Palladium nanoparticles decorated on amine functionalized graphene nanosheets as excellent nanocatalyst for the hydrogenation of nitrophenols to aminophenol counterparts

Electron transfer enhanced catalytic activity of nitrogen doped reduced graphene oxide supported CuCo2O4 towards the fast reduction of 4-nitrophenol in water

There has been a growing interest in the design and development of graphene based composite materials with superior performances for environmental catalytic applications. But in most of the studies the synthesis conditions require elevated temperatures and expensive working setups (high temperature furnaces, autoclaves, inert atmosphere conditions etc.). In this reported work, the nitrogen doped reduced graphene oxide supported CuCo2O4 (NG/CuCo2O4) composites were prepared through a simple one pot synthesis method under mild conditions (∼95 °C and air atmosphere) and successfully employed as catalysts for the reduction of toxic 4-nitrophenol (4NP). The characterization results revealed the successful formation of NG/CuCo2O4 composites with a possible charge transfer interaction between nitrogen doped reduced graphene oxide support of CuCo2O4. The NG/CuCo2O4 hybrids exhibited robust catalytic activity in 4NP reduction with an activity factor of 261.5 min-1 g-1. A 4NP conversion percentage which is as high as 99.5% was achieved within 11 min using the NG/CuCo2O4 catalyst. The detailed kinetic analysis confirmed the Langmuir-Hinshelwood model for the NG/CuCo2O4 catalysed 4NP reduction. The nitrogen doped reduced graphene oxide support modified the electronic levels of CuCo2O4 nanoparticles through electron transfer interactions and enhanced the catalytic activity of CuCo2O4 in NG/CuCo2O4 through improved adsorption of reactant ions and effective generation of active hydrogen species. The good reusability and stability along with profound activity of NG/CuCo2O4 catalyst makes it a promising material for wide scale catalytic applications.

A visualization method for quickly detecting nitrite ions in breath condensate using a portable closed bipolar electrochemical sensor

A portable and non-invasive sensor presents an innovative way to measure inflammation biomarkers in exhaled breath condensate (EBC). This research is focused on developing a miniaturized bipolar electrochemical sensor that can be connected to a smartphone app. This device will be able to detect adding known amounts of nitrite (spikes) to a salt solution and small amounts of nitrite ions in collected real samples in EBC. The sensor was fabricated and tested for its rapid electron transfer capability and ability to detect nitrite ions even at very low concentrations and low real sample levels. In the proposed setup, when the required potential was applied by using a direct power supply, the nitrite ions were oxidized electrocatalytically at amine-functionalized graphene oxide (AGO) decorated with gold nanoparticles on a carbon paper anodic pole. On the other hand, the reduction reaction of Prussian blue occurred at the cathodic pole of the bipolar electrode simultaneously. This strategy led to a change in color from blue to white as a result of the reduction process and the color change is proportional to the concentration of nitrite ions in the analytical solution. The combination of smartphones with the colorimetric method has resulted in a platform for the detection of test strips that is more visual and convenient. The amperometry and voltammetric methods of nitrite detection showed a linear range of up to 1230 μM. The bipolar electrochemical sensor was able to detect the clinically relevant range of nitrite from 0.5 to 85 μM in a buffer with an ultralow detection limit (LOD) of 250 nM (S/N = 3), fast response and excellent selectivity. It was benchmarked by utilizing pre-characterized real EBC samples to differentiate patients with respiratory diseases from healthy volunteers. By tracking the results of nitrite measurements over time, it has become possible to detect trends and changes in an individual's nitrite ion concentration and to potentially identify lung inflammation earlier.

Synthesis and characterization of Pd0 nanoparticles supported over hydroxyapatite nanospheres for potential application as a promising catalyst for nitrophenol reduction

Nitrophenols, which are defined as an important toxic and carcinogenic pollutant in agricultural and industrial wastewater due to their solubility in water, form of resistance against all organisms in water resources. It is vital that these compounds, which are highly toxic as well as highly explosive, are removed from the aquatic ecosystem. In this paper, we reported the preparation and advanced characterization of Pd0 nanoparticles supported over hydroxyapatite nanospheres (Pd0@nano-HAp). The catalytic efficiency of the Pd0@nano-HAp catalyst was examined in the reduction of nitrophenols in water in the presence of NaBH4 as reducing agent and the great activity of catalyst have been specified against 2-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol and 2,4,6-trinitrophenol compounds with 70.6, 82.4, 27.6 and 41.4 min-1 TOFinitial values, respectively. Another important point is that the Pd0@nano-HAp catalyst has perfect reusability performance (at 5th reuse between 68.5 and 92.8 %) for the reduction of nitrophenols. In addition, catalytic studies were carried out at different temperatures in order to determine thermodynamic parameters such as Ea, ΔH≠ and ΔS≠.

Probing the Activity Enhancement of Carbocatalyst with the Anchoring of Atomic Metal

Enhanced catalysis for organic transformation is essential for the synthesis of high-value compounds. Atomic metal species recently emerged as highly effective catalysts for organic reactions with high activity and metal utilization. However, developing efficient atomic catalysts is always an attractive and challenging topic in the modern chemical industry. In this work, we report the preparation and activity enhancement of nitrogen- and sulfur-codoped holey graphene (NSHG) with the anchoring of atomic metal Pd. When employed as the catalyst for nitroarenes reduction reactions, the resultant Pd/NSHG composite exhibits remarkably high catalytic activity due to the co-existence of dual-active components (i.e., catalytically active NSHG support and homogeneous dispersion of atomic metal Pd). In the catalytic 4-nitrophenol (4-NP) reduction reaction, the efficiency (turnover frequency) is 3.99 × 10-2 mmol 4-NP/(mg cat.·min), which is better than that of metal-free nitrogen-doped holey graphene (NHG) (2.3 × 10-3 mmol 4-NP/(mg cat.·min)) and NSHG carbocatalyst (3.8 × 10-3 mmol 4-NP/(mg cat.·min)), the conventional Pd/C and other reported metal-based catalysts. This work provides a rational design strategy for the atomic metal catalysts loaded on active doped graphene support. The resultant Pd/NSHG dual-active component catalyst (DACC) is also anticipated to bring great application potentials for a broad range of organic fields, such as organic synthesis, environment treatment, energy storage and conversion.

Incorporation of g-C3N4 nanosheets and CuO nanoparticles on polyester fabric for the dip-catalytic reduction of 4 nitrophenol

In the present work, we present the preparation of a new emerged heterogeneous catalyst (PE/g-C3N4/CuO) by in situ deposition of copper oxide nanoparticles (CuO) over the graphitic carbon nitride (g-C3N4) as the active catalyst and polyester (PE) fabric as the inert support. The synthesized sample (PE/g-C3N4/CuO) "dip catalyst" was studied by using various analytical techniques (Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy and dispersive X-ray spectroscopy (SEM/EDX), and transmission electron microscopy (TEM). The nanocomposite is utilized as heterogeneous catalysts for the 4-nitrophenol reduction in the presence of NaBH4, in aqueous solutions. According to experimental results, PE/g-C3N4/CuO with a surface of 6 cm2 (3 cm × 2 cm) demonstrated the catalyst exhibit excellent catalytic activity with 95% reduction efficiency for only 4 min of reaction and an apparent reaction rate constant (Kapp) of 0.8027 min-1. Further evidence that this catalyst based on prepared PE support can be a good contender for long-lasting chemical catalysis comes from the remarkable stability after 10 repetitions reaction cycles without a noticeably loss in catalytic activity. The novelty of this work consists to fabricate of catalyst based of CuO nanoparticles stabilized with g-C3N4 on the surface of an inert substrate PE, which results in an heterogenous dip-catalyst that can be easily introduced and isolated from the reaction solution with good retention of high catalytic performance in the reduction of 4-nitrophenol.

Fabrication of glucose bioelectrochemical sensor based on Au@Pd core-shell supported by carboxylated graphene oxide

The study presents a novel electrochemical glucose biosensor based on glucose oxidase (GOx) immobilized on Au@Pd core-shell nanoparticles supported on carboxylated graphene oxide (cGO). The immobilization of GOx was achieved by cross-linking the chitosan biopolymer (CS) including Au@Pd/cGO and glutaraldehyde (GA) on a glassy carbon electrode. The analytical performance of GCE/Au@Pd/cGO-CS/GA/GOx was investigated using amperometry. The biosensor had fast response time (5.2 ± 0.9 s), a satisfactory linear determination range between 2.0 × 10^-5 and 4.2 × 10^-3 M, and limit of detection of 10.4 μM. The apparent Michaelis-Menten constant (K_app) was calculated as 3.04 mM. The fabricated biosensor also exhibited good repeatability, reproducibility, and storage stability. No interfering signals from dopamine, uric acid, ascorbic acid, paracetamol, folic acid, mannose, sucrose, and fructose were observed. The large electroactive surface area of carboxylated graphene oxide is a promising candidate for sensor preparation.

Effective remediation and decontamination of organophosphorus compounds using enzymes: From rational design to potential applications

Organophosphorus compounds (OPs) have been widely used in agriculture for decades because of their high insecticidal efficiency, which maintains and increases crop yields worldwide. More importantly, OPs, as typical chemical warfare agents, are a serious concern and significant danger for military and civilian personnel. The widespread use of OPs, superfluous and unreasonable use, has caused great harm to the environment and food chain. Developing efficient and environmentally friendly solutions for the decontamination of OPs is a long-term challenge. Microbial enzymes show potential application as natural and green biocatalysts. Thus, utilizing OP-degrading enzymes for environmental decontamination presents significant advantages, as these enzymes can rapidly hydrolyze OPs; are environmentally friendly, nonflammable, and noncorrosive; and can be discarded safely and easily. Here, the properties, structure and catalytic mechanism of various typical OP-degrading enzymes are reviewed. The methods and effects utilized to improve the expression level, catalytic performance and stability of OP-degrading enzymes were systematically summarized. In addition, the immobilization of OP-degrading enzymes was explicated emphatically, and the latest progress of cascade reactions based on immobilized enzymes was discussed. Finally, the latest applications of OP-degrading enzymes were summarized, including biosensors, nanozyme mimics and medical detoxification. This review provides guidance for the future development of OP-degrading enzymes and promotes their application in the field of environmental bioremediation and medicine.

Ni-Pd-Incorporated Fe3O4 Yolk-Shelled Nanospheres as Efficient Magnetically Recyclable Catalysts for Reduction of N-Containing Unsaturated Compounds

The use of metal-based heterogeneous catalysts for the degradation of N-containing organic dyes has attracted much attention due to their excellent treatment efficiency and capability. Here, we report the synthesis of heterometals (Ni and Pd)-incorporated Fe3O4 (Ni-Pd/Fe3O4) yolk-shelled nanospheres for the catalytic reduction of N-containing organic dyes using a facile combination of solvothermal treatment and high-temperature annealing steps. Benefiting from the magnetic properties and the yolk-shelled structure of the Fe3O4 support, as well as the uniformly dispersed active heterometals incorporated in the shell and yolk of spherical Fe3O4 nanoparticles, the as-prepared Ni-Pd/Fe3O4 composite shows excellent recyclability and enhanced catalytic activity for three N-containing organic dyes (e.g., 4-nitrophenol, Congo red, and methyl orange) compared with its mono metal counterparts (e.g., Ni/Fe3O4 and Pd/Fe3O4). In the 4-nitrophenol reduction reaction, the catalytic activity of Ni-Pd/Fe3O4 was superior to many Fe3O4-supported nanocatalysts reported within the last five years. This work provides an effective strategy to boost the activity of iron oxide-based catalytic materials via dual or even multiple heterometallic incorporation strategy and sheds new light on environmental catalysis.

Effective adsorption and catalytic reduction of nitrophenols by amino-rich Cu(I)-I coordination polymer

Nitrophenols are identified as the priority organic pollutants due to the chemical stability, water solubility, persistence, and toxicity to human health and the environment. Hence, removal of nitrophenols from waste water is vitally essential. In this study, amino-rich coordination polymer Cu₂I₂(MA)₂ (MA = melamine) has been applied for efficient adsorption and catalytic reduction of nitrophenols, like 4-nitrophenol (4-NP), 2, 4-dinitrophenol (DNP) and 2, 4, 6-trinitrophenol (TNP). The effect of various parameters like contact time, initial concentrations, pH, and temperature on adsorption were investigated. The adsorption of nitrophenols fitted the pseudo-second-order kinetic model and Langmuir isotherms model well. The maximum adsorption capacities were 285.71, 232.02, and 131.57 mg g^-1 for 4-NP, DNP, and TNP when initial concentrations were 50 mg L^-1 at 293.15 K, respectively. The adsorption of nitrophenols is a spontaneous, endothermic, and entropy-driven process. The reduction reaction followed the pseudo-first-order kinetics, and the kinetic rate constants were 0.4413, 0.3167, and 0.17538 min^-1 for 4-NP, DNP, and TNP, respectively. The effect of initial nitrophenols concentration, anions, and temperature on reduction process was investigated. The mechanism of adsorption and catalytic reduction of Cu₂I₂(MA)₂ was studied. The results demonstrated that Cu₂I₂(MA)₂ exhibits excellent adsorption and catalytic activity to remove nitrophenols.

Hierarchical-Structured Pd Nanoclusters Catalysts x-PdNCs/CoAl(O)/rGO-T by the Captopril-Capped Pd Cluster Precursor Method for the Highly Efficient 4-Nitrophenol Reduction

Water-soluble captopril-capped atomically precise Pd nanoclusters (Pd₁₇Capt₈ NCs: 1.3 ± 0.5 nm) produced by a simple chemical reduction were supported on preprepared hybrid Co₃Al-layered double hydroxide/reduced graphene oxide (Co₃Al-LDH/rGO) by a pH-adjusted electrostatic adsorption strategy followed by proper calcinations, giving a series of novel catalysts x-PdNCs/CoAl(O)/rGO-T (x (Pd loading) = 0.09, 0.17, 0.43 wt % (ICP), T = 230, 250, 280, 300, 320 °C). The characterization results show that the as-obtained catalysts possess the hierarchical nanosheet array morphology. Pd NCs with a size of ∼1.3 to 1.8 nm are highly distributed at the edge sites of the CoAl(O) nanosheets. All of the x-PdNCs/CoAl(O)/rGO-T catalysts show superior catalytic efficiency for the conversion of 4-nitrophenol to 4-aminophenol, particularly 0.17-PdNCs/CoAl(O)/rGO-300 possesses the highest performance with a turnover frequency (TOF) of 30 042 h^-1, which is the highest among the reported Pd-based catalysts so far. The superior activity of 0.17-PdNCs/CoAl(O)/rGO-300 can be owing to ultrafine Pd NCs with a clean surface, the strongest PdNCs-Co²⁺-OH(LDH)-rGO three-phase synergy, and the much improved adsorption of the substrate via π-π stacking upon nanosheet array morphology. Meanwhile, 0.17-PdNCs/CoAl(O)/rGO-300 exhibits excellent catalytic activities for various nitroarenes and anionic azo dyes as well as good reusability with the complete reduction of 4-nitrophenol (4-NP) within 90 s after 10 successive runs. The present work provides not only a simple and convenient strategy for the synthesis of clean, efficient, and environmentally friendly supported metal nanocluster catalysts but also a new idea for the efficient catalytic degradation of environmental pollutants.

Controllable Synthesis of Cobalt-Containing Nanosheet Array-Like Ternary CuCoAl-LDH/rGO Hybrids To Boost the Catalytic Efficiency for 4-Nitrophenol Reduction

A series of Co-doped ternary Cu_xCo_3-xAl-layered double hydroxide (LDH)/rGO nanosheet array hybrids (x = 0.5, 1.0, 1.5, and 2.0) were successfully prepared using the preconditioned pH value aqueous-phase coprecipitation strategy. The Cu_xCo_3-xAl-LDH/rGO hybrids are featured as hexagonal CuCoAl-LDH nanosheets in situ anchoring onto both sides of the rGO surface in an ab-plane vertically interlaced growth pattern. The Cu_xCo_3-xAl-LDH/rGO hybrids show excellent activity for the complete conversion of 4-nitrophenol to 4-aminophenol, especially Cu_1.5Co_1.5Al-LDH/rGO with the highest k_app value of 49.2 × 10^-3 s^-1 and TOF of 232.8 h^-1, clearly higher than most copper-containing samples in the literature and even some precious ones. Thermodynamic analysis was carried out, and the values of Ea, ΔH^#, ΔS^#, and ΔG^# were estimated. The best activity of Cu_1.5Co_1.5Al-LDH/rGO can be mainly ascribed to the in situ-formed ultrafine Cu₂O NPs (∼4.3 nm) along with a small amount of Cu⁰ species, the electron transfer effect induced by atomically dispersed Co²⁺ species leading to the formation of electron-rich Cu species along with the Co²⁺/Co³⁺ redox couple, the strong Cu₂O-CuCoAl-LDH-rGO synergy upon the nanosheet array morphology with a high surface area and pore volume, and enhanced adsorption of reactants upon π-π stacking via an rGO layer. Meanwhile, the Cu_1.5Co_1.5Al-LDH/rGO exhibits an excellent universality and good cycling stability for 10 continuous runs. The Cu_1.5Co_1.5Al-LDH/rGO also shows superior efficiency in the catalytic reduction of 4-NP solution with a high concentration (20 mM) and displays excellent reduction performance in the fixed-bed test, implying the potential applications of the current Co-doped hierarchical ternary Cu-based LDH/rGO hybrids in the continuous treatment of practical wastewater.

A hybrid nanobiocatalyst with in situ encapsulated enzyme and exsolved Co nanoclusters for complete chemoenzymatic conversion of methyl parathion to 4-aminophenol

Combination of enzymatic and chemical reactions provides tremendous possibilities for chemoenzymatic cascade processes. However, constructing efficient hybrid catalysts still faces great challenges. Herein, we develop a hybrid catalyst by in situ encapsulating organophosphorus hydrolase (OPH) into a Zn-doped Co-based ZIF (0.8CoZIF) via biomimetic mineralization for the chemoenzymatic cascade conversion of methyl parathion to 4-nitrophenol and then 4-aminophenol. The exsolved Co nanoclusters in Zn/Co-ZIF are found to catalyze 4-nitrophenol reduction into 4-aminophenol in the presence of sodium borohydride (NaBH₄). The as-synthesized OPH@0.8CoZIF catalyzes the complete conversion of 95 μM methyl parathion at nearly 100% 4-aminophenol production in the presence of 50 mM NaBH₄ within 15 min, which is 1/4 that of the physical mixture of OPH and 0.8CoZIF, benefiting from the MP accumulation and substrate channeling in the hybrid catalyst. The maximum cascade conversion rate of MP to 4-AP reaches 8.07 μmol·min^-1·g-catalyst^-1, which is higher than most of the reported chemoenzymatic cascade catalysts. Therefore, the hybrid nanocatalyst containing Co-ZIF-based catalyst and OPH is successfully fabricated and enables to catalyze the complete conversion of a toxic pollutant like methyl parathion into a non-toxic resource like 4-aminophenol for recycling in useful chemical synthesis through efficient one-pot cascade reactions.

Efficient Photocatalytic Degradation of Organic Dyes by AgNPs/TiO2/Ti3C2T x MXene Composites under UV and Solar Light

Due to their broad applications in various industrial activities, and their well-known negative impacts on the aquatic environment, organic dyes have been continuously identified as serious threat to the quality of ecosystems. The photocatalytic degradation process in aqueous solutions has emerged as an efficient and reliable approach for the removal of organic dyes. MXenes, a new class of two-dimensional (2D) nanomaterials, possess unique chemical composition, surface functionalities, and physicochemical properties. Such characteristics enable MXenes to act as efficient catalysts or cocatalysts to photodegrade organic molecules. This work explores the application of Ti₃C₂T _x MXene decorated with silver and palladium nanoparticles, using a simple hydrothermal treatment method, for the photocatalytic degradation of methylene blue (MB) and rhodamine B (RhB). The chemical composition of these photocatalysts, as well as their structural properties and morphology, was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques. The photocatalytic degradation abilities of the pristine MXene and the synthesized MXene composites were investigated under ultraviolet and solar light irradiation. A significant improvement in the photocatalytic performances was observed for all oxidized MXene composites when compared to pristine MXene, with a superior degradation efficiency achieved for AgNPs/TiO₂/Ti₃C₂T _x . This work broadens the application range of oxidized MXene composites, providing an alternative material for degrading organics dyes and wastewater treatment applications.

Smart hydrogel-microsphere embedded silver nanoparticle catalyst with high activity and selectivity for the reduction of 4-nitrophenol and azo dyes

A simple method is reported for the preparation of silver nanoparticle (AgNP) embedded pH-responsive hydrogel microparticle catalyst via Michael addition gelation and in-situ silver nitrate (AgNO₃) reduction. The AgNP-hydrogel microsphere exhibited an efficient reduction of pollutants like 4-Nitrophenol (4-NP) and Congo red (CR) under acidic medium with turn over frequency (TOF) of ~170 h^-1 and ~124 h^-1 respectively. Interestingly, the activity of the catalysts was turned-OFF under a basic medium (≥ pH 12) due to the deswelling pH-responsive matrix surrounding the AgNPs. On the contrary, turning-OFF the hydrogenation of a cationic pollutant like methylene blue (MB) using high pH (≥ 12) was not possible, due to ionic interaction of MB molecules with the negatively charged catalyst at this pH. This feature was used to demonstrate selective hydrogenation of only MB from a mixture of 4-NP and MB. Finally, five recycling steps confirmed the reusability and practical application potential of the catalyst.

Pd Anchored on a Phytic Acid/Thiourea Polymer as a Highly Active and Stable Catalyst for the Reduction of Nitroarene

A kind of N, P, C, O-containing polymer was easily prepared via microwave heating of phytic acid and thiourea just for 90 s. After impregnation and reduction of H₂PdCl₄, highly dispersed Pd single atoms/sub-nano clusters loaded on the phytic acid/thiourea polymer (Pd-CNSP) were successfully obtained. Owing to the synergetic effect of the polymer support and Pd, the catalyst Pd-CNSP achieves a great atomic efficiency of Pd species and exhibits an outstanding catalytic ability in the reduction of 4-nitrophenol. The k value of the catalyst Pd-CNSP (2.17 min^-1 mg^-1) is about 19 times higher than that of the commercial Pd/C (5 wt %) catalyst. The turnover frequency value is as high as 848 min^-1, which is the highest value reported so far. Pd-CNSP also has good selectivity for the reduction of halogen-substituted (Cl and Br) nitroaromatics. It is expected to be mass-produced and used in other industrial hydrogenation reactions.

Novel biochar and hydrochar for the adsorption of 2-nitrophenol from aqueous solutions: An approach using the PVSDM model

Two new adsorbents, namely avocado-based hydrochar and LDH/bone-based biochar, were developed, characterized, and applied for adsorbing 2-nitrophenol. The pore volume and surface diffusion model (PVSDM) was numerically solved for different geometries and applied to interpret the adsorption decay curves. Both adsorbents presented interesting textural and physicochemical characteristics, which achieved maximum adsorption capacities of 761 mg/g for biochar and 562 mg/g for hydrochar. The adsorption equilibrium data were well fitted by Henry isotherm. Besides, thermodynamic investigation revealed endothermic adsorption with the occurrence of electrostatic interactions. PVSDM predicted the adsorption decay curves for different adsorbent geometries at different initial concentrations of 2-nitrophenol. The surface diffusion was the main intraparticle mass transport mechanism. Furthermore, the external mass transfer and surface diffusion coefficients increased with the increase of 2-nitrophenol concentration.

Application of electroactive Au/aniline tetramer-graphene oxide composites as a highly efficient reusable catalyst

This study proposes a cost-effective, energy-saving, and green process that uses π-π interactions to modify graphene oxide (GO), and the conjugate structure of aniline tetramer (AT) to enhance the dispersion of GO. Au/aniline tetramer-graphene oxide (Au/ATGO) composites were synthesized and applied as a catalyst in this study. The adsorption of AT on GO, via π-π interaction, formed ATGO composites. Subsequently, the amine group on ATGO was stably anchored on Au nanoparticles (Au NPs) to form Au/ATGO composites. The Au/ATGO composites were characterized and the electroactive properties determined by Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, and cyclic voltammetry. The Au/ATGO composites showed excellent performance and stability as catalysts when applied for the reduction of nitrophenol to aminophenol within 225 s and the rate constant was 0.02 s-1. The activation energy for the reduction of 4-NP and 2-NP was 48.10 and 68.71 kJ mol-1, respectively. Following a recycling test repeated 20 times, the Au/ATGO composites maintained a conversion rate higher than 94%.

Palladium Catalysts Based on Porous Aromatic Frameworks, Modified with Ethanolamino-Groups, for Hydrogenation of Alkynes, Alkenes and Dienes

The current work describes an attempt to synthesize hybrid materials combining porous aromatic frameworks (PAFs) and dendrimers and use them to obtain novel highly active and selective palladium catalysts. PAFs are carbon porous materials with rigid aromatic structure and high stability, and the dendrimers are macromolecules which can effectively stabilize metal nanoparticles and tune their activity in catalytic reactions. Two porous aromatic frameworks, PAF-20 and PAF-30, are modified step-by-step with diethanolamine and hydroxyl groups at the ends of which are replaced by new diethanolamine molecules. Then, palladium nanoparticles are applied to the synthesized materials. Properties of the obtained materials and catalysts are investigated using X-ray photoelectron spectroscopy, transmission electron microscopy, solid state nuclear magnetic resonance spectroscopy, low temperature N2 adsorption and elemental analysis. The resulting catalysts are successfully applied as an efficient and recyclable catalyst for selective hydrogenation of alkynes to alkenes at very high (up to 90,000) substrate/Pd ratios.

Hierarchical porous carbon material restricted Au catalyst for highly catalytic reduction of nitroaromatics

In this study, four kinds of porous carbon materials were used as supports to anchor gold nanoparticles (AuNPs) for catalytic reduction of nitroaromatics and 4-nitrophenol (4-NP) was employed as a model material. Results identified that carbon black (CB) restricted-Au catalyst (Au/CB) provided large specific surface area, small AuNPs size, and low cost, which showed highly catalytic activity for 4-NP reduction. Besides, with the increase of Au loadings, the catalytic activity of Au/CB was enhanced and the 1.2 wt% of Au loading exhibited the best catalytic activity with the high rate of 0.8302 min^-1 and the turnover frequency of 492.50 h^-1. Universality and real water application demonstrated that the as-prepared Au/CB catalyst was promising candidate for other phenols and azo dyes reduction and had great potential for practical application. Furthermore, after ten cycles, Au/CB still retained satisfying stability and activity. These results suggested that the larger specific surface area and smaller particle size attributing to the porosity of CB were conducive to improving the catalytic activity of Au catalysts. This design shows high potential of hierarchical porous carbon materials for highly catalytic reaction in many fields, especially the water purification.