance spectroscopy) have been employed to measure super-capacitance and EDLC properties. Results show that the gravimetric capacitance calculated from GCD results is 219 Fg−1 for ytterbium- and 169 Fg−1 for cerium-based nanocomposites at the current density of 1 A/g and scan rate of 2 mV/sec. The specific capacitance calculated for the ytterbium-based nanocomposite is 189 Fg−1 as compared to 125 Fg−1 for the cerium-based material. EIS results pointed to an enhanced resistance offered by cerium-based nanocomposites as compared to that of ytterbium, which can be assumed with the difference in particle size, as confirmed from structural studies including XRD. From obtained results, ytterbium oxide-based GO/g-C3N4/Fe2O3 is proven to be a better electro-catalyst as compared to cerium-based nanocomposites. Photocatalytic results are also in agreement with electrochemical results, as the degradation efficiency of ytterbium oxide-based GO/g-C3N4/Fe2O3 (67.11 and 83.50% for rhodamine B and methylene blue dyes) surpasses values observed for cerium-based GO/g-C3N4/Fe2O3 (63.08 and 70.61%).

Application of a fluidized three-dimensional electrochemical reactor with Ti/SnO2-Sb/β-PbO2 anode and granular activated carbon particles for degradation and mineralization of 2,4-dichlorophenol: Process optimization and degradation pathway

A three-dimensional electrochemical reactor with Ti/SnO₂-Sb/β-PbO₂ anode and granular activated carbon (3DER-GAC) particle electrodes were used for degradation of 2,4-dichlorophenol (2,4-DCP). Process modeling and optimization were performed using an orthogonal central composite design (OCCD) and genetic algorithm (GA), respectively. Ti/SnO₂-Sb/β-PbO₂ anode was prepared by electrochemical deposition method and then its properties were studied by FESEM, EDX, XRD, Linear sweep voltammetry and accelerated lifetime test techniques. The results showed that lead oxide was precipitated as highly compact pyramidal clusters in the form of β-PbO₂ on the electrode surface. In addition, the prepared anode had high stability (170 h) and oxygen evolution potential (2.32 V). A robust quadratic model (p-value < 0.0001 and R² > 0.99) was developed to predict the 2,4-DCP removal efficiency in the 3DER-GAC system. Under optimal conditions (pH = 4.98, Na₂SO₄ concentration = 0.07 M, current density = 35 mA cm^-2, GAC amount = 25 g and reaction time = 50 min), the removal efficiency of 2,4-DCP in the 3DER-GAC system and the separate electrochemical degradation process (without GAC particle electrode) were 99.8 and 71%, respectively. At a reaction time of 80 min, the TOC removal efficiencies in the 3DER-GAC and the separate electrochemical degradation system were 100 and 57.5%, respectively. Accordingly, the energy consumed in these two systems was calculated to be 0.81 and 1.57 kWh g^-1 TOC, respectively. Based on the results of LC-MS analysis, possible degradation pathways of 2,4-DCP were proposed. Trimerization and ring opening reactions were the two dominant mechanisms in 2,4-DCP degradation.

Using Post-graphene 2D Materials to Detect and Remove Pesticides: Recent Advances and Future Recommendations

Detection and removal of pesticides have become increasingly imperative as the widespread production and use of pesticides severely contaminate soil and groundwater and cause serious problems to non-target species such as human and animals. Recently, new two-dimensional materials beyond graphene (e.g., transition metal dichalcogenides, layered double hydroxides), called post-graphene two-dimensional materials (pg-2DMs), have exhibited promising potentials in detecting and removing pesticides due to their unique physiochemical attributes such as high photocatalytic activity and large specific surface area. This review summarizes the recent advances of utilizing pg-2DMs to detect, degrade and adsorb pesticides (e.g., thiobencarb, methyl parathion, paraquat). The current gaps and future prospects of this field are discussed as well.

An Interface Optimization Strategy for g-C3N4-Based S-Scheme Heterojunction Photocatalysts

Graphitic carbon nitride (CN) has attracted much attention in photocatalytic fields due to its unique electronic band structure. However, the rapid recombination of photogenerated carriers severely inhibits its catalytic activity. The heterojunction structure has been widely confirmed to significantly improve the photocatalytic activity of CN through the formed interface structure. However, researchers often give attention to the band matching and conductivity of the cocatalyst, while the importance of the interface as a migration channel for photogenerated carriers is often overlooked. In this work, we adopt the strategy of morphology engineering to regulate the morphology of the CN photoactive component so as to achieve the interface optimization of the traditional heterojunction structure. The photocatalytic degradation experiment of rhodamine B shows that compared with the traditional CeO₂@CN heterojunction structure, the photocatalytic activity of the interface-optimized CeO₂/CN is increased by more than 20%. The following points could be used to explain the improvement of photocatalytic activity: (I) the formed S-scheme heterojunction structure, which inhibits the recombination of useful electrons and holes but expedites the recombination of relatively useless electrons and holes, (II) the increased interface area, which provides more carrier migration channels, and (III) the reduced interface contact resistance, which facilitates the separation and migration of photogenerated carriers. Furthermore, the interface optimization of the traditional Al₂O₃@CN and Fe₂O₃@CN heterojunction structures also achieved consistent results. This shows that the strategy in this work is a universal method for interface optimization, which provides potential alternative for further improving the catalytic activity of other heterojunction composites.

Facile one-pot synthesis of carbon self-doped graphitic carbon nitride loaded with ultra-low ceric dioxide for high-efficiency environmental photocatalysis: Organic pollutants degradation and hexavalent chromium reduction

In the present study, an innovative carbon self-doped g-C₃N₄ (CCN) loaded with ultra-low CeO₂ (0.067-0.74 wt%) composite photocatalyst is successfully synthesized via a facile one-pot hydrothermal and calcination method. The CeO₂/CCN exhibits superior photocatalytic performance for tetracycline degradation (78.9% within 60 min), H₂O₂ production (151.92 μmol L^-1 within 60 min), and Cr(VI) reduction (99.5% within 40 min), which much higher than that of g-C₃N₄, CCN, CeO₂, and CeO₂/g-C₃N₄. The enhanced photocatalytic performance is originated from the fact that the doping of C can efficaciously broaden the utilization range of solar light and improve the reduction ability of photogenerated electrons. Meanwhile, the ultra-low loading of CeO₂ can effectually promote the migration of photogenerated electrons and enhance the specific surface area. Besides, the experiments of pH effect and cycle ability indicate that CeO₂/CCN has excellent durability and stability. Finally, the photocatalytic mechanism of CeO₂/CCN is systematically discussed. This work proves that combining element doping and semiconductor coupling is a promising strategy to design high-efficiency g-C₃N₄-based photocatalysts.

Z-scheme Au decorated carbon nitride/cobalt tetroxide plasmonic heterojunction photocatalyst for catalytic reduction of hexavalent chromium and oxidation of Bisphenol A

Au/g-C₃N₄/Co₃O₄ plasmonic heterojunction photocatalyst was successfully prepared by in-situ forming Co₃O₄ nanocubes on the Au/g-C₃N₄ nanosheets. The catalytic activities of the photocatalysts were systematically studied through the catalytic reduction of hexavalent chromium (Cr⁶⁺) and oxidation of Bisphenol A (BPA) under visible light irradiation, while according to the degradation products determined by GC-MS, the catalytic degradation pathway of BPA was proposed. 4Au/g-C₃N₄/Co₃O₄ sample exhibits the most efficient catalytic activities, and the photocatalytic reduction and photocatalytic oxidation efficiencies can obtain 85.6% and 90.3%, respectively. The main reasons of the enhancing catalytic performance are the high absorption capability to visible light generated by localized surface plasmon resonance and the effective interface charge separation. Finally, we speculated that the Au/g-C₃N₄/Co₃O₄ sample followed Z-scheme charge transfer mechanism in this study, which is verified by the analysis of experiment and theoretical calculation results.

A rational design of g-C3N4-based ternary composite for highly efficient H2 generation and 2,4-DCP degradation

In this work, g-C₃N₄ based ternary composite (CeO₂/CN/NH₂-MIL-101(Fe)) has been fabricated via hydrothermal and wet-chemical methods. The composite showed superior photoactivities for H₂O reduction to produce H₂ and 2,4-dichlorophenol (2,4-DCP) degradation. The amount of H₂ evolved over the composite under visible and UV-visible irradiations is 147.4 µmol·g^-1·h^-1 and 556.2 µmol·g^-1·h^-1, respectively. Further, the photocatalyst degraded 87% of 2,4-DCP in 2 hrs under visible light irradiations. The improved photoactivities are accredited to the synergistic-effects caused by the proper band alignment with close interfacial contact of the three components that significantly promoted charge transfer and separation. The 2,4-DCP degradation over the composite is dominated by OH radical rather than h⁺ and O₂^- as investigated by scavenger trapping experiments. This is further supported by the electron para-magnetic resonance (EPR) study. This work provides new directions for the development of g-C₃N₄ based highly efficient ternary composite materials for clean energy generation and pollution control.