Facile synthesis of hierarchically nanostructured bismuth vanadate: An efficient photocatalyst for degradation and detection of hexavalent chromium

Smart paper-based materials incorporating nitrogen and boron co-doped MXene quantum dots for rapid adsorption and sensitive detection of Cr2O72. J Colloid Interface Sci 2025;679:510-520. [PMID: 39378686 DOI: 10.1016/j.jcis.2024.10.007] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Dichromate ion (Cr2O72-) is a highly toxic chromium-containing compound that poses significant hazards to the digestive, respiratory systems, skin, and mucous membranes. Currently, the detection and adsorption of Cr2O72- face significant challenges, including the time-consuming and low sensitivity nature of traditional analytical methods. The limited efficiency and capacity of existing adsorbents hinder their practical application in real-time water quality monitoring and environmental remediation. Herein, using polyethyleneimine-functionalized (PEI) pulp fiber paper as the substrate, we developed smart paper-based materials (designated as NB-MQDs@PP) incorporated with nitrogen and boron co-doped MXene quantum dots (NB-MQDs) for rapid adsorption and sensitive detection of Cr2O72-. Compared to undoped MQDs, NB-MQDs exhibited longer excitation wavelength and enhanced oxidation stability. As anticipated, NB-MQDs achieved rapid (response time of 10 s) and sensitive (detection limit of 1.2 μM) recognition of Cr2O72- within a wide pH range with a quenching efficiency of 99.9%. Simultaneously, two on-site detection methods, immersion and cyclic filtration, were constructed based on NB-MQDs@PP. The detection limit of the immersion method was 17.0 nM, while the cyclic filtration method had a detection limit as low as 3.8 nM, surpassing the majority of those reported literatures. Remarkably, NB-MQDs@PP exhibited outstanding enrichment capacity towards Cr2O72-, with an adsorption capacity of up to 162.4 mg/g. This work provides a novel strategy for creating unique paper-based materials with excellent capture and monitoring dual-function, which can be customized according to the requirements of various application scenarios.

Surfactants Modulating of BiVO4 on Photocatalytic Property as a Regulation of Surface Free Energy

BiVO4 is a stable photocatalytic material but has poor photocatalytic activity in visible light. Herein, the surfactants were investigated to enhance the photocatalytic degradation of tetracycline (TC) of BiVO4 through a hydrothermal method. The different molecular structures and properties of surfactant-modified BiVO4 show clustered small spheres and stacked plate-like microcrystals. The N-hexadecyltrimethylammonium chloride (CTAC)-modified BiVO4 (BiVO4-CTAC) with stacked plate-like morphology increases the light absorption range and decreases the energy band gap. Surfactants with different hydrophilic groups and molecular structures affect the formation process of BiVO4, regulating the morphology, crystal structure, and crystalline surface exposure of BiVO4. BiVO4-CTAC has demonstrated superior TC degradation efficiency compared with the original BiVO4 (BiVO4-Blank). This enhancement is attributed to the observation in the Nyquist plot, where BiVO4-CTAC exhibits the smallest arc radius, indicative of reduced charge transfer resistance and improved charge separation. Furthermore, holes (h+) and superoxide radicals (•O2-) reactive species are the main active radicals for TC photocatalytic degradation. This study develops a novel method to synthesize monoclinic phase lamellar BiVO4 materials by simply changing the surfactant type. This study holds potential implications for advancing surfactant-assisted synthesis of high-efficiency photocatalysts.

Bismuth-based nanoparticles and nanocomposites: synthesis and applications

In the vast landscape of materials science, bismuth emerges as a compelling element with unique properties and diverse applications. Its intriguing characteristics and advancements in nanotechnology have propelled bismuth-based nanoparticles to the forefront of scientific exploration, promising breakthroughs in various disciplines. This comprehensive review explores diverse methods for synthesizing bismuth-based nanoparticles and nanocomposites, ranging from conventional approaches such as hydrothermal and sol-gel to innovative techniques such as microwave-assisted, microemulsion, and green synthesis. The latter includes unique processes such as laser ablation, chemical vapor deposition methods, combustion as well as surface-mediated and bacterium-based synthesis. Each method's strengths, weaknesses, and specifications are critically examined. Further, the review delves into the adaptable applications of bismuth-based nanoparticles and nanocomposites, emphasizing their antibacterial activity, contribution to photovoltaic studies, potential in supercapacitors, and efficacy in photocatalytic degradations of various organic dyes. The objective of this review is to present a thorough summary of the synthesis methodologies and applications of bismuth-based nanoparticles and nanocomposites, offering valuable insights for researchers and professionals engaged in the burgeoning field of nanoparticles.

Simultaneous photocatalytic removal of tetracycline and hexavalent chromium by BiVO4/0.6CdS photocatalyst: Insights into the performance, evaluation, calculation and mechanism

In this study, a novel Z-scheme heterojunction on bismuth vanadium/cadmium sulfide (BiVO4/0.6CdS) was developed and evaluated for simultaneous photocatalytic removal of combined tetracycline (TC) and hexavalent chromium Cr(Ⅵ) pollution under visible light. Based on the analysis of intermediate products and theoretical calculation, the property of the intermediate products of TC degradation and the effect of built-in electric field (IEF) of composite materials on photo-generated carrier separation were illustrated. According to the experiments and evaluation results, the performance of BiVO4/0.6CdS is higher than CdS 2.83 times and 4.82 times under the visible light conditions, with the aspect of simultaneous oxidizing TC and reducing Cr(Ⅵ), respectively. The catalyst has a faster removal rate in the binary composite pollution system than the single one. Therefore, the photocatalytic degradation of TC using BiVO4/0.6CdS can reduce the toxic effect of TC on the environment. The aforementioned evaluation provides a new design strategy for Z-scheme heterojunction to simultaneous photocatalytic degradation of composite organic and inorganic pollutants.

Combined experimental and first principles look into (Ce, Mo) doped BiVO4

Here we investigated the effects of Ce and Mo doping on hydrothermally synthesized bismuth vanadate BiVO4 nanoparticles (NPs). The existence of monoclinic scheelite and tetragonal zircon phases of NPs was validated from Rietveld refinement of the powdered X-ray diffraction, room temperature Raman, and Fourier-transform infrared spectroscopy. The co-doping of Bi and V sites with respective Ce and Mo dopants in a mixed tetragonal zircon and monoclinic scheelite phases of BiVO4 lattice was corroborated from high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy. The photoluminescence measurements revealed enhancement of photo-generated carrier recombination in (Ce, Mo) co-doped BiVO4 NPs which may have hampered its photocatalytic efficiency in degrading the methylene blue dye. The simulations based on Hubbard U corrected density functional theory (DFT+U) suggest that Mo and Ce co-doping introduced deep impurity states which may have facilitated the photo-generated carrier recombination detrimental to photocatalytic performance. The UV-vis diffuse reflectance measurements provided evidence for the presence of these defect states. In summary, this work may have presented a comprehensive experimental analysis of (Ce, Mo) doped BiVO4 supported by DFT simulations.

The visible-light-driven photocatalytic reduction of Cr6+ using BiVO4: assessing the effect of Au deposition and the reaction parameters

In this work, fern-leaf-like BiVO4 was used to photocatalytically reduce Cr6+ in water. Nanosized BiVO4 displayed bandgap energy and specific surface area of 2.49 eV and 5.65 m2 g-1, respectively. Metallic Au nanoparticles were deposited on the BiVO4 to increase the photocatalytic performance. To optimize the reaction conditions, the sacrificial agents methanol, ethanol, formic acid, dimethyl sulfoxide, and KI were tested, while different catalyst dosages and Au loadings were assessed. The best sacrificial agent was formic acid, which was used at an optimal concentration of 0.01 mol L-1. The complete removal of Cr6+ was attained after 90 min of visible light irradiation using a catalyst dosage of 1.5 g L-1. Depositing metallic Au nanoparticles barely improved the photocatalytic performance, thus unmodified BiVO4 was used to remove Cr6+ in tap water. The matrix effect slowed the photocatalytic process, and the complete removal of Cr6+ was achieved in 120 min. Cr3+ and Cr6+ species were precipitated on the catalyst surface at the end of the photocatalytic process; still, BiVO4 displayed high stability after three reaction cycles.

β-Bi2O3-Bi2WO6 Nanocomposite Ornated with meso-Tetraphenylporphyrin: Interfacial Electrochemistry and Photoresponsive Detection of Nanomolar Hexavalent Cr

Hexavalent chromium exposure via inhalation, ingestion, or both has been proven to adversely affect internal organs, induce toxic effects, cause allergies, and contribute to the development of cancer. It requires a substantial and challenging effort to detect several heavy metal ions conveniently, sensitively, and reliably by using materials that are easy to synthesize and have a high yield. The impact of light on the electrocatalytic oxidation/reduction process proves an environmentally friendly methodology with numerous applications in pollution control. The extensive use of photoactive materials in photoelectrochemical (PEC) sensors necessitates the development of stable and highly effective photoactive materials. Hence, the solvothermal synthesis of the organic-inorganic hybrid nanocomposite β-Bi2O3-Bi2WO6/H2TPP with varying weight percentages of meso-tetraphenylporphyrin (H2TPP) resulted in a selective electrode for electrocatalytic and photoelectrocatalytic reduction of Cr6+ on fluorine-doped tin oxide (FTO) by an adsorption-reduction mechanism. H2TPP increases the active site density and provides an effective surface area for efficient adsorption by providing both pyridinic- and pyrrolic-N atoms to β-Bi2O3-Bi2WO6/H2TPP. H2TPP could effectively adsorb Cr6+ in the β-Bi2O3-Bi2WO6/H2TPP composite system through electrostatic interaction, and the adsorbed Cr6+ ions were reduced to trivalent chromium Cr3+, resulting in promising Cr6+ sensing. The projected density of states and Bader charge calculations result in the electrostatic attraction among the N-2p orbital of H2TPP and the 3d and 4s orbitals of the Cr atom, resulting in the adsorption of the hexavalent Cr atom onto the active center of H2TPP. Moreover, the addition of H2TPP results in the development of a mesoporous surface that offers strong electrical conductivity, a substantial surface area, improved charge-mass transport, intimate contact between the electrolyte and catalyst, an extended fluorescence lifetime, and increased stability. The role of pH values was thoroughly investigated. All electrochemical and photoelectrochemical studies were carried out on 5 wt % H2TPP-ornated β-Bi2O3-Bi2WO6. Nanocomposite β-Bi2O3-Bi2WO6/5 wt % H2TPP demonstrated reliable cyclic stability, reproducibility, good sensitivity (8.005 μA mM cm-2), and a low limit of detection (LOD) (8.0 nM) toward photoelectrocatalytic reduction of Cr6+. The interference study in the presence of a few inorganic entities exhibited excellent selectivity. This tale amplification approach for developing a β-Bi2O3-Bi2WO6/5 wt % H2TPP nanocomposite system suggests a deeper understanding of the application of photoelectrocatalytic reduction of Cr6+ in environmental remediation with real samples under light irradiation.

Morphological and elemental tuning of BiOCl/BiVO4 heterostructure for uric acid electrochemical sensor and antibiotic photocatalytic degradation

Deep eutectic solvents (DES) consisting of EG-(ChCl: C₂H₆O₂) and TU-(ChCl: CH₄N₂S) assisted synthesized BiOCl/BiVO₄ heterostructured catalyst studied for electrochemical uric acid (UA) sensor and tetracycline photocatalytic degradation. The chemical composition of the BiOCl/BiVO₄ catalyst was analyzed by X-ray photoelectron spectroscopy (XPS). UV-vis spectroscopy reveals increased absorption of visible light till the near-infrared region, which results in a narrowing of band gap energy from 2.3 eV to 2.2 eV for BiOCl/BiVO₄-TU. Morphology of catalyst analyzed using field-emission scanning electron microscope (FE-SEM) and Transmission electron microscope (TEM) technique. Time-Resolved photoluminescence (TRPL) confirms an increased lifetime of e^-/h⁺ pair after heterostructure formation. The catalyst-modified glassy carbon electrode shows selectivity toward the detection of uric acid (UA). The limit of detection (LOD) is estimated to be 0.04688 μM for UA; also, interference and stability of catalyst were studied. Photocatalytic activity of the synthesized catalyst was investigated by degrading tetracycline (TC) antibiotic pollutants, and their intermediate product was analyzed by ion trap mass spectrometry (MS).

Fabrication of Praseodymium Vanadate Nanoparticles on Disposable Strip for Rapid and Real-Time Amperometric Sensing of Arsenic Drug Roxarsone

Nanomaterials have versatile properties owing to their high surface-to-volume ratio and can thus be used in a variety of applications. This work focused on applying a facile hydrothermal strategy to prepare praseodymium vanadate nanoparticles due to the importance of nanoparticles in today's society and the fact that their synthesis might be a challenging endeavor. The structural and morphological characterizations were carried out to confirm the influence of the optimizations on the reaction's outcomes, which revealed praseodymium vanadate (PrVO₄) with a tetragonal crystal system. In this regard, the proposed development of electrochemical sensors based on the PrVO₄ nanocatalyst for the real-time detection of arsenic drug roxarsone (RXS) is a primary concern. The detection was measured by amperometric (i-t) signals where PrVO₄/SPCE, as a new electrochemical sensing medium for RXS detection, increased the sensitivity of the sensor to about ∼2.5 folds compared to the previously reported ones. In the concentration range of 0.001-551.78 μM, the suggested PrVO₄/SPCE sensor has a high sensitivity for RXS, with a detection limit of 0.4 nM. Furthermore, the impact of several selected potential interferences, operational stability (2000 s), and reproducibility measurements have no discernible effect on RXS sensing, making it the ideal sensing device feasible for technical analysis. The real-time analysis reveals the excellent efficiency and reliability of the prosed sensor toward RXS detection with favorable recovery ranges between ±97.00-99.66% for chicken, egg, water, and urine samples.

Fabricating BiOCl/BiVO4 nanosheets wrapped in a graphene oxide heterojunction composite for detection of an antihistamine in biological samples

Antibiotics are essential medications for human and animal health, as they are used to battle urinary infections and bacterial diseases. Therefore, the rapid determination of antibiotic drugs in biological samples is necessary to address the current clinical challenge. Here, we developed a heterojunction ternary composite of BiOCl/BiVO₄ nanosheets enriched with graphene oxide (BiOCl/BiVO₄@GO) for accurate and minimal-level detection of an antihistamine (promethazine hydrochloride, PMZ) in urine samples. The BiOCl/BiVO₄ nanosheets were prepared by a wet chemical approach using a deep eutectic green solvent. The spectroscopic and analytical methods verified the formation and interaction of the BiOCl/BiVO₄@GO composite. Our results showed that the thoroughly exfoliated BiOCl/BiVO₄@GO composite retained good electrical conductivity and fast charge transfer toward the electrode-electrolyte interface in neutral aqueous media. In addition, the experimental conditions were accurately optimized, and the BiOCl/BiVO₄@GO composite showed excellent electrocatalytic activity toward the oxidation of PMZ. Indeed, the BiOCl/BiVO₄@GO composite demonstrated a good linear response range (0.01-124.7 μM) and a detection level of 3.3 nM with a sensitivity of 1.586 μA μM^-1 cm^-2. In addition, the BiOCl/BiVO₄@GO composite had excellent storage stability, good reproducibility, and reliable selectivity. Finally, the BiOCl/BiVO₄@GO displayed a desirable recovery level of PMZ in urine samples for real-time monitoring.

In Situ Synthesis of a Bismuth Vanadate/Molybdenum Disulfide Composite: An Electrochemical Tool for 3-Nitro-l-Tyrosine Analysis

The quantification of 3-nitro-l-tyrosine (NO₂-Tyr), an in vivo biomarker of nitrosative stress, is indispensable for the clinical intervention of various inflammatory disorders caused by nitrosative stress. By integrating the unique features of BiVO₄ and MoS₂ with matching bandgap energies, electrode materials with amplified response signals can be developed. In this regard, we introduce a hydrothermally synthesized bismuth vanadate sheathed molybdenum disulfide (MoS₂@BiVO₄) heterojunction as a highly sensitive electrode material for the determination of NO₂-Tyr. Excellent electrochemical behavior perceived for the MoS₂@BiVO₄ augments the performance of the sensor and allows the measurement of NO₂-Tyr in biological media without any time-consuming pretreatments. The synergistic interactions between BiVO₄ and MoS₂ heterojunctions contribute to low resistance charge transfer (R_ct = 159.13 Ω·cm²), a reduction potential E_pc = -0.58 V (vs Ag/AgCl), and a good response range (0.001-526.3 μM) with a lower limit of detection (0.94 nM) toward the detection of NO₂-Tyr. An improved active surface area, reduced charge recombination, and high analyte adsorption contribute to the high loading of the biomarker for improved selectivity (in the presence of 10 interfering compounds), operational stability (1000 s), and reproducibility (six various modified electrodes). The proposed sensor was successfully utilized for the real-time determination of NO₂-Tyr in water, urine, and saliva samples with good recovery values (±98.94-99.98%), ascertaining the reliability of the method. It is noteworthy that the electrochemical activity remains unaffected by other redox interferons, thus leading to targeted sensing applications.

Effect of water-oil ratio on the photocatalytic performance of visible light-active BiVO4 nanoparticles prepared by inverse microemulsion-calcination method

Nowadays, nano-photocatalysts (NPs) have become the research focus in the field of photocatalysis due to their excellent photocatalytic activity, and microemulsion is an effective method to prepare high-efficiency nano-photocatalysts. Here, BiVO₄ NPs with high efficiency under visible light were prepared by a combination of reverse microemulsion method and calcination method. XRD, SEM, TEM, XPS, DRS, PL, BET and other characterization tests were used to comprehensively explore the influence of water-oil ratio on the physicochemical properties of the catalysts. The results show that BiVO₄ NPs of monoclinic scheelite with high crystallization degree can be obtained by this method. The microscopic morphology, specific surface area and total pore volume of BiVO₄ NPs are significantly affected by the water-oil ratio. It is difficult to obtain BiVO₄ NPs with small particle size and uniform dispersion under the condition of too low or too high water-oil ratio. Meanwhile, the photogenerated carrier recombination efficiency of the catalyst is significantly improved, thus reducing the photocatalytic activity of the catalyst. Strikingly, the BiVO₄ NPs obtained under the condition of water-oil ratio is 20 exhibited well-dispersed nanospheres with diameters ranging from 80 to 100 nm. It has the highest photocatalytic activity due to its high crystallinity, large specific surface area and total pore volume and relatively low photogenerated carrier recombination efficiency. Under visible light irradiation, the degradation efficiency of RhB can reach 97.69% in 100 min, and the rate constant is 0.03253 min^-1.

One-step fabrication of dual functional Tb3+ coordinated polymeric micro/nano-structures for Cr(VI) adsorption and detection

Hexavalent chromium Cr(VI) has been considered as one of the most hazardous heavy metals because of its strong and persistent toxicity to the ecosystem and human beings. Herein, we have synthesized a double hydrophilic block co-polyarylene ether nitriles (abbreviated as dhPEN) bearing aromatic backbone as well as pendent carboxyl and sulfonate groups. Afterward, the synthesized dhPEN has been co-assembled with the lanthanide Tb³⁺ via a one-step solvent exchange protocol, leading to generation of Tb³⁺ coordinated dhPEN (Tb-dhPEN) micro/nano-structures that exhibit good adsorption capacity and detection sensitivity towards Cr(VI). More specifically, the direct self-assembly of dhPEN and Tb³⁺ in mixed H₂O/DMF solvents resulted to Tb-dhPEN microparticles with lamellar structures, which exhibited a high Cr(VI) adsorption capacity approaching to 402 mg/g. The detailed characterization confirm that Cr(VI) is adsorbed and partially reduced to Cr(III) by the Tb-dhPEN microparticles via chemical interaction. Furthermore, the self-assembly of dhPEN with Tb³⁺ in the H₂O/DMF mixed solvents containing NaOH contributed to the generation of spherical nanoparticles showing green emission at 545 nm, which can be selectively quenched by the Cr(VI), leading to the specific detection of trace concentration of Cr(VI) down to 0.12 nM as well as reliable determination of Cr(VI) presented in real environmental samples.

Electrostatic Field Enhanced Photocatalytic CO2 Conversion on BiVO4 Nanowires

The recombination loss of photo-carriers in photocatalytic systems fatally determines the energy conversion efficiency of photocatalysts. In this work, an electrostatic field was used to inhibit the recombination of photo-carriers in photocatalysts by separating photo-holes and photo-electrons in space. As a model structure, (010) facet-exposed BiVO₄ nanowires were grown on PDMS-insulated piezo-substrate of piezoelectric transducer (PZT). The PZT substrate will generate an electrostatic field under a certain stress, and the photocatalytic behavior of BiVO₄ nanowires is influenced by the electrostatic field. Our results showed that the photocatalytic performance of the BiVO₄ nanowires in CO₂ reduction in the negative electrostatic field is enhanced to 5.5-fold of that without electrostatic field. Moreover, the concentration of methane in the products was raised from 29% to 64%. The enhanced CO₂ reduction efficiency is mainly attributed to the inhibited recombination loss of photo-carriers in the BiVO₄ nanowires. The increased energy of photo-carriers and the enhanced surface absorption to polar molecules, which are CO in this case, were also play important roles in improving the photocatalytic activity of the photocatalyst and product selectivity. This work proposed an effective strategy to improve photo-carriers separation/transfer dynamics in the photocatalytic systems, which will also be a favorable reference for photovoltaic and photodetecting devices.

Selective Electrochemical Sensing Platform Based on the Synergy between Carbon Black and Single-Crystalline Bismuth Sulfide for Rapid Analysis of Antipyretic Drugs

Nanomaterials are of significant interest in acetaminophen (APAP) detection in pharmaceutical samples. Herein, a carbon black/single-crystalline rodlike bismuth sulfide (CB/Bi₂S₃) composite prepared by an ultrasonic method is reported and utilized for the rapid analysis of APAP. The highly oriented edge reactive sites of the CB/Bi₂S₃ composite promoted synergy and good electrochemical sensing performance with a fast electron transfer rate and low overpotential (0.35 V). Therefore, a CB/Bi₂S₃ composite-modified glassy carbon electrode (GCE) was applied to the selective determination of APAP by the voltammetric technique. The CB/Bi₂S₃ composite-modified electrode showed the lowest limit of detection of APAP (1.9 nM) with excellent sensitivity. The proposed CB/Bi₂S₃/GCE platform exhibited high selectivity, excellent stability (87.15%), and reproducibility. Also, the CB/Bi₂S₃/GCE sensor was then successfully used to analyze an APAP pharmaceutical sample and exhibited satisfactory outcomes. Therefore, the CB/Bi₂S₃-modified GCE sensor platform would be a low-cost and robust GCE electrode material for APAP detection.

Toward the Development of Disposable Electrodes Based on Holmium Orthovanadate/f-Boron Nitride: Impacts and Electrochemical Performances of Emerging Inorganic Contaminants

Rare-earth metal orthovanadates have great technological relevance in the family of rare-earth compounds owing to their excellent physical and chemical properties. A significant number of studies have been carried out on this class of compounds to exploit their electrochemical properties in virtue of variable oxidation states. But holmium vanadate (HoV) and its morphology selective synthesis have not been considered, which can have potential applications similar to the rest of the family. In this work, we propose the synthesis of superior architectures of HoV with a functionalized boron nitride (f-BN) nanocomposite. The synergistic effect between HoV and f-BN can have a positive effect on the physical characteristics of the nanocomposite, which can be explored for its electrochemical capacity. Here, HoV incorporated with f-BN is explored for the electrochemical detection of Hg²⁺ ions, which is known for its toxicity-induced environmental health hazards. The structural and compositional revelation reveals higher conductivity and faster electron transfer in the composite, which facilitates a wide working range (0.02-53.8 and 64.73-295.4 μM), low limit of detection (5 nM), higher sensitivity (66.6 μA μM^-1 cm^-2), good selectivity over 10-fold higher concentration of other interfering compounds compared to Hg²⁺ ion concentration, and good cycles stability (30 segments) toward Hg²⁺ ion detection. This also envisages the morphology selective synthesis and utilization of other rare-earth metals, whose electrochemical capacities are unexplored.

Influence of selenium precursors on the formation of iron selenide nanostructures (FeSe2): Efficient Electro-Fenton catalysts for detoxification of harmful organic dyestuffs

In this investigation, a sequences of iron diselenide (FeSe₂) nanomaterials as the competent and highly stable catalysts for the detoxification of aqueous organic dye pollutants such as Congo red (CR) and methylene blue (MB) through Electro-Fenton (EF) process using hydrogen peroxide as an initiator have been studied. The utilized selenium precursors include selenium metal, selenious acid (H₂SeO₃) and selenium dioxide (SeO₂) which were employed for the synthesis of FeSe₂ catalysts through a wet chemical strategy. It has been observed that based on the employed precursors, different morphologies ranges of the FeSe₂ catalysts were obtained: microgranualr particles to nano-stick to nanoflakes. The crystalline nature and phase purity of the obtained FeSe₂ catalysts were determined through XRD, Raman and HR-TEM analyses which confirmed their orthorhombic ferroselite structure. Among the prepared FeSe₂ catalysts, FS-2 (using H₂SeO₃) displayed better porous properties as compared to other catalysts and achieved the highest surface area of 74.68 m²g^-1. The narrow bandgap (0.88 eV) and fast conversion of Fe²⁺/Fe³⁺ cycle of FeSe₂ led CR and MB degradation of 93.3% and 90.4%, respectively. The outcome of this study demonstrates improved catalytic properties of FeSe₂ nanostructures for the efficient detoxification of hazardous and toxic effluents.

Enhanced the photoelectrochemical performance of Bi2XO6 (X = W, Mo) for detecting hexavalent chromium by modification of CuS

In this work, Bi₂XO₆ (X = W, Mo) are synthesized at different temperatures. The results of tests find the optimal temperatures of Bi₂WO₆ and Bi₂MoO₆ are 180 and 160°C (BW-180, BM-160). Then, BW-180 and BM-160 are further compounded with different contents of CuS. The results of photoelectrochemical (PEC) tests show that CuS can improve the PEC performance of semiconductor materials, and it has better performance when CuS mass fraction is 5%. These maybe the photoelectron potentials generated by CuS/Bi₂XO₆ (X = Mo, W) heterojunction reduce the combination of photogenerated electrons and holes. When the PEC sensor based on 5%-CuS/BW-180 detects Cr(VI), it has a linear range of 1-80 μmol/L with detection limit of 0.95 μmol/L, while the PEC sensor based on 5%-CuS/BM-160 detects Cr(VI) has a linear range of 0.5-230 μmol/L and a detection limit of 0.12 μmol/L. Thus, 5%-CuS/Bi₂XO₆ has potential application in hexavalent chromium detection.

Colorimetric detection of chromium (VI) ion using poly(N-phenylglycine) nanoparticles acting as a peroxidase mimetic catalyst

This paper reports on enzyme-like catalytic properties of polyethylene glycol-functionalized poly(N-phenylglycine) (PNPG-PEG) nanoparticles, which have not been explored to date. The developed nanoparticles have the ability to display great inherent peroxidase-like activity at very low concentrations, and are able to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) substrate in presence of hydrogen peroxide (H₂O₂). The oxidized product of TMB has a deep blue color with a maximum absorbance at ~655 nm. The PNPG-PEG nanoparticles exhibit K_m values of 0.2828 for TMB and 0.0799 for H₂O₂, indicating that TMB oxidation takes place at lower concentration of H₂O₂ in comparison to other nanozymes. Based on the known mechanism of H₂O₂ oxidation by hexavalent chromium [Cr(VI)] ions to generate hydroxyl radicals (^•OH), these nanoparticles were successfully applied for the colorimetric sensing of Cr(VI) ions. The sensor achieved good performance for Cr(VI) sensing with detection limits of 0.012 μM (0.01-0.1 μM linear range) and 0.52 μM (0.05-12.5 μM linear range). The detection scheme was highly selective, and successfully applied for the detection of Cr(VI) in real water samples.

Recent Advances in Electrochemical Monitoring of Chromium

The extensive use of chromium by several industries conducts to the discharge of an immense quantity of its various forms in the environment which affects drastically the ecological and biological lives especially in the case of hexavalent chromium. Electrochemical sensors and biosensors are useful devices for chromium determination. In the last five years, several sensors based on the modification of electrode surface by different nanomaterials (fluorine tin oxide, titanium dioxide, carbon nanomaterials, metallic nanoparticles and nanocomposite) and biosensors with different biorecognition elements (microbial fuel cell, bacteria, enzyme, DNA) were employed for chromium monitoring. Herein, recent advances related to the use of electrochemical approaches for measurement of trivalent and hexavalent chromium from 2015 to 2020 are reported. A discussion of both chromium species detections and speciation studies is provided.

Deep Eutectic Solvent-Assisted Synthesis of Ternary Heterojunctions for the Oxygen Evolution Reaction and Photocatalysis

Hierarchical nano-/microstructured photocatalysts have drawn attention for enhanced photocatalytic performance. Deep eutectic solvents (DESs) have been used as a green sustainable media to act as both solvent and structure-inducing agent in the synthesis of hierarchical nanomaterials. In this work, the DESs-assisted synthesis of flower-structured BiOCl/BiVO₄ (BOC/BVO) with g-C₃ N₄ (BOC/BVO/g-CN) ternary heterojunctions was achieved by using a simple wet-chemical method, providing good acidic and alkaline oxygen evolution reaction (OER) catalysts. BOC/BVO/g-CN-15 achieved an enhanced photocatalytic activity for OER with an overpotential of 570 mV in 1 m H₂ SO₄ and 220 mV in 1 m KOH electrolyte at a current density of 10 mA cm^-2 with excellent stability and extraordinary durability of the catalyst. The ternary heterojunctions displayed extended lifetimes for photogenerated charges and enhanced the separation efficiency of photogenerated electron-hole pairs, which is helpful to enhance the photocatalytic OER. Furthermore, the photocatalytic performance of the ternary heterojunctions in aqueous solution was demonstrated through photocatalytic dye degradation of methyl orange (MO) as a model pollutant, resulting in 95 % degradation of 20 ppm of MO in 210 min under the irradiation of a 35 W Xe arc lamp. This work not only provides new insight into the design of catalysts by using green solvents but also into the design of highly efficient metal-free OER photocatalysts for applications in acidic and alkaline media.

Phytosynthesis of BiVO4 nanorods using Hyphaene thebaica for diverse biomedical applications

Biosynthesis of bismuth vanadate (BiVO₄) nanorods was performed using dried fruit extracts of Hyphaene thebaica as a cost effective reducing and stabilizing agent. XRD, DRS, FTIR, zeta potential, Raman, HR-SEM, HR-TEM, EDS and SAED were used to study the main physical properties while the biological properties were established by performing diverse assays. The zeta potential is reported as − 5.21 mV. FTIR indicated Bi–O and V–O vibrations at 640 cm⁻¹ and 700 cm⁻¹/1120 cm⁻¹. Characteristic Raman modes were observed at 166 cm⁻¹, 325 cm⁻¹ and 787 cm⁻¹. High resolution scanning and transmission electron micrographs revealed a rod like morphology of the BiVO₄. Bacillus subtilis, Klebsiella pneumonia, Fusarium solani indicated highest susceptibility to the different doses of BiVO₄ nanorods. Significant protein kinase inhibition is reported for BiVO₄ nanorods which suggests their potential anticancer properties. The nanorods revealed good DPPH free radical scavenging potential (48%) at 400 µg/mL while total antioxidant capacity of 59.8 µg AAE/mg was revealed at 400 µg/mL. No antiviral activity is reported on sabin like polio virus. Overall excellent biological properties are reported. We have shown that green synthesis can replace well established processes for synthesizing BiVO₄ nanorods.

Development of an electrochemical sensor based on a functionalized carbon black/tungsten carbide hybrid composite for the detection of furazolidone

In this study, the simple sonochemical synthesis of functionalized carbon black (f-CB) anchored with tungsten carbide (WC) is used to prepare a novel electrocatalyst for the electrochemical detection of furazolidone (FU) by modifying screen-printed carbon electrodes (SPCE).

Photocatalytic 4-nitrophenol degradation and oxygen evolution reaction in CuO/g-C3N4 composites prepared by deep eutectic solvent-assisted chlorine doping

Heterostructured Cl-CuO/g-C₃N₄ composite for OER and photocatalytic 4-nitrophenol degradation.