Efficient electrochemical degradation of tetrabromobisphenol A using MnO2/MWCNT composites modified Ni foam as cathode: Kinetic analysis, mechanism and degradation pathway

Enhanced removal of tetrabromobisphenolA (TBBPA) from e-waste by Fe-S nanoparticles and Fe-S/CuS nanocomposite with response surface methodology (RSM)

TetrabromobisphenolA is a well-known member of the brominated flame retardant group and is widely used as a highly effective fire-retardant additive in electronic and electrical equipment. TBBPA is commonly found in various environmental sources and can be harmful to human health. This study presents a simple approach to preparing a magnetic nanocomposite, offering a straightforward method that results in consistent quality and low resource consumption. The nanocomposite has a high surface-to-volume ratio for the removal of tetrabromobisphenolA. Various characterization techniques, including XRD, FTIR, EDX, FESEM, VSM, TEM, and BET analyses were used to characterize the Fe-S nanoparticles and Fe-S/CuS. The results showed that Fe-S/CuS nanocomposite successfully removed over 97% of the initial TBBPA (15 mg L-1) under optimized conditions determined by RSM, such as a contact time of 15 min, pH of 7, Fe-S/CuS nanocomposite dosage of 0.69 g L-1, and salt concentration of 0.10%. The RSM analysis provided a second-order polynomial model with a confidence level of 93% (F = 29.58; p < 0.0001) to predict the TBBPA removal efficiency at various concentrations. In the adsorption kinetic studies, the second-order kinetic model provided the best fit for the experimental data. Additionally, Fe-S/CuS nanocomposite shows great potential for practical applications and environmental remediation efforts, making it a valuable asset for real-sample use in environmental settings.

Bimetal-oxide (Fe/Co) modified bagasse-waste carbon coated on lead oxide-battery electrode for metronidazole removal

Current study covers the preparation and application of a commercial modified lead oxide battery electrode (LBE) in electrochemical oxidation (ECO) of metronidazole (MNZ) in an aqueous phase. Modified electrode is prepared by doping of bimetal-oxide (Fe and Zn) nanoparticles (NPs) & single metal-oxide (Fe/Zn) on bagasse-waste carbon (bwc) which is further coated on LBE. The modified LBE electrode surface was examined for metal-oxide NPs through X-ray diffraction analysis (XRD). Different electrodes are prepared by varying combinations of two metal-oxide based on molar ratio and tested for electrochemical characterization and MNZ removal test. Based on large oxygen evolution potential in a linear sweep volumetry (LSV) analysis and high MNZ removal rate, the best electrode has been represented as Fe1:Co2-bwc/LBE which contains Fe & Co molar ratio of 1:2. Moreover, equilibrium attained at faster rate in degradation process of MNZ, where pseudo first order kinetics of 2.29 × 10-2 min-1 was obtained under optimized condition of (MNZ:100 mg/L, pH:7, CD: 30 mA/cm2 and electrolyte: 0.05 M Na2SO4). Maximum MNZ removal, total organic carbon removal (TOC), mineralization current efficiency (MCE) & energy consumption (EC) of 98.7%, 85.3%, 62.2% & 96.143 kW h/kg-TOC removed are found in 180 min of treatment time for Fe1:Co2-bwc/LBE electrode. Accelerated service life test confirms that the stability of modified electrode is enhanced by 1.5 times compared to pristine LBE. Repeatability test confirms that modified LBE (Fe1:Co2-bwc/LBE) can be utilized up to 3 times.

An efficient electrochemical degradation of toxic pollutants in wastewater using BiOBr/BiVO4 hierarchical structured electrode material

The electrochemical degradation of alizarin red dye was studied using bismuth oxyhalide attached to bismuth vanadate nanocomposite synthesized via a simple solvothermal method. The electrochemical degradation of alizarin red dye was treated at current densities of 3 and 5 mA cm-1 for 30 min under different supporting electrolyte mediums (NaCl and KCl). Also, the electrochemical degradation of BiOBr/BiVO4 electrode shows higher degradation percentages of 97 and 99 for NaCl and KCl electrolyte solutions, which are higher degradation percentages than pure BiVO4 electrode (88 and 91 for NaCl and KCl). Also, the BiOBr/BiVO4 electrode shows 100% COD reduction during the 30th min of alizarin red dye using both NaCl and KCl electrolyte solutions. This may indicate that the prepared BiOBr/BiVO4 electrode shows an efficient electrode material for the degradation of textile dyes.

Preparation of a Molecularly Imprinted Silica Nanoparticles Embedded Microfiltration Membrane for Selective Separation of Tetrabromobisphenol A from Water

The ubiquitous presence of tetrabromobisphenol A (TBBPA) in aquatic environments has caused severe environmental and public health concerns; it is therefore of great significance to develop effective techniques to remove this compound from contaminated waters. Herein, a TBBPA imprinted membrane was successfully fabricated via incorporating imprinted silica nanoparticles (SiO₂ NPs). The TBBPA imprinted layer was synthesized on the 3-(methacryloyloxy) propyltrimethoxysilane (KH-570) modified SiO₂ NPs via surface imprinting. Eluted TBBPA molecularly imprinted nanoparticles (E-TBBPA-MINs) were incorporated onto a polyvinylidene difluoride (PVDF) microfiltration membrane via vacuum-assisted filtration. The obtained E-TBBPA-MINs embedded membrane (E-TBBPA-MIM) showed appreciable permeation selectivity toward the structurally analogous to TBBPA (i.e., 6.74, 5.24 and 6.31 of the permselectivity factors for p-tert-butylphenol (BP), bisphenol A (BPA) and 4,4'-dihydroxybiphenyl (DDBP), respectively), far superior to the non-imprinted membrane (i.e., 1.47, 1.17 and 1.56 for BP, BPA and DDBP, respectively). The permselectivity mechanism of E-TBBPA-MIM could be attributed to the specific chemical adsorption and spatial complementation of TBBPA molecules by the imprinted cavities. The resulting E-TBBPA-MIM exhibited good stability after five adsorption/desorption cycles. The findings of this study validated the feasibility of developing nanoparticles embedded molecularly imprinted membrane for efficient separation and removal of TBBPA from water.

Highly applicable dual-cathode electro-Fenton system with self-adjusting pH and ferrous species

Due to the high dependence on the pH of influent water and the level of ferrous species, the applicability of the electro-Fenton (EF) system is poor. A highly applicable dual-cathode (DC) EF system with self-adjusting pH and ferrous species is proposed: gas diffusion electrode (GDE) for generation H₂O₂ and Fe/S doped multi-walled carbon nanotubes (Fe/S-MWCNT) modification active cathode (AC) for adjusting pH and iron species. The strong synergistic enhancement effect between two cathodes (synergy factor up to 90.3%) improves the catalytic activity of this composite system about 12.4 times higher than that of cathode alone. Impressively, AC has the ability of self-regulate to shift towards the optimal Fenton pH (around 3.0) without adding reagents. Even pH can be adjusted from 9.0 to 3.4 within 60 min. This characteristic gives the system a wide range of pH applications, while avoiding the disadvantage of the high cost of traditional EF in pre-acidification. Furthermore, DC has a high and stable ferrous species supply, and the iron leaching amount is about twice less than that of heterogeneous EF system. Long-term stability of the DC system and its easy activity regeneration exhibit the potential of environmental remediation in industrial application.

A review of advanced oxidation process towards organic pollutants and its potential application in fracturing flowback fluid

Fracturing flowback fluid (FFF) including various kinds of organic pollutants that do harms to people and new treatments are urgently needed. Advanced oxidation processes (AOPs) are suitable methods in consideration with molecular weight, removal cost and efficiency. Here, we summarize the recent studies about AOP treatments towards organic pollutants and discuss the application prospects in treatment of FFF. Immobilization and loading methods of catalysts, evaluation method of degradation of FFF, and continuous treatment process flow are discussed in this review. In conclusion, further studies are urgently needed in aspects of catalyst loading methods, macromolecule organic evaluation methods, industrial process, and pathways of macromolecule organics' decomposition.

Catalytic degradation of brominated flame retardants in the environment: New techniques and research highlights

Due to the extensive commercial use of brominated flame retardants (BFRs), human beings are chronically exposed to BFRs, causing great harms to human health, which imposes urgent demands to degrade them in the environment. Among various degradation techniques, catalytic degradation has been proven to be outstanding because of its rapidness and effectiveness. Therefore, much attention has been given to catalytic degradation, especially the extensively studied photocatalytic degradation and nanocatalytic reduction techniques. Recently, some novel advanced catalytic techniques have been developed and show excellent catalytic degradation efficiency for BFRs, including natural substances catalytic degradation, new Fenton catalytic degradation, new chemical reagent catalytic degradation, new material catalytic degradation, electrocatalytic degradation, plasma catalytic degradation, and composite catalytic degradation systems. In addition to the common features of traditional catalytic techniques, these novel techniques possess their own specific advantages in various aspects. Therefore, this review summarized the degradation mechanism of BFRs by the above new catalytic degradation methods under the laboratory conditions, simulated real environment, and real environment conditions, and further evaluated their advantages and disadvantages, aiming to provide some research ideas for the catalytic degradation of BFRs in the environment in the future. We suggested that more attention should focus on features of novel catalytic techniques, including eco-friendliness, cost-effectiveness, and pragmatic usefulness.

Electrochemical Reduction and Oxidation of Chlorinated Aromatic Compounds Enhanced by the Fe-ZSM-5 Catalyst: Kinetics and Mechanisms

Devising cost-effective electrochemical catalyst system for the efficient degradation of chlorinated aromatic compounds is urgently needed for environmental pollution control. Herein, a Fe-ZSM-5 zeolite was used as a suspended catalyst to facilitate the degradation of lindane as a model chlorinated pesticide in an electrochemical system consisting of the commercial DSA (Ti/RuO₂-IrO₂) anode and graphite cathode. It was found that the Fe-ZSM-5 zeolite greatly accelerated the degradation of lindane, with the degradation rate constant more than 8 times higher than that without Fe-ZSM-5. In addition, the Fe-ZSM-5 zeolite widened the working pH range from 3 to 11, while efficient degradation of lindane in the absence of Fe-ZSM-5 was only obtained at pH ≤ 5. The degradation of lindane was primarily due to reductive dechlorination mediated by atomic H* followed by ^•OH oxidation. Fe-ZSM-5 zeolite could enrich lindane, H*, and ^•OH on its surface, thus provided a suitable local environment for lindane degradation. The Fe-ZSM-5 zeolite exhibited high stability and reusability, and reduced the energy consumption. This research provides a potential reduction-oxidation strategy for removing organochlorine compounds through a cost-efficient Fe-ZSM-5 catalytic electrochemical system.

Nano Pd doped Ni foam electrode stimulated electrochemical reduction of tetrabromobisphenol A: Optimization strategies and function mechanism

Tetrabromobisphenol A (TBBPA), a hazardous and persistent flame retardant, has been widely detected in the natural aquatic system. The acceleration of reductive debromination (rate-limiting process) is vital during the decomposition and detoxification of TBBPA. This study achieved superior TBBPA electrochemical reductive debromination performance by nano Pd doped Ni foam electrode (4.8 times higher than Ni foam electrode). The optimal TBBPA reductive debromination performance was obtained under -1.2 V of cathode potential, 1.2 wt% of Pd loading, 10 mg L^-1 of TBBPA and 100 mM of Na₂SO₄ as the electrolyte solution. UPLC-QTOF-MS verified that Br atoms in TBBPA were removed sequentially to form bisphenol A as the major product. Most TBBPA was reductively debrominated by atomic H* through indirect hydrodebromination, evidenced by the atomic H* quenching test. The higher solution conductivity and appropriate TBBPA concentration would contribute to the debromination efficiency. Excessive H₂ generation whether by over negative potential or H atom richness electrolyte largely disturbed the reaction process and restricted the debromination. The improved generation of reductant (H*)_adsPd was the most significant, while excessive Pd loading would make aggregation and limit the debromination efficiency. The study confirmed the optimization strategies of conditions for Pd/Ni foam electrode and revealed the related function mechanism for stimulating TBBPA electrochemical reduction, giving suggestions for the efficient removal of TBBPA in the aquatic environment.

Simultaneous Fractionation, Desalination, and Dye Removal of Dye/Salt Mixtures by Carbon Cloth-Modified Flow-electrode Capacitive Deionization

The critical challenges of using electromembrane processes [e.g., electrodialysis and flow-electrode capacitive deionization (FCDI)] to recycle resources (e.g., water, salts, and organic compounds) from wastewater are the fractionation of dissolved ionic matter, the removal/recovery of organic components during desalination, and membrane antifouling. This study realized the simultaneous fractionation, desalination, and dye removal/recovery (FDR) treatment of dye/salt mixtures through a simple but effective approach, that is, using a carbon cloth-modified FCDI (CC-FCDI) unit, in which the carbon cloth layer was attached to the surface of each ion-exchange membrane (IEM). The IEMs and carbon-based flow-electrodes were responsible for the fractionation and desalination of dye and salt ions, while the carbon cloth layers contributed to the active membrane antifouling and dye removal/recovery by the electrosorption mechanism. Attributed to such features, the CC-FCDI unit accomplished the effective FDR treatment of dye/salt mixtures with wide ranges of salt and dye concentrations (5-20 g L^-1 NaCl and 200-800 ppm methylene blue) and different dye components (cationic and anionic dyes) under various applied voltages (1.2-3.2 V). Moreover, the active membrane antifouling by virtue of the carbon cloth facilitated the excellent and sustainable FDR performance of CC-FCDI. The removal/recovery of dyes from the carbon cloth strongly depends on the characteristics of dye molecules, the surface properties of the carbon cloth, and the local pH at the IEM/CC interfaces. This study sheds light on the strategies of using multifunctional layer-modified FCDI units to reclaim resources from various high-salinity organic wastewater.

Advancing interfacial properties of carbon cloth via anodic-induced self-assembly of MOFs film integrated with α-MnO2: A sustainable electrocatalyst sensing acetylcholine

The metal organic frameworks (MOFs) with tunable composition, modified structure, and morphologically controlled nanoarchitectures are quite imperative to improve the electrochemical (EC) performances of sensing platforms. Herein, EC control over the fabrication of HKUST-1 (Cu-MOFs) nanocrystals is achieved via anodic-induced electrodeposition approach following the mixing of Cu²⁺ salt precursor in the vicinity of benzene-1,3,5-tricarboxylate (BTC^3-) ligands. The problem of controlled mass transfer and slow dispersal of MOFs is resolved by EC deposition of pyramidal-octagonal MOFs on a highly conductive and flexible carbon substrate (activated carbon cloth, ACC) wrapped with rGO layers (ACC-rGO@Cu(BTC). Further, α-MnO₂ is integrated on ACC-rGO@Cu(BTC) to achieve the synergistic effect of ternary structure interfaces. The novel ACC-rGO@Cu(BTC)@MnO₂ based flexible electrode exhibits striking EC performance toward non-enzymatic sensing of acetylcholine (ACh) including wide linear range (0.1 µM - 3 mM), lowest detection limit (5 nM, S/N = 3), high selectivity, and long-term stability. Moreover, the developed sensing system has been applied for real-time detection of ACh efflux released from three different cell lines and biological matrices. Our work unlocks a new prospect of precisely structured MOFs with extensive functionalities and scaled-up fabrication methods via selection of nanoscale reaction centers to develop flexible sensing devices.

A novel modified Fe-Mn binary oxide graphite felt (FMBO-GF) cathode in a neutral electro-Fenton system for ciprofloxacin degradation

A graphite felt (GF) cathode was firstly modified by Fe-Mn binary oxide (FMBO), active carbon (AC), carbon black (CB), and polytetrafluoroethylene (PTFE), which exhibits satisfactory ciprofloxacin (CIP) removal efficiency at neutral pH value in electro-Fenton (EF) system. Morphological data showed that modified cathodes have larger surface area and volume pore as well as more active sites. And electrochemical properties have proved stronger current response after modification. In compassion to the unmodified GF, the FMBO/AC/CB modified GF (FMBO-GF) has wider pH range and higher CIP removal efficiency due to its unique nanoparticles structure. The CIP removal efficiency achieved 95.40% in 30 min, and the removal efficiency of total organic carbon (TOC) achieved 93.77% in 2 h when conditions were optimal (25 mg/L initial CIP concentration, 2 mA/cm² current density, FMBO/AC: CB: PTFE of 1:1:5, and 7 initial pH value) in this study. The results of great degradation and mineralization of CIP in this study indicate that the FMBO-GF cathode has huge potential on antibiotics removals in neutral environment.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

Simultaneous fluorescence determination of bisphenol A and its halogenated analogs based on a molecularly imprinted paper-based analytical device and a segment detection strategy

Bisphenol A (BPA) and its halogenated analogs tetrabromobisphenol A (TBBPA) and tetrachlorobisphenol A (TCBPA) are common environmental contaminants and a method for their simultaneous determination is urgently needed. A paper-based analytical device (PAD) was prepared using a metal-organic framework of UiO-66-NH₂ coated with molecularly imprinted polymers (MIPs) using TBBPA as a template. The maximum adsorption capacity was 120.94 mg g^-1 and the imprinting factor was 4.07. The selective recognition ability of this PAD enabled the effective separation of TBBPA, TCBPA and BPA based on paper chromatography. Subsequently, the PAD cut into segments were used individually to determine the presence of target chemicals using a highly sensitive fluorescent method. Under ultraviolet light irradiation, UiO-66-NH₂ acts as a photocatalyst to produce reactive oxygen species (ROS) that degrade TBBPA, TCBPA or BPA in the imprinted cavities and the fluorescent signal of 2',7'-dichlorodihydrofluorescein diacetate (H₂DCFDA) added as a ROS probe enabled the indirect determination of target chemicals. This method could determine BPA and its halogenated analogs in dust samples simultaneously with detection limits ranging from 0.14 to 0.30 ng g^-1. The intraday relative standard deviation (RSD) was ≤6.8% and interday RSD was ≤8.1%. The recoveries ranged from 91.0 to 105.6% with RSD values that were ≤7.5%. The results stemmed from this method were consistent with those obtained from LC-MS/MS. It is an environmentally-friendly approach due to the degradation of target pollutants and possesses many advantages such as high selectivity, low cost and easy-to-fabrication.

Oxygen reduction reaction electrocatalysis inducing Fenton-like processes with enhanced electrocatalytic performance based on mesoporous ZnO/CuO cathodes: Treatment of organic wastewater and catalytic principle

To treat typical organic wastewater efficiently, a novel Fenton-like processes based on ZnO/CuO composite cathode induced by oxygen reduction reaction (ORR) electrocatalysis with enhanced electrocatalytic performance was established successfully. Electrochemical testing investigation indicated that the ZnO/CuO cathode possessed conspicuous redox peak and better conductivity than uncompounded electrodes. Additionally, the removal efficiency of methylene blue and its chemical oxygen demand (COD) reached 96.4% and 70.8% after 120 min, respectively. Next, the feasibility of the material in practical application was also discussed. Subsequently, electrocatalytic principle based on valence state changes of metal elements on the electrode surface were also studied by x-ray photoelectron spectroscopy (XPS). Redox reactions between the active species H₂O₂ and the species Cu⁺ promoting Fenton-like processes were deduced. Namely, the conversion of Cu(I) and Cu(II) on the electrode surface was accompanied by OH generation. The combination of ZnO and CuO improved the surface morphology, increasing the active site of ORR and the yield of H₂O₂, thus greatly enhanced the Fenton-like activity. Finally, the main intermediates were identified by Gas chromatography-mass spectrometer (GC-MS), and possible pathways for dye degradation were proposed. In short, the research of ZnO/CuO cathode provided great significance for heterogeneous Fenton-like degradation and also showed its application potential in water treatment and remediation.